Reddit mentions: The best depth gauges
We found 5 Reddit comments discussing the best depth gauges. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. iGAGING 0-6" DIGITAL MULTI-GAUGE FOR WOODWORKERS AND WELDERS - 3-IN-1 TOOL - DEPTH GAUGE + HEIGHT GAUGE + THICKNESS GAUGE
- 3-In-1 Tool - Depth Gauge, Height Gauge, Thickness Gauge
- Super Large LCD Display; On/Off, Zero Set Functions
Features:
Specs:
Height | 1.5 Inches |
Length | 7.25 Inches |
Size | 6 to 7.9 Inches |
Weight | 0.4 Pounds |
Width | 11.75 Inches |
2. Mitutoyo Digital Depth Micrometer
Calibrated depth micrometer measures 0 to 6.0" (0 to 152.4mm) with 0.00005" (0.001mm) resolution, for measuring depths of holes and other depressionsLCD screen displays in inches and metric unitsRatchet stop to help provide uniform pressure for precise, repeatable measurements, and measuring rod cla...
3. KEGOUU Contour Gauge 10 Inch Profile Gauge Measure Ruler Contour Duplicator for Precise Measurement Tiling Laminate Wood Marking Tool
【Precise Shape Duplication】This contour gauge works well in copying the shape of any irregular items, replicate the shape of moldings or match cut outs, exactly for woodworking or tile flooring/linoleum installation/winding pipes/circular frames/ducts and so on.【Multi-Scene Application】 The ...
Specs:
Color | Green |
Size | 10 inch |
4. Starrett 827A Edge Finders, Single End, 0.375" Body Diameter, 0.2" Contact Diameter
Body and contacts are made of tool steelHardened, ground and lapped to close tolerancesFurnished with a protective caseItem Package Dimension: 4.0" L x 2.0" W x 1.0" H
Specs:
Height | 0.9842519675 Inches |
Length | 4.2913385783 Inches |
Number of items | 1 |
Size | 0.375" Body Diameter, 0.2" Contact Diameter |
Weight | 0.10802650838 Pounds |
Width | 1.4960629906 Inches |
5. Starrett 257A Full-Sized Surface Gauge with Hardened Steel Base, 9" Spindle Length, Base 2-7/8" Length and 2-3/8" Width
Scribes lines to 9” (225 mm) spindle height, with 6” scriber lengthHardened, ground, and lapped steel base for stability and a smooth, flat surfaceFour frictionally held gauge pins for versatile tool referencingSliding snug with a knurled, ring-type lock nut for adjustment ease and secure positi...
Specs:
Number of items | 1 |
Size | 9" Spindle Length, Base: 2-7/8" Length, 2-3/8" Width |
Weight | 2.4 Pounds |
🎓 Reddit experts on depth gauges
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where depth gauges are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
this thing is awesome for depth measurements for router bits, blades, etc. costs $20 and doesn't care which blade/bit i use.
https://smile.amazon.com/iGAGING-DIGITAL-MULTI-GAUGE-WOODWORKERS-WELDERS/dp/B0032OG42O/ref=sr_1_5?ie=UTF8&qid=1464796402&sr=8-5&keywords=depth+gauge
There have been improvements
https://www.amazon.com/Mitutoyo-Digital-Depth-Micrometer/dp/B00WNCW25E
Edge finder.. for finding edges of material when using an endmill.
Starrett 827A Edge Finders, Single End, 0.375" Body Diameter, 0.2" Contact Diameter
edge finder
Here: KEGOUU Contour Gauge 10 Inch Profile Gauge Measure Ruler Contour Duplicator for Precise Measurement Tiling Laminate Wood Marking Tool https://www.amazon.com/dp/B07XFZ51DL/ref=cm_sw_r_cp_api_i_FjVVDbB6A901F
No problem, just waiting out the snow here in Detroit.
Basically you put the indicator in a mag base or a surface gauge. See attached.
Starrett 257A Full-Sized Surface Gauge with Hardened Steel Base, 9" Spindle Length, Base 2-7/8" Length and 2-3/8" Width https://www.amazon.com/dp/B000KUA2AS/ref=cm_sw_r_cp_api_TH4FAbJK43FJE
Tools mounted in solid holders with set screws are not adjustable. Using a single angle or double angle collets you can tap cutting tool into .0000 runout.
If you think about it, a small cutter say .03 diameter running out .002 is nearly 10% of the entire diameter. That’s like a half inch tool running out .05. At a low rpm it would be practically waiving at you lol
They make machines to check the runout but many shops don’t have them.