Reddit mentions: The best swimming pool test strips
We found 8 Reddit comments discussing the best swimming pool test strips. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Poolmaster 22211 Smart Test 4-Way Swimming Pool and Spa Water Chemistry Test Strips, 50 count (Pack of 1)
- BEWARE: We want you to receive quality, authentic product so please carefully note the seller you are buying from and the spelling of Amazon to avoid receiving a bad copy of this product
- For maintaining healthy water chemistry in swimming pool or spa; contains 50 strips in easy-to-store container
- Pool water tester analyzes four chemical factors; free chlorine, bromine, alkalinity and pH
- Dip in pool or spa water for instant reading; no-bleed pads give accurate color reading
- Made in the USA
Features:
Specs:
Color | White and yellow |
Height | 3.5 Inches |
Length | 1.5 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 1 Pounds |
Width | 2 Inches |
2. Hot Spring Freshwater Portable Spa Test Strips
- 【Simple】Very easy to install, make your home look more classy
- 【Strong】Made of eco-friendly premium PA66 material, clips with strong 3M VHB black tape
- 【Quantity】clips 40pcs with VHB tape 45pcs
- 【Durable】Worked great for cable management,fixed your various wires, network cable, TV-coax cable, USB cords, Cell phone chargers ect.
- 【Suitable】Use a wide range, such as home, office, and many other places you wish to keep the cables organized.
Features:
Specs:
Color | SMALL |
3. Pro Water Hardness Test Kit - Quick and Easy Hard Water Test Strips for Water Softener Dishwasher Well Spa and Pool Water | 50 Tester Strips at 0-425 ppm | Calcium and Magnesium Total Hardness
✅ EASY TO READ COLOR CHART - From red to green, the large color chart makes distinguishing your test results effortless. The total hardness is measured in both 0-25 GPG and 0-425 PPM, making it a perfect tool to calibrate your water softener or simply check the water hardness.✅ QUICK AND ACCURAT...
Specs:
Height | 4.13385 Inches |
Length | 1.65354 Inches |
Size | 1-pack |
Weight | 0.13 Pounds |
Width | 1.65354 Inches |
4. LaMotte 4250-BJ Chlorine Test Strips, Sanitizer Strength
- Product type: Test strip
- Range: 10, 50, 100, and 200 ppm
- Model: 4250-bj
- Strips and color chart come supplied in a waterproof plastic vial
Features:
Specs:
Color | Multicolor |
Height | 3.9 Inches |
Length | 0.4 Inches |
Number of items | 1 |
Weight | 0.01 Pounds |
Width | 0.5 Inches |
5. 14-in-1 Drinking Water Test Kit by Baldwin Meadows - Water Quality Test for Well Water and Tap Water - IMPROVED SENSITIVITY detects low level ranges for Lead, Fluoride, Iron, Copper & Mercury + MORE!
14 PARAMETERS in 1 STRIP: Water testing for Total Alkalinity, pH, Total Hardness, Iron, Copper, Lead, Fluoride, Mercury, Nitrate, Nitrite, Chromium, Bromine, Chlorine & SulfateEASY & INSTANT: Simply dip the strip in water to test water quality. Results are determined in seconds. Easy to read Color C...
🎓 Reddit experts on swimming pool test strips
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where swimming pool test strips are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Tbh at my pool at the Y we run our chlorine mostly between 3-5. As said previously, higher bather load (more swimmers) usually means 5-10ppm. They meant chlorine at 1.5, a 1.5 pH would be absolutely incredible and dangerous. I consider 1.5 to be low, but we would not close our pool over it, just add more. 1 is closing.
You can get one of these testers at any pool store or Walmart for pretty cheap peace of mind. They have instructions inside that are very easy to follow. I'd be slightly offended if you tested my pool, but I also check the chemicals hourly and I'd know what they are if you asked me, so I doubt your lifeguards will say anything. Clearly they don't keep good records. You should complain about that. Not trying to make you paranoid, but the ones who don't check chemicals are not necessarily the best lifeguards either.
