Reddit mentions: The best automotive differential assembly kits
We found 6 Reddit comments discussing the best automotive differential assembly kits. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Gear Aid Aquaseal FD Soft Top Repair Kit for Jeep and Convertible Cars
- Make permanent repairs to Jeep and convertible roofs, soft tops, vinyl windows, roll cage covers, seats and more
- Apply Aquaseal FD adhesive to rips and holes, which dries to a waterproof and highly flexible repair
- Use Tenacious Tape Repair Tape with its ultra-aggressive adhesive that won't peel or lift
- Take this multipurpose kit anywhere; contains Aquaseal FD adhesive, Tenacious Tape patches, sewing tools, brushes and gloves
- Packaging may vary
Features:
Specs:
| Color | Black |
| Height | 7.3 Inches |
| Length | 9.75 Inches |
| Number of items | 1 |
| Release date | August 2018 |
| Size | 7" x 10" |
| Weight | 0.25 Pounds |
| Width | 1 Inches |
2. Yukon Gear & Axle (YC D706008) Differential Carrier Case for Dana 30 Axle
- Yukon replacement standard open carrier case for Dana 30, 3. 73 and up axle ratio, 1. 943" tall
- If purchasing this case for a Dana 30 JK front, you will need to also purchase spider gear set YPKD30-S-27 (ASIN: B0078U9FBK)
- Precision Machined for Tight Tolerances
- Does Not Include Spider Gears
- If purchasing this case for a Dana 30 JK front, you will need to also purchase spider gear set YPKD30-S-27
- FITMENT: Carrier Case; Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in
Features:
Specs:
| Height | 0 Inches |
| Length | 0 Inches |
| Number of items | 1 |
| Weight | 7.5087146830839 Pounds |
| Width | 0 Inches |
3. USA Standard Gear Spartan Locker for ford 8.8 Differential 31 Spline (SL F8.8-31)
- Easy, drop-in installation
- Made from 9310 steel
- Heat treated and precision cut teeth
- Backed by 1 year
- Fits Ford 8. 8 differential with 31 spline axles. The Spartan locker's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap
Features:
Specs:
| Height | 0 Inches |
| Length | 0 Inches |
| Number of items | 1 |
| Release date | January 2015 |
| Size | Ford 8.8 differential - 31 spline axles |
| Weight | 7.24 Pounds |
| Width | 0 Inches |
4. Spartan Locker for Toyota V6 with 30 Spline Count (SL TV6-30)
- Made from 9310 steel for added strength
- Fits Toyota V6 8" Rear Dropout
- Works with stock side gears in standard carrier case
- Fit type: Vehicle Specific
Features:
Specs:
| Height | 3 Inches |
| Length | 12 Inches |
| Number of items | 1 |
| Release date | February 2019 |
| Size | Toyota V6 differential - 30 spline axles |
| Weight | 2.96 Pounds |
| Width | 13 Inches |
5. Dana Spicer 74210X Dana 35 Trac-Loc Limited Slip Differential By Dana Spicer
- 100% Polar Fleece, Warm and Cute, Machine Washable
- Ladies Mens Adult Animal Pajamas
- Fit For: Cosplay Dress Up, Halloween, Christmas, Homewear, Sleepsuit, Present Gift,Party, Performance, Outfit, etc.
- Convenient Onesies: Top Buttons make it easy to take on and off; Pocket Design for carrying your Phone, keys or Wallet; Convenient to the restroom with Rear Zipper
- S fit for height from 150CM-160CM (59"-63"), M fit for height from 160CM-168CM (63"-66"), L fit for height from 168CM-177CM (66"-70"), XL fit for height from 177CM-188CM (70"-74")
Features:
▼ Read Reddit mentions🎓 Reddit experts on automotive differential assembly kits
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive differential assembly kits are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Automotive Replacement Differential Assembly Kits:
Summary
1. Gear Aid Aquaseal FD Soft Top Repair Kit for Jeep and Convertible Cars
- Make permanent repairs to Jeep and convertible roofs, soft tops, vinyl windows, roll cage covers, seats and more
- Apply Aquaseal FD adhesive to rips and holes, which dries to a waterproof and highly flexible repair
- Use Tenacious Tape Repair Tape with its ultra-aggressive adhesive that won't peel or lift
- Take this multipurpose kit anywhere; contains Aquaseal FD adhesive, Tenacious Tape patches, sewing tools, brushes and gloves
- Packaging may vary
Features:
Specs:
| Color | Black |
| Height | 7.3 Inches |
| Length | 9.75 Inches |
| Number of items | 1 |
| Release date | August 2018 |
| Size | 7" x 10" |
| Weight | 0.25 Pounds |
| Width | 1 Inches |
2. Yukon Gear & Axle (YC D706008) Differential Carrier Case for Dana 30 Axle
