Reddit mentions: The best welding helmets
We found 178 Reddit comments discussing the best welding helmets. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 72 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Headgear, for Helmet Headgear
- For use with: Helmet headgear
- Standards: ANSI/CSA
- Weight: 0.35 pounds
Features:
Specs:
Color | Original version |
Height | 4 Inches |
Length | 8 Inches |
Number of items | 1 |
Release date | December 2017 |
Size | One Size |
Weight | 0.3086471668 Pounds |
Width | 8 Inches |
2. ArcOne T240-10 Tradesman Horizontal Auto-Darkening Filter for Welding Helmets, 2 x 4.25 x 0.2"
- Light state 3, Dark state 10.5
- Two independent sensors
- Economical, general use filter
- Dimensions 2-Inch x 4-1/4-Inch x .2-Inch
- Viewing Area 5.25-Inch
Features:
Specs:
Height | 0.2 Inches |
Length | 8.5 Inches |
Number of items | 1 |
Size | 2 x 4.25 x 0.2" |
Weight | 0.3 Pounds |
Width | 5.7 Inches |
3. Jackson Safety Replacement 370 Headgear for Various Jackson Safety Welding Helmets, Adjustable, Black/Grey, 20696
Compatible: The Premium 370 Replacement Headgear with adjustable ratchet suspension is compatible with a wide variety of Jackson Safety top welding helmets including: Halo X, HSL, Nitro, WH40, SmarTIGer and WH70 series (sold separately)Design: Designed for maximum comfort, the headgear is built with...
Specs:
Color | Original Version |
Height | 9 Inches |
Length | 8.5 Inches |
Number of items | 1 |
Size | Jackson Safety 370 Replacement Headgear (20696), Adjustable Jackson Welding Helmet Parts, Black and Gray |
Weight | 0.3 Pounds |
Width | 2.25 Inches |
4. Fibre-Metal Pipeliner Fiberglass Welding Helmet with Rubber Headband (110PWE), White
RUGGED SUPERGLAS PLUS: Tough but lightweight SuperGlas Plus material is impervious to moisture and impact-resistant to prevent cracks and chips; smooth surface is self-extinguishing to deflect sparksCOMPACT DESIGN: Specifically designed as a pipe welding helmet, the compact design allows access to s...
Specs:
Color | White |
Height | 9 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | 1-(Pack) |
Weight | 2 Pounds |
Width | 10 Inches |
5. Fibre-Metal by Honeywell Tigerhood Classic Thermoplastic Welding Helmet with Speedy Loop Hard Hat Mount, Gray (5906GY)
- Shell Material: Thermoplastic
- Product Type: Helmet Assembly
- This product is manufactured in Mexico
Features:
Specs:
Color | Gray |
Height | 9 Inches |
Length | 14 Inches |
Number of items | 1 |
Weight | 1.18 Pounds |
Width | 10 Inches |
6. Antra AH6-260-0000 Auto Darkening Welding Helmet Wide Shade Range 4/5-9/9-13 Engineered for TIG MIG/MAG MMA Plasma Grinding, Solar-Lithium Dual Power, 6+1 Extra Lens Covers
- 【Safety & Protection】 Passive Filter with Permanent shade 13 to UV/IR, combined with double-layered auto dimming LCD shutter, providing sufficient and accurate shade range within 4/5-9/9-13 to visible lights; Full face neck coverage protecting welders from spatters and harmful radiant; Meets ANSI Z87. 1 Standards
- 【Comfort & Convenience】 Very light total weight, reduces head and neck stress; Fully automatic auto darkening lens, eliminating flipping up and down the hood; Convenient External Gridning switch for easy switching from Welding and Grinding.
- 【Performance】 4 Premium redundant arc sensors, with highly responsive detecting and controlling units providing super-fast switching time and accurate auto shading, minimizing harmful radiant bypass, avoiding eye stress
- 【Reliability】 Interference Suppression Technologies, minimizing false triggering: less sensitive to sun lights, workshop lights while very responsive to welding arc, even the hardest to detect DC TIG: Rating > 2 Amps
- 【Versatility】 A great personal protection equipment designed for industrial use that can handle multiple processes of Plasma cutting, abrasive wheel cutting/grinding, DC TIG, AC TIG, MIG/MAG, MMA/Stick welding, which are poular in metal fabrication industry, welding schools, welding shops, auto manufacturing and repair industry, ship factories as well as DIY hobbyists projects
Features:
Specs:
Color | Black Matt |
Height | 12 Inches |
Length | 9 Inches |
Number of items | 1 |
Release date | December 2017 |
Size | 3.86X1.73"(4/5-9/9-13) |
Weight | 1 Pounds |
Width | 9 Inches |
7. Welding Helmet, Black, 3350 Series
- This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box
Features:
Specs:
Color | Black |
Height | 10 Inches |
Length | 13 Inches |
Size | universal |
Weight | 3.2 Pounds |
Width | 10.5 Inches |
8. Welding Helmet, Shade 3 and 8-12, Black
Price For: Each Headgear: Ratchet Material: Nylon Features: 1/10, 000 sec. Lens Speed, Sensitivity and Delay Control 0.10 to 1.0 sec., TIG Rating 20A, Auto-On/Auto-Off Power Control Includes: (2) AAA Batteries, Magnifying Lens Holder, (5) Outside and (2) Inside Cover Lenses Grind Mode: No Color: Bla...
