Reddit mentions: The best skateboard risers
We found 15 Reddit comments discussing the best skateboard risers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Loaded Boards 1/16" Drop-Through Shock Pads for Longboard Skateboards
- Loaded Shock Pads set of 4
Features:
Specs:
Color | 1/16" Drop-through Shock Pads |
Size | One Size |
Weight | 0.11875 Pounds |
2. no!no! Rubber Skateboard Riser Pad 1/8 3Mm Pack of 2 Orange
pack of 2pcs, enough for one skateboardRubber riser padshock pad
Specs:
Color | Orange |
Weight | 0.08 Pounds |
3. flatland3d Extended Riser for Boosted
Injection molded ABSCan be stacked with Bash Guards for more ground clearance
Specs:
4. Longboard Riser Pads and Hardware 1/4" (6mm) Black Risers and 1 1/2" Bolts
2 1/4" Longboard Risers1 1/2" Hardware Kit
Specs:
Height | 5.98 Inches |
Length | 0.98 Inches |
Weight | 0.36875 Pounds |
Width | 4.02 Inches |
5. Arbor Shock Skateboard Riser Pad, 1/8-Inch
- Made from recycled plastic
- Designed to allow you to fine tune your deck height
- Available in 1/8" or 1/4"
Features:
Specs:
Size | 1/8-Inch |
Weight | 0.12 Pounds |
6. VJ Longboard Skateboard Riser Pads, Rubber, Set of 2, Size 3mm (1/8") 6mm (1/4") 12mm (1/2") 14mm Angle Wedge Riser Pads, Black (6mm)
- 6mm (1/4") RISER PADS DIMENSIONS: 7.7cm x 5.5cm x 0.6cm (L x W x H)
- SET of TWO: Black Riser Pads are sold in sets of two
- RUBBER MATERIAL: These high-quality skateboard pads are made of rubber. Provides additional clearance and helps prevent wheel bite
- VARIETY SKATEBOARD RISER PADS OPTIONS: We have many options, such as standard shock pads 3mm, 6mm, 12mm, 14mm and angle wedge riser pads.
Features:
Specs:
Color | black |
Height | 0.4724409444 Inches |
Length | 3.0314960599 Inches |
Size | 6mm |
Width | 2.1653543285 Inches |
7. Dime Bag Hardware Angled Wedge Rubber Riser Pads 5/16"-9/16" (8mm-14mm)
- Hold your camera down low or high when filming skiing, snowboarding, skateboarding, auto racing, motocross, BMX/FMX, sporting events and even when boating.
- Cushioned finger groove padded foam handle alleviates the stress of lengthy filming and provides a secure grip, as well as non-slip rubber rails for further securing your camera.
- Made out of high-grade heavy duty ABS impact-absorbent plastic which can handle the toughest abuse.
- Removable accessory shoe mount on the top, which can hold your video light, camera flash or external microphone.
- COMPATIBILITY: Most DSLR, mirrorless, video cameras and other cameras with an 1/4-20 standard tripod hole.
Features:
Specs:
Color | Black |
Height | 1 Inches |
Length | 2 Inches |
Weight | 0.125 Pounds |
Width | 2 Inches |
9. TROUBLE SKATEBOARDS Riser Pads Rubber Risers 12mm 1/2" Set of 2 (R3) (12mm 1/2")
- Rubber Riser Pad Shock Pads Set for Skateboards & Longboards.
- 3 Sizes: 3mm 1/8”, 6mm 1/4” and 12mm 1/2” Dual Bolt holes for sizing options
- Absorb impacts from the most intense skateboarding Prevent Wheel bite Minimize vibration which helps to prevent hardware from getting loose & breaking down Preventive toward pressure cracks as well
- Trouble Skateboards has been a manufacturer & distributor of high performance skateboarding decks and accessories since 1996.
- ★ Click the blue “Trouble Skateboards” link located next to the title to check all our decks, trucks, grip tape, bearings, hardware, wheels and accessories.
