Reddit mentions: The best stack paper trimmers
We found 26 Reddit comments discussing the best stack paper trimmers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 12 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. HFS (R) Heavy Duty Guillotine Paper Cutter -12'' (12'' Paper Cutter)
- [Size]: Heavy Duty Guillotine Paper Cutter -12'‘, Base Size: 21" x 15" x 1 1/2” Overall Size: 21" x 15" x 13 1/2" (including cutting bar) Maximum Cutting Width: 12";
- [Maximum Cutting Capacity]: 400 Sheets (for 2.85oz Letter Paper), The HFS Stack Guillotine Cutters are able to slice through 400 sheets (1.5" thick) in one pass. The built-in heavy-duty clamp puts even pressure across the entire cut area to eliminate paper shift and drag. This model features a 12" cut length from front to back, large enough to cut posters and larger books.
- [Solid Steel Construction]: Solid steel construction ensures this cutter will last a long time, and you'll be able to tell the moment you pick it up. Rubber feet at each corner stop the cutter from sliding during use, and a removable handle allows for easier storage.
- [Hardened Steel Blade]: The hardened steel blade comes razor sharp, but is also easily replaceable as it wears down over time. Professional knife sharpening services can bring life to old blades, or you can purchase new ones separately from HFS.
- [Replacement Parts & Aftersales Service]: The replacements parts and operation instructions are available if needed.
Features:
Specs:
Height | 10 Inches |
Length | 24 Inches |
Number of items | 1 |
Size | 12'' paper cutter |
Weight | 36.6 Pounds |
Width | 17 Inches |
2. LETION 66 A4 Paper Trimmer Titanium Scrapbooking with Automatic Security Safeguard for Standard Cutting of Paper, Photos or Labels, Black
Designed to cut A2 A3 A4 A5 paper, photos, labels, cards and more, The trimmer can cleanly cut through thicker materials with easeCapable of cutting a 45-degree to 90-degree angle, Features sharp trimming mechanism and ruler precision measurements for perfect scaled trimmingThe guillotine cutter inc...
3. Flexzion Guillotine Stack Paper Trimmer Cutter 12 Inch A4 Professional Industrial Heavy Duty Scrapbooking Metal Base Trimming Machine 400 Sheet Capacity for Office Commercial Photocopy Printing Shop
- Extra long cutting handle bar increases leverage - Cut as much as 400 sheets of paper effortlessly
- Easy to Operate, Sturdy, Heavy Duty Construction
- Non Skid pads for table top use
- Optional Heavy Duty, Well Balanced, Sturdy Stand
- Professionally machined and assembled steel blade rail and sturdy blade assembly
Features:
Specs:
Color | Beige |
Height | 10 Inches |
Length | 24 Inches |
Size | 12" Paper Cutter |
Weight | 35.6707939916 Pounds |
Width | 18 Inches |
4. Paper Trimmer, 18", 18 Sheet Capacity, Brown/Black, Sold as 1 Each
Solid-wood base guillotine style trimmer.
Specs:
Color | Brown/Black |
Height | 22.04 Inches |
Length | 6.29 Inches |
Weight | 19.68 Pounds |
Width | 29.52 Inches |
5. Amzdeal Heavy Duty Manual Guillotine Paper Cutter Trimmer Machine (17inch -A3)
All heavy duty steel baseEasy control cutting handle barClamp wheel for better holding the thick papersRuler in inches and clear embossed grid for precise cuttingAdjustable backstop with lock for holding paper well
6. Westcott 15106 12" TrimAir Titanium Wood Guillotine Paper Trimmer
Attractive, contemporary design featuring a natural wood baseEasily slices through 30 sheets of 20lb paper at a timeProprietary titanium bonded blade technology keeps the blade sharper longerSafety guard for added protectionComfortable ergonomic handle features anti-microbial protection. Dimensions ...