Specs:
Color | Factory |
Height | 9.4 Inches |
Length | 11.1 Inches |
Weight | 2 Pounds |
Width | 10.2 Inches |
9. Jackson Safety SmarTIGer Variable Auto Darkening (ADF) Welding Helmet with Balder Technology (37188), W40, Black
- The Jackson Safety ADF has a variable shade range from 9 to 13 to shield and protect the wearer's eyes from radiant energy during welding (mig welding, tig welding, arc welding)
- It's equipped with sensitivity and delay settings for adaptability for different environments and task durations; Enjoy enhanced visibility and color recognition.
- The lightweight, high-density plastic shell protects the wearer's face, forehead, neck, and ears from weld sparks and spatters; the aerodynamic curved front cover plate offers better reduced heat built-up, reflections and fogging than HSL-100
- Meets ANSI/ISEA Z87.1+2010 standard for high mass impact protection and welding use, and DIN requirements for production quality
- Comes with three headgear adjustments for the configurability to suit a variety of tasks; compatible with magnification filters and hard hats (sold separately)
Features:
Specs:
Color | Black |
Height | 9.7 Inches |
Length | 12.3 Inches |
Number of items | 1 |
Size | 9-5/8 inches x 9-3/4 inches x 12-1/4" |
Weight | 2.05 Pounds |
Width | 10.1 Inches |
10. LINCOLN ELECTRIC 2x4 C-Series Auto-Darkening Welding Lens Variable Shade 8-13 KP3775-1
World renowned lens technology provides crystal clear view of the arc and puddleThe exclusive Liquid crystal lens broadens the color RANGE & hues which can be seen in both light and dark StatesEliminates Color saturation for a true Color viewReduces eye strain for all day comfortHigh quality and con...
Specs:
Height | 1 Inches |
Length | 6 Inches |
Width | 1 Inches |
11. ArcOne S240-10 Horizontal Single Auto-Darkening Filter for Welding, 2 x 4", Shade 10
- Two independent sensors, High Definition clear view technology
- 5.25 square inches of active viewing area
- Switching speed of 0.5 milliseconds
- Water and dust resistant
- Dark to light state delay of 0.2 seconds
Features:
Specs:
Color | Shade 10 |
Height | 0.99999999898 Inches |
Length | 7.49999999235 Inches |
Number of items | 1 |
Size | 2 x 4" |
Weight | 0.3 Pounds |
Width | 5.49999999439 Inches |
12. Lincoln Electric K3034-4 VIKING 3350 Welding Helmet, Black
- · PREMIUM OPTICS – The 3350 Series features the exclusive 4C lens technology which creates a crystal clear, true color view of the arc and puddle. This enhances your control and increases weld quality while reducing eye strain. Additionally, the 3350 series lens has a 1/1/1/1 optical clarity rating which showcases the absence of common lens imperfections such as blurriness and distortion while also providing consistent brightness and performance at an angle.
- · EXTRA LARGE LENS - The 12.5 square inch auto darkening lens provides a large field of view to offer enhanced application versatility, increases productivity and also has added safety benefits.
- · SUPERIOR COMFORT - The one-of-a-kind X6 Headgear contours to the operator’s head to evenly distribute weight across six key contact points. This improves balance, eliminates pressure points and provides a personalized fit for maximum comfort.
- · INCREASES PRODUCTIVITY - Innovative low-profile external grind button allows you to quickly switch between weld and grind modes without having to remove the helmet or your gloves.
- · 3 YEAR WARRANTY – Comes with hassle free 3 year warranty from your date of purchase to protect your investment.
Features:
Specs:
Color | Black |
Height | 10.4 Inches |
Length | 12.6 Inches |
Weight | 3 Pounds |
Width | 10.6 Inches |
13. Hardhat,860P Leathr Helmt
Rugged, breathable leather covering.Flexibility makes it perfect for overhead welding or working in confined spaces.Lift-front viewing window.