Features:
Specs:
Size | 12mm 1/2" |
10. New Set of 2 Longboard 1" Riser Pads for Longboard Truck Risers Black
- Set of replacement 1" Risers
Features:
Specs:
Height | 1.5 Inches |
Length | 5.4 Inches |
Weight | 0.22 Pounds |
Width | 5.3 Inches |
🎓 Reddit experts on skateboard risers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where skateboard risers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Hmmm interesting thought. I'll run through my though process on it, kinda stream of conscious:
Clamping is a really good idea. I like the simplicity. It's flexible and lets you move the machine easily. I don't have the overhang on my desk necessary to clamp mine.
I did try a couple different materials VHB'd to the bottom of the 80/20 runners including a high and low density rubbers and a dense rubber backed wet/dry carpeting like you would find in a mud room. The low density rubber caused massive sway, high density rubber(urethane), which was effectively a plastic was loud. As in, the machine didn't rock, but it hit some frequency with the 1" thick desk and was just loud. The carpet was actually really nice, kept the noise down and slid nicely across the desk, but the whole top of the machine swayed just from the mass.
Clamping straight to a table/desk has the possibility of hitting resonant frequencies on jerky moves. What I would probably do is either get some rubber gasket material, which you can buy in squares at you local hardware store or some 1/8" rubber Skateboard Risers and cut them into smaller pieces. Place them between the table and your machine's feet and between the clamp and the machine.
That's just off the top of my head, it would be easy to try. It might work, it might not.
If you purchase the board with the extended range battery already installed on the board the extended risers should be installed.
if you purchase the board with standard range and added the extended range as an upgrade item the risers will be included with the extended range battery which you would have to install.. if you have flatland3d bash gaurds check this out ..
flatland3d Extended Riser for Boosted https://www.amazon.com/dp/B07BSSQLZQ/ref=cm_sw_r_cp_apa_1Zv1AbZKD7H5Attery hope this helps you
Hi again, I've been skating for about a month now, but have nerded-out on all of the technical aspects of skating. Also, sorry for the late response.
Softer, larger wheels are always better for rougher terrain, as they have some give; reducing vibrations (giving you a smoother ride), and minimizing damage to the contact patch (the part of the wheel directly in contact with the ground), as well as hanging up less on cracks and imperfections in the ground. And yes, the 60mm SharkWheels are extremely soft, coming in at 73 on the "A" durometer scale. Also, installing the shock/riser pads is exremely straight forward. Just remove the screws that attach your trucks to the deck, and place the pads inbetween the trucks and the deck when you re-attach them. Since using riser pads increases the space between the top of your mounting hardware, and the bottom of the truck baseplate, you'll need some longer screws. (I know I said you'd need 1/8" risers, but you'll actually need 1/4" ones. Here's a link to a set of risers and new screws: https://www.amazon.com/Longboard-Riser-Hardware-Black-Risers/dp/B01GVYLLDS?ref_=Oct_CARAsinC_3416211_2&pf_rd_p=615a1383-c417-5ea4-9e60-3dea50680d38&pf_rd_s=mobile-hybrid-5&pf_rd_t=30901&pf_rd_i=3416211&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=23AB060KWQ2M6XTT79SF&pf_rd_r=23AB060KWQ2M6XTT79SF&pf_rd_p=615a1383-c417-5ea4-9e60-3dea50680d38)
About changing boards, you don't need to buy a new skateboard unless the deck has cracked or snapped, the nose and tail have been ground down to a razor edge, or the deck plys have delaminated. If you want to improve the quality of the wheels that you have, I suggest cleaning or replacing the bearings in their core. Also, when you remove your wheels from the truck axles, make sure to keep the two speed rings that are on the axle. Depending on the wheels you have, there may be a metal spacer between the bearings. If there is no spacer, you'll want to purchase a set of bearing spacers, since they allow you to tighten your axle nuts all the way down, and reduce damage to bearing races since they properly allign the inner races. Here's a link to the spacer set I used, which also come with replacement speed rings:
https://www.amazon.com/Fireball-Spacers-Washers-Skateboards-Longboards/dp/B01GIGU2SE/ref=sxin_2_ac_m_pm?keywords=bearing+spacers&pd_rd_i=B01GIGU2SE&pd_rd_r=8f7f6dbf-9e1d-4fe8-b773-f88fd58cb1b6&pd_rd_w=XHSmr&pd_rd_wg=JYzjS&pf_rd_p=52ddbacc-f25e-4731-abd8-005c535b500a&pf_rd_r=WYCXRWENHXVGEBSRAHYH&qid=1562015024&s=gateway&sprefix=beating+spacer
Aandd here's two videos that detail the entire bearing removal/cleaning process from start to finish:
https://youtu.be/QqSOBvVDNwQ
https://youtu.be/epLPX7sRQXI
Side note: The "A" and "B" durometer scales are used to measure wheel hardness. The higher the durometer, the harder the wheel. Both scales start at 73, and max out at 100, with the "B" scale being 20 points lower that the "A" scale for a wheel of the same hardness (a 100B wheel would be equivalent to a 120A wheel).
