Reddit mentions: The best arc welding rods
We found 4 Reddit comments discussing the best arc welding rods. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 4 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Bernzomatic AL3 Aluminum Brazing/Welding Rods with 12-Inch Rods of Working Temperature 720-750 Degrees, 2-Piece
- Package Weight: 0.01 pounds
- Brinnell hardness: 100
- Working temp: 700-750 degrees
- Made in United States
Features:
Specs:
Height | 14.5 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | 1 |
Weight | 0.33 Pounds |
Width | 0.2 Inches |
2. Forney 31210 E6011 Welding Rod, 1/8-Inch, 10-Pound
- The product is 10LB 1/8 6011 Weld Rod
- Easy to use
- All position welding, all purpose rod for deep penetration and fast freezing on dirty, rusty and painted materials
- Smooth arc wetting and spread with good spatter providing fast deposition and flatter contour fillets offering faster travel speeds^Minimal surface preparation required
- Minimal surface preparation required
- Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications
- Dependable and ideal for AC operation, can be welded DC+ too
Features:
Specs:
Height | 2.25 Inches |
Length | 14.63 Inches |
Number of items | 1 |
Size | 1/8-Inch |
Weight | 10 Pounds |
Width | 4.38 Inches |
3. WeldingCity 1-Lb ER308L Stainless Steel TIG Welding Rods 1-Lb 1/16"x36"
Premium quality ER308L stainless steel TIG welding rods 36"-length. Dia. 0.045" 1/16" 3/32" and 1/8".Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) long rods with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remai...
Specs:
Height | 3 Inches |
Length | 36 Inches |
Size | 1-Lb 1/16" |
Weight | 1 Pounds |
Width | 3 Inches |
4. Tungsten - 1/4x7 pure groundtungsten (5pk)
- AC,Generally used in the welding of aluminum or magnesium
- Good arc starting stability when used with AC
- Tip forms clean balled end
- Dia:1/4",Length:7"
- Material pure ground
Features:
Specs:
Height | 7 Inches |
Length | 0.25 Inches |
Number of items | 1 |
Weight | 2 Pounds |
Width | 0.25 Inches |
🎓 Reddit experts on arc welding rods
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where arc welding rods are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
if you do accidentally poke a hole, you can repair the pokie-pokie by brazing. I did it recently after a rock hit my radiator - incredibly surprised how easy it was. All you need is some Bernzomatic AL3 Aluminum Brazing/Welding Rods and a small propane torch. youtube for instructions
looks like welding rod
https://www.homedepot.com/p/Lincoln-Electric-1-8-in-37-E6013-Fleetweld-Welding-Stick-ED030565/100341085
Or here is links to 2 packs on amazon.
https://www.amazon.com/WeldingCity-ER308L-Stainless-Steel-Welding/dp/B007JCQSWQ?crid=2Z3W4UDZ0IKT4&keywords=1%2F16+tig+filler+rod&qid=1537992917&sprefix=1%2F16%22+tig&sr=8-10&ref=mp_s_a_1_10
https://www.amazon.com/ER308L-16-stainless-steel-welding/dp/B07BSW2B1H?keywords=1%2F16+tig+filler+rod+stainless&qid=1537993368&sr=8-5&ref=mp_s_a_1_5
Talk about perfect -- just... a bit pricey.