#10,503 in Tools & Home Improvement
Use arrows to jump to the previous/next product
Reddit mentions of Bondhus 10637 Set of 13 Balldriver Screwdrivers, ProGuard Finish, sizes .050-3/8-Inch
Sentiment score: 1
Reddit mentions: 1
We found 1 Reddit mentions of Bondhus 10637 Set of 13 Balldriver Screwdrivers, ProGuard Finish, sizes .050-3/8-Inch. Here are the top ones.
or
Angle entry up to 25 degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8"ComfortGrip handles are designed for maximum torque with ultimate comfort and gripTools are Made in the USA with Bondhus proprietary Protanium® steel and are up to 20% stronger than competitor toolsProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over timeLifetime warranty - we will replace it free of charge
Specs:
| Color | Multi |
| Height | 2.5 Inches |
| Length | 15 Inches |
| Number of items | 1 |
| Size | One Size |
| Weight | 2.45 Pounds |
| Width | 8 Inches |
Nice. I have had my 550 since 1995. Great machine.
I bought the spare parts kit, it is great to have on hand. Dillon will give you any of the pars on request, but it takes a couple days.
Ask for a couple bellcrank cubes for the powder measure. It is the one consumable part.
Bondhus drivers make working on the press much easier than standard L-shaped wrenches.
When removing the toolhead with the 1/4 driver, don't forget to loosen the 1/8 set screw on the side of the ram.
The UFO LED lighting kit is a great addition.
Keep the linkage greased and the shaft oiled.
Spilled powder and brass shavings will collect in the primer cup and dent primers. Watch for that and clean as necessary.
I put an 8-ball on mine for a larger handle. It is more comfortable. You may decide that you want a roller handle. If so, a cheap foam bicycle grip is a great addition. They come in pairs, the other one goes on your impact bullet puller (which you will need if you don't yet have it).
There are a great many aftermarket parts on ebay. Toolheads are cheaper than factory. There are powder measure knobs and micrometers. There are shellplate bearings and low-mass detent balls.
My Dillon .223 powder funnel did not want to flow stick powder (3031). I spun it in my lathe and radiused the transition. Problem solved.