Specs:
Height | 5.88 Inches |
Length | 13.38 Inches |
Number of items | 1 |
Weight | 1.48 Pounds |
Width | 10.38 Inches |
14. 3M Versaflo Heavy Industry PAPR Kit TR-300N+ HIK 1 EA/Case,Beige
- KIT INCLUDES: Respiratory hard hat assembly, PAPR unit, battery and charger, belt, particulate filter, filter cover, spark arrestor, pre-filter, breathing tube, and airflow indicator
- RESPIRATORY PROTECTION: When used in accordance with its NIOSH approval and user instructions, TR-300N-plus provides protection against particulates Not intended for vapors or gases and not an intrinsically safe system
- EASY TO USE: Simple, one-button operation (2 types of alarms - 1 audible and 1 LED); breathing tubes featuring 3M Quick Release Swivel (QRS) connection; and pre-calibrated PAPR
- STAY COOL: Uses a blower instead of lung power to draw air through the filter This lets you breathe more naturally and stay comfortable in hot, humid conditions
- COMFORTABLE DESIGN: Hard hat is lightweight and well-balanced Includes 6-point textile straps, premium visor made of coated polycarbonate, and premium faceseal made of flame-resistant polyester
- SLIM PROFILE: Designed for use in tight spaces, and its smooth, contoured outer surfaces may be less prone to snagging on nearby objects
- HIGH CAPACITY LITHIUM-ION BATTERY: Run time with new battery pack, clean filter and full charge is approximately 8-12 hours allowing you to work for extended periods of time
Features:
Specs:
Color | Beige |
Number of items | 1 |
Release date | October 2018 |
15. Save Phace 3011674 Kannibal 40-Vizl2 Series Welding Helmet
- World's largest viewing area of over 40 sq. Inches
- World's 1ST and only 4"x4" ADF integrated into a 180 Degree welding lens
- World's fastest Protective lens change system
- New articulating multi point adjustabe halo headgear
- Cheater lens compatible
Features:
Specs:
Color | Multicolor |
Height | 10 Inches |
Length | 9 Inches |
Number of items | 1 |
Weight | 2 Pounds |
Width | 9 Inches |
16. JACKSON SAFETY Passive Welding Helmet, Black
- W10 series passive welding helmets are perfectly suited and priced for the cost conscious welder
- It offer a clear, unobstructed view of the weld puddle and come equipped with a shade 10 polycarbonate filter
- Ideal for students, hobbyist and inspectors
Features:
17. Hobart 500550 Auto Arc 130 Wire Feed MIG Welding Kit
Solid welder for home useFixed flow MIG regulator and hose assemblyOperates off 115-volt household currentComes with with helmet, regulator, and cart7-Foot work lead, 6-Foot power cord
Specs:
Number of items | 1 |
18. Autodarkening Welding Helmets Optrel E680 Dk Bl
- This is drop shipped from Optrel 1-3 days to ship
Features:
Specs:
Color | Dark Blue |
Height | 9 Inches |
Length | 8 Inches |
Number of items | 1 |
Weight | 1.08 Pounds |
Width | 9 Inches |
19. Jackson Safety Durable, Comfortable, Hard Hat Adaptable, Fixed Shade W10 HSL 100 Welding Helmet, Black, Universal Size, 14975
- DURABLE DESIGN – Jackson Safety welding helmet features a durable design with added lip for slag and other hazards; the welding hood standard shade 10 filter plate and cover plates are factory installed
- ADAPTABLE & UPGRADABLE – This shield is hard hat adaptable and can be easily upgraded for use with Jackson Safety Insight, Tru Sight II, and Nexgen filters to make this welding helmet auto darkening
- MULTI-USE – Auto darkening welding helmet features a narrow shell design that's best for working in tight spaces
- EXTRA SAFETY – The welding mask has an extended front, which increases throat protection from sparks, slag, fumes, and other physical hazards
- COMPLIANT – This welding hood is CSA compliant and meets ANSI Z87.1 standards
Features:
Specs:
Color | Black |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 25 |
Weight | 2 Pounds |
Width | 1 Inches |
20. Jackson Safety 370 Replacement Headgear (20696), Adjustable Jackson Welding Helmet Parts, Black and Gray
- FITS MULTIPLE CAMERAS - Compatible with original Gopro Hero, HERO 2, HERO 3 (NOT THE 3+), SJCAM, SJ4000, SJ5000, and many other action cameras. Also for FPV cameras like the HS1177, HS1190, Runcam Swift Cameras and many others. PLEASE NOTE this lens will NOT work with the Gopro 3+, 4, or 5
- PRECISE DESIGN - Viewing Angle: 170° - Focal Length: 2.6 cm - Aperture range: 2.8 - Lens Weight: 6 grams
- EXCEPTIONAL CONSTRUCTION - Tough metal and glass design with M12 Thread Count and tapered end for easy installation
- HIGH QUALITY IMAGES - 2.5mm Ultra-Wide Angle Lens allows more light in to the lens
- WE GOT YOU COVERED – With the purchase of this Gopro lens we offer a 1 year Limited Warranty to ensure your complete satisfaction. Any damage, defects, or breakages are covered. Just reach out to the Impact Imagery customer service team if any issues arise.
Features:
Specs:
🎓 Reddit experts on welding helmets
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where welding helmets are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
It’s not my favorite. There’s a sliding scale with welding hoods imo. It’s green on the left and color on the right. The speedglas is the greenest out of all the expensive hoods. Its got good clarity and is very comfortable on the eyes but has very little color and is difficult to use in the light stage for example for grinding. Then there are hoods like the optrel and arc one, they have an incredible amount of color and clairty but it isn’t as comfortable on the eyes. It also is very easy to work with in the light mode. I used to really want a speedglas because I used to think that they were the most advanced hood. I now know that they are the least advanced hood in terms of technology. I was pretty underwhelmed when I got the chance to weld with one.
I don’t want to unduly worry you but I would take honestly take a passive $40 hood or a $130 auto dark over the speedglas because I need that clarity and color in the light stage and the color in the dark stage. I just can’t see the puddle that well in the speedglas as I can with the arcone singles 240hd or arcone bffvx or the lincoln hoods or the sentinel A50 or even passives.
I attached an amazon link with the 3350, I suggest you read the first review, that guy had a speedglas. Either way, i’m sure he’ll love it. The speedglas isn’t a bad hood and i’m sure it’s an improvement on what hems using.
Lincoln Electric K3034-4 VIKING 3350 Welding Helmet, Black https://www.amazon.com/dp/B07V9G94NK/ref=cm_sw_r_cp_api_i_fn0VDb1PB1V96
Details:
Based of this post by /u/veriix and the headstrap adapter by /u/nw15062 using this as the headstrap replacement.
It blows my mind how well it works. It took a bit of tweaking, sizing, etc, to get it set up just right. I was skeptical thinking it might only make a very VERY slight difference compared to the default Vive velcro straps... but thankfully I was mistaken. It makes a huge difference.
