Reddit mentions: The best trailer lighting
We found 11 Reddit comments discussing the best trailer lighting. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. [Pack of 10] TMH 3.8 Inch White LED 6 Diodes Reverse Backup Side Marker Fender Light Extra Bright 2835 SMD Shockproof for Pickup Truck Tractor RV Trailer Camper Van Boat 12V DC Low Consumption TK12 …
- Brand : TMH
- 10 pcs 12v DC Side Marker Light indicator light 3.8'' x 0.8'' x 0.4" White Light & White Lens
- Brightness : 120 lumen each light with 6 pcs High Quality SMD LED 50,000hrs Life Time
- PC lens + Waterproof + Shock Proof + Dust Proof , UL Listed Power Wire
- Easy to install with FREE screw set included & Foam tape base
Features:
Specs:
Color | White |
Number of items | 100 |
Size | 3.8” x 0.8” x 0.4” (L x W x H) |
2. 3/4" Clearance & Side Marker Lights w/.180 Bullets (2 Pack) (Amber)
Compact single diode design fits ¾" holeRequires “top-mount” positioning to meet DOT requirements for PC ratingFunctions as both clearance and side marker light when mounted at a 45° angleHardwired 8” leads with .180 bulletsIncludes mounting grommet
Specs:
Color | Amber |
Size | 3/4" |
3. Blazer International Trailer & Towing Accessories V540 756-090 Trailer Light Kit, Pack of 1, Red
- Includes (2) stop/tail/turn lights, (2) side markers, 20' wire harness with 4-flat connector, rustproof license plate bracket and mounting hardware
- Works with 12V systems
- Stud mounts on industry standard 2" centers
- ABS plastic housing and durable acrylic lens provide protection against corrosion
- Requires bulb #168 and #1157 for replacement
Features:
Specs:
Color | Red |
Height | 4.7 Inches |
Length | 11.8 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 3 Pounds |
Width | 8.8 Inches |
4. WennoW 4 Way Flat & 7 Way Round Trailer Wiring Tester Light Brake Tail Turn Signal
- Fashionable sporty design, perfect for all kind of sports, indoor and outdoor activities or daily use -the watch has a calendar function: date, luminous hand, 24 hour display, indiglo light
- High quality 21 cm length and 19 mm width black leather strap with a buckle
- Case diameter: 43 mm, case thickness: 12 mm, case colour: silver and dial colour: black
- Water resistant: 10 bars -weight: 77 g
- The watch is delivered in an original gift box and has a warranty of 2 years
Features:
5. Bully NV-5164 Wireless Trailer Red LED Light Kit with Magnetic Base for RV, Campers, Boats, Farming Equipment, Long Trailers, and Tow Trucks - Requires 12AA Battery
- Tow Trailer Lights: these lights are designed to boost road safety. By making the vehicle clearly visible to other drivers in poor lighting or foggy weather, the towing lights can prevent potentially fatal accidents
- Special Features: these tow trailer lights have a magnetic base that helps the light to easily stick to most metal surfaces. These lights cover basic vehicle lighting functions such as turning left or right and braking
- Easy Installation: the magnetic trailer towing lights are equipped with an antenna that ensures a quick set up. Transmitter of the wireless towing lights allows easy connection with a flat 4 or round 7 connector
- Applications: such trailer tow hitch lights are typically used for RVs and campers, apart from boat trailers, and for tow truck safety lighting. These lights conform to DOT and SAE standards, making them compliant in most regions
- Specifications: wireless tow LED lights are equipped with an antenna with 100 ft. reach. The wireless connection allows more freedom in placing the lights that work with 12AA batteries
Features:
Specs:
Color | Red |
Height | 13 Inches |
Length | 6 Inches |
Number of items | 1 |
Release date | August 2014 |
Weight | 2.6 Pounds |
Width | 16.5 Inches |
6. Blazer C125 5-7/8" Round Par36 6V Work Light with Trapezoid Beam
- 5-7/8" round Par36 work light with trapezoid beam
- Works with 6V systems
- Single stud mount installation
- Built with shockproof rubber housing
- Requires bulb #4411-1 for replacement
Features:
Specs:
Release date | June 2014 |
Size | Single |
7. 4pc 6" Amber Oval LED Trailer Tail Light Kit [DOT FMVSS 108] [SAE I6] [Grommet & Plug Included] [IP67 Waterproof] [Park & Turn Signal] Marine Trailer Lights for Boat Trailer RV Trucks
PERFECT FIT - SAE & DOT FMVSS-108 certified standard 6" size makes it easy to upgrade the dim, burnt-out, or damaged lights on your tractor, trailer, or work truck.READY FOR THE WEATHER - With a sonically sealed, submersible, IP67 waterproof rating, our lights are better suited to deal with the elem...
