Reddit mentions: The best esd supplies for labs
We found 32 Reddit comments discussing the best esd supplies for labs. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 18 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. CML Supply Anti-Static Wrist Strap Grounding Cord with Adjustable Band
- Dissipates static during electronic repair and maintenance
- Wrist band adjusts to varying sizes
- Self-coiling grounding cord grants freedom to move and freedom from tangles
- Integrated 1-meg resistor for safe disspation of static charges
- Genuine CML Supply Brand provides great quality at an economical price
Features:
Specs:
Color | Multicolor |
Weight | 0.1 Pounds |
Size | One Size |
2. Velleman AS9 Anti-Static Field Service Kit (Red) - Portable anti-static work surface - 24"x24"
Mat dimensions: 23.62" x 23.62". Thickness: 0.37 mmSurface resistance: ± 108 - 1010 Ω/sqVolume resistance: < 1010 Ω/cmRTT (point to point): ± 108 - 1010 ΩTemperature resistance: max. 70 °C (not resistant to soldering)
Specs:
Color | RED |
Height | 3 Inches |
Length | 12 Inches |
Weight | 0.55 Pounds |
Width | 3 Inches |
Size | 24" X 24" |
Number of items | 1 |
3. kingsmart Anti Static ESD Wrist Strap Discharge Band Grounding
- Package Contains One Item
Features:
4. Bertech ESD Mat Kit (Made in USA), 18 Inches Wide x 24 Inches Long x 0.094 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant
- BLUE ESD TABLE MAT SPECS: Mat is 18 inches wide x 24 inches long x 0.094 inches thick. Comes with an ESD Anti-Static Wrist Strap and ESD Anti-Static Ground Cord. Mat already has a snap and is ready to be used out of the box with minimal assembly.
- HIGH QUALITY ESD ANTI-STATIC MATERIAL: Made of a blue color single layer homogenous polymer mix with ESD Anti-Static properties for various worksurfaces and tables.
- ESD ANTI-STATIC SPECS: Surface Resistivity (10e9 - 10e10 ohms); Thickness (0.094"); Tensile Strength (900 lbs./in. sq.); Service Temperature (-20 degrees F to 160 degrees F); RoHS Compliant.
- ESD APPLICATIONS: Aerospace Assembly, Mobile Phone and Computer Repairs, Computer Technicians, Electronic Assembly, Fiber Optics Manufacturing, Hospitals, Server Setup, Electronics Manufacturing and Solar Industries.
- CHEMICAL RESISTANT: Resistant to degradation by organic/inorganic acids, reducing agents, detergent solutions, and alcohols.
Features:
Specs:
Color | Blue |
Size | 18" Wide x 24" Long x 0.094" Thick |
Number of items | 1 |
5. Vastar ESD Anti-Static Wrist Strap Components, Blue
【Industrial-grade Wrist Strap】High safety, strong electrical conductivity can effectively make static electricity flow away.【Adjustable Wrist Strap Buckle】 These wrist straps can be adjusted freely for your wrist comfortably.【Extra-long Coiled Cord】 Line length 1.9M, full of flexible,it ...