The headstrap seems to hug your head like I imagine the PSVR head-mount does. All the extra cushion really helps, and thanks to the slight downward angle of the adapter between the straps and HMD itself, there is a super handy pivot outwards effect that when worn, the headset just ever-so-gently slips down towards your face with only about ~5-10% of the pressure compared to the default straps.
Basically, it essentially eliminates the all of the weight from the HMD resing on your forehead / cheekbones... and taking it on and off is super comfortable as it pivots up and out, away from your face when taking it off or peeking out from under.
EDIT: After playing with it for a bit, I have came to the conclusion that it's about 20% more comfortable on the head, but removes about 90% of the front-weight face pressure. It could be more comfortable around the temples when tightening it all down.
The leather pipefitter ones are pretty sweet... My buddy has an old one that he uses as a backup. Plus you won't catch your head on fire. Might also come in handy in a zombie apocalypse.
Hobart makes a pretty solid one too. Things to look for are replaceable glass and headstrap adjustments. The one i have uses the same headstrap assembly as a hardhat so i can buy a new assemble when the old one gets gross (from sweat and grime). I really like the auto dark ones. They aren't as solid as an old-school style one but they are really handy.
The safety glasses are pretty cool too. I wouldn't want to make big welds with them but they are nice if you're tacking something together. Make sure they're for ARC welding and not oxy. Oxy/Acetalyne glasses are lighter than arc glasses and they will burn your eyeballs out if you use them while arc welding.
Also it's a good idea to have a plain piece of glass so you can weld in a pinch. I keep one in my 4X4 when i run trails just in case i have to battery-weld something.
Leather hood via amazon.com
Flip up dark glasses via amazon
If you are talking sub-$100, I really like this combo: get a cheap, new or used pipeliner style hood with a 2x4 lens. Jackson, Honeywell, etc. Then go on Amazon and buy the ArcOne Tradesman auto-darkening lens for $70 (currently), shade 10 with a 3-year warranty. You'll get an indestructible hood you can trash around with an excellent and lightweight lens, great clarity and color, and can easily swap the lens between hoods or trade out for a fixed-shade lens if needed. I've been really happy with mine.
Welding headgear- any should do if you happen to have one laying around, but you want to make sure it has 2 straps over the top instead of just 1 which you find with the cheaper ones. It provides more distributed support. This one should do. I use this one, but the one I found for you just seems better.
.
3D printable adapter piece that connects the Vive to the Welding mask. If you do not have access to a 3D printer this job may cost you ~$15-20.
.
That's it, all you would need to do it cut off the front piece of the mask so the sides are flush and use some zipties or velcro to attach the cable coming from the HMD to at least one of the 2 straps on your head for further stability. Overall the price to purchase everything fresh would probably lean around $40-45. If you feel the integrated headphones are worth if for the extra $55 + HTC Shipping then go for the DAS, for me though it was a non-issue.
EDIT: If you need pictures of my setup I can post them, but once you get the parts it's pretty intuitive what you need to do.
I don't think there's anything wrong with that unit per se, but you have to ask yourself if it will truly be used. It looks heavy and prone to fogging to me, and I know that if it were me, it would most likely quickly be relegated to a drawer somewhere and forgotten about.
The most dangerous dust from woodturning occurs when sanding, so many folks opt for only wearing dust protection at that time and going without a faceshield during that operation since it's also when there is the least danger of a piece exploding / unexpected dismount. Everyone has to decide on their own comfort level of safety protocols but I'd say the above is adequate protection for an otherwise careful hobby/occasional turner. At the other end of the spectrum, most pros that are going to be exposed to dust for days on end eventually opt for something like this:
https://www.amazon.com/3M-Personal-Protective-Equipment-Versaflo/dp/B07K15G1F6/ref=sr_1_7?keywords=3m+papr&qid=1565888996&s=hi&sr=1-7
And, it's important to note, dust collection at the source while sanding is far more important to the overall picture in terms of dust safety and health than PPE.
I and a majority of the guys I work with use this hood with a gold lens (I use a comfort gold lens, but good luck finding a place online that sells them). Order some surgical tubing to replace rubber band on the head gear and you're good to go.
Learning to flip your hood down is part of the game if you choose to run a passive lens. I would suggest at least learning to use a passive hood so that in the event that something happens to your auto-dark you will not have any problems switching to a passive.
Work in a heavy duty fab shop, run a pipeliner with an auto in it. I've got the flip-up on it, which is extra handy given the policy on faceshields while grinding. A lot of other guys use the modern style hoods (company provides an adflo for everyone, or they just use their own "normal" auto dark). But they always have to switch between weld and grind modes or switch to a hood with just a clear in it to grind, they don't wanna grind on the expensive clears. I just flip the lens and grind away. Super light, doesn't reflect much light inside because of the chin, never catch sparks on my neck or chest. I'd highly recommend the pipeliner with an autodark in it for school, even if it's not the flip up (the flip up has some lens thickness restrictions since it slides in the side like a pancake, had to file the opening out a bit on mine). Get a gold 10 as well to run open roots with, sucks if your lens flickers the entire time you're doing those with stick.
Mine is the rubber band headgear, which was instantly replaced by surgical tubing. Had it for almost 2 years now and the only other hood I own is a pancake.
Hood w/ flip
Lens. I've run everything from TIG at 50 amps to 1/16" dual shield at 29v 300 wfs with that lens, love it. We'll see how it holds up to mcaw on monday.
