Reddit mentions: The best occupational health & safety products
We found 677 Reddit comments discussing the best occupational health & safety products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 326 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 3M Scotchlite Silver Reflective Tape, 2 in x 36 in, 1 Roll
- Tape may be used wherever low light or night-time light reflectivity is needed to increase visibility
- Versatile tape works on a variety of SURFACES on automobiles, trailers, driveways, mailboxes, RVs, watercraft and bicycles
- When you shine light this tape, the light reflects back toward the source of the light, immediately alerting people to objects up ahead
- Pressure-sensitive adhesive adheres to clean, smooth surfaces such as metal, glass, smooth wood or painted surfaces
- WEATHERABLE Adhesive bonds well in exterior applications
Features:
Specs:
Color | Silver |
Height | 22 Inches |
Length | 5.75 Inches |
Number of items | 1 |
Release date | October 2011 |
Size | 2 in. x 36 in. |
Weight | 0.8 ounces |
Width | 4 Inches |
2. Racers Tape Surface Guard Tape (1" X 30') (Clear)
Formerly referred to as helicopter blade/leading edge wing tape, ISC Helicopter-OG Surface Guard Tape is an extremely durable and conformable polyurethane tape.It has an 8-mil thick polyurethane backing which is highly effective at protecting paint from abrasion, erosion, tearing and punctures. This...
Specs:
Color | Transparent |
Height | 1 Inches |
Length | 4.25 Inches |
Number of items | 1 |
Size | 1 inches X 30 \ |
Weight | 0.26 Pounds |
Width | 4.25 Inches |
3. Biohazard Specimen Bags Ziploc 8x10 25/pkg
- Biohazard Specimen Bags
- 25 Pack
- 8"x10"
Features:
Specs:
Color | Orange |
Number of items | 25 |
4. PHARMEX 1-78G Permanent Paper Label,"for Rectal USE", 1 9/16" x 3/8", Blue (500 per Roll, 2 Rolls per Box)
- Pharmex Warning Labels help ensure quality patient care through the prevention of medication errors
- Route of Administration Labels
- Label Reads: for rectal use ONLY
- Item Package Weight: 1.0 lb
Features:
Specs:
Color | Blue |
Number of items | 1000 |
Size | Original Version |
5. Rubbermaid Commercial Structural Foam Stock Tank, 50 Gallon Capacity, Black (Fg424300Bla)
- Seamless construction for outstanding durability
- Five sizes to fit all your watering needs; from 50 gallons up to 300 gallons
- Optional all-plastic anti-siphon float valve provides constant water level
- Measures 51-2/3" x 31" x 12", Made in the USA
Features:
Specs:
Color | Black |
Height | 12.08 Inches |
Length | 63.25 Inches |
Number of items | 1 |
Size | 50 Gallon |
Weight | 0.23 Pounds |
Width | 69 Inches |
6. Blue Emesis Bags, Disposable Vomit Bags, 1000ml (24 Pack)
CONVENIENT AND EASY TO USE: This barf bag has a big opening rim that fits perfectly in the mouth area to prevent spillage when used. It is also very easy to wrap up and dispose after vomiting.SECURE AND SEALED: With its closure system - twist, and secure bag into a notched ring that helps to seal an...
Specs:
Color | Blue |
Height | 3 Inches |
Length | 5 Inches |
Number of items | 24 |
Size | 24 Pack |
Weight | 0.25 Pounds |
Width | 3 Inches |
7. GQ GMC300EPlus Fulfill Digital Nuclear Radiation Detector Monitor Meter
- Newer GMC300EPlus Fulfill of gmc-300 series geiger counter for nuclear radiation
- Text, graphic and large font mode provide visualized radiation changes
- Usb connection for both communication and data communication
- Package weight of the Product: 6 Ounces
Features:
Specs:
Color | white |
Height | 1 Inches |
Length | 5 Inches |
Number of items | 1 |
Release date | July 2018 |
Size | pocket size |
Weight | 0.375 Pounds |
Width | 2.8 Inches |
8. Cyalume ChemLight Military Grade Chemical Light Sticks – 12 Hour Duration Light Sticks Provide Intense Light, Ideal as Emergency or Safety Lights, for Tactical Applications, Hiking or Camping and Much More, Standard Issue for U.S. Military Personnel – Yellow, 6” Long (Pack of 10)
- INTENSE LIGHT OUTPUT FOR UP TO 12 HOURS means you can get the job done when electric light isn’t an option. The patented, long-lasting formulations in our ChemLight chemical light sticks provide up to 12 hours of 360 degree illumination. The bright yellow color can be seen from up to a mile away.