Specs:
Color | Blue |
Height | 0.2 Inches |
Length | 6.3 Inches |
Weight | 0.02 Pounds |
Width | 4 Inches |
Number of items | 1 |
6. Conductive Anti-Static Foam 24"x12"
- Package Dimensions: 27.94 cms (L) x 36.068 cms (W) x 27.94 cms (H)
- Product Type: Precision Measuring
- Package Quantity: 1
- Country Of Origin: Taiwan
Features:
Specs:
Weight | 0.11625 Pounds |
Number of items | 1 |
7. Bertech ESD Mat Kit (Made in USA), 18 Inches Wide x 30 Inches Long x 0.094 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant
- STRONG WORKSTATION PAD: Designed for electronic assembly, this grounding mat offers excellent resistance to oil, grease, most common solvents, hot solders, and soldering irons; comes with a wrist strap, alligator clip, and ground cord
- DURABLE MATERIAL: Made from vinyl and a single-layered homogeneous polymer mix with ESD properties; conductive layer supports the static dissipative top layer that creates outstanding electrical performance characteristics
- MULTI-PURPOSE: For use in aerospace assembly, computer operators, computer technicians, electronic assembly, fiber optics manufacturing, hospitals, and solar industries
- SPECIFICATIONS: Mat is 0.094 inches thick, 18 inches wide, and 30 inches long with a service temperature of -20°F to 160°F; surface resistivity is 10e9 to 10e10 ohms
- SAFETY COMES FIRST: Bertech is a leading source of Electrostatic Discharge Products (ESD), Kapton Tapes, and Finger Cots; we also produce customized kits to meet our customers' specific requirements
Features:
Specs:
Color | Blue |
Size | 18" Wide x 30" Long x 0.094" Thick |
Number of items | 1 |
8. Mechanix Wear: M-Pact Leather Work Gloves (Medium, Brown/Black) (LMP-75-009)
- Abrasion Resistance: Durahide Leather Technology protects your palm with abrasion resistance
- Impact Protection: Thermoplastic Rubber (TPR) knuckle guard and metacarpal Impact Protection meet EN 13594 impact standard and provides pinch-point fingertip protection.
- Absorbs Vibration: Multi-zone D3O palm padding absorbs and dissipates high-impact energy through the palm.
- Breathable: Form-fitting TrekDry material provides evaporative cooling and helps keep hands cool and comfortable while you work.
- Secure Fit: Thermoplastic Rubber (TPR) creates a Secure Fit.
- Machine Washable: We recommend washing our Durahide leather gloves with household laundry detergent and warm water, and air drying to maintain long-term performance.
Features:
Specs:
Color | Black/Brown |
Height | 1 Inches |
Length | 12 Inches |
Weight | 0.35 Pounds |
Width | 5 Inches |
Size | Medium |
Number of items | 1 |
9. StaticTek Banana Jack Outlet Plug Adapter | Universal Ground 3 Prong Outlet Earth Connection | ESD Control | Black Light Weight Unbreakable Plastic | 1 Piece | STI - DES - 09838
MATERIAL: StaticTek plug prongs are made of unbreakable plastic. Ideal for earth connections to any static dissipative or conductive objects. Because of the plastic material, It is lightweight and easy to carry anywhere.EASY TO USE: Providing stability in connection and it will not accidentally disc...
Specs:
Color | Black |
Height | 1.2 Inches |
Length | 2 Inches |
Weight | 0.04375 Pounds |
Width | 1 Inches |
Number of items | 1 |
10. Velleman AS4 Anti-Static Mat with Ground Cable - Desktop static dissipative mat - 11.8" x 22"
PVC-latex material - thickness: 2 mm (white layer: 0.2mm, black layer: 1.8 mm)Surface resistivity: 10E9 - 10E11 Ohm/m2Charge decay: < 0.03 sTemperature resistance: max. 100°C (not resistant to soldering)Easy to clean and maintain
Specs:
Height | 12.204724397 Inches |
Length | 2.362204722 Inches |
Weight | 0.220462262 Pounds |
Width | 2.362204722 Inches |
Size | Small |
Number of items | 1 |
11. Memphis Glove Medium Black Ninja ICE FC 7 Gauge Acrylic Terry Lined General Purpose Cold Weather Gloves With Knit Wrist, 15 Gauge Nylon Shell And HPT Foam Sponge Fully Coated
- Cold Weather Gloves
- Manufacturer: Memphis Gloves
- Made in: United States
- Black
Features:
Specs:
Color | Black |
Height | 9.8 Inches |
Length | 4.6 Inches |
Weight | 0.3 Pounds |
Width | 1.8 Inches |
Size | Medium (Pack of 1) |
Number of items | 1 |
12. YUCHENGTECH Ionizing Air Snake Electrostatic Eliminator ESD Anti Static Ionizer Automatic Induction Electricity Universal Serpentine(110V)
- 1.【Automatic induction】▣ When the object appears within 300mm in front of the ionizing air snake, the nozzle can automatically blow out strong ion wind.