I'm not a pro welder or anything, but I upgraded from a cheap HF model to this Lincoln and am pretty happy with it. https://www.amazon.com/Welding-Helmet-Black-3350-Series/dp/B019G6T4RS/
Also figured out I had left some of the green tinted packing plastic on for like almost a year, and it still had better visibility than my old helmet that whole time.
I bought a Save Phace helmet about a year and a half ago and I love it. Nice sized lens and peripheral lenses as well. I think it’s a nice weight too.
This one to be exact:
Save Phace 3011674 Kannibal 40-Vizl2 Series Welding Helmet https://www.amazon.com/dp/B00O5F4IG8/ref=cm_sw_r_cp_api_IMIEAbKXG5JEG
get a fibre metal tiger hood like this and learn to use a regular mask, they last a long time and are cheap. https://www.amazon.com/Fibre-Metal-Honeywell-5906GY-Piece-Helmet/dp/B007NL1S5K/ref=asc_df_B007NL1S5K/?tag=hyprod-20&linkCode=df0&hvadid=242010195282&hvpos=1o1&hvnetw=g&hvrand=13228633230741582025&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023934&hvtargid=pla-593944233034&psc=1
for a welder, buy a used lincoln 225 AC buzz box and learn to use 6011, its the best rod to get good at. all other rods are fairly easy to run. look on craigslist. all you need for clothing is a long sleeve shirt like a dickies work shirt they are $20 at walmart and get welding gloves at a welding store or tractor supply. also wear safety glasses when chipping welds. go to a junkyard for scrap steel to practice on.
You can cut it and add leather but yeah it’ll pour light in and I can’t stand that. If you want a passive big window just look at a Jackson HSL 100 I use one as well as a sugar scoop and I love it.
I don't know if it's a direct fit, but best comfort Is the Miller headgear. I modified my helmet to fit it, and it sits on my head so nicely.
https://www.amazon.com/Miller-Electric-256174-Headgear-Helmet/dp/B00826AM7A
Well, you could try to find a used Oxy-acetylene gas torch set on Craigslist, or pick one up for super cheap and teach yourself to weld. This one is under $400 but I have no idea how good it is. Do a little research and you can be welding in no time. Gas welding is more difficult to MIG or Arc, but still super fun. You could get a Hobart MIG set here for under $500. Hobart is ok. Miller or Lincoln are much better. The problem with looking into a MIG or ARC set up is you need more power. Some of them run off 110/15A (common house hold breakers), but most of them require more power than that.
Thanks for posting
Unfortunately, new and low karma accounts cannot create submissions in /r/Vive. Please participate in the comment sections first. The participation requirement is minimal. Do not message the moderators asking for an exception
------------------------
Below is a copy of the removed submission
Custom Head mount for vive by nw15062
Hi,
I wanted to share my creation, my original Vive head strap started to come apart so I sent it out to be warranty replaced, in the meantime I bought a welding mask headgear from amazon. Removed the front strap and 3d printed some left right bracket.
This unit allows for depressing a button on each side and removing the HMD by pulling it forward from the face, quick release essentially, leaving the head strap on your head while removing the HMD. also the knobs on the side can be loosened and the whole thing can flip up onto my forehead.
I have the STL files for 3d printing if anyone is interested I have posted them because I am continuing to make fine modifications.
[Head Gear] (https://amzn.com/B00826AM7A)
(http://i.imgur.com/AbpRteQ.jpg)
(http://i.imgur.com/GmJO2tg.jpg)
(http://i.imgur.com/eTn3yJ3.jpg)
(http://i.imgur.com/Bu8ALe1.png)
I hope the images display properly, this is my first reddit post.
	
	
	
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
It's made by Honeywell, but you'll see them advertised as "Fibre-Metal Pipeliner". Not sure if Fibre-Metal is what they call the material (Which seems to be some sort of fiberglass variant), or if it's a subsidiary brand of Honeywell. THIS is the right one, and the exact one I have.
But as a word of warning, I hate the stock headgear. Some people seem to love it, but I couldn't get used to it. It's basically a rubber band on a clip, and I broke mine the first day I had it. I switched it out with THIS Jackson headgear. You'll have to drill out the square hole that the existing headgear uses, and then drill a few smaller holes where the adjustment tab clicks in. I had an easy time since the hood I use for TIG is a Jackson hood that uses that same headgear so I was able to make a template. If you're interested I could try to figure out what size the holes need to be and send you a picture of the layout tomorrow.
Also, if you want a flip-lens, Sellstrom sells a flip lens mod, but it does require significant cutting. I bought one a while back, but haven't had the guts to install it yet (Plus I'm worried about the extra weight.). Very handy if you're switching between welding and grinding a lot, or if you want to save your neck and avoid doing the nod every time you strike an arc.
Outlaw Leather also sells pre-modified Pipeliners. They're a little bit too out there for me, but I've seen a couple around the shop and they definitely get a lot of looks.
I don’t know of any commercial alternative. I made my own halo style mount to have some relief from that annoying face pressure of the original strap (see image in previous post).
Sebastian from MRTV made a mod with the Vives Deluxe Audio Strap
A cheaper mod would use something like this welding headgear (one Go user posted that some time ago).
I purchased one of those myself but didn’t explore that solution any further. But the weight distribution would probably be much better compared to the original strap.
Favorite helmet would have to be a Optrel Satellite helmet as it has the most comfortable headband and I prefer the color. I also prefer the shape as it lets you get into tighter spaces easier than the Miller Helmets. The major reason however is having the "grind mode" button on the outside which is HUGE IMO.