- OFFICIAL CHEMICAL LIGHT OF THE U.S. MILITARY – ChemLight military grade light sticks are standard issue for all military personnel, so you know there’s no better alternative available.
- VARIETY OF USES – Whether you’re using these chemical light sticks for tactical applications, as part of your emergency kit, for hiking, camping or even just for your children to play with , you can be sure they will provide just the right amount of light necessary. .
- WATER-PROOF, NON-FLAMMABLE, NON-TOXIC CHEMISTRY means ChemLight light sticks are as safe as they are durable – you can even let your children use them when hiking or playing in the backyard. Also ideal for confined space, underwater and tactical applications.
Features:
Specs:
Color | Yellow |
Height | 1.6929133841 Inches |
Length | 9.4881889667 Inches |
Number of items | 10 |
Size | 10 |
Weight | 0.551155655 Pounds |
Width | 4.0944881848 Inches |
9. FastCap Long Nosed Marker, Black
- Long thin tip has a diameter of 1/16
- Black, permanent, waterproof marker
- 1-1/8
- Reach tight spots with ease
Features:
Specs:
Color | Black |
Height | 0.6 Inches |
Length | 9 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.000625 Pounds |
Width | 2 Inches |
10. CML Supply Anti-Static Wrist Strap Grounding Cord with Adjustable Band
- Dissipates static during electronic repair and maintenance
- Wrist band adjusts to varying sizes
- Self-coiling grounding cord grants freedom to move and freedom from tangles
- Integrated 1-meg resistor for safe disspation of static charges
- Genuine CML Supply Brand provides great quality at an economical price
Features:
Specs:
Color | Multicolor |
Size | One Size |
Weight | 0.1 Pounds |
11. No Soliciting Sign for Home and Business | Stylish Laser Cut Oval 5" X 4" Heavy Duty Sintra PVC | Outdoor Indoor, Use with Door Knockers and Bell (Sintra PVC Plastic)
- Premium Quality- Made of PVC and will never change color. It is different from competitors' printing on some black inks, which will fade in one or two years.
- Easy Installation - You can stick it above or beside the doorbell, on the front door, or on the wall using either double sided adhesive foam tape or screw into the surface. It has pre-drilled holes for quick installation
- Laser Print - The font of our no soliciting sign is laser engraved, very beautiful, and will never fade, it is different from competitors in ink printing and more importantly it will last longer.
- Best For Home And Business Premises - At a height of 5"x 4", this no soliciting sign is ideal for your office or home door. The striking black and white design is sure to draw the attention of trespassers!
- Modern High Contrast Design - Unlike any other signs, this one is made for a more decent and residential look that will not ruin your property’s or house’s exterior.
Features:
Specs:
Color | Black |
Height | 0.00393700787 Inches |
Length | 4.9999999949 Inches |
Size | 5Hx4W |
Weight | 0.07 Pounds |
Width | 3.99999999592 Inches |
12. TapeCase TC790 Dry Vinyl Tape - 1 in. x 100 ft. Black Chrome Plating Tape Roll with High Conformability. Adhesive Tapes
Adhesion Tape: this plating masking tape is a stabilized product that has been manufactured using plasticized polyvinyl chloride filmUsage: when wrapped spirally, this bonding tape will adhere firmly on the surface. Ensuring flexibility and conformability, the tape is well-suited for heavy-duty chro...