- 2.【Advantage】▣ Compared with ionizing air gun,when using,it don’t need to control by hand , more convenient to use.
- 3.【Serpentine tube design】▣ The direction of the serpentine tube can be changed at will to point it at the target,quick to remove static electricity.
- 4.【Air flow adjustable】▣ By rotating the brass knob besides the air inlet to adjust the air flow. The product need to be used with air compressor (8mm air inlet).Compressed air pressure: 5-70/psi(recommended).
- 5.【Applicability】▣ The static eliminator is more suitable for eliminating static on photographic film,plastic cases,electronics manufacturing,vinyl products,professional printer,etc.
Features:
Specs:
Height | 12 Inches |
Length | 9 Inches |
Weight | 1.10231131 Pounds |
Width | 8 Inches |
Size | 110V |
Number of items | 1 |
13. uxcell 5 Pcs 1.5 x 0.5cm Black Plastic Round Handle Anti Static ESD Brush
- Product Name : Anti Static Brush;Brush Size : 1.5 x 0.5cm / 0.6" x 0.2"(L * W)
- Total Size : 14.5 x 1.5 x 0.6cm / 5.7" x 0.6" x 0.2"(L * W * T);Material : Plastic, Conductive Fibers
- Color : Black
- Weight : 61g
- Package Content : 5 x Anti Static Brush
Features:
Specs:
Color | Black |
Height | 0.24 Inches |
Length | 5.8 Inches |
Width | 0.6 Inches |
14. DESCO Reztore 10415 Topical Antistat, 1 Quart Spray Capacity
- Low charging, antistatic; keeps triboelectric charges well below 200 volts per EIA 625
- Long lasting hard coat formula; protection that lasts three times as long as the other leading brands
- Static dissipative; provides a safe path to ground
- Non-toxic, safe to use; RTT: 10E6 ohms per ANIS/ESD S4.1
- Removes contaminating particulate: Eliminates possible ESD event
Features:
Specs:
Weight | 3 Pounds |
Release date | March 2017 |
Number of items | 1 |
15. HDE Cordless Wireless Adjustable Anti-Static ESD Electrostatic Discharge Wrist Band Strap
- Hand Held Meat Tenderizer: Reduces cooking time by up to 40% and provides pathway for marinades to be absorbed deeper into the meat and increasing absorption by up to 600%. It is ideal for both professional chefs and home cooking enthusiasts.
- Commercial Meat Tenderizer: The meat tenderizer has double sided razor-sharp stainless-steel knives that effortlessly cut through the connective tissue in meat that can cause it to be tough.
- Steak Tenderizer, Meat Tenderizer: Achieve better cooking results from less expensive cuts of meat with Jaccard multi-blade hand-held meat tenderizer.
- 45 Blade Meat Tenderizer: Enhances any type of meat, including but not limited to beef, pork, veal, chicken, venison and fowl; Incredible results on boneless chicken breasts including even cooking, and retention of natural juices and flavors.
Features:
16. Techni-Stat Bag Moisture Barrier ESD 6" X 8" 100/Pk
- For dry packaging of electronic devices
- Replaces costly nylon/foil laminates
- Static safe dissipative inner and outer surfaces
- Ideal for packaging SMD's in trays, shipping tubes, and reels
- 6" X 8"
Features:
Specs:
Weight | 2 Pounds |
17. TRIXES Anti-Static Wristband Wrist Strap Band ESD Discharge. Prevents Build Up of Static Electricity
- ANTI-STATIC- Prevents the build-up of static electricity in dry environments
- MAXIMUM PROTECTION- 36 degree conductive contact
- ADJUSTABLE SIZE- Comfortable wrist strap that can be adjusted to size
- ALLIGATER CLIP- Wrap the strap around your wrist and attach the alligator clip to a grounded source
- PREVENT ELECTRONIC BUILD UP- Ideal when repairing PCS or working with other sensitive electronic
Features:
Specs:
Weight | 0.05732018812 Pounds |
18. ESD Anti-Static Wrist Strap Components, SourceTon 4 Packs Anti-Static Wrist Straps Equipped with Grounding Wire and Alligator Clip, Grounding Solution for Working on Sensitive Electronic Devices
ESD PROTECTION -Ground yourself while working on sensitive electronic devices for protecting the devices from Electro-StaticWIDE RANGE OF MOVEMENT - Extra-long coiled cord makes sure you are able to do the wide range movement.FLEXIBLE STRAP - The flexible strap makes sure it can fit your wrist perfe...