If you are stuck with Miller than I would go with the titanium since Miller is behind the times and doesn't provide a "grind mode" button on the outside of the helmet. At least with the titanium you can flip up the front when you want to grind.
I weld with this http://www.amazon.com/Jackson-Safety-SmarTIGer-Auto-Darkening-Technology/dp/B00BFJLRD4/ref=sr_1_2?ie=UTF8&qid=1396466077&sr=8-2&keywords=smartiger+welding+helmet
It works really well and it is about as heavy as a HF helmet(so not super light) but is really comfortable and is pretty cheap right now!(i got mine for 100 also, i think they are clearing out last years models)
My list would go:
Philips safety lens shade 12 (Absolutely amazing quality I never went back to an AD lens): http://www.phillips-safety.com/welding-safety/green-welding-lenses/welding-lens-small-2-x-4-25-green.html
New lincoln 4c 2x4 sens/shade/delay controls: https://www.amazon.com/gp/product/B07TMQRTX1/ref=ox_sc_act_title_1?smid=A1X3HB95POB91O&psc=1
Arc One HD or whatever their latest model is.
Also this video could be some help: https://www.youtube.com/watch?v=G1JiVB41WPI
I had my digital elite stolen a few months back; I had picked up a Jackson fixed shade from my local supplier to tied me over until I saved up for a digital infinity, I never ended up buying the infinity I loved the Jackson so much.
Its cheap, lightweight, has comfortable headgear, as well as a huge viewing area.
https://www.amazon.com/dp/B009I2Y3E0
Hi,
I wanted to share my creation, my original Vive head strap started to come apart so I sent it out to be warranty replaced, in the meantime I bought a welding mask headgear from amazon. Removed the front strap and 3d printed some left right bracket.
This unit allows for depressing a button on each side and removing the HMD by pulling it forward from the face, quick release essentially, leaving the head strap on your head while removing the HMD. also the knobs on the side can be loosened and the whole thing can flip up onto my forehead.
I have the STL files for 3d printing if anyone is interested I have posted them because I am continuing to make fine modifications.
[Head Gear] (https://amzn.com/B00826AM7A)
[Photo 1] (http://i.imgur.com/AbpRteQ.jpg)
[Photo 2] (http://i.imgur.com/GmJO2tg.jpg)
Photo 3
[Bracket] (http://i.imgur.com/Bu8ALe1.png)
I hope the images display properly, this is my first reddit post.
This is a little project I've been working on, it's a pair of adapter pieces that allow the Vive headstrap to be replaced with a commercially available welding headgear, found here. This was primarily inspired by a response made to one of my posts a month ago, which was the same idea but for a different headgear:
https://www.reddit.com/r/Vive/comments/4l93dt/custom_vive_headstrap_based_off_commerically/d42vmpf
The main advantages that using a welding headgear gives you is that the Vive can be "flipped up" above the head when not in use, and the Vive isn't pulled against the face as much.
I'll post some photos showing it in action soon (I need to have a shave first/my beard is bloody awful), hopefully you guys like it!
Get a fliphood hood with an auto darkening lens. This is what I use everyday and I would never go back to the other hoods. When I need to grind flip up and full face protection. When I weld flip down and auto darkening
(1). Fibre-Metal by Honeywell Classic https://www.amazon.com/dp/B007NL1S5K/ref=cm_sw_r_cp_api_i_.AhRDbG4Y6KVY
(2). ArcOne T240-10 Tradesman https://www.amazon.com/dp/B003WE9XXQ/ref=cm_sw_r_cp_api_i_UzhRDbB3SG6EQ
Just make sure to use 3 protective lense
(3). Protective lense. " https://www.amazon.com/dp/B07QC67KR8/ref=cm_sw_r_cp_api_i_yEhRDb8CTXD1B
One for the front when it’s down. And when it’s up, One on the hood to protect your face. And the last one again when it’s up to protect the backside of the auto darkening lense.
Also the auto darkening lense and the protective cover are called 2x4. And 2x4 lense should fit In the hood.
Does he have his own helmet? The miller classic series that has auto darkening is under 100 and it's what I'm using in class right now.
miller classic series auto darkening #251-292
https://www.amazon.com/Welding-Helmet-Shade-8-12-Black/dp/B005J4P2SM
There might be better ones but for 80 bucks if he don't have one it's a great starter.
The page says "12 pieces available", not too sure if I buy 1 "piece", or if I need to up my quantity to 12 to get all the pieces.
I guess I'm confused because it's not clear which pieces I'm electing to buy...
Edit: Thinking of buying this instead. Any thoughts? Think it'll do what OP's been able to muster? I know NOTHING ^^^^^John ^^^^^Snow about welding helmets and thier accessories, but I want a better mounting solution soooooo bad...
If you want to get fancy and comfy, buy the straps for a welding helmet. They're designed to be worn all day, have a built in sweatband, and have a really cool ratchet tightening mechanism:
Jackson Safety Headgear
Hope this helps!
I actually use an Sellstrom Pipeliner sith an ArcOne HD 240 Lens. I prefer that combo to any factory auto dark that I have used. And then you have a flip front auto dark for less than 200 bucks!