If it's cloudy, good call not to swim. If it smells strongly or makes your eyes water from deck, don't swim. I'll add that if you do get a tester and the pH is not between 7.2-7.8, then don't swim.
Can I ask what the hours of your pool are? IMO 3 times a day is not enough if it's open relatively 24/7.
Edit: You can totally buy strips. Never used them before, but they are also probably at any pool store or walmart. I would probably be amused if you did this at my pool. It's probably a lot subtler than the dropper-testers.
Edit 2: I feel like I should add that I would let you test my pool if you wanted to, even if it would hurt my feelings. I feel like up top there I insinuated that it wouldn't be okay, but it would be fine. I have nothing to hide.
It is way easier than you are making it out to be honestly. We bought one about 3 yrs ago and I was in your spot and I seriously got it dialed in really fast. This is what I use to test water every couple days:
https://www.amazon.com/Hot-Spring-Freshwater-Portable-Strips/dp/B00ASYBBWO
I would say here is great place to get questions answered honestly but there is also some forums too. Don't let chemicals scare you it is really easy to do you will see and will look back and say why did I even worry about it :)
I would be more concerned about making sure its cleaned out. There is this cleaner you can get that will clear out the jets and remove grime from the piping. https://www.amazon.com/Ahh-Some-Cleaner-Clearer-Efficiently-Clarifier/dp/B0030MYGXW/ref=sr_1_2_sspa?crid=1E6AKXTRWDK91&keywords=hot+tub+cleaner+for+the+jets+and+the+tubes&qid=1568212796&s=gateway&sprefix=hot+tub+cleaner%2Caps%2C176&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFMUlA2OVlOUjRVR1AmZW5jcnlwdGVkSWQ9QTA2NjI0NzExTU1INjZBVjJFMUw0JmVuY3J5cHRlZEFkSWQ9QTAzNjQ1MTIxWDJRQkxaVjI5QkM5JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ== . I moved into my place 2 years ago and it came with a hot tub from the 90's. After using the cleaner, there was a ton of nasty buildup in the pipes. Once that's done, drain it and give it a good scrub down. Then change the filter.
Download the manual for your hot tub and read it to make sure you are performing proper weekly maintenance and using the correct chemicals. For example, some tubs take bromine tablets, some don't. There may also be some other cool features that you might not know about.
Get some hot tub test strips https://www.amazon.com/Poolmaster-22211-Swimming-Chemistry-Strips/dp/B001E6E9PG/ref=sr_1_3?keywords=hot+tub+test+strips&qid=1568212610&s=gateway&sr=8-3
Use them once or twice a week depending on hot tub usage. Then add any chemicals as needed. Make sure you fill up your hot tub once a week at least to make sure your jets are covered.
I'm all about confirming an issue before trying to resolve it - so you might use a testing kit to check the hardness of your water. Might be overkill - or might be enough to make you feel good about installing a water softener. I saw someone else mentioned the water heater might be full of sediment. I believe you're supposed to drain the water heater every year to help, but those things will build up over time no matter what. A test kit might also let you check your normal cold water - as well as your hard water to see if build-up really is a problem. Good Luck!
Not as good as soaking in water with just a tiny bit of bleach. You'd be amazed how little bleach it takes. For a home sink, probably somewhere between and eighth and a quarter cap of bleach, then filled with water. Let the plate soak for 30-60 seconds, and you're done.
Most cities require a 3-compartment sink for wash, rinse, sanitize for their restaurants. I've seen people ignore the sanitize part of the job, which makes no sense. When you're in a commercial setting, it takes such a small amount of extra time to set it up. Many kitchens use alternative sanitizers (including ammonia-based quaternary products), but if you want to try bleach on your own, you can get paper test strips. Again, you'd be quite surprised just how little bleach it takes to be effective.
If you really want to find out, you can get a simple water test kit that will show you the amounts of chlorine and copper in your water (along with other stuff like lead, mercury, etc).
Maybe someone should buy MIL some of these as a late Mother's Day present.