🎓 Reddit experts on esd supplies for labs
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where esd supplies for labs are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
It is a good idea in general to open things up and clean them if you spill stuff into them. However, I would look up some youtube videos of people working on your particular model. I haven't opened a MacBook in years, but some laptops can be a real pain. You'll want to make sure you have the right tools and a backup computer in case things go south and you have to take it in somewhere. Definitely back up your data if you can.
As far ESD stuff, you can buy a wrist strap and mat on Amazon for about $25.
http://www.amazon.com/Velleman-AS9-Anti-Static-Field-Service/dp/B004XZQ30Y
Plug the mat into the third prong of a grounded outlet. Then set the laptop on the mat and put on the wrist strap. After you open the laptop, be sure to touch an exposed metal screw in there or the metal case before starting work. This will ensure the laptop is at ground potential. When you pull the motherboard or any components from the laptop, set them on the mat.
You can clean the laptop with isopropyl alcohol and or distilled water. Alcohol is nice because it dries fast. Just get in there with some q-tips and start scrubbing. Of course, not too hard. The tiny surface mount components can come off if you press too hard or if they're corroded. Just make sure that if something does break loose, you know exactly where it came from. One good trick for gently cleaning big messes is to dump a good bit of alcohol on the board, then spray it off with a can of air. Just be careful to keep from getting any microphones or speakers wet. It's also not good to leave a board wet for too long. They can warp.
A magnetic screw driver set helps out a lot.
I got this one
An ESD mat
and wrist strap are strongly recommended, though not required. There are other ways to ensure that you're grounded.
Thermal paste Along with some >90% alcohol to clean off the old thermal paste if needed.
And lots of patience. I assembled and disassembled my PC multiple times until I was happy with my cable management.
Thanks to everyone for your help. Build successful.
I'm not the greatest at cable management but I'm pleased that I was able to put it together. Had a minor issue with screen not being detected, but I swapped the RAM around different slots and removed CMOS battery, then restarted the machine. It works! :)
https://1drv.ms/f/s!AvpXpL3BxCWHotlpnjWy10V7h6VPSw
Tools I utilized:
https://www.youtube.com/watch?v=0bUghCx9iso
https://www.amazon.com/dp/B01DM0E7BM/
Well normally the pins are inserted into a square cut out of lightweight foam that provides some cushioning. I'm not sure if the foam is a special type of anti-static foam though.
The best thing would be to find one of the hard-shell plastic cases that CPU's come in (or a similar plastic case), as the foam is probably not critical, whereas you really want to have that tight-fitting case.
EDIT: Apparently you can get anti-static foam:
http://www.amazon.com/FOAM-CONDUCTIVE-ANTI-STATIC-INCH-x12/dp/B00B88717I
Here is the plastic case:
http://www.amazon.com/Computer-CPU-Packaging-ClamShell-Container/dp/B00I61322S/ref=sr_1_cc_2?s=aps&amp;ie=UTF8&amp;qid=1414333035&amp;sr=1-2-catcorr&amp;keywords=cpu+clamshell
It claims "100% perfect fit, no need to add ESD foam"
I've built 5 PCs without a wrist strap, but some people swear by them, and they're definitely the safest option. Your best bet would be an online retailer. They are super-cheap (generally <$5, and here's one for <$2), but look kind of silly imo.
I usually just slip the board back into the ESD bag it came in before storing it. If you managed to buy a board without an ESD bag, you can pick some up pretty cheaply on Amazon.
