Reddit mentions: The best threding dies
We found 13 Reddit comments discussing the best threding dies. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Fiskars Hand Drill (85116984)
- Ideal for drilling holes in wood, plastic, paper, sheet metal, acrylic, mixed media and more for craft projects
- Ideal for drilling holes in wood, plastic, paper, sheet metal, acrylic, mixed media and more for craft projects
- Enclosed gears ensure smooth operation and consistent drilling pressure
- Contoured body provides a comfortable grip
- Accommodates standard drill bits (not included)
Features:
Specs:
Color | Black |
Height | 9.75 Inches |
Length | 3.39 Inches |
Number of items | 1 |
Size | Black |
Weight | 0.48 Pounds |
Width | 5.38 Inches |
2. M35 x 1.5 Metric Right hand Thread Die
- M35 x 1.5 metric right hand thread die
- The outside diameter is 65mm
Features:
3. 7mm X .5 Round Adjustable Die 1" Outside Diameter - High Speed Steel
Thread Diameter: 7mmMM Pitch: .5Outside Diameter: 1"
Specs:
Weight | 0.1 Pounds |
4. M14 x 1.0 Metric Left Hand Thread Die
- M14 x 1.0 metric left hand thread die
- The round die The outside diameter is 38mm
Features:
5. Drill America 3/8"-32 X 1" OD High Speed Steel Round Adjustable Die, DWT Series
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistanceRight-hand cut tools have a cutting action that engages when they are run in a clockwise directionRound die is chamfered on both facesAdjustment is obtained by a...
Specs:
Number of items | 1 |
Size | 3/8"-32 |
6. M6 x 1.0 Metric Left Hand Thread Die
- New 6mm X 1 Metric Left Hand Thread Die M6 X 1.0mm Pitch
- Outer diameter: 20mm
Features:
7. M35 x 1.0 Metric Right hand Thread Die 35mm
- Metric M35 x 1.0mm carbon steel right hand thread Die
- Pitch: 1.0mm
- Outside diameter is 65mm
Features:
8. Lee Precision 90179 .223 Remington Quick Trim Die,SILVER
Product Type: Sporting GoodsItem Package Dimensions: 11.684 L X 4.572 W X 4.318 H (Cm)Country Of Origin: United StatesItem Package Weight: 0.158 kgs
Specs:
Color | SILVER |
Height | 2 Inches |
Length | 5 Inches |
Number of items | 2 |
Size | 223 REM |
Weight | 0.33 Pounds |
Width | 2 Inches |
9. Century Drill & Tool 96210 High Carbon Steel Fractional Hexagon Die, 1/2-20 NF
- 1" Across Flats
- Heat treated and tempered high-carbon steel die.
- Precision cut threads for accurate threading.
Features:
Specs:
Color | steel |
Height | 0.25 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 1/2-20 NF |
Weight | 0.06 Pounds |
Width | 1 Inches |
🎓 Reddit experts on threding dies
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where threding dies are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
For any potential glory hole enthusiasts out there reading this who want to take it to the next step, that is called a hole saw and can be found at your local hardware store. You can also buy a compact hand drill to attach it to.
You could thread it yourself easily, Amazon sells -14mm dies
I guess this will have to do
You can always modify it
http://www.amazon.com/gp/aw/d/B0007CNIS2/ref=redir_mdp_mobile?m=A1E8TEI9CXEX51&qid=1249344328&ref_=sr_1_1&s=hi&sr=1-1&tag=e04ed-20
That's for 510 atomizer connections to the battery.
Here it is on Amazon. Try searching "thread die" for other shops. CCW are also referred to as "left hand" threads
http://www.amazon.com/Metric-Right-Thread-1-5mm-Pitch/dp/B008606XLG
Do you have the pipe?
And if [this] (https://www.reddit.com/r/AskNYC/comments/41b4mm/need_to_thread_a_35mm_pipe_m35_x_15/) isn't you, maybe you should PM them and ask what they did.
