Reddit mentions: The best door handle sets
We found 14 Reddit comments discussing the best door handle sets. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 12 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Callan KN3001 Newport Series Grade 3 Keyed Entry Lever & Single Cylinder Deadbolt Set44; Satin Nickel
- Combination Screws that Suit both Wood or Metal Door Mounting.
- 200,000 Cycle Count.
- Keyed Alike for Convenience.
- Item Weight - 3.1 lbs.Specifications
Features:
Specs:
Color | Satin Nickel |
Number of items | 1 |
Weight | 3.1 Pounds |
2. Bulk Hardware BH02239 Front Fix D Handle with Screws, 100mm (4 inch) - Chrome Plated
- D-handle with screws
- Front fix handle
- Fixes to front of door and drawer
- Available in a chrome plated finish
- The length of the back fix 'D' handle is 100 mm
Features:
Specs:
Color | Chrome Plated |
Height | 0.78739999919685 Inches |
Length | 3.740149996185 Inches |
Release date | September 2014 |
Weight | 0.06834330122 Pounds |
Width | 0.39369999959843 Inches |
3. Modern & Contemporary Double-Sided Ladder Style Push-Pull Stainless Door Handle (16 inches/406mm) for Steel, Aluminum and Glass Doors, Brushed Stainless Steel Finish (16 inch, Satin Stainless Steel)
Contemporary / Modern ladder style door handle. (16inch)Works for wooden/light steel/glass doors up to 2.4" thickness, for interior and exterior use.One set comes as a pair of door pulls for inside and outside of a single door. Mounting accessories included.Finishes: Beautiful hairline stainless sat...
Specs:
Color | Satin Stainless Steel |
Height | 5 Inches |
Length | 16 Inches |
Size | 16 Inch |
Weight | 1.8 Pounds |
Width | 1 Inches |
4. Kwikset 96870-100 Belleview Single Cylinder Handleset with Cove Knob featuring SmartKey Security in Venetian Bronze
- Traditional arch single cylinder deadbolt and matching handleset with a traditional cove interior knob
- Designer style and superior security with this Kwikset signature series product
- For use on exterior doors where keyed entry and security is needed
- Handleset deadbolt is ANSI/BHMA Grade 3 certified, the highest residential security rating
- Features SmartKey Security: Re-key your lock in 3 easy steps; Compatible with Kwikset KW1 Keyway
- SmartKey Security re-key technology is compatible with Kwikset (KW1) keyway
Features:
Specs:
Color | Venetian Bronze |
Height | 0.004 inches |
Length | 8.12 inches |
Number of items | 1 |
Weight | 2.5 pounds |
Width | 5.5 inches |
5. Toledo Fine Locks Segovia Satin Nickel Lever Handleset
For use on doors with a thickness of 1-3/8 in. to 1-3/4 in.Lever set features universal, right and left hand functionsSatin nickel finishDesigned with an anti-bump key cylinder systemANSI grade 3
Specs:
Color | Satin Nickel |
6. Schlage FE285 716 LAT CEN Lower Half Handleset, Aged Bronze - FE285 CEN 716 LAT CEN
- IDEAL USE: Perfect for use on entry doors where additional security and curb appeal are needed; secure your door by pairing with a smart lock or mechanical deadbolt in complementary styles; deadbolt sold separately
- CERTIFIED HIGHEST DURABILITY: Premium metal construction and quality craftsmanship for everyday strength and peace of mind; AAA certified BHMA rating for Security, Durability and Finish
- EASY INSTALLATION: Replace an existing front door handle yourself with no skill required; self-aligning screw holes make installation easy and hassle-free; install in minutes with only a screwdriver
- HASSLE-FREE FIT: Universal latch slides easily into place without tools to fit standard doors with 2-3/8" or 2-3/4" backset; fits door thickness 1-3/8" to 1-7/8"; adjustable throughbolt slides for easy installation without drilling additional holes
- UNIVERSAL HANDING: Works with right and left handed doors
- TRUSTED WARRANTY: Schlage locks are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty; see Schlage warranty for full details
Features:
Specs:
Color | Aged Bronze |
Height | 12.13 Inches |
Length | 2.25 Inches |
Number of items | 1 |
Release date | June 2022 |
Size | Century Interior Trim |
Weight | 3 Pounds |
Width | 2.5 Inches |
7. BQLZR Euro Profile Cylinder Barrel 5 Pin Lock Brass Satin Nickel Finish 65mm with 7 Keys
Each item with our own product labelCylinder5 hardened pin lock for standard security.