Specs:
Color | Black |
Height | 1 Inches |
Length | 2.7 Inches |
Number of items | 1 |
Weight | 0.0661386786 Pounds |
Width | 3.2 Inches |
13. 3M Scotchlite Reflective Tape, 03459, 2 in x 36 in
- Tape may be used wherever low light or night-time light reflectivity is needed to increase visibility
- Versatile tape works on a variety of SURFACES on automobiles, trailers, driveways, mailboxes, RVs, watercraft and bicycles
- When you shine light this tape, the light reflects back toward the source of the light, immediately alerting people to objects up ahead
- Pressure-sensitive adhesive adheres to clean, smooth surfaces such as metal, glass, smooth wood or painted surfaces
- WEATHERABLE Adhesive bonds well in exterior applications
- Use tape to alert drivers about stationary objects such as fences, posts, walls, rails, mailboxes and poles
- Reflective tape is also good to apply to clothing, bikes and helmets used in low light conditions
- Conformability allows for use on most contoured and curved surfaces
- Visibility/identification tape for enhanced nighttime reflective brightness
- Apply and obtain adhesion at any temperature above 50°F/10°C
- Scotchlite
- 2" x 36"
- Red Reflective Safety Tape
Features:
Specs:
Color | Red |
Height | 0.23 Inches |
Length | 0.28 Inches |
Number of items | 1 |
Release date | October 2011 |
Size | 2 in. x 36 in. |
Width | 0.27 Inches |
14. GCA-07W Professional Digital Geiger Counter - Radiation Monitor - with External Wand - NRC Certification Ready- 0.001 mR/hr Resolution - 1000 mR/hr Range
- HANDHELD PERSONAL NUCLEAR RADIATION DETECTOR. Fast, Accurate and Easy To Use. Detects a broad spectrum nuclear radiation, including low energy background radiation and radiation emitted from Naturally Occuring Radioactive Materials (NORM). Suitable for regulatory inspections. USA Tech Support. Assembled in the USA.
- NRC CERTIFICATION READY – Our NRC certification is available at additional cost from the manufacturer.
- AMERICAN MADE GM TUBE: Detector Sensitivity LND712: Detects Alpha particles above 3 MeV in energy. Beta radiation above 50 KeV; X-Ray and Gamma radiation above 7 KeV.
- COUNTING RESOLUTION AND RANGE: 1 Count Per Minute (CPM) - 10,000 Counts Per Second (CPS).
- RADIATION RESOLUTION AND RANGE: 0.001 mR/hr resolution / 1,000 mR/hr Range (Imperial measurements); 0.01 uSv/hr resolution - 10 mSv/hr range (Metric)
Features:
Specs:
Height | 1.2 Inches |
Length | 7.5 Inches |
Number of items | 1 |
Width | 4.1 Inches |
15. EDEC Non-Window Cell Phone Faraday Bag - Signal Blocking, Anti-Tracking, Anti-Spying, 5G RF EMF Radiation Protection for Cell Phones, Key Fobs and Credit Cards
- Forensic faraday bag designed for personal privacy, law enforcement, digital forensics, and military applications
- Standard size bag: Block GPS, cell signals, satellite, Wifi, 5G, and bluetooth frequencies
- Proprietary ISOTech faraday fabric provides the highest signal shielding in the industry
- External Dimensions: 8" x 8.5" Usage Dimensions: 4.25'' x 7.5'' -- Fits all modern smart phones (iPhone6+, Galaxy S6 Edge+, etc.)
- Made in the USA
Features:
Specs:
Color | Cell Phone Non-Window |
Height | 10 Inches |
Length | 10 Inches |
Size | Cell Phone |
Width | 1 Inches |
16. Motorcycle Reflective Safety Tape - Black Adhesive. RTK-03A
Blends with Black Surfaces During the Day, Bright White Reflection at NightThe reflective tape kit includes the following:24 inches of 1" wide Black Reflective Tape +24 inches of 2" wide Black Reflective Tape +12 inches of 4" wide Black Reflective Tape
Specs:
Color | Black |
17. UST Reflective Cut to Size Tape (8 pack)
- Blister packs contains (8) 2" x 4" self-adhesive sheets
- Reflects light so you can be more easily seen
- Can be found faster by search lights
- Flexible material
- Works wet or dry
Features:
Specs:
Color | Silver |
Height | 4 Inches |
Length | 2 Inches |
Size | One Size |
Weight | 0.01 Pounds |
Width | 0.01 Inches |
18. 3M 3430 White Micro Prismatic Sheeting Reflective Tape - 0.25 in. X 15 ft. Non Metalized Adhesive Tape Roll. Safety Tape
Adhesive Tape: this safety reflective tape is designed to surpass reflectivity within the engineer-grade class. It increases the visibility of baby strollers, bikes, and bike accessories, camping/outdoor equipment, pet collars/leashes, automotive, etc.Usage: reflective tape is designed for creating ...