- Yukon replacement standard open carrier case for Dana 30, 3. 73 and up axle ratio, 1. 943" tall
- If purchasing this case for a Dana 30 JK front, you will need to also purchase spider gear set YPKD30-S-27 (ASIN: B0078U9FBK)
- Precision Machined for Tight Tolerances
- Does Not Include Spider Gears
- If purchasing this case for a Dana 30 JK front, you will need to also purchase spider gear set YPKD30-S-27
- FITMENT: Carrier Case; Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in
Features:
Specs:
| Height | 0 Inches |
| Length | 0 Inches |
| Number of items | 1 |
| Weight | 7.5087146830839 Pounds |
| Width | 0 Inches |
3. USA Standard Gear Spartan Locker for ford 8.8 Differential 31 Spline (SL F8.8-31)
- Easy, drop-in installation
- Made from 9310 steel
- Heat treated and precision cut teeth
- Backed by 1 year
- Fits Ford 8. 8 differential with 31 spline axles. The Spartan locker's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap
Features:
Specs:
| Height | 0 Inches |
| Length | 0 Inches |
| Number of items | 1 |
| Release date | January 2015 |
| Size | Ford 8.8 differential - 31 spline axles |
| Weight | 7.24 Pounds |
| Width | 0 Inches |
4. Spartan Locker for Toyota V6 with 30 Spline Count (SL TV6-30)
- Made from 9310 steel for added strength
- Fits Toyota V6 8" Rear Dropout
- Works with stock side gears in standard carrier case
- Fit type: Vehicle Specific
Features:
Specs:
| Height | 3 Inches |
| Length | 12 Inches |
| Number of items | 1 |
| Release date | February 2019 |
| Size | Toyota V6 differential - 30 spline axles |
| Weight | 2.96 Pounds |
| Width | 13 Inches |
5. Dana Spicer 74210X Dana 35 Trac-Loc Limited Slip Differential By Dana Spicer
- 100% Polar Fleece, Warm and Cute, Machine Washable
- Ladies Mens Adult Animal Pajamas
- Fit For: Cosplay Dress Up, Halloween, Christmas, Homewear, Sleepsuit, Present Gift,Party, Performance, Outfit, etc.
- Convenient Onesies: Top Buttons make it easy to take on and off; Pocket Design for carrying your Phone, keys or Wallet; Convenient to the restroom with Rear Zipper
- S fit for height from 150CM-160CM (59"-63"), M fit for height from 160CM-168CM (63"-66"), L fit for height from 168CM-177CM (66"-70"), XL fit for height from 177CM-188CM (70"-74")
Features:
▼ Read Reddit mentions
I love my Marmot Precips with a lightweight pair of thermal underwear underneath if it's cold. Not super warm, but cheap and layerable and ive done -20c without complaint.
Btw I find the best thing to patch rips in your weather layer is Jeep softtop repair kit.
https://www.amazon.com/Gear-Aid-Aquaseal-Repair-Convertible/dp/B00TJVCPGI
Yeah it's not real obvious since they leave the decimal out, so it's easy to miss, especially if the tag is covered in grime.
The carrier holds the ring gear in place and also houses the spider gears which allow the axle shafts to turn at independent speeds from each other when not traveling in a perfectly straight line. 3.73-up just means it will accept all ratios from 3.73 and higher (4.10, 4.56, 4.88...I think max for our D30 is 5.13?) personally I wouldn't go beyond 4.56; any tire needing 4.88 is going to be very large and just getting a beefier axle is a better idea than trying to over-modify the D30 to accommodate such a size.
https://www.amazon.com/Yukon-YCD706008-Differential-Carrier-Case/dp/B0078UASUM/
The sluggishness is also putting extra strain on the transmission, which will shorten its life since the fluid is running hotter. It will love you for re-gearing. Do a fluid drain and refill (Dexron/Mercon, not ATF) after your re-gear as it's likely lost some of its viscosity and thermal properties.
Is this what you mean? Amazon says it'll fit. I'm certain mine is a 8.8 and 31 spline.
https://www.amazon.com/USA-Standard-Gear-F8-8-31-differential/dp/B007PJ92SU
This is the link to the locker on Amazon. This is an automatic or lunchbox locker if that’s the type you’re looking for. So far I’m stoked. It’s smooth and still does its job really well. Spartan Locker SL TV6-30 Toyota V6 differential-30 Spline axles Lunchbox Lockers https://www.amazon.com/dp/B007PJBFTE/ref=cm_sw_r_cp_api_i_3RYTCbTVC52C4
your going to be looking at a limited slip job then. something like https://www.amazon.com/Dana-Spicer-Trac-Loc-Limited-Differential/dp/B009X1RHQM