(Part 2) Reddit mentions: The best tv mounts

99% of what we watch now is fed via a Roku 2 XS that is mounted to the back of the TV. The upper ethernet is what feeds the Roku. The remote it comes with is Bluetooth, but it also supports RF and IR. Last night I was playing with a Harmony universal remote, and I didn't have any problems with the Roku picking up the Harmony's IR signals, even when stuck behind the TV.

More to your question, the HDMI feed to another room was originally so that I could locate my Xbox in a closet, but I'm not 100% if latency to screen is going to be an issue. The Xbox controllers are RF, so IR is not a problem there. Here is what I installed, I could always replace it with This one if I needed IR to work.

Do something similar to TV safety straps.

How far away are the speakers from the wall? Screw an eye hook to the wall and another to the back of the speaker and connect them with picture hanging wire. Might want to do two for each speaker, one high and a lower one to keep the bottom from swinging out if the top swings on the wire.

Similar to but longer than HOW TO INSTALL SAFETY STRAPS.

Or floor bases.

https://foter.com/floor-speaker-stands

http://soundanchors.com/products/2085/floor-bases

http://www.soundocity.com/Oregondv/Floor_Standing_Speaker_Stands_Plinths.htm

DIY

https://pinkfishmedia.net/forum/threads/home-made-floor-standing-speaker-plinths.133965/

https://www.dropbox.com/sh/h442y9nu8cdodf7/AABUY1lvO1PLCQTCyxsf28tta#/

Outriggers:

http://www.loudspeakerstands.net/

https://nsmt-loudspeakers.com/content/speaker-outriggers

https://soundocity.com/product-category/outriggers/

​

​

Dunno how I feel about this. I really want to like it. Look at the reviews on their other products, though.

It all seems normal until you go to actually read them, and they all have "Five Stars" (with that exact capitalization) as the title. And all of their products on Amazon are similar. Obviously they bought some good reviews.

Unfortunately monitor mounts tend to be really hit or miss, at least for the cheap ones. I can recommend an Ergotron without hesitation, but they are expensive AF. I've also sold a fair number of Amer mounts and haven't heard any complaints, but mostly they've been standard desk mount units, so I don't know how well something like this or this would stand up, but it should probably be at least functional, if not as good as the Ergotron.

I'm back to answer your specific question of whether a smaller monitor would help.

The problem isn't your monitor, it's the monitor's base, so you could get a new monitor and mount it off the desk to have more desk space. The new monitor could be any size, even larger, and you can probably find one that's thinner.

There are a lot of ways to mount it. To totally clear your desk, you could mount it on the wall, or a desk clamp would leave you with a minimal base on the desk:

https://smile.amazon.com/Monitor-Bracket-Adjustable-Swivel-Monitors/dp/B07KT13216/

https://smile.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V101C/dp/B071FX6H53/

There are a lot of 22" 1080p monitors. Many don't have a VESA mount and it looks like you'll need a VGA port (?), so check their specs carefully before buying one:

https://smile.amazon.com/HP-23-8-inch-Adjustment-Speakers-VH240a/dp/B072M34RQC/

This is the one I want. Great build and looks.
http://www.amazon.com/Atdec-VF-AT-D-Focus-Articulated-Double/dp/B001M4HF3S/ref=sr_1_7?ie=UTF8&qid=1412783932&sr=8-7&keywords=ATDEC

Only with a monitor arm. I got this one and it works great:
https://www.amazon.com/dp/B0082D56MO/ref=cm_sw_r_cp_apa_BhZmyb6T76N60

Not op but probably something like this

Would this case work with AIO coolers like the Corsair H100i and a Hybrid GTX 980Ti?

I'm moving to another home with my wife and currently our set up is a 6 foot table with our accessories (Monitor,KB&M, Speakers, headphones) and then to the right is a dresser where both our towers are on.

Our towers are S340's and the room we are getting is about 2 feet smaller so I was thinking of probably installing some shelve's above our monitors and putting the desktops there OR using one of these which is what I'm currently using on my PC at work.

So is there any other case that's wall mountable?

Get a monitor/tv wall mount, something like this https://www.amazon.com/dp/B01M99FFSP/ref=cm_sw_r_cp_api_i_SjqwDb8JAMVJC

I use this with my 65" Sony. It is pricey bot suberb qualty. If you can mount this to your horisontal stud, you should be fine. (Had it before with my Pana 50" plasma and 55" Sony.)

https://www.amazon.com/Vogels-Wall-Mount-180°-Swivel/dp/B00EO14K8Y/ref=pd_sbs_23_2/147-5424100-7874227?_encoding=UTF8&pd_rd_i=B00EO14K8Y&pd_rd_r=0e71dd3c-5b82-11e9-8963-117ccf44e055&pd_rd_w=4i4dH&pd_rd_wg=JuFJ8&pf_rd_p=588939de-d3f8-42f1-a3d8-d556eae5797d&pf_rd_r=1JBG9K891WD0TBRA8GXW&psc=1&refRID=1JBG9K891WD0TBRA8GXW

https://www.amazon.com/dp/B07BHJDVSV?ref=ppx_pop_mob_ap_share

That’s the mount the laptop sits on but the actual arms are

https://www.amazon.com/dp/B078K23CFF/ref=cm_sw_r_sms_c_api_i_bvlTDb8HAAMTH

I’ve had the arms for awhile and they’re showing some wear unsure if I’d recommend them for 24’.

https://www.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V101C/dp/B071FX6H53/ref=mp_s_a_1_13?adgrpid=57683608482&gclid=CjwKCAjwibzsBRAMEiwA1pHZrktKXdbFrV1-umz81NOLUwis8kwQlicZNpM1jUFyNYpAbn7DjAFdexoCIoEQAvD_BwE&hvadid=274680598476&hvdev=m&hvlocphy=9010816&hvnetw=g&hvpos=1t1&hvqmt=b&hvrand=6358499489284961128&hvtargid=kwd-296515071054&hydadcr=19226_9665589&keywords=desktop+monitor+mount&qid=1569673167&sr=8-13 I bet you could use something like this. You might have to cut a small slot in the desk but this should work.

