Reddit mentions of Quentacy Momentary Push Button Switch 1NO1NC Waterproof Silver Stainless Steel Shell 12V LED Ring Switch with Wire Socket Plug Suitable for 19mm 3/4 Mounting Hole (Blue)

This is my parts list.... Simple and it works

The enclosure I used: https://www.amazon.com/dp/B07TS6RY85/ref=cmswrcpapaiAyhxDbV7EHBCN

The 5A power supply (5A and you don't have to use a mosfet): https://www.amazon.com/dp/B01461MOGQ/ref=cmswrcpapaiGzhxDbQWPT5QR

I used a glass slide tube for inside of the coil. You will have to rewrap the coil on the IH to fit around the slide, not hard at all: https://www.amazon.com/dp/B001FWYAWQ/ref=cmswrcpapaiMAhxDbTK5P2YY

The actual IH: https://www.amazon.com/dp/B01GDVVANA/ref=cmswrcpapailChxDb0DGE3TM

The 5v switch w/ wiring harness (you don't need any extra wires this way): https://www.amazon.com/dp/B075QBJVTS/ref=cmswrcpapaifDhxDb7HTYE19

A Unibit would be a good thing to have to get the 3 holes drilled in the box. A hotglue gun and a screwdriver and your set....

Saw a similar issue with mine when I first set it up - switch worked but no lit led.

My issue of course was a wiring problem. For the led to be activated you need to make sure that the additional led connections are made too. This will depend upon the switch you used of course but if you are using something like this https://www.amazon.com/Quentacy-Momentary-Waterproof-Stainless-Suitable/dp/B075QBJVTS?ref_=ast_bbp_dp then check the wiring diagram for program 1. My mistake was I missed that the NO (Normally Open) and the positive LED legs should be shorted to each other. Since mine had a wiring harness I just connected both wires to the positive connection of the zvs unit.

Hope your led issue is a simple fix like mine

BTW I like how you were able to fit it into that compact case, looks cool

Well if you must know, Its a cremation box, usually sold for $20-30 on ebay. The Heating module and coil costed 13.00 from https://www.amazon.com/gp/product/B01GDVVANA/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1 The Button costed me 9.99 here https://www.amazon.com/gp/product/B075QBJVTS/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1 and the power supply costed me 11.11 https://www.amazon.com/gp/product/B07NR6FPN9/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1


With shipping and Best offer accepted, i think im doing justice here. These were the best prices i could find at the time from MULTIPLE vendors. I have a Portside Mini in the mailbox tomorrow and THIS box has NEVER failed me in the last few months since built. It is a work in progress yes. It can be expanded and definitely worked on to make it much better. I would of taken $50 which is what they USUALLY sell for but i started it at 75.00. Im sure it will cost me about 7-10 to ship when wrapped properly. Not loony at all.

https://www.amazon.com/API-ELE-Momentary-Waterproof-Stainless-Self-Reset/dp/B079GNNSRP/ref=mp_s_a_1_2?ie=UTF8&qid=1541366661&sr=8-2-spons&pi=AC_SX236_SY340_QL65&keywords=waterproof+push+switch&psc=1

https://www.amazon.com/Quentacy-Momentary-Waterproof-Stainless-Suitable/dp/B075QBJVTS/ref=mp_s_a_1_16?ie=UTF8&qid=1541366661&sr=8-16&pi=AC_SX236_SY340_QL65&keywords=waterproof+push+switch&dpPl=1&dpID=410iuxGxhhL&ref=plSrch

https://www.amazon.com/TOTOT-Automatic-Self-Reset-Waterproof-Dustproof/dp/B07C4T6XT5/ref=mp_s_a_1_19?ie=UTF8&qid=1541366780&sr=8-19&pi=AC_SX236_SY340_QL65&keywords=waterproof+push+switch&dpPl=1&dpID=41UbL7CKvtL&ref=plSrch