Specs:
Color | Amber |
Height | 5.87 Inches |
Length | 6.75 Inches |
Number of items | 4 |
Size | 4 Pack |
Weight | 2.27 Pounds |
Width | 6.75 Inches |
🎓 Reddit experts on trailer lighting
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where trailer lighting are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
5050 is the SMD package size of the LED, 5mm x 5mm. That's the common one on RGB LED tape, but the white ones are probably smaller. Anything on amazon that says it's 12v ready should work, it has the resistors built in, just choose your color temperature and LED count per foot. I'd recommend warm white and a mediumish count, sorta every other or every third spacing.
​
Here are a few, I haven't used any so can't recommend any.
On this one, you can see the little scissors line, most LED tape has that so you can buy long lengths and wire up custom sizes for whatever you want. https://www.amazon.com/Alpena-77443-FlexLEDs-8-Inch-White/dp/B00D1SWLGO
​
Something like this might be better if you can screw it into something. I've seen the tape style get hot and fall off. With really good surface prep that probably won't be a problem. https://www.amazon.com/White-Marker-Truck-Trailer-Light/dp/B01GKOQVZC
​
More dense LED count. https://www.amazon.com/AMBOTHER-Atmosphere-Underdash-Waterproof-Decoration/dp/B01N0ZC0S7
​
These look like RGB leds, so maybe they're mixing colors to get amber? Or maybe they're RGBW and the white is amber? https://www.amazon.com/Ecosin-motorcycle-signal-Universal-lights/dp/B01K6YU7ES
​
​
ALso check out www.superbrightleds.com
Do yourself a favor and go to autozone or where ever and look at the trailer lights section and pick up 2 lights like this. Mine were $4.99 each at the store. Use a 3/4 inch bit and drill out a hole in the support and install. It will take you 10 minutes to do both sides and it looks really, really clean.
Thanks for the complement. I have a poison spider louvered hood on its way and will go in on Saturday along with weathered "WARDAWG" decals (that was my unit call sign).
I am excited to see it start to come together!
It's pretty easy to get a trailer to be road legal, I've built a few myself. It's a simple application process. As for wiring it, that's easy, too. You can buy a trailer lighting kit for less than $20
Ohhh, the Darlington arrays look awesome. These are the Led's I'm trying to drive: https://www.amazon.com/dp/B01GKOQVZC/
I bought something similar like this from Amazon and it comes in very handy, a local auto parts store may have them as well.
www.amazon.com/dp/B073R7HZNX/ref=cm_sw_r_cp_tai_7fkqDbF6AFEHJ
https://www.amazon.com/Bully-NV-5164-Wireless-Trailer-Towing/dp/B00G9SB45M
I'd just give it a go since it's broken anyway plus the 12volt version you need if you break anything is only ~10$ US
https://www.amazon.com/Blazer-C125-Utility-Tractor-Trapezoid/dp/B00LCVZI80
https://www.amazon.com/dp/B01N8OOZS1/ref=cm_sw_r_cp_apa_i_Dl.wDbYZFPHMP
Something like this. Tie them into my fog lights since they aren't part of the lamp monitoring system on the 3rd gens. Also thought about the LED light strips you get at parts stores, but decided against them. They don't seem very durable and they are needlessly expensive for what you get.
You can also buy the lights in a 1" diameter as well. And if you think LEDs would be too bright you can also get the lights with a standard 194 bulb.
I don't have to worry about mounting as I have a bug guard, the small short one. Which would hide the mounting.
I did this a couple years ago and was going to mount some lights. But my give a fuck wore out and I never got around to doing it. Also, I realized that I would either have to run a shit load of wire or some sort of quick disconnect since my grille is attached to the hood.
https://imgur.com/gallery/LxsMH