8. Franklin Standard Door Silver Double Cylinder Deadbolt Lock with Two (2) Keys
Specs:
Color | Silver |
Height | 6.63 Inches |
Length | 5.25 Inches |
Weight | 1.12 Pounds |
Width | 2.5 Inches |
9. STB Sliding Glass Patio Door Handle Set with Mortise Lock, White, Non-Keyed, 3-15/16" Screw Holes | The Latch Lever is Located Off-Center
- Patio Door Handle with Mortise Lock Kit
- The latch lever is located off-center
- INCLUDES – The patio door handle set comes with matching inside and outside white diecast handles that fit on door thicknesses that range from 1-1/4” to 2-1/2” thick. Mounting hole centers are 3-15/16”.
- NON-HANDED CONSTRUCTION – The sliding door handles can be used on either right- or left-handed doors by reversing the handle on the mounting plate.Latch Style:Hook Style
Features:
Specs:
Color | White |
Height | 50 Centimeters |
Length | 100 Centimeters |
Weight | 100 Kilograms |
Width | 100 Centimeters |
10. Marks Hardware 91A-RH Mortise Lock, Right Hand
- Marks Mortise Lock, Right Hand
- Marks Hardware Inc
- Marks Hardware Inc. 91A-Rh
Features:
Specs:
Color | Polished Brass |
Height | 4.25 Inches |
Length | 11 Inches |
Number of items | 1 |
Size | Right Hand |
Weight | 4.35 Pounds |
Width | 5 Inches |
11. Schlage F92-CEN Century Dummy Exterior Handleset from The F-Series, Satin Nickel
Country of Origin: ChinaThe Package Height of the Product is 9.144 centimetresThe Package Length of the Product is 41.402 centimetresThe Package Width of the Product is 20.066 centimetres
Specs:
Color | Satin Nickel |
Height | 4 Inches |
Length | 17 Inches |
Number of items | 1 |
Size | Inactive Handleset Exterior_Century |
Weight | 3 Pounds |
Width | 8 Inches |
12. Sliding Glass Patio Door Handle Set with Mortise Lock, White, Keyed, 3-15/16 Screw Holes by TechnologyLK
Finish: WhitePatio Door Handle Set with Mortise Lock KitFits Sash Controls; Stamped 2265Thumbturn in the "B" (offset) positionCenter-to-Center Holes: 3-15/16 inch
Specs:
Color | White |
Height | 50 Centimeters |
Length | 100 Centimeters |
Weight | 100 Kilograms |
Width | 100 Centimeters |
🎓 Reddit experts on door handle sets
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where door handle sets are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I didn't even think of that as I have not ran into one (to my knowledge at least) in any of the other dozen or so locks that I have picked. I will do a little more reading about security pins and tinker with it tomorrow some more. I do not have a picture, but I can have you one tomorrow as well when I get back at it if that will help. Here is what lock I believe they are though. Thank you, again. https://www.amazon.com/gp/aw/d/B000Y4B5EM/ref=mp_s_a_1_1?ie=UTF8&qid=1518565553&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=callan+deadbolt&psc=1
Commercial product? Kind of.