Hood is $57.55 on Amazon
https://www.amazon.com/Sellstrom-S28301-Lightweight-Retainer-Seperately/dp/B005I4OR3O/ref=mp_s_a_1_8?ie=UTF8&qid=1550342455&sr=8-8&pi=AC_SX236_SY340_QL65&keywords=sellstrom+welding+helmet&dpPl=1&dpID=41G1Mzat10L&ref=plSrch
Lens is $81.33 on Amazon
https://www.amazon.com/ArcOne-S240-10-Horizontal-Auto-Darkening-Welding/dp/B00206Y4B8/ref=mp_s_a_1_1?ie=UTF8&qid=1550342517&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=arcone+singles+240+hd&dpPl=1&dpID=31eQwi4jRUL&ref=plSrch
Hope this helps! I have 3 of these setups now and I won't go back!
Pipeliner welding hood
Tillman 850 welding gloves I highly recommend these gloves. The palm is unlined so you have plenty of dexterity to stick, mig, or tig with. The back is insulated to protect you from burning to a crisp.
Wrangler work shirts (get a few of them) I wear these shirts every day for work. Depending on your budget, you may not be able to get a few of these versus one decent welding jacket. If that's the case, I recommend a heavyweight denim jacket or the basic FR green welding jacket.
Safety glasses (get a few of these, as well as a dark pair for cutting)
Steel or composite toe work boots. I'm not going to recommend a pair... everyone is different. I do prefer Carolina boots and Thorogoods, though.
Ear plugs... can be bought at Lowes or any supply store.
That's your basic safety list. You won't need much more than that for school. Hopefully for you, they will provide tools. Otherwise this is a basic list for a welder's bucket:
2 crescent wrenches, 12" (or spud wrench)
Welpers
Chipping hammer
25' tape measure
Torpedo level
Combo or speed square
Vice grips
Channel locks
1 half round bastard file
1 flat file
2 wire brushes (one for carbon, one for stainless)
4.5" angle grinder (or 6" if you want)
Die grinder (optional)
This is, honestly, all you will ever need as a welder. If you end up with a job that does other mechanical shit, you will need more tools like a set of wrenches, ratchet and sockets, various clamps, etc.
I usually work for bigger contractors that will supply all the power tools and typically have a gang box of hand tools that supplies what I don't have or don't want to bring. When I go to work, I bring my 5 gallon bucket (for a seat mostly), and a canvas backpack. In the bucket is that list above. I put shit I need in the canvas bag if I'm going to be moving around between joints so I don't have to lug around a heavy bucket. At any given time there are only a few main tools in my bag. A chipping hammer, a wire brush, a file, a level, combo square, a 4lb hammer, flashlight, and my tungsten holder. It's all you will ever really need if you're just welding.
This one's been going strong for 2 years. I did have to drill an extra hole it two for the little pins that adjust the to make it work, but it's better than what the hood came with
I'm not sure how well it works with stick arc, but this helmet works great with TIG and has a shade variability from 4-13. 4 sensors on it as well as a delay and sensitivity setting on it. It changes in the same speed that the one you found changes in and i think all the parts of replaceable including the batteries.
I already posted this in viveforsale. Hopefully this minor cross post is allowed.
The mod is made from a miller headgear (https://www.amazon.com/dp/B00826AM7A/ref=cm_sw_su_dp) and a 3d printed part: http://www.thingiverse.com/thing:1696706
I thought it would flip up like a welder's headgear. It does not and I don't use it. Looking for a good home and will consider a wide rage of trades. I'm in Toronto.
The 3d print is visually a bit crude where it connects to the headset as you can see in the photos. The connection is solid and works perfectly. PM me
Pretty sure this
Pretty much just this https://www.thingiverse.com/thing:1696706 and the miller headgear from cyberweld (amazon has it but its like 10 bucks more when I ordered) then add kross porta pro and a couple guess drills because the hole on that bracket is terrible for me... pretty simple
> one of these
I'm going with this-
http://www.amazon.com/Jackson-Safety-Replacement-Headgear-Adjustable/dp/B004RIFGE6?ie=UTF8&psc=1&redirect=true&ref_=ox_sc_act_title_1&smid=ATVPDKIKX0DER
It is more expensive but it looks like one piece that you can take the side knobbies off completely. The only adjustments are the top strap and the back knob.
Have this lens in my Huntsman 900 series slide lens. Works great!
https://www.amazon.com/gp/aw/d/B003WE9XXQ/ref=yo_ii_img?ie=UTF8&psc=1
I love my gray Tigerhood. Flip-up lens for a lot cheaper than that pipeliner.
wow that is cheap. it costs 79 euros in germany.
https://www.amazon.de/Headgear-Helmet-Miller-Electric/dp/B00826AM7A/ref=sr_1_1?ie=UTF8&qid=1483811542&sr=8-1&keywords=miller+headgear
I really want to get a 2x4 flip lens with a progressive of shades, not sure what gold has to do with it though. Then have a auto dark lens to put in when I'm feeling fancy or whatever
Edit: After snooping through some the comments helmet suggestions, I have quite liked your miller. Found this one
Here's all the info:
Head strap replacement
Head strap to HMD adapter Shout out to /u/nw15062 for creating this!
Replacement Face pad: About Face VR (no longer in business)
Headphones: Koss PortaPro Shout out to /u/Mister-S for the original built-in headphones tutorial
Besides that I used a bunch of velcro straps for cable management and plastic velcro to keep the headphones mounted - I'll see if that becomes an issue down the line but it's working fine now.
Exactly.
