Reddit mentions: The best automotive replacement exhaust flanges
We found 7 Reddit comments discussing the best automotive replacement exhaust flanges. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Walker 31880 Exhaust Flange
- Offered in a variety of styles and sizes for your installation needs
- High quality material helps to ensure a leak-free connection
- New Walker accessories help to ensure effective exhaust repairs
- Designed to work seamlessly with Walker aftermarket replacement parts
- Walker supplies all of the accessories you need to do the complete exhaust job
Features:
Specs:
Height | 3 Inches |
Length | 8.3 Inches |
Number of items | 10 |
Release date | December 2013 |
Width | 4.13 Inches |
2. 2" inch Exhaust Flange Flat Oval Split Repair Replacement Khaos Motorsports
- 2" Split Flange
- Solid Steel
- Great For Exhaust Repair!
Features:
Specs:
Height | 0.5 Inches |
Length | 4.88 Inches |
Number of items | 1 |
Width | 4 Inches |
3. Nickson 169 Split Flange 1 3/4-2
- 169
Features:
Specs:
Height | 0.66 Inches |
Length | 4.65 Inches |
Weight | 0.5 Pounds |
Width | 3.91 Inches |
4. Dorman 03408 Exhaust Flange Hardware Kit
- Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Features:
Specs:
Height | 0.1 Inches |
Length | 0.1 Inches |
Weight | 0.01 Pounds |
Width | 0.1 Inches |
5. Nickson 149 Split Flange 2 1/4-2 1/2
- PVP
Features:
Specs:
Height | 0.67 Inches |
Length | 4.21 Inches |
Weight | 0.5 Pounds |
Width | 3.33 Inches |
6. Nickson 177 Split Flange 2-2 1/4
Nickson SPLIT FLANGE 2-2 1/4
Specs:
Height | 0.9 Inches |
Length | 4.4 Inches |
Weight | 1 Pounds |
Width | 3.7 Inches |
7. JEGS Performance Products 30862 Cast Iron Exhaust Cutout w/ Cable
- Cast Iron Exhaust Cutout w/ Cable
- 2-1/2"
Features:
Specs:
Height | 4.7 Inches |
Length | 8.4 Inches |
Weight | 4.31 Pounds |
Width | 8.3 Inches |
🎓 Reddit experts on automotive replacement exhaust flanges
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive replacement exhaust flanges are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
None of the above! I made my own muffler delete for less than $20. I bought a universal Flange and elbow and welded them together and trimmed the outlet side to length (see amazon links for parts below):
Walker 31880 Exhaust Flange
https://www.amazon.com/dp/B0015KWFB6/ref=cm_sw_r_em_apa_i_1ijQDbN7B0DVB
Walker Exhaust 41001 Exhaust Pipe Walker Elbow
https://www.amazon.com/dp/B001P2FPOI/ref=cm_sw_r_em_apa_i_qgjQDbK8CGNAD
This was done on my 2013, although I suspect it would work on the 2018+ also.
I am sure you could do this without a welder using JB Weld or similar cold welding compound. It doesn't look pretty like the aftermarket systems but its also a tiny fraction of the price and you can't see mine anyways; it exits just like the stock one did just on the other side of the car. I was surprised how quiet it is. It can be alittle drony under high load or WOT but very pleasant all other times.
Something like a set of these might actually do it for you. Or two of these. i don't know what size you need measure and order the correct size, but i do know that you are missing the flanges, they probably rotted off. you will also need to reform the shape of joint, it looks like the intermediate pipe hit the ground, hit it with a hammer a few times. and there is a donut gasket
heres what it should like like when you're done
Damn that looks good. Flex joints are what I was hoping for.
How long did it take you to install? It looks like there are a million little pieces to keep track of.
Was cleaning/scraping the block difficult?
And did you have to buy any other parts like Amazon suggests:
https://www.amazon.com/Dorman-03408-Exhaust-Flange-Hardware/dp/B00068PTHK/ref=pd_bxgy_263_img_2/147-7626014-2951415?_encoding=UTF8&psc=1&refRID=NTXVWZ8FM0C442YGJ4D0&dpID=41neLQCv7AL&preST=_SX300_QL70_&dpSrc=detail
I am going to just assume that you bought the new seal, so no need to ask about that.
I went to replace the muffler on my car and the flange on the cat just crumbled away. I used a clamp on flange like this or this.
In a pinch literally, get one of these, bought them for half the price amazon lists.
https://www.amazon.com/Nickson-177-Split-Flange-2-2/dp/B000COY5PK
I'll bet the PO had an exhaust cutout installed. Really only way to know is follow the cable and see where the other end is.