Reddit mentions: The best automotive turn signal lights
We found 21 Reddit comments discussing the best automotive turn signal lights. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 14 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Smoked Lens Amber LED Lights By GTinthebox Side Marker Turn Signal Lamps Update Kit For Jeep Renegade 2014 2015 2016 2017 2018, 2 Pcs
- Fits 2014-up Jeep Renegade side marker turn signal lights.
- Smoked lens side marker lamps plus a pair of amber yellow LED sidemarker lamp replacement bulbs.
- Plug and play installation with no modification required. Direct replacement of stock light assembly. No special relay needed. No need to replace bulbs again.
- Super bright LEDS have a faster on/off response time for driving safety & Perfect design enhances your car's exterior look.
- Waterproof IP65, shockproof, dustproof, 50000+ hours life-span, ONE YEAR WARRANTY.
Features:
Specs:
Color | Smoked Lens Amber LED lights(NEW) |
Height | 4.9 Inches |
Length | 7.5 Inches |
Number of items | 2 |
Size | Front Bumper Fender Side Marker Light |
Width | 1.9 Inches |
2. Partsam Pair 3/4" Mini Marker Light Turn Signal Light 1 Diode Amber Light,3 Wires
- Partsam ( 2 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Clearance Marker and Auxiliary Stop Tail Turn Light.
- Led Side Marker Light, Fender Marker Light, Clearance Light, Indicator lights, Aux stop turn tail brake light etc.
- Can be used as an aux lighting to your existing brake light, but not approved as a brake light.
- Outer Diameter: 26mm (1.02''); Inner Diameter: 16mm (0.63''); Wire Length: 200mm (7.87''); Recessed mount with included grommet, INSTALLATION REQIURES A 3/4" HOLE AT DESIRED LOCATION;
- EASY TO INSTALL - 3 Wire Connections: Black is Negative, Red+Black - high brightness, White+Black - low brightness; NOTE: This is a 3-WIRE assembly, meaning it can be used as both a turn signal And a marker lamp. But i am afraid that you can not use both functions simultaneously;
Features:
Specs:
Color | 2*Amber |
Size | 3/4 inch |
3. 2014 Jeep Wrangler Right and Left Side Park and Turn Signal Light Lamp Mopar OEM
- genuine mopar oem
Features:
4. JK Turn Signal Lights White DRL Amber LED Front Grill Signal Parking Lights Smoke Lens Replace 2007-2017 Jeep Wrangler JK JKU
- Special Halo Ring Design: The turn signal lights with Unique Halo Ring DRL Design, 3000K amber beam turn signal with 6000K cool white DRL, significantly strengthen the brightness when turn on the turn signals;
- Fitment: These LED turn signal lights fits 2007-2017 Jeep Wrangler JK JKU, these grill turn lights with halo ring brings your vehicle a fantastic look;
- Easy Installation: These turn signals with white halo are design for directly replaces factory grill turn signal without any modification require or additional parts. Red wire connects to daytime running light, usually install in 15 min or less;
- Outstanding Performance: 9-32V DC, these turn signal lights comes with high intensity LED chips, super bright lighting output, made of durable black light weight ABS plastic housing, tough PC lens, dust proof and shockproof. Faster on and off response time, makes your driving safer on road;
- Package & Warranty: 1 PCS Left turn signal light, 1 PCS Right turn signal light; 12 Month Warranty, providing kindly customer service, 24 Hours quick reply, any questions, do not hesitate to contact us.
Features:
Specs:
Color | Turn signal lights |
Height | 2.08 Inches |
Length | 3.42 Inches |
Number of items | 2 |
Width | 3.42 Inches |
5. Senkauto Motorcycle Cafe Racer Seat Frame Hoop Loop Tracker End with LED Brake Turn Signal Light for Suzuki Honda Yamaha (210mm Flat)
FITMENT: Cafer Racer Large CC Bike, Honda CB 500 /CB 550/CB 650/CB 750, Yamaha XS 750 /XS 850 /XS 1100, Suzuki GS 550/GS 650/GS 750/GS 850/GS 1100.FEATURES: Material:Stainless steel, Tube Size:1"=25MM, Size:210mm width as above picture shownLED LIGHTS: Come with Led light , Turn Singal Light ,Brake ...
6. JDM Style Clear Triangle Flush Mount LED Turn Signals Light (Amber)
Fitment: Turn Signals for Suzuki Honda Yamaha Kawasaki Sport Racing BikeEasy installation, fit directly into the fairing with no modificationLens Color: Clear; LED Light Color: Amber11 super bright amber LEDs mounted behind a clear lensPackage includes: 1 pair of LED turn blinker lights
7. Meerkatt 4x 3/4 Inch Mini Round LED Clearance Lights Front Rear Taillight Brake Stop Lamp Side Marker Indicator Waterproof Universal Truck Bus Trailer RV Caravan Boat Marine Tow 12V DC 2 Red + 2 Green
(Pack of 4) 3/4” Inch Round 2 Red + 2 Green. It can be function as clearance, side marker, identification light, turn signal light for Truck Car Bus Trailer Van Caravan Boat60 lumen each light with 3 pcs High Quality SMD LED Inside of the Lamp Offer Extreme Bright light with 50,000 hrs Life TimeMe...