Hope this helped :)
Could always do amazon, may be way easier in the long run
It's pretty noticable regarding turning. Also, the big wheels might be the smoothest ride / commute that I've ever had... Setup:
Oldboy Premium Ceramic Bearings for Longboard, Skateboard, Quad Skate, Inline Rollerblades or Scooter Wheels https://www.amazon.com/dp/B075QLMQW6/ref=cm_sw_r_cp_apa_i_lCj3Cb4M58RXY
Tensor Mag Light Skateboard Truck - Silver/Red - 5.25 https://www.amazon.com/dp/B07NNRW55H/ref=cm_sw_r_cp_apa_i_4Dj3CbQZENCH8
Orangatang Caguama 85 mm 77a Longboard Wheels for Cruising, DIY Electric Skateboards, Eboards (Blue, Set of 4) https://www.amazon.com/dp/B07M59PQSN/ref=cm_sw_r_cp_apa_i_9Ej3CbBKDBPEQ
Board
https://www.tristarskateboards.com/skateboards/decks/pop-shape/chocolate/cleveland-chunk-deck-pid-11357
Dime Bag Hardware Angled Wedge Rubber Riser Pads 5/16"-9/16" (8mm-14mm) https://www.amazon.com/dp/B00JXVG3WG/ref=cm_sw_r_cp_apa_i_pJj3CbN0BRAW8
TROUBLE SKATEBOARDS Riser Pads... https://www.amazon.com/dp/B07HDT7JZ7?ref=ppx_pop_mob_ap_share
I used two sets of 1/2" and one 1/4" for my floamies, I think I'd have been okay without the 1/4" but I wanted to be extra safe from wheel bite.
Abec 11 Classic Thanes in 81a. So would I want something like this or this?
yes slower speeds its nice but when you go fast or need to brake really fast its like a trampoline. On the marbel i forgot i switched the riser pads with rubber shock pads and it takes some of the edge off the bumps and cracks. When the m1 comes i'll do the same.
http://www.amazon.com/Arbor-Shock-Skateboard-Riser-8-Inch/dp/B00J5J6OIO/ref=sr_1_1?ie=UTF8&qid=1458489683&sr=8-1&keywords=shock+riser+pads
I took then off they hard plastic dude, I was taking about putting new ones like these
https://www.amazon.com/dp/B01BEF91D6/ref=cm_sw_r_cp_api_i_iBI5CbR9N0TJD
https://www.amazon.com/LUCKY-RISERS-Skateboard-Shock-Riser/dp/B00BTN0ZIE/ref=sr_1_fkmr0_2?ie=UTF8&qid=1536453998&sr=8-2-fkmr0&keywords=lucky+risers+white
I bought these from my local skate shop for $1.
http://www.amazon.com/Longboard-Riser-Truck-Risers-Black/dp/B00B2Q4PK2
im joking, get 1/8 or 1/4 shocks.