#18 in Sanders
Use arrows to jump to the previous/next product
Reddit mentions of WEN 6369 Variable Speed 5 Amp Drywall Sander with 15' Hose
Sentiment score: 1
Reddit mentions: 3
We found 3 Reddit mentions of WEN 6369 Variable Speed 5 Amp Drywall Sander with 15' Hose. Here are the top ones.
Buying options
View on Amazon.comor
- Variable speed adjustment operates anywhere from 600 to 1500 RPM
- Hook-and-loop base pad makes changing sandpaper easier than ever
- 5-Amp head-mounted motor provides maximum torque to the sanding disk
- Automatic dust removal system combined with the 15-foot dust hose minimizes Clean-up
- Includes 60, 80, 120, 150, 180 and 240 grit hook-and-loop 9-inch sanding discs
Features:
Specs:
Height | 15.75 Inches |
Length | 58.75 Inches |
Number of items | 1 |
Weight | 9.2 Pounds |
Width | 10 Inches |
We scraped our entire house. What we did:
We did try the just-a-sander approach. Eventually you'll mess up and push too hard, and create a bare drywall spot, making the surface completely uneven.
The process wasn't difficult, just really time consuming. We even had vaulted ceilings that required a really tall ladder. While going through this you think it's not worth the effort, but then you see the finished product, and are glad you did it.
I dealt with a similar issue when removing paneling from level 1 drywall in my home, and found a method that worked for me. Remove as much adhesive as possible with a scraper (a little damage to the facing is okay as long as you don’t gouge down to the gypsum). Then use a drywall sander with a 36-grit disk like this one and take it down a bit more to smooth things out.
WEN 6369 Variable Speed 5 Amp Drywall Sander with 15' Hose
https://www.amazon.com/dp/B01HRL9XYI/
Do any needed patches and repairs (gouges, holes, etc) and then roll the surface with a primer sealer (I used PPG). A good tip is to have some black added to the primer to add contrast. Then skim coat the surface with thinned out compound to get back to a nice, smooth finish. Prime and paint.
In my case it was more labor than doubling up or replacing the Sheetrock, but I just decided I didn’t want to deal with hauling all that drywall if I didn’t have to. For a ceiling I think it would probably be a worthwhile way to go (my shoulder doesn’t like taping overhead anymore).
For the skim coat, I rolled thinned premix on with a half inch roller, and scraped with a squeegee trowel like this (I used the 14” and 22” ones)
https://www.amazon.com/dp/B00CCGEDOE/
WEN 6369 Variable Speed 5 Amp Drywall Sander with 15' Hose https://www.amazon.com/dp/B01HRL9XYI/ref=cm_sw_r_cp_tai_i9cWDbGYC9GRH