Specs:
Color | Red+Green |
Height | 0.75 Inches |
Length | 0.8 Inches |
Number of items | 4 |
Size | 0.8 x 0.75 x 0.75 inches |
Width | 0.75 Inches |
8. Xprite Smoke Lens LED Side Mirror with White Spot Lights and Amber Turn Signal Lights for 2007-2018 Jeep Wrangler JK JKU
【FEATURES】Xprite Smoke Lens White Sidelight Rearview Side Mirror Integrates Driving Function in White & Turn Signal Function in Yellow, Providing Functional Peripheral Illumination for Night and Off-road Driving.【HIGH-INTENSITY LED CHIP】The LED Lights are a Custom Design w/ 3W Cree LEDs. Pro...
Specs:
Color | Smoke Lens |
Height | 12 Inches |
Length | 22 Inches |
Number of items | 2 |
Weight | 100 Kilograms |
Width | 5 Inches |
9. United Pacific (2) Amber 2" Round 9 LED Mini Custom Flasher Park Turn Signal Lights
Misc Auto Parts
Specs:
Weight | 0.85 Pounds |
10. LinkStyle Motorcycle Turn Signal Light Grip Bar Plug Strobe Side Marker End LED Handlebar Black 2-Pack
- BUILT TO LAST: Made of high-quality aluminum material with good performance of heat dissipation. With 100,000-hour life expectancy, low power consumption, longer lasting than conventional lights.
- SUPER BRIGHTNESS: 12 LEDs lights are very bright, 360 degrees visible. White color for day time running riding light, amber color for turn signal. It will give you extra safety while motorcycling at night.
- 2 IN 1 APPLICATION: It can be used as the handlebar end light and turn signal. Fit most motorcycles with a 22 mm handlebar or with a 10mm thread. Note: Earlier model motorcycles need to load resistors to prevent hyper flashing.
- EASY INSTALLATION: 3-Wire Design, the Black wire: negative, Red: Turning (Amber Color), White: Running(White Color). Simple installation, minor modification may be required.
- SATISFACTION SERVICE: Easy carry with you, a good assistant for motorcycle decoration. We provide with a 30-DAY MONEY-BACK GUARANTEE and 18-MONTH WARRANTY and lifetime technology support.
Features:
Specs:
Color | White and Amber |
Size | 1.81*0.72 Inch |
11. MaxBeam for 2016+ Honda Civic LED Side Marker Lamps (2016, 2017, 2018) (Smoke (with Turn Signal))
Full LEDBrighter than StockSmoked Black Housing for a custom look1 Year Warranty (directly from seller)
Specs:
Color | Smoke (with turn signal) |
Weight | 0.22 Pounds |
14. DEPO 312-1533R-AS Replacement Passenger Side Parking Light Assembly (This product is an aftermarket product. It is not created or sold by the OE car company)
- The products listed are aftermarket spare parts, and any reference to the names of the auto makers and vehicle models are solely for the purchasers to identify the applicable scope of such spare parts and are in no means used as trademarks
- Compliant to applicable DOT regulations
- Test fitted to ensure proper fitment
Features:
Specs:
Height | 4 Inches |
Length | 12 Inches |
Number of items | 1 |
Weight | 0.9 Pounds |
Width | 6 Inches |
🎓 Reddit experts on automotive turn signal lights
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive turn signal lights are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Yeah I still need to do the interior. When we had one decent week (was in the 60s) before the cold came back, I did a quick sweep and wipe down, but it definitely wasn’t good enough.
I did change out all of the front bulbs (headlights, DRLs, fogs) as well as the side marker covers and bulbs. The front are LED-like halogen bulbs, and the side markers are LEDs. I made a post about the front lights last year. The side markers I bought off of Amazon.
I would recommend going for actual LEDs if you can afford it. The halogens look close to LEDs, are cheaper, and I haven’t had any issues, but the light output isn’t all that great and I can tell there is a slight yellow hue to them despite the blue coating. No complaints with the side markers. They look awesome.
Yes, if you want shiny you could polish stainless bumpers. I was planning on painting mine the wheel color which is a satin gunmetal gray.
The P.O. of my car was a Volvo mechanic and he did the elect fuel pump, which I have since replaced w/ a new one. He also did the headlight relay kit, driveshaft rubber link thing, U joints. He also remove all of the emission garbage and I'm told that makes a huge difference in power felt. It does pull pretty hard. I have the lowering springs, shocks, sway bar bushings, center link, etc. to do and still on my list is control arm bushings and better brakes.
I had an issue where it was running like crap - rough and very rich, all of the sudden and found the issue to be the idle cut-out / shut off solenoid.
