Reddit mentions of Tattu LiPo Battery Pack 1300mAh 45C 3S 11.1V with XT60 Plug for RC Car Boat Truck Heli Airplane

> Eachine Wizard x220

Tattu makes some good batteries, both 3s and 4s.
https://www.amazon.com/Tattu-Battery-1300mAh-11-1V-Airplane/dp/B013I9RLVK/ref=sr_1_6?s=toys-and-games&ie=UTF8&qid=1495748569&sr=1-6&keywords=3s+lipo+battery

I have 3 Lumenier lipos and each one is great. Mine are 1850 3s, 2250 3s, and 2250 4s. For your size I wouldn't go past 1850 (and even that's a little long), they get pretty big and heavy after that. Worked good on my 280, but obviously that much bigger than a 220.

What kind of capacity do you need? Maybe buy or make a 3sXp Li-Ion battery that has however many in parallel you want to fulfill your physical size/capacity requirements.Great Scott has a really great video on him making this but you can buy pre made packs too like these:
(Note that with any of these packs you will need a balance charger or a BMS that has charging function)
https://www.amazon.com/Tattu-Battery-1300mAh-11-1V-Airplane/dp/B013I9RLVK/ref=mp_s_a_1_5?keywords=3s&qid=1572316137&sr=8-5

https://www.amazon.com/FLOUREON-Packs-1500mAh-Battery-Truggy/dp/B074PPMFMC/ref=mp_s_a_1_24_sspa?keywords=3s+lithium+ion&qid=1572316188&sr=8-24-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFUSEcwSDg5RFlGQiZlbmNyeXB0ZWRJZD1BMDI1NzY2ODIxM0IwTURRTlU3MlcmZW5jcnlwdGVkQWRJZD1BMDg3MjQwNjM4VkJGREQ1QVpNQTQmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

I use this battery for my stryfe with hellcats and it has worked great for me.

https://www.amazon.com/Tattu-Battery-1300mAh-11-1V-Airplane/dp/B013I9RLVK/ref=sr_1_1?ie=UTF8&qid=1497552006&sr=8-1&keywords=tattu+3s

Amazon is great especially if you get fast shipping. Local hobby shops near you would also sell batteries, but they would be more expensive. However honestly, a local hobby shop most likely would sell batteries with banana plugs, and I don't think pre-made adapters that go from banana plug to XT30 exist premade, while you can easily find XT60-XT30 adapters. You will also need to buy a balance charger to charge your new batteries. These chargers make sure all the cells in your batteries are charged to equal voltages, which is important in terms of safety and increasing the longevity of your batteries. I ordered my own batteries and charger from Amazon and they arrived in a couple of days, so if you're comfortable with using Amazon there's nothing wrong with the batteries there. Heres an example of one https://www.amazon.com/Tattu-Battery-1300mAh-11-1V-Airplane/dp/B013I9RLVK/ref=sr_1_2?ie=UTF8&qid=1485569927&sr=8-2&keywords=3s+1300mah

It should of came with one. Did you get the $200 one? Best bet would be Amazon 3 days.

(3 s)[https://www.amazon.com/gp/aw/d/B013I9RLVK/ref=mp_s_a_1_1?ie=UTF8&qid=1486858191&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=3s+lipo+battery&psc=1]

(4s)[https://www.amazon.com/gp/aw/d/B013I9RSEU/ref=mp_s_a_1_3?ie=UTF8&qid=1486858270&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=4s+lipo+battery&dpPl=1&dpID=41BMq3RoUYL&ref=plSrch]

Your receiver has to be the same protocol as your transmitter.
The battery you chose must have the same plug as your ESC (I use XT60, probably the most common). You can actually solder new connectors onto your battery or ESC but this can be a bit dangerous if you're inexperienced.
Those are pretty much the only two compatibility issues you may run into. Use a known powerplant (motor/prop combo) if you're inexperienced as pairing motors and props can get a bit complicated (kV, prop, power, battery voltage all are factors). The 2200kv turnigy motor with a 6x4 prop plugged into a 30A esc on 3 cells is tried and true.
For example these would work together: motor, ESC, Battery.
Good luck.

Amazon makes a huge difference, price wise. What is your budget on a battery/charger?

Cheapest LiPo Charger- $22

3s 45c LiPo - $14

This a really cheap setup that will give you all the power you need.

Battery: Floureon 2 Packs 3S 11.1V 2200mAh 25C RC is too heavy and too weak. Your 4 motors + 5045 triblades will draw up to 24Ax4=~100A of current and battery nominal capability is up to 2,2x25C=55A. Look for 1300mAh 45C or even better 65C.
For instance this Tattu battery:
https://www.amazon.com/Tattu-Battery-1300mAh-11-1V-Airplane/dp/B013I9RLVK/
Or even better this one:
https://www.amazon.com/Tattu-Battery-1300mAh-11-1V-Airplane/dp/B013I9SYC0/
These batteries are really good ones, will give you more punch than Floureon ones.

FC: Naze32 is a bit yesterday. If it is your first quad then probably you can use it. Better use SP Racing F3, like this one:
https://www.amazon.com/Makerfire-Flight-Controller-SPRacing-Deluxe/dp/B01JS1Z38A