Specs:
Color | Black |
Height | 23.5 Inches |
Length | 5.1 Inches |
Number of items | 1 |
Release date | April 2018 |
Size | 12-inch |
Weight | 1 Pounds |
Width | 16.3 Inches |
7. Design Toscano SP0427 Desk-Sized Guillotine,silver,Desk Size
Dimensions: 5"Wx4"Dx5.5"H 1 lbs.Quality foundry cast iron collectible crafted using age old techniquesEach piece is individually hand-finished by our artisansExclusive to the Design Toscano brand and perfect for your home or gardenIncludes a harmless chopping blade
Specs:
Color | Silver |
Height | 5.5 Inches |
Length | 4 Inches |
Number of items | 1 |
Size | Desk Size |
Weight | 2.425084882 Pounds |
Width | 5 Inches |
8. Yescom 400 A3 Sheet Capacity, 17" Cutting Length Industrial Guillotine Paper Trimmer Cutter Stack Heavy Duty Steel Base
- [Multi-Size Cutting]: 28 3/4" x 24 7/16" x 13 3/16" Paper cutter provides 17” maximum cutting length to support trimming A3, B4, A4, B5, A5, B6, B7 papers and other paper sizes that are smaller than A3(16 9/16" x 11 11/16"); cutting capacity for allowing cutting 400 sheets of papers simultaneously
- [Accurate Ruler]: Alignment grid and millimeters/inches ruler on the trimmer base help measuring accurately; specific sizes of A3, B4, A4, B5, A5, B6 and B7 for providing easy and neat cutting, just adjust the paper backstop and tighten the knob to fix it to the position you want
- [Durable & High Efficiency]: Heavy duty solid steel construction for ensuring stability and durability, easy to clean and maintain, perfect for frequent use; sharp guillotine blade and longer ergonomic handle for cutting the paper with less labor and fast speed
- [Safe & Easy to Use]: Adjustable backstop for holding paper well and adjusting the right position for paper size; easy-lock safety lever prevents cutting until released, providing enough safety protection; plastic cover of cutting port for holding cutting blade and avoiding injury; non-skid rubber feet for tabletop use
- [Wide Application]: Widely used on cutting ledger papers, thick books, photos, menu, magazines and other paper DIY handicrafts; ideal for use at home, office, school, photo studio, etc
Features:
Specs:
Height | 13.2 Inches |
Length | 28.7 Inches |
Number of items | 1 |
Weight | 45.4 Pounds |
Width | 24.4 Inches |
9. Dahle 561 Premium Series Guillotine, 14 1/8" Cutting Length, Cuts Up to 35 Sheets of Paper at a Time, Self-sharpening Blade Made of Solingen Steel, Automatic Paper Clamp, Sturdy Wooden Base
Ground, self-sharpening blade made of Solingen steel provides a clean, burr free cutVersatile - Perfect for cutting mat board & thicker stacks of paperRotating safety guard automatically covers blade throughout the entire cutting processErgonomically contoured handle reduces fatigue from repetitive ...
Specs:
Color | Blue |
Height | 7.5984251891 Inches |
Length | 27.7559054835 Inches |
Weight | 13.76345901666 Pounds |
Width | 17.4015747854 Inches |
10. Mophorn Paper Cutter 12Inch A4 Commercial Heavy Duty Paper Cutter 300 Sheets 45HRC Hardness Stack Cutter Metal Base Desktop Stack Cutter for Home Office (A4, 12Inch/45HRC Blade Hardness)
- Accurate Paper Cutting: Cutting Width: 30 cm / 12", Cutting Paper Thickness: 0.5-4 cm(300 sheet of 20LB), Blade Hardness: 45HRC, Product Size: 25 X 14.3 X 16" / 63.5 X 36.3 X 40.6 cm.
- Premium Quality: The manual paper cutter mainly adopts metal structure, sturdy and durable. The blade uses a sharp, thickened steel knife with fast cutting speed and high efficiency.
- Extra Long Handle: The longer handle is more ergonomic than the ordinary handle. According to the lever principle, it is more labor-saving, easy to cut, and with higher efficiency.
- Efficient Cutting: The paper-pressing device of the paper cutter guillotine can effectively prevent the cutting paper from slipping, especially for PVC materials or business cards with prominent effects.
- Multiple Application: This manual guillotine paper cutter is ideal for cutting paper, coupons, labels, etc. For both commercial & professional use in the office, laboratory, industry, etc.
Features:
Specs:
Height | 25.3 Inches |
Length | 17.4 Inches |
Number of items | 1 |
Release date | November 2021 |
Size | A4 |
Weight | 40.7 Pounds |
Width | 10.7 Inches |
11. Konig Large Paper Cutting Guillotine Machine
- Professional paper cutting machine
- Cuts paper up to A3
- Acrylic safety blade shield
- Paper Clamp
- Cutting measurement guide
Features:
Specs:
Height | 29.53 Inches |
Length | 250 Inches |
Release date | November 2010 |
Width | 161.42 Inches |
12. HFS 17" Blade A3 Heavy Duty Guillotine Paper Cutter (A3-17'' Paper Cutter)
- [Size]: Base Size: 25.5" x 19.25" x 2”, Overall Size: 25.5" x 19.25" x 12.75" (including cutting bar), Maximum Cutting Width: 17”, Maximum Cutting Capacity: 400 Sheets (for 2.85oz Ledger Paper) (1.5" thick)
- [Maximum Cutting Capacity]: 400 Sheets (for 2.85oz Letter Paper), The HFS Stack Guillotine Cutters are able to slice through 400 sheets (1.5" thick) in one pass. The built-in heavy-duty clamp puts even pressure across the entire cut area to eliminate paper shift and drag. This model features a 17" cut length from front to back, large enough to cut posters and larger books.