Get someone to drill holes and screw on a handle like this one:
https://www.amazon.com/AmazonBasics-Modern-Cabinet-Polished-10-Pack/dp/B01MYAGI09/ref=sr_1_9?keywords=4%22+chrome+handle&qid=1556738563&s=gateway&sr=8-9
Or this one if reverse access isn't possible (less pretty):
https://www.amazon.com/Bulk-Hardware-BH02239-Handle-Screws/dp/B00O7P0XAQ/ref=sr_1_1?keywords=4%22+front-screw+chrome+handle&qid=1556738803&s=gateway&sr=8-1
You'd probably need to go to Home Depot and buy the perfect length screws in either case.
Then you'll have a screw hole and screw visible on the other side of the door? I would instead recommend OP to get something like this that are better fit for this door. You won't see the screw and you get the handle on both sides of that door
https://www.amazon.com/Contemporary-Double-Sided-Push-Pull-Stainless-Aluminum/dp/B01DWOAU3M
You can have a locksmith re-key the lock, or you can buy something like this. With the latter option, it comes with regular keys and a sliver of metal that you can use to change it over to your old key. It's pretty easy to do.
got it, thanks for the tip about same key series.
https://www.amazon.com/dp/B00FQ558XI
does this look like i'm on the right track?
would major hardware stores like home depot
already stock matching key series lock sets,
or even there they would all be random to each other.
It's a strongly rated lock ... And good to have a backup
Also
https://www.amazon.com/Schlage-FE285-716-LAT-CEN/dp/B00YSQ73BQ/ref=pd_aw_sim_421_2?_encoding=UTF8&pd_rd_i=B00YSQ73BQ&pd_rd_r=a2740a5c-e307-11e8-b46f-b71e0fbb93aa&pd_rd_w=3XYKx&pd_rd_wg=vebFi&pf_rd_i=mobile-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=57b46099-d750-4d74-83ee-63ad64b310a4&pf_rd_r=8B8DXW2V1SAY0FSHA71V&pf_rd_s=mobile-dp-sims&pf_rd_t=40701&psc=1&refRID=8B8DXW2V1SAY0FSHA71V
i'm into picking all types of locks so i listed some basics here. good starting points for further exploration and learning. tool making and/or additional future purchases required for some of these, but that's the name of the game:
tubular lock
sidebar lock
slider lock
dimple lock
double-sided wafer lock
disc detainer
lever lock
There are lots of handle/lock sets at Home Depot that are the right size to cover that opening. Why don't they work?
https://www.amazon.com/Sliding-Glass-Handle-Mortise-Non-Keyed/dp/B009KP460G
Even if that particular lock won't work, you can use the handles, and get a lock that is like a pin.
http://www.ocdiberoamerica.com/you-will-like-this-sliding-glass-door-latch-design/burglar-bars-for-sliding-glass-doors-sliding-glass-door-latch-sliding-patio-door-security-best-way-to-secure-a-sliding-glass-door/
I have had one of those as the sole lock on my sliding door for about 17 years.
I'm in the states for a few weeks right now, so I can't share a photo of the deadbolt (but it does give me the chance to buy a US device if it's viable). But the key operates a rounded bolt that extends from inside of the door itself. It is wholly separate from the door handle (which does not have a key), such that you need to use the door handle to open the door, the deadbolt only locks/unlocks the door.
It looks almost identical to the one in the photo found here
I don't know if you can get parts. When a lock component snapped on one of ours (our house is 100 years old) we resorted to purchasing a compatibly-sized reproduction. I found one on amazon (https://www.amazon.com/Marks-Hardware-91A-RH-Mortise-Right/dp/B005N184G8) that looks like it might work for you, but we got ours at a repro hardware specialty store.
> Pair with a Schlage F94 Inactive Handleset Interior for a complete lockset
The above is quoted from OP'S Schlage F92-CEN... dummy set link.
You want a door you can manually unlock from the outside?! Think about it...........and there it is. No they don't exist, nobody in their right mind would put one of those on an exterior door...BUT, they do make a style with a key lock that would work for what you need. Find you one of those that suits your style and keep them kitties locked in!