#1 in Automotive engine parts
Use arrows to jump to the previous/next product
Reddit mentions of NOCO GCP1 15 Amp 125V AC Port Plug Power Inlet with 16-Inch Integrated Extension Cord
Sentiment score: 4
Reddit mentions: 11
We found 11 Reddit mentions of NOCO GCP1 15 Amp 125V AC Port Plug Power Inlet with 16-Inch Integrated Extension Cord. Here are the top ones.
Buying options
View on Amazon.comor
- AC Port Plug - A 125-volt power inlet socket with an integrated 16-inch outdoor extension cord for a car, boat, marine, truck, trailer, pickup, RV, industrial and electrical applications.
- Waterproof - A rugged, waterproof ac electrical power inlet receptacle featuring a pressure fit rubberized cover rated for outdoor use and protects against the elements.
- Peak Performance - Rated at 15-amps with heavy-duty 14 AWG copper wiring to maximum power flow and full-sized AC port prongs for maximum conductivity.
- Plug-N-Play - A simple flush mount flanged power inlet that's easy to install, requiring zero cable modification or hand wiring, and mounts into a 2-inch hole size.
- Multiple Uses - An outdoor extension cord designed for various uses, including onboard battery chargers, bumpers for engine block heaters, outdoor electrical outlets, and more.
Features:
Specs:
Color | Black |
Height | 5.35 Inches |
Length | 2.6 Inches |
Number of items | 1 |
Release date | September 2012 |
Size | 16-inch |
Weight | 0.4 Pounds |
Width | 5.2 Inches |
My friend spotted this vehicle in a public parking lot in SF Bay Area.
Additional photos:
http://i.imgur.com/dfJXcn6.jpg
http://i.imgur.com/uulAUJc.jpg
http://i.imgur.com/Qrbfmxx.jpg
Anybody any more information on what this is?
edit: A few more pics:
Not radar, but IbeoLux modules: Actually 2 there are 2 on each rear side looking sideways, two more on the rear bumper looking backwards, and two more under the front headlights looking forwards. http://i.imgur.com/ez0tlee.jpg
Also, there are two rectangular panels adjacent to the front radar. (Looks like a Delphi ESR 2.5 Radar ) http://i.imgur.com/703JyDp.jpg
There are Lidars on the right side mirror too. The molding looks perfect. http://i.imgur.com/ruKO5ee.jpg
2 Garmin GPS antennas on the back roof roof corners near the rear window. http://i.imgur.com/nx0VAQh.jpg
Lastly, there is a 'NOCO Genius GCP1' power port on the front bumper, adjacent to the 80/20 beam, which is probably used to provide power to whatever additional equipment they screw into the beam. http://i.imgur.com/SqCbiMF.jpg
My conclusion is that this is NOT a Tesla prototype, rather some small company who is working on self-driving/computer vision software. I'm not sure why they would choose a Model S for this though, except perhaps because they want to sell their software to Tesla, or perhaps they are a Tesla partner which has managed to get access to the control systems for steering, braking and speed.
Charging the battery while driving is pretty simple but took me a year to figure out how simple it was. Hopefully you are planning on using a trailer wire junction box. If so, run a 14ga wire from the junction box (that connects to your truck) to the positive side of the battery. Add something like this inline between the junction and the battery for safety. https://www.amazon.com/Fastronix-Automatic-Reset-Circuit-Breaker/dp/B07NSD3KYH
For shore power, I used one of these on the side of the camper which then runs to a 2 amp charger that charges the battery. In hindsight, I should of done a 4 or 5 amp charger.
https://www.amazon.com/NOCO-GCP1-16-Inch-Integrated-Extension/dp/B009ANV81S
​
Solar, do as other have said and get a controller.
I did spraypaint them with a metallic gold (they were black). I put an old jack in there to keep paint from seeping into the input itself. The power input was on Amazon and the paint job definitely adds a little steampunk/vintage vibe, since it didn't coat the rubber it looks kind of tarnished.
https://www.amazon.com/gp/product/B009ANV81S
like this
For basic 15 amp power, I run something similar to this: https://www.amazon.com/NOCO-GCP1-125V-Integrated-Extension/dp/B009ANV81S/ref=sr_1_1?s=automotive&ie=UTF8&qid=1537219599&sr=1-1&keywords=15+amp+power+inlet
I plan on someday, maybe, running a 30 or 50 amp service through the wall.
here it is
I didn't get a working link to the FB page on your progress, but just let me know your TNTTT account handle and I'll pop over there to look. One other thing - of the several 120V inlets out there, this one is the best behaved so far. The only caveat is that you'll have to trim the idiot-proofing rubber nub off your extension cord receptacles.
https://www.amazon.com/NOCO-Genius-GCP1-Black-125V/dp/B009ANV81S/ref=pd_bxgy_200_img_2?ie=UTF8&psc=1&refRID=X6SE3S6B3876Q0A3TDS0
I think I might understand you... would something like this do what you are envisioning?
https://www.amazon.com/NOCO-GCP1-125V-Integrated-Extension/dp/B009ANV81S
Would recommend getting that plug mounted up into the lower grille or bumper before the winter hits, otherwise it's going to be a corroded mess. NOCO is a nice option, it's the one I have.