If you do decide to remove front bumper and want to fill in the holes, that was a lot of work for me. Welding in the patches wasn't too tough but just all of the profiling / block sanding to get all those radius' to blend nicely took me a long time. The front blinker marker lights I got are for a 1960's Mustang. Their profile isn't a perfect match but close enough where difference isn't noticeable at a glance.
If you want a front spoiler get the one from Vick Auto as it's much better quality than the Mr. Fiat one.
Good luck with your car!
Edit: One thing I would do different is to delete the rectangular side marker lights and go with those tiny 3/4" round ones. That would immediately make the car look 10 years older IMO. Someone also makes a small control board to alternate blinker flash so it would blink front/side/ alternately. Like these:
https://www.amazon.com/Partsam-Marker-Clearance-Light-Signal/dp/B019BT79NG/ref=pd_cp_263_1?pd_rd_w=lJtOh&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=4QPHKT2N5YZDWKWFM78S&pd_rd_r=a3e15943-32b3-11e9-a6c1-83a6775f2fe5&pd_rd_wg=QVoKZ&pd_rd_i=B019BT79NG&psc=1&refRID=4QPHKT2N5YZDWKWFM78S
https://www.amazon.com/gp/product/B074P71SPD/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Not all that 'smoked' but look so much better then those bright orange abominations that are stock. I honestly think it's my favorite thing I've done.
Very nice, it looks great! I know you said you had know mod plans yet but might I suggest something like [this?] (http://www.amazon.com/Wrangler-Right-Signal-Light-Mopar/dp/B00GFTTNNA/ref=sr_1_1?ie=UTF8&qid=1409520023&sr=8-1&keywords=jeep+wrangler+jk+clear+directionals)
It'd be a fairly a fairly cheap upgrade and would look really sharp with the color you've got, I think. Enjoy!
They stopped selling the brand I bought but my friend has these and they are just as good
(FYI the parking lights are halos but the turn signals and emergency flashers are amber)
JK Turn Signal Lights White DRL Amber LED Front Grill Signal Parking Lights Smoke Lens Replace 2007-2017 Jeep Wrangler JK JKU https://www.amazon.com/dp/B07NXZ3RR5/ref=cm_sw_r_cp_api_i_TJlYDbW3Q9N6S
Senkauto Motorcycle Cafe Racer Seat Frame Hoop Loop Tracker End with LED Brake Turn Signal Light For Suzuki Honda Yamaha (210mm Flat) https://www.amazon.com/dp/B075TZQM2B/ref=cm_sw_r_cp_api_-1vYAbFAD8Y3R
Another amazon purchase. Seems to be good quality, and good fit
On the radiator covers cheapies from Amazon.
https://www.amazon.com/dp/B0116I6FB2/ref=cm_sw_r_cp_apap_7irLeoGTCR23o
I drilled holes in the plastic radiator guard and put waterproof LED strips behind for better visibility from the front as well.
Here is a quick idea for how to do it.
First, get a POM bottle :
https://www.packagingdigest.com/sites/default/files/styles/featured_image_750x422/public/297190-POM_single_serve_bottle.JPG?itok=ZQGrcN07
Next, paint the entire top part like a cork (mainly so its opaque).
throw your 2d4 in it
Then install LED light in the top opaque part shining down.
https://www.amazon.com/Meerkatt-Clearance-Indicator-Universal-Waterproof/dp/B07DMDG5SF/ref=sr_1_4?ie=UTF8&qid=1536371697
I've always been interested in these https://www.amazon.com/dp/B01LZA1GC5/ref=cm_sw_r_cp_api_ixeHyb79SQNAV I'm not sure if they are any good or not but it might be worth looking into.
If you want to keep the stock look you can add LED bulbs. I've seen people cut sheet metal in the shape of the turn signal then add these:
https://www.amazon.com/Amber-Custom-Flasher-Signal-Lights/dp/B006VU5GOI
​
You can also do something like this:
https://www.youtube.com/watch?v=yy9WwNRO-uM
You can find it here! on Amazon
So these?:
Driver Side Replacement Turn Signal Corner Light https://www.amazon.com/dp/B006TMLCF0/ref=cm_sw_r_cp_api_O9Xhzb6F58W60
Passenger Side Replacement Turn Signal Corner Light https://www.amazon.com/dp/B006TMLCXW/ref=cm_sw_r_cp_api_A-Xhzb3EC09FJ
They are called corner lights or side markers
these ones
https://www.amazon.com/LinkStyle-Motorcycle-Signal-Strobe-Handlebar/dp/B07BNJH5FY/ref=sr_1_1?keywords=bar+end+light&qid=1567015720&s=gateway&sr=8-1
I don't mind at all. https://www.amazon.com/gp/product/B07BNJH5FY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This is what is causing me problems:
http://www.amazon.com/Depo-312-1533R-AS-Passenger-Replacement-Assembly/dp/B004I0J7M0/ref=cm_cr_pr_product_top
The turn signal works fine, but the DRL on it doesn't work anymore. Any thoughts?