#10 in Automotive greases
Use arrows to jump to the previous/next product
Reddit mentions of Multipurpose Grease, XHP 222 SPECIAL, 14.1 oz
Sentiment score: 2
Reddit mentions: 2
We found 2 Reddit mentions of Multipurpose Grease, XHP 222 SPECIAL, 14.1 oz. Here are the top ones.
or
- Superb resistance to water washout and spray-off
- Highly adhesive and cohesive structure
- Excellent rust and corrosion resistance
Features:
Specs:
| Height | 2 Inches |
| Length | 10 Inches |
| Number of items | 1 |
| Size | 14.1 oz |
| Weight | 0.875 Pounds |
| Width | 2 Inches |
I use high temp grease like you'd use in a grease gun to lube bearings, the particular brand is "Mobil grease xhp 222" but any decent grease should work. here's a link to the stuff I use, that lil mini grease gun thing the show in the recommended items is super fucking handy too.
https://www.amazon.com/Multipurpose-Grease-XHP-SPECIAL-14-1/dp/B009VGEEM4
But I kinda go overboard and grease all possible contact points, like where the trigger bars ride against the frame, and I'll put a dab on the rear cage then smush it in with my finger so it can get worked into all the surfaces there and slicked everything up. Basically if any 2 pieces of metal are gonna touch I like them to be greased, the firing pin gets a tiny amount of oil, like 2 drops at most, and then I cycle the gun by hand a bunch and wipe up any excess.
Some q-tips and toothpicks make applying it a lot easier, that lil grease gun is a God send though, I highly recommend it.
And yeah the best part of the comp is how bad ass it looks, my brother was flipping out like "this shit looks like something out of metal gear" lol
Super Lube 21030 Translucent White Color 3 oz. Automotive Accessories https://www.amazon.com/dp/B000XBH9HI/ref=cm_sw_r_cp_api_i_J041Cb6HXVCWF
Multipurpose Grease, XHP 222 SPECIAL, 14.1 oz https://www.amazon.com/dp/B009VGEEM4/ref=cm_sw_r_cp_api_i_v441CbAQWR8KJ
Any grease is better than none. It’s also helps quality. I use mobile grease, left over from my CNC repair days. One tube is a lifetime supply for the little you need, use a Q-Tip and apply a thin coat all the way up, Run your Z-axis all the way up and down, and apply a little every month. I use a old medication bottle to keep a small supply next to my machine. Keep the Q-tip in the bottle. When the grease turns a dirty white, just wipe away the extra and reapply. Do not use oil, that makes a mess and disappears. If you need to clean the Z axis rod and bearing, use mineral sprits on a clean rag and wipe it clean and dry, add new grease.