Helmet
Helmet
Helmet
Helmet
Going beyond 3M Speedglas:
Helmet
Helmet
Helmet
Helmet
Helmet
Helmet
And last but certainly not least:
https://en.wikipedia.org/wiki/Welding_helmet
I know a guy who swears by this helmet he got on the cheap while attending trade school. And Lanse from Youtube (Chucke2009) likes the brand, too. He did a review on a more expensive one, but this one should be fine for a budget starter. I have a Miller one and a Radnor one, both $250+
ArcOne Tradesman https://www.amazon.com/ArcOne-T240-10-Tradesman-Auto-Darkening-Horizontal/dp/B003WE9XXQ/ref=sr_1_1?ie=UTF8&qid=1485026022&sr=8-1&keywords=arcone+tradesman in a https://www.amazon.com/Fibre-Metal-Honeywell-5906GY-Piece-Helmet/dp/B007NL1S5K/ref=sr_1_1?ie=UTF8&qid=1485026206&sr=8-1&keywords=metal-fibre++5906 on a https://www.amazon.com/Fibre-Metal-Roughneck-Fiberglass-Hard-Hat/dp/B009IU2OOS/ref=sr_1_34?ie=UTF8&qid=1485026309&sr=8-34&keywords=metal-fibre+hard+hat also had a https://www.amazon.com/Lincoln-Electric-VIKING-Welding-Technology/dp/B019G6T4RS/ref=sr_1_1?ie=UTF8&qid=1485026380&sr=8-1&keywords=viking+3350 which was great to use when hard hat wasn't required but it was stolen. Really, different helmets are good for different jobs.
I recently started teaching myself to MIG weld in my garage, and went with these products:
I can attest to them being quality products, especially considering their price. I didn't get a cap, because I didn't really know that was a thing... but I just wear a baseball cap backwards and it seems to work fine.
For anyone interested in making this.
Here is the welding headstrap: https://www.amazon.com/dp/B00826AM7A/ref=cm_sw_su_dp.
Adaptor stls for the vive: http://www.thingiverse.com/thing:1620362.
And the valve knob for the back: http://www.thingiverse.com/thing:2029488
Yeah it’s I higher end hood I also have a fiber metal pipeliner hood with a auto tint filter lenses Auto tint filter lenses that set up would be like $140 ish maybe lower that is a very rugged hood they last forever
May as well go for one of these too http://www.historicalclothingrealm.com/chainmail-shirt-hauberk.html
And don't forget this...
http://www.amazon.com/gp/product/B00BWAEYV8/
Be sure to wear one of these when you do.
Are you using this one? I found that if you move the middle strap so it sits further back on your head it tends to sit better. Also, did you cut the front strap off?
can’t go wrong with the pipeliner by fibre metal. I cut off the front and put a sellstrom flip front and an auto darkening lens in. The clear lenses should be supplied at just about every employer and they are cheap anyway.
hood
flip front adapter
auto lens
clear lenses
I also have a Lincoln viking 3350 and I absolutely recommend it but I prefer my custom pipeliner.
Edit: Also, you can keep the fixed shade in your bag just in case your auto lens malfunctions.
That's a pancake hood. It's essentially goggles with a face shield attached, and a shield on the side, it prevents glare from the sun from getting in your eyes, and the shield keeps slag and shit from falling onto your face.
A Pipeliner (also known as the best helmet ever manufactured) is this. It's lightweight, indestructible, paintable, and has the sex appeal of a shirtless Theodore Roosevelt punching a bear. That's a lot of sex appeal.
Fibre-metal Pipeliner coupled with either a glass gold shade 10 or a Tradesman auto-darkening lens for $60
I would suggest starting with the passive, but whatever lens you choose i would still go with the pipeliner because of it's durability and lightweight.
The headgear alone is $22. Did you 3D print that as well?
I have this one.
https://www.amazon.com/dp/B00206Y4B8/ref=sr_ph_1?ie=UTF8&qid=1482617170&sr=sr-1&keywords=arcone+s240
Antra AH6-260-0000 Solar Power Auto Darkening Welding Helmet with AntFi X60-2 Wide Shade Range 4/5-9/9-13 https://www.amazon.com/dp/B00BWAEYV8/ref=cm_sw_r_cp_apip_R8fk6QqN7m16t
Here is the mobile version of your link
This https://www.amazon.com/gp/aw/d/B00826AM7A/ref=mp_s_a_1_1?ie=UTF8&qid=1499195233&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=miller+headgear&dpPl=1&dpID=41v%2BVoT0zAL&ref=plSrch
I decided to get this slightly more expensive one: http://www.amazon.com/Jackson-Safety-Replacement-Headgear-Adjustable/dp/B004RIFGE6/
I'll let you know Tues night!
Just get one of these
"Jackson 370 headgear"
http://www.amazon.com/gp/aw/d/B00826AM7A?pc_redir=1407399360&robot_redir=1
This one
Lincoln Electric 2X4 C-Series Auto-Darkening Welding Lens Variable Shade 8-13 KP3775-1 https://www.amazon.com/dp/B07TMQRTX1/ref=cm_sw_r_cp_apa_i_tZKODbVFFRHDM
I bought one of these a few years ago when I started getting into hobby welding with a cheapish flux core MIG machine (Lincoln weld-pak HD), and it's been great.
I don't know how well it would stand up to heavy use, but for me it's been a great helmet, and dirt cheap. Once I got the sensitivity and delay dialed in, I've never had any problems with arc flash (apart from the few times I forget to lower it >_<).
This is what I purchased: https://www.amazon.com/gp/aw/d/B00826AM7A
I cut off the front portion where the foam is.