CAD Files: sendspace.com/file/l54t69
Edit: the .f3d file is a fusion360 file. Also I recommend that the part be printed sideways so its "laying down" This way the screw threads are perpendicular to the print layers and wont shear.
I have it fitting a 14.5 mm head diameter (~0.55 in, metric is just easier to work with with small things). Tho feel free to ask for adjustments to have it fit a flashlight you have.
​
I used these to finish up the screw threads. Theyre not necessary and you can make it work with screwing in the appropriate screws/holes but they interface much smoother.
10-32 Tap amazon.com/IRWIN-1031ZR-Tap-10-32Nf-Taper/dp/B000GTQTI2/
3/8-32 Die amazon.com/dp/B00CTS4NJK/
Why not make your own? Get a stock rod of the correct size and temper, and thread each end.
You can get an M35x1 metric die on amazon for $48
But if you need pipe threads that may be an issue. Did you purchase a 35mm pipe or is this something that was installed or laying around. Unless you specifically bought a 35mm pipe I find it hard to believe this isn’t some standard size. OD on a 1” pipe is 1.315”; 35mm is 1.378”
If it’s a 1” pipe lots of places will be able to thread it. They have the machines at Home Depot but idk if they will do it on any pipe you bring in.
It won't include a case gauge, really a complete round gauge. You should own one for every caliber you reload. Example: https://www.amazon.com/Lyman-Reloading-Length-Headspace-Gauge/dp/B001RI7A66/ref=sr_1_1?ie=UTF8&qid=1479962029&sr=8-1&keywords=lyman+223+gauge
Wilson and Dillon also make cartridge gauges. You can use them to confirm your cases are within spec (both shape/shoulder and length) and check loaded rounds. Always gauge at least your first few rounds each session and randomly pick a few as you go.
Note that for the Lee kit to trim brass you need Quick Trim Dies. Example: https://www.amazon.com/Lee-Precision-223-Remington-Quick/dp/B00NEQW1T0/ref=sr_1_1?ie=UTF8&qid=1479962154&sr=8-1&keywords=lee+223+trim+die
The first time I got the same kit I screwed up and bought what I thought was the necessary components for trimming. It turns out it was a shell holder and spindle piece for a different type of trimmer.
You should really get a deburr/chamfer tool for brass. The thing that comes with the Lee kit is completely worthless. Lyman makes a good one: https://www.amazon.com/Lyman-Case-Prep-Multi-Tool/dp/B004MCMCYE/ref=sr_1_1?ie=UTF8&qid=1479962275&sr=8-1&keywords=lyman+case+prep+tool
Personally I hate balance scales. This is a good electronic replacement. You'll want to use the powder pan that comes with the Lee scale on it or buy another (large!) pan. https://www.amazon.com/Smart-Weigh-GEM20-Precision-Milligram/dp/B00ESHDGOI/ref=sr_1_2?ie=UTF8&qid=1479962410&sr=8-2&keywords=gemini+scale
Important: Note this scale has a large area for you to rest a pan on. There is another version of this that comes with a little pan. The pan is WAY too small for loading anything past 15 grains or so of most powders. The 'contact area' for the scale is also tiny, so to use another pan you have to stack it. The one I linked has a large contact surface you can put a good-sized scale on.
They're worth far more. Out of curiosity, where'd you pick yours up?
You'll be able to see a spot of slight discoloration where a weld covers the set screw that holds on the fake can. Stick it in a vise, and use a dremel grinding wheel to shave away the weld until you get to the allen head screw, which should come right out. Then, you just have to unscrew the fake can, which required some vise grips in my case.
Wear a full face shield! I had a grinding wheel explode on me, and it left a good sized dent in the shield right where the bridge of my nose would've been.
If you want to use the 1/2x20 tpi threads, clean them up with a die like this one and then get a thread adapter.
Triple K makes kinda ugly repro mags, that do work.
Small to none. You would have better luck at a local machine gun. Harbor Freight might have one, since they import everything from China, but a for warning they suck. They are cheap on Amazon and Ebay.