Specs:
Color | White |
Number of items | 1 |
Release date | April 2021 |
Size | 0.25 " x 5 yd |
19. Cyalume ChemLight Military Grade Chemical Light Sticks – 8 Hour Duration Light Sticks Provide Intense Light, Ideal as Emergency or Safety Lights, for Tactical Applications, Hiking or Camping and Much More, Standard Issue for U.S. Military Personnel – White, 6” Long (Pack of 10) (9-51460)
- INTENSE LIGHT OUTPUT FOR UP TO 8 HOURS means you can get the job done when electric light isn’t an option. The patented, long-lasting formulations in our ChemLight chemical light sticks provide up to 8 hours of 360 degree illumination. The bright white color can be seen from up to a mile away.
- OFFICIAL CHEMICAL LIGHT OF THE U.S. MILITARY – ChemLight military grade light sticks are standard issue for all military personnel, so you know there’s no better alternative available.
- VARIETY OF USES – Whether you’re using these chemical light sticks for tactical applications, as part of your emergency kit, for hiking, camping or even just for your children to play with , you can be sure they will provide just the right amount of light necessary.
- WATER-PROOF, NON-FLAMMABLE, NON-TOXIC CHEMISTRY means ChemLight light sticks are as safe as they are durable – you can even let your children use them when hiking or playing in the backyard. Also ideal for confined space, underwater and tactical applications.
Features:
Specs:
Color | White |
Number of items | 10 |
Size | 10 |
20. Eagle 1601MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 30 gallon Capacity, 28.5" Height, 21.25" Diameter
- Lab pack drum comes with a plastic lid and can be used to store, transport, and dispose of small, intact containers of hazardous materials and help contain spills
- Made of blue HDPE, which weighs less than steel, is resistant to dents, punctures, and certain chemicals, and may be incinerated
- Metal lever-lock ring can be used to secure the lid to the drum
- Has 30-gallon storage capacity; weighs 15 lb.; measures approximately 28-1/2" high and 21-1/4" in diameter
- Meets DOT regulation 173.12 and UN standards concerning the packaging and shipping of hazardous materials
Features:
Specs:
Color | Blue |
Height | 28.5 Inches |
Length | 21.25 Inches |
Number of items | 1 |
Size | 28.5" Height, 21.25" Diameter |
Weight | 14 Pounds |
Width | 21.25 Inches |
🎓 Reddit experts on occupational health & safety products
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where occupational health & safety products are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Dude you've got to get some of these glowsticks:
https://www.amazon.com/gp/aw/d/B0052ZAPXU/ref=sxts_1?ie=UTF8&qid=1539370493&sr=1&pi=AC_SX236_SY340_QL65
They're brighter than any glowstick I've ever seen and glow for 12 hrs without dimming. They've been my obsession recently. Highly recommend ordering some thin paracord to make the ultimate party necklace/poi/source of happiness for each of your friends.
Other suggestions for your get-together:
My friends and I like to move all the furniture out of the middle of the living room to create open floor space for dancing and sprawling out on the ground. Make a huge pile of blankets and pillows in the middle of the room and set the speakers up right in front of it!
We also love to get variety packs of different craft beers and try them while rolling! Things taste so different you may be surprised!
Obviously water is very important. It can be very nice to squeeze a lemon or lime into your ice water for a refreshing zing. Really perks you up!
15 people is a large group, so there's a good chance you'll have people in different moods/states of mind. It may be a good idea to set up 2 or 3 different rooms with different lighting, music, vibes so if anyone isn't feeling where they're at, they can move elsewhere.
Fruit is always a great idea. Just make sure to cut it up beforehand so you aren't dealing with knives while impaired lol.
Cigarettes and or vapes if you guys use nicotine. The smoking area is always a popular spot to hang out during a roll party!