- [Solid Steel Construction]: Solid steel construction ensures this cutter will last a long time, and you'll be able to tell the moment you pick it up. Rubber feet at each corner stop the cutter from sliding during use, and a removable handle allows for easier storage.
- [Hardened Steel Blade]: The hardened steel blade comes razor sharp, but is also easily replaceable as it wears down over time. Professional knife sharpening services can bring life to old blades, or you can purchase new ones separately from HFS.
- [Replacement Parts & Aftersales Service]: The replacements parts and operation instructions are available if needed.
Features:
Specs:
Height | 12 Inches |
Length | 30 Inches |
Number of items | 1 |
Size | A3-17'' paper cutter |
Weight | 44.0924524 Pounds |
Width | 21 Inches |
🎓 Reddit experts on stack paper trimmers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where stack paper trimmers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
We didn't print our invites, but we did print our STD's, programmes, menus and hen do invites.
This is the card we used, House of Card, 250gsm, pack of 100 for £5.99. In theory, if you're having A5 invites, this will give you 200... or 100 A5 invites and 100 A6 RSVPS and 100 A6 Info cards.
The card is a really lovely weight - a tiny bit floppy if using as full A4, but at A5 it feels great. Not flimsy at all. And worked a treat with our basic old £30 from Tesco inkjet printer. Has a really nice finish too.
Really, it's not that much of a faff. Buy extra card so you can practice - and invest in a good paper trimmer and you'll be golden. I originally bought a £10 one from Argos - it was rubbish and made my lines wonky. This works great!
If using thicker card (which you'll want to do for the weight), I recommend only feeding say 10-20 sheets into the printer at a time.
My husband treated me to a guillotine similar to this only larger, years ago when I got into paper hobbies. It works really really well! I don't use it for the books that I sell, as I deckle edge those, but I use it for all kinds of other projects. Just make sure you line things up properly and you'll be good to go :)
I've had mine for a few years (didn't buy it for my current project), but I think it was this one or something like this one:
https://www.amazon.com/gp/product/B01174H37K/
Mine is by no means a high quality cutter (it's a little off true), but with a little caution it works fast and easy. Just make sure you get one that's fairly large (the little ones intended for cutting four or five sheets at a time will not work. Any A4 or larger guillotine cutter should work with a little fiddling.
Based on the middling reviews on mine, you might be better off with this one: https://www.amazon.com/HFS-Heavy-Guillotine-Paper-Cutter/dp/B00NO7PYYI/
Once laminating you'll need a paper trimmer too. The $10 kind work fine (this is mine https://www.amazon.com/gp/product/B01MUB5MY5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 but there are a hundred like it)
Tip: get both regular and matte laminating pouches. The regular keeps your colors bright and text super clear, but if it's something that lays flat on the table, the glare will kill you! Plus the matte finish feels ridiculously cool.
The two most common devices for automatic cutting on the consumer market are the cricut and Silhoutte Cameo. It's fairly straight forward to just cut squares out of the box, but it might not save you any time over a paper guillotine.
Also, I'd recommend just getting spray glue and making a mask for the gluing part. Spray glue is the best.
Are you looking for a guillotine style cutter? I currently use this one. A friend and I bought it several years ago when we did a lot of bookbinding, to help cut stacks of paper. So far, haven’t had any issues with it. I will say that it’s pretty heavy, so not great if you need something that can be easily transported around.
Should be able to cut thru 400 sheets according to the manufacturer. Highest we ever needed to go was ~250.
It was this model I got to trim the edges of the books I make. Tabletop and hand levered, great for small at home projects.
I'm in the UK but I've got one similar to http://www.amazon.com/Amzdeal-Guillotine-Capacity-Commercial-Photocopy/dp/B00BQGK1FQ?ie=UTF8&keywords=A3%20Guillotine&qid=1464348535&ref_=sr_1_4&sr=8-4
I've used it to cut 3mm millboard with some success (it cuts cross grain beautifully but along the grain needs some packing underneath and careful clamping)
I had to adjust the clamp on mine after arrival as it was causing the stack of paper to shift when cutting and end up being undercut, it's a 5 min fix though.
