#516 in Automotive
Use arrows to jump to the previous/next product

Reddit mentions of Robinair (15310) VacuMaster Single Stage Vacuum Pump - Single-Stage, 3 CFM

Sentiment score: 3
Reddit mentions: 7

We found 7 Reddit mentions of Robinair (15310) VacuMaster Single Stage Vacuum Pump - Single-Stage, 3 CFM. Here are the top ones.

Robinair (15310) VacuMaster Single Stage Vacuum Pump - Single-Stage, 3 CFM
Buying options
View on Amazon.com
or
    Features:
  • Robinair's VacuMaster Single-Stage Vacuum Pump is designed for air conditioning and refrigeration service; featuring a single stage rotary vane design, 8.5 ounce oil capacity, and non-skid feet
  • 3 CFM free air displacement; factory rated to 75 microns
  • 1/4 HP, 110V/60Hz thermally protected motor
  • Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
  • 1/4 inch flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir
Specs:
ColorSILVER
Height10 Inches
Length13.2 Inches
Number of items1
Weight15.7 Pounds
Width4.8 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 7 comments on Robinair (15310) VacuMaster Single Stage Vacuum Pump - Single-Stage, 3 CFM:

u/[deleted] · 5 pointsr/CannabisExtracts

This has been asked a thousand times, at least twice this past week. Please use the search next time. Anyway I'll just copy and paste my last response:

I would go for this chamber:
http://www.ebay.com/itm/Vacuum-and-Degassing-chamber-1-5GL-/221257099507?pt=BI_Pumps&hash=item3383f368f3

If not this one, then a stainless steel one, the bell plastic chambers are not good if you have a heat pad or something in it.

Go for this vac pump:
http://www.amazon.com/gp/aw/d/B005CO9GX6/ref=mp_s_a_1_5?qid=1375793140&sr=1-5&pi=AA160
You could get one cheaper there on amazon or eBay, it's up to you, but I recommend a 3 CFM pump or higher.

This hot plate is battery powered, fits in the chamber, and can keep a pretty good constant low temp:
http://www.amazon.com/Aroma-AHP-303-Single-Plate-Black/dp/B0007QCRNU/ref=sr_1_1?ie=UTF8&qid=1375192614&sr=8-1&keywords=battery+hot+plate
Hopefully this gets you started in the right direction, there are many many options for a nice vac set up, I'm sure if you look around you'll find good deals.

u/mookie710 · 5 pointsr/CannabisExtracts

Don't waste your time on a brake bleeding kit. Hand pumps take constant strenuous pumping to reach -29mm/hg and they aren't meant for that sort of constant use. I went through 3 hand pumps that each lasted a maximum of 3 weeks before I sucked it up and bought an electric pump. You can find them on amazon for around $100. Best purchase I've ever made.

Here's a 3.0 cfm single stage robinair that would be more than sufficient (I use a 1.5 cfm and it pulls the necessary vac in seconds). http://www.amazon.com/Robinair-15310-VacuMaster-Single-Stage/dp/B005CO9GX6/ref=sr_1_7?ie=UTF8&qid=1343111350&sr=8-7&keywords=vacuum+pump

u/Silound · 3 pointsr/turning

If you can afford them, an older US-made RobinAir pump is considered by many to be the highest quality pump you can buy, but they're not cheap. For stabilizing, I use a modern RobinAir 15310 that I bought on Amazon for $70 on sale. It works fine, although it does blow a fine oil mist into the air occasionally (use it outside).

I also have two Glass Vac chambers from Best Value Vacs (purchased on Amazon) in 3 & 5 gallon sizes. Perfect for pouring in a gallon or two of resin and stabilizing anything up to about 10" in diameter. The aluminum pots are easy to empty and clean after stabilizing.

The only downside is that I can't stabilize long pieces, since it has to fit reasonably in the pot and be submerged, but 90% of what I do is small project blanks.

u/Trensformer · 2 pointsr/steroids

This one works for me. I've used it for filtering gear and purging THC wax I made when I was growing. That reminds me I need to start growing again. -_-

u/dankpants · 2 pointsr/CannabisExtracts

I suggest another lower end pump from robinair

at full vacuum thc and terps will boil off below room temperature

u/fictor-de-universum · 1 pointr/CannabisExtracts

http://www.amazon.com/Robinair-15310-VacuMaster-Single-Vacuum/dp/B005CO9GX6/ref=sr_1_3?ie=UTF8&qid=1451465073&sr=8-3&keywords=robinair+vacuum+pump

What is missing in terms of accessories in this deal? It's super affordable so seems worth it if I only need to buy hoses or whatever?