Vicks vapor rub is also great to rub on each other's faces/necks while rolling so a little jar of that would be awesome.
Shes' gonna need a wig
And a good set of goggles
someone needs to wear these maybe even her...
You should decorate the lab with this
These would be great to fill with candy as party favors
.... or ....
TEST TUBE BUBBLES!!!! These things are touchable bubbles. PRO TIP: USe ONLY OUTSIDE. Shit makes a mess on the carpet. Easy to vacuum... but still...
Crazy cookie cutters which are perfect for this!
Temporary tattoos
Atomic super balls would be fun too!
A jello brain mold
Biohazard bags for party favors maybe
A geyser aka mentos/coke mixer for kids. That looks fun enough to get for myself. lol
Gravity goo something I would also play with. lol
Insta-snow seems like a good experiment for kids
I should stop now. I used to love planning my kids parties when they were little. Damn them for growing up.
What a cool theme! I hope your daughter has a brilliant birthday party.
You could serve individual different flavours of jelly (jello in the US, right?!) is these petri dishes.
You could use these specimen bags as party bags! These touchable bubbles come in test tubes and are pretty fun!
These molecule model kits were always good fun in science at school - maybe you could incorporate this into a party game? Or else make a few molecules and have them as table decorations!
Thank you for this contest! If I win, surprise me! I hope the party planning goes well.
Used a long marker, and angled it in maybe 20 degrees. Traced everything, then used a utility knife with a fresh blade and cut straight down. Peeled the majority of the material back with my fingers, Kaizen foam has layers you can peel back, but it won't come out in that layer perfectly clean. Test fit everything, cut away more where needed, in small increments because I wanted it super clean looking. Once I got the outline exactly how I wanted it, took a dremel with an abrasive stone head, and pointed it straight down and used it to clean up the lumpy, messy, bottom. Even punching straight down to remove material (especially for the magazine slots this was necessary) it was very effective. Just had to be careful with it, and it worked like a charm! Cleaned up the corners with some careful exacto knife work.
FastCap Long Nosed Pattern Marker https://www.amazon.com/dp/B002NQPEE6/ref=cm_sw_r_cp_apa_i_5k.1Db4YZ6WX8
(I didn't use this set, just using this link to show what I mean by abrasive stone head, I used a cylinder for the flat top, to flatten)
Oudtinx 100 pcs Abrasive Stone Points Electric Grinding Dremel Accessories Polishing Grinding Head Wheel Tool Kit For Dremel Rotary Tool (Red) https://www.amazon.com/dp/B07FN7G7JK/ref=cm_sw_r_cp_apa_i_Vn.1DbBJJHE0A
I'm not sure how much advice you need, so I'll give you a round-up since it sounds like you aren't too familiar with your redfoot yet - forgive me if I'm overstepping here. (Number one question, are you sure it's a redfoot?)
Ours is only about 6 inches long/4.5 inches wide and, since we keep her in an apartment for now, she lives inside one of these stock tubs:
https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Capacity/dp/B000NPBLAU/ref=pd_sbs_86_1?_encoding=UTF8&psc=1&refRID=V0HHMQZ2AWZY19SQXZY2
Depending on just how big yours is, it wouldn't be the worst idea to stick with the kiddie pool indoors - but if it were me, depending on her size, I would try to get a second pool, cut some of the walls out, and try to make one big/long pool. If she's as big as I envision, the ideal situation would be that she gets at least half of a small bedroom. ;)
She'll need some flooring/substrate in there, and you'll want to have some UV lamps and a heat lamp suspended above his home (there is some good advice about these three elements on this page: http://tortoiseyard.com/creating_a_home_for_your_redfoot_tortoise.htm). You might need to construct something out of wood or metal to hang these lights from. If there's a reptile store anywhere near you you might give them a call or visit to see if they have any suggestions, too.
She's also going to need a soaking/drinking dish. She should be able to climb in and out of the dish pretty easily, and it should be deep enough to soak in without having to submerge her face or strain her neck. Keep the water pretty clean cause she'll drink out of it too (ours likes to poop in the water so keep an eye out for that). Soaking is very important!