Got an HFS Guillotine-style Paper Cutter for my gf - https://www.amazon.com/HFS-Heavy-Guillotine-Paper-Cutter/dp/B00NO7PYYI/
​
Handle swivels up and down, and it's strong, so you can cart this sucker around.
​
The arm pops right off and fits between the cutter and the handle when it swivels up.
​
Grid on the platform.
​
It's just a beaut.
Does it have to be electronic? Because that seems like overkill. I'd just pickup something like https://www.amazon.com/Westcott-ACM15106-Guillotine-Anti-Microbial-Protection/dp/B0058TW286 and be done. Or just order paper that's already cut in half.
I'm not willing to spend three times the game price for an add-on like this. But if I was this is what I'd get.
https://www.amazon.com/gp/aw/d/B001QYE6W2
Would maybe one of those large paper cutters work? Like this but wooden one
https://www.amazon.com/Westcott-ACM15106-Guillotine-Anti-Microbial-Protection/dp/B0058TW286/ref=mp_s_a_1_3/146-1323878-0991514?ie=UTF8&qid=1541203931&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=art+paper+cutter&dpPl=1&dpID=41acuiLT%2BYL&ref=plSrch
Here is the mobile version of your link
I bought one of these guys a little while back.
https://www.amazon.com/Yescom-Capacity-Cutting-Industrial-Guillotine/dp/B0024CW2N0
THEY ONLY HAVE TINY ONES
Guillotine model kit
Another guillotine model kit
Yet another guillotine model, not a kit
Nimm halt sowas
You didn't say so in the text, but I'm going to assume that you cut away the cover first and are just trying to remove the part that holds the pages bound together.
When bookbinders are putting those bindings in place, they also have to cut the pages square to make them line up. For this purpose, they use heavy-duty varieties of paper cutters, which cut the pages neatly and without mess.
Honestly, I'd recommend you visit a bookbinder, and just ask them to unbind those books for you; they have the tools and the skill. A circular saw cut (or any other saw cut, really) is never going to be clean unless maybe if you glued the pages together first, but that would defeat the purpose of what you're trying to accomplish.
This is the one I brought - my bad, I said eBay before but it was actually Amazon. I don't know why but there seem to be dozens of identical looking guillotines with different brand names at both A4 and A3 size. The US ones seem to be sold by HFS I may be wrong but my guess is they all come from the same factory in China and are simply rebranded.
I have to say I am very happy with mine. It is very solidly built (weighs about 60 pounds) but it takes up a lot of space - with hindsight, the smaller A4 model would have sufficed. However, it does the job really well. I don't want to belittle other peoples experiences, but I think that most of the problems that get highlighted in the reviews are caused by them not using it properly. The key is that the clamping bar that holds the book block in place for cutting needs to be really, really tight to stop movement which makes it look like it is cutting at an angle. After I'd worked that out I haven't had any problems. The blade is removable with care and you can sharpen it yourself.
However, unless you have lots of space in your workshop and you make lots of thick books that need trimming then if your local shop will continue to trim a book for $2.50, I'd stick with them.
>accantono l'idea romantica dell'artigiana crossover
Non puoi arrenderti così, dai...
Per il forex puoi usare una taglierina da carta un po' seria. Se invece, come per me, ogni scusa è buona per comprare giocattoli nuovi, questo è un gran bel aggeggino.
Hah, ok...I'll get a few more up before Christmas at least!
Ordered one of these bad boys just to keep this up for you all: http://www.amazon.com/HFS-Heavy-Guillotine-Paper-Cutter/dp/B00NO7PYYI
Wrong tool for the job
Look for a Guillotine Paper Ream Cutter
https://www.amazon.com/HFS-Blade-Heavy-Guillotine-Cutter/dp/B00MWB1C2A
Find out how many pages you need to cut through, and choose the proper cutter. Once you get to 500page + the price of a cutter rises exponentially.
https://officeequipmentmachineshop.com/products/ERC-Trio-EX-3942-Manual-Stack-Paper-Cutter-Replacement-Clamping-Mechanism?gclid=Cj0KCQjwvdXpBRCoARIsAMJSKqL11uEUqNeAeLtVtzPmOGJ3Qgg8FuEt77igSHGr05njVj9AZ5N_lU0aAkfSEALw_wcB
https://www.amazon.com/Guillotine-Cutter-Desktop-9770EZ-Cutting/dp/B071WF854L