Other than that, I've not taken much precaution while working with dev boards (though I do refuse to hand a board directly to someone else if we're not both grounded--I always set it on a table and make them pick it up) and, in 16 years, I've never damaged one with ESD. However, I consider myself lucky. If you live someplace especially dry or you seem to be especially static-prone or you're working with boards that you absolutely cannot afford to fry, then you might buy an ESD mat and grounding strap to use when handling your boards. Here's an option from Amazon (first search result, you might look around a bit before purchasing): https://www.amazon.com/Bertech-Wrist-Strap-Grounding-0-093/dp/B00O0Q03KM
For storage though, an ESD bag should be more than sufficient.
Do more expensive ESD bands mean more protection over a cheaper one or are they all the same? How much does a $1 ESD wrist wrap vary from a $5 band or even a $85 strap? Will the $5 wrap have added protection than the $1 band or is $85 the best choice? I have never purchased a ESD band so I don't know what to get. Thanks!
I use the Mechanix M-pact framer gloves. They have great knuckle protection, D3o palm padding, phenomenal grip and I like the fact that they have cut off fingers for better brake feel.
&#x200B;
They make the same glove in a full finger model too.
Yeah, when you think about it, there is no need to plug something into the main outlet if you are discharging, even if you only want ground. When working on old electronics of unknown status, never leave it to chance. Also, the outlet ground should be confirmed to connect to true earth ground.
But anyway here's a safer device than attaching the wall plate screw: https://www.amazon.com/StaticTek-Adapter-Universal-Connection-Unbreakable/dp/B071J61CSV
The first one assumes you'll attach a grounding wire to it (you'll see rolls of this stuff for covering spaces of different sizes, add your own ground). The second one includes it.
This on Amazon check out Bertech, though I just saw this one and it looks like a neat starter, especially if you're in the field.
https://www.amazon.com/gp/aw/d/B004XZQ30Y/ref=mp_s_a_1_2?ie=UTF8&amp;qid=1481109514&amp;sr=8-2&amp;pi=SX200_QL40&amp;keywords=esd+mat&amp;dpPl=1&amp;dpID=41ns6LQRGbL&amp;ref=plSrch
Yes, it is a real risk! But prevention is easy, just keep touching the case or any other metallic object every few minutes (with very high-end components I get OCD and do it every 2-3 mins).
I also just bought a strap along with the rest of the parts for my rig two weeks ago and it worked just fine: At ~$4 it isn't bad at all!
you can constantly wear a grounding strap like this
https://www.amazon.ca/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
But i build PC's all the time and I have never used a grounding strap. Whats more important is to make sure you don't produce statics. Don't wear socks and run over carpet for example. You can always ground yourself by touching, for example, a heat radiator or the grounding part in an electrical outled.
They sell anti-static mats, like this. That being said putting the motherboard on the box that it came in to install the CPU is fine. The GPU can go on top of its box and everything else can either be left in its packaging or on the desk/table until you need it. Just don't put it on the floor.
So what I would do is get a piece of magnetic imaging film [1] and survey the desk area for fields. Besides that I would introduce an insulator, for any development board I work on, I have used those green craft boards [2] which are seem to be great insulators. You might also try using a wrist connected grounding strap [3]. If there are any electrical posts built into the table, unplug them, and inspect the insulators and neutral & ground runs.
[1] https://www.amazon.com/Magnetic-Viewing-Film-Field-Display/dp/B00129CCGS
[2] https://www.amazon.com/Hobby-Craft-Double-Healing-Cutting/dp/B00GEKIM8W
[3] https://www.amazon.com/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
I recommend these for the winter. It'd be a little tough to do muscle ups with them due to the extra grip provided but your hands and fingers will feel like summer.
Get an antistatic wrist strap from amazon.
US: http://www.amazon.com/Static-Wrist-Strap-Discharge-Grounding/dp/B00530GDHG/ref=sr_1_3?ie=UTF8&amp;qid=1409079935&amp;sr=8-3&amp;keywords=antistatic+wrist+strap
UK: http://www.amazon.co.uk/Anti-Static-Wrist-Strap-Grounding-Discharge/dp/B004XBBYSY/ref=sr_1_1?ie=UTF8&amp;qid=1409079970&amp;sr=8-1&amp;keywords=antistatic+wrist+strap
Then watch this: https://www.youtube.com/watch?v=QB5a3mSElSw
Ground yourself on the case before touching anything, don't work on a carpeted floor, and if you want to be particularly cautious, get a grounding strap like:
https://www.amazon.com/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
These are what I bought:
http://www.amazon.com/gp/product/B008LTXYXW
http://www.amazon.com/gp/product/B00880BAJE
http://www.amazon.com/gp/product/B00880B9TA
The first one is really a must-have for cleaning heatsinks, since the bristles are long.