Mount it using an arm mount like THIS. Then you can reposition as needed, and you can put it at odd angles too.

for the LG Ultrawide I am using this the the other two 27 inch monitors I used these

https://www.amazon.com/Wall-Mount-Personnel-Computers-Universal/dp/B000G1C7A4

This are the 3 i had in mind.

https://www.amazon.com/AmazonBasics-Notebook-Arm-Mount-Tray/dp/B010QZD6I6/ref=sr_1_4?crid=16HD9Q3HQLM5V&keywords=laptop+tray+for+monitor+arm&qid=1569384589&s=gateway&sprefix=laptop+tray+%2Caps%2C226&sr=8-4

https://www.amazon.com/WALI-Notebook-Compatible-Capacity-MLP01/dp/B07BHJDVSV/ref=sr_1_11?crid=16HD9Q3HQLM5V&keywords=laptop+tray+for+monitor+arm&qid=1569384885&s=gateway&sprefix=laptop+tray+%2Caps%2C226&sr=8-11

https://www.amazon.com/HumanCentric-Laptop-Monitor-Notebook-Secures/dp/B07RJZJVHF/ref=sr_1_3?crid=16HD9Q3HQLM5V&keywords=laptop+tray+for+monitor+arm&qid=1569384885&s=gateway&sprefix=laptop+tray+%2Caps%2C226&sr=8-3

Mine are not VESA either. I purchased adapters.

https://www.amazon.com/Mount-Plus-MP-XMA-01A-Monitor-Non-VESA/dp/B074CTHBDJ/ref=sr_1_fkmrnull_1?keywords=Mount+Plus+MP-XMA-01A+Non+VESA+Monitor+Mount+Adapter+Bracket+Kit+for+Non-VESA+17%22+to+27%22+LED%2FLCD+Screens+Up+to+17.6+lbs&qid=1556159941&s=gateway&sr=8-1-fkmrnull

Mount Plus MP-XMA-01A Non VESA Monitor Mount Adapter Bracket Kit for Non-VESA 17" to 27" LED/LCD Screens Up to 17.6 lbs

Use VESA adapter.
https://www.amazon.com/HUANUO-Universal-Bracket-Mount-Adapter/dp/B079BF5X7C/
https://www.amazon.com/VIVO-Adapter-Monitor-mounting-Stand-VAD1/dp/B00RTS5WWM/
https://www.amazon.com/Non-VESA-Standard-Mounting-Brackets-003-0023/dp/B00QVRTUQ6/
https://www.amazon.com/Mount-Plus-MP-XMA-01A-Monitor-Non-VESA/dp/B074CTHBDJ/

There are various types of non-vesa mount adaptors available. Samsung also have non-vesa mount adaptors for various non-vesa monitors they've released in the past.

Could this be adapted?:

https://www.amazon.com/VIVO-Folding-Mounting-Monitors-MOUNT-M-FD37B/dp/B071KG6HT2

Newstar and Ergotron are quality brands. I'd go with this one

[MX Wall Mount LCD Arm by Ergotron] (http://www.amazon.com/MX-Wall-Mount-LCD-Arm/dp/B0028407WW/ref=pd_sim_pc_8?ie=UTF8&refRID=0YZT4202QHNZ7T2QZA3V).

https://www.amazon.com/MX-Wall-Mount-LCD-Arm/dp/B0028407WW/ref=sr_1_2?ie=UTF8&qid=1474318882&sr=8-2&keywords=ergotron+mx

Maybe try this https://www.amazon.com/Furniture-Anti-Tip-Mounting-Hardware-Included/dp/B0153XNDL6/ref=sr_1_3?keywords=tv+anchor&qid=1554599723&s=gateway&sr=8-3

Here’s a link for tv straps that just hook to the back of the tv stand.
https://www.amazon.com/dp/B0153XNDL6/ref=cm_sw_r_cp_api_kMcMAbB0ZRKQ4

https://www.amazon.com/gp/product/B002N8A16U/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

i got a few of these,also they tend to have all the hardware needed to install.

Exactly. I've got 2 roku mounts taking up glue-free real estate behind my TVs.

http://www.amazon.com/TotalMount-ROKU-Mounting-System-Compatible/dp/B008B1125W

What about something like this? You could put it on the ground in front of you and adjust it to whatever height you like.

Edit: my bad, this will not hold your size monitor, sorry about that.

Edit2: turns out it's a lot more expensive for one that holds 34". Not sure what your budget is, but this might be an option.

Single Desktop Tilt Floor Stand Mount for 13" - 34" Screens https://www.amazon.com/dp/B009V0CG98/ref=cm_sw_r_cp_apa_7VVMBbEEM734K

You mean the TotalMount?

I have one and it works fine, but it blocks access to the Roku's USB port (which I use for movies). If you don't use that port, the TotalMount does exactly what it's supposed to and keeps the Roku out of the way.