Reddit mentions: The best automotive shock mounting kits
We found 9 Reddit comments discussing the best automotive shock mounting kits. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 8 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Gabriel 143340 Suspension Mount
- Meets or exceeds OEM/OES requirements
- Installation hardware kit included where applicable
- Hardware from Original Equipment Part may need to be reused.
- Installation hardware kit included where applicable
- Fit type: Vehicle Specific
Features:
Specs:
Color | Regular |
Height | 2 Inches |
Length | 4 Inches |
Number of items | 1 |
Release date | June 2013 |
Weight | 0.6 Pounds |
Width | 4 Inches |
2. PAIR Of Strut/Shock Cap Tower/Mount Rust Repair Kit(s) For 1996-2000 Caravan/Town & Country/Voyager (Front Left & Right) (Replaces 5080009AA, 5080008AA)
- Meets Or Exceeds OEM Specs
- Factory OEM Fit Form And Function
Features:
Specs:
Height | 8 Inches |
Length | 12 Inches |
Width | 12 Inches |
3. KYB SM5452 - Mount Kit
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Features:
Specs:
Color | Regular |
Height | 4 Inches |
Length | 4 Inches |
Number of items | 1 |
Weight | 0.220462262 Pounds |
Width | 2 Inches |
4. Dorman 924-207 Strut Tower Repair Cap Kit
Dorman 924-207
Specs:
Color | Black |
Height | 12 Inches |
Length | 11.2 Inches |
Number of items | 1 |
Weight | 3.25 Pounds |
Width | 3.5 Inches |
5. PKS Strut Mount
Features a quick, solid mounting system for mounting any version of GoPro cameraEasy to store and attachStrut mount comes with the standard click-in GoPro base and a leash loop.Does not come with any GoPro click-in connections.Will fit around struts with a circumference of 13in or less.
6. Mounting Kit, Overload, RW67-1D & 2D
- NULL
- NULL
- NULL
- NULL
- NULL
Features:
Specs:
Number of items | 1 |
Weight | 0.000625 Pounds |
7. Genuine Mazda B39D-34-380A Suspension Mounting Rubber
- Genuine OEM product
- Fit type: Vehicle Specific
- Package Weight: 0.022 pounds
- Made in China
Features:
Specs:
Height | 4 Inches |
Length | 5.8 Inches |
Number of items | 1 |
Width | 5.4 Inches |
8. KYB SM5454 - Strut Mount
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Features:
Specs:
Color | Black |
Height | 3 Inches |
Length | 7.88 Inches |
Number of items | 1 |
Weight | 0.220462262 Pounds |
Width | 7.25 Inches |
🎓 Reddit experts on automotive shock mounting kits
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive shock mounting kits are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I put them on all four corners on my 2010, fronts on the middle setting. Ordered this for the rear: https://www.amazon.com/dp/B00DBS4OSC/. Bilstein says just reuse the bushings, but I felt better replacing them due to the age.
I've been happy with them; to be fair, the factory shocks were in bad shape so anything was going to be better. It looks better too. The rears were easy to do myself, the fronts are much tougher so I had a shop do that and the alignment you'll need. Labor installing the shocks was $250, I think.
Only issue I've had is the links on my front sway bar are apparently over-extended and pop now. I've been meaning to look into that.
replacement strut tower tops
If I could afford it I'd try to find a newer Caravan. They're much much better, the 3.6 is an awesome motor and the later vans without leaf springs drive much better.
Well anchored so it doesn't bounce, a SSD (if possible), and you should be OK. Realize all cards and such need to be properly installed and locked in place too.
You could use shock mounts, which can help a bit.
You used to be able to get a 'repair' part that would be riveted over top of the existing strut tower, to provide support.
Apparently it's a common issue and that was the fix early on.
Ya, I think yours is too far gone.
https://www.amazon.ca/Dorman-924-207-Strut-Tower-Repair/dp/B001NYTF6W
Do you have this mount?
https://www.amazon.com/Mounting-Kit-Overload-RW67-1D-2D/dp/B007UU7DUI
If so then rain it down.
Here's a document detailing it:
https://www.schneider-electric.com.au/en/faqs/FA303759/
PKS strut mount
Before that I made my own using velcro and the GoPro wrist mount housing.
Camber arms, if you don’t have any installed already. Depending on the age of your current suspension, you may need new top hats, bearings, and bump stops.
Parts list:
1x HOTTUNING ADJUSTABLE FRONT COILOVERS COILOVER KIT VW CADDY MK2
2x 1J0512131B / 1J0512131B - Rear Shock Absorber Boot
2x KYB 341007 Excel-G Gas Strut
2x KYB SM5454 - Strut Mount
2x BLACK MAGIC COILOVER SPRINGS
COILOVER SPRING,2.5" ID X 12" X 120#
2x BLACK MAGIC SMALL DIAMETER COILOVER SPRINGS
COILOVER SPRING,1.87 ID X 10" X 105#
2x
COILOVER KIT,36MM BILSTEIN