This stuff??
http://www.amazon.com/Desco-Reztore-Topical-Antistat-Capacity/dp/B005BTA7XU/ref=sr_1_1?ie=UTF8&amp;qid=1333896030&amp;sr=8-1
[Found them on Amazon] (https://www.amazon.com/Mechanix-M-Pact-Coyote-Impact-Protection/dp/B007ZFNDAC/ref=sr_1_16?ie=UTF8&amp;qid=1510103692&amp;sr=8-16&amp;keywords=mechanix+mpact+gloves)
[Found similar ones on Amazon] (https://www.amazon.com/Mechanix-Wear-Leather-M-Pact-Gloves/dp/B01EOWA180/ref=sr_1_7?ie=UTF8&amp;qid=1510103692&amp;sr=8-7&amp;keywords=mechanix+mpact+gloves)
[Ebay] (https://www.ebay.com/itm/MECHANIX-M-PACT-MENS-GLOVES-WEAR-MILITARY-AIRSOFT-TACTICAL-HUNTING/152653779588?var=452180682582&amp;epid=1212359226&amp;hash=item238adfd284:g:KTEAAOSwOAZZiE5-)
[Ebay again] (https://www.ebay.com/itm/Mechanix-Wear-Mpact-Gloves-Brand-New-with-Free-Shipping/162167169538?var=461140304386&amp;hash=item25c1eaa202:g:L5QAAOSwU-pXrfCN)
Do you have other ISPs in the area? I might try switching providers. The only other option I can think of is this thing electrostatic eliminator
I guess this probably works but why not just wear a grounding strap?
https://www.amazon.com/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
Get an anti-static ground strap.
wear a grounding strap when installing parts
Or the wireless anti-static grounding wristband.
You could try this as a collar: http://www.amazon.com/HDE-Adjustable-Anti-Static-Grounding-Electronic/dp/B002IXYR1U :P
It's called a cordless ESD strap!
Yes. There are devices made specifically for this used in electronics manufacturing all the time. Generally it'll be a wrist strap (or foot strap) that is conductive and plugs into a ground to discharge static continuously, but if you just want to avoid getting shocked you simply need to move the point of discharge away from your body. Holding onto a conductive (non-grounded) object like a steel rod and touching that rod to a conductive, grounded surface will discharge the static but you shouldn't feel anything since the discharge is between the two conductive surfaces and not your skin and something else.
It stands for Moisture Barrier Bags.
You will look insane but you can use one of these you wear the bracelet and attach the lead to a ground source. People use them for working on electronics where the discharge could cause damage.
To answer your question, I've built almost every PC on carpet, with socks on, while getting struck by lightning. I've NEVER had a problem.
Here's why I'm an idiot, it only takes one time to have a really bad day. It's worth the small price for :
https://www.amazon.com/Anti-Static-Components-SourceTon-Grounding-Electronic/dp/B07BXS5TFT/ref=asc_df_B07BXS5TFT/?tag=hyprod-20&amp;linkCode=df0&amp;hvadid=241979032071&amp;hvpos=1o3&amp;hvnetw=g&amp;hvrand=13666845083850025298&amp;hvpone=&amp;hvptwo=&amp;hvqmt=&amp;hvdev=c&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9060263&amp;hvtargid=pla-443206801190&amp;psc=1
ESD wrist straps are usually something like a megohm to ground so that there is enough of the path to discharge any static buildup, but not enough current to kill you should something go wrong. If you work on live equipment and have a short to ground on one arm and touch something with the other, the current path goes straight across your chest. Here, $1.73 for a strap If you want to make one you need 1 megohm resistor to put between your body and the ground.
Wiki