They also really like moderately high humidity (being a tropical/subtropical tortoise), so I have a reptile fogger (a glorified humidifier) that pipes in steam to the tank. Too much or too little is problematic, but if the air in your home is dry this is definitely a must-have, and you can figure out what's best as you go.
Do you have feeding under control? Stay away from pellet food unless you're really desperate and go for diet as described here (http://redfoottortoise.com/redfoot_tortoise_diet.htm) and here (http://tortoiseyard.com/diet.htm). Try to keep uneaten food out of the cage lest you attract bugs. Get him some cuttlebones (just search it on Amazon) and leave it in his cage - replace it when you see it has been eaten!
Oh maaan, well Shambs was actually my first ever... everything. First rave, first festival, first trip, first time experiencing EDM. My friends took me under their wing (they have a tradition of spoiling a newbie every year) so I mostly followed them around. Dirtmonkey was memorable AF, I danced around and put for rectal use only stickers on everybody's totem that was there. Pigeon Hole's sunday night set was awesome (despite them being a fill-in). Boogie T was unreal, we just sat at the front of the Pagoda and let PK fuck us up haha. Neon Steve was super rad cause I got to go on stage, BTSM was one of the few artists I was familiar with PRIOR to shams, and honestly I discovered Rezz and fell in love with her! I'm lowkey bummed I missed Dimond Saints and Whipped Cream tho. Overall, 12/10 experience. Changed my life. I will absolutely be there next time with much much much more appreciation for the artists now that I'm more familiar with them and loving the music.
Great start! Feel free to x-post to /r/bugout, as they'll have some more suggestions. Here are my thoughts:
Colored safety glasses as party favors!
I loved the "touchable" test tube bubbles when I was a kid, perfect for your theme!
Plastic magnifying glasses
Atomic Super Balls!
Eyeball rings
Microscope center piece.
Brain pencil toppers
If you have time to make cookies!
If you have time to make jello
You can use these bio-hazard bags as goodie-bags! :)
I tried to look for everything in packs of 12 or more, so hopefully these help you! :)
item
I purchased Shred Lights for my v1 board and I don't like them. They're tough to remove/clip on, touching them instantly covers your fingers with road grime, and they don't light up enough of the pavement to safely ride at full speed. Remembering to remove them to charge and remembering to remount them again after charging is also bothersome.
When I ride at night, I wear a headlamp around my thigh and a red LED reflective belt around my waist. Light and Motion makes the highest quality lights I've ever used and their customer support is fantastic. I definitely recommend the Solite 250 EX. The reflective LED belt I linked to isn't special, but it does the job of making you visible from behind.
Because the headlamp is elevated off the ground by a few feet, it doesn't cast long shadows like board-mounted headlights do. It can also be angled so that it lights up the ground some distance in front of the board so that riding at full speed is safe. A headlamp around your thigh also allows the light to move left and right when you turn, allowing you to see your way around corners. While it may feel goofy to wear at first, a thigh-mounted headlamp works extremely well on a Boosted Board.
I also cover the side of the deck with reflective tape so that I'm a little more visible from the side. This reflective tape is perfectly sized for the job.
I agree that the reflectors are a great idea. Here is some awesome reflective tape! you could put anywhere on your bike! The wheels or pedals are great spots because they are moving and will catch a drivers attention super fast. I agree that headlamps make for an excellent light! Wal-mart sells pretty good ones for $5. I recommend people in the market for one to get the small one that has ONE led and uses a small battery as opposed to multiple LED's and bigger batteries because that extra weight is very annoying on your forehead, but if it's a small one and light, it's very comfortable
Better than road flares - Spend the $10 and get a box of ChemLights (http://www.amazon.com/Cyalume-ChemLight-Military-Chemical-Duration/dp/B0052ZAPXU).
Tie a piece of string through the loop on a few of them (but don't crack them). In case of an emergency like in the article, you can crack the light to activate it and spin it in a circle (called a NATO Buzzsaw) that is VERY VERY obvious to see from a distance. It will make people stop their car well in advance. You can use other ChemLights to block off the lane the way road flares are used. If you have a passenger(s) to perform NATO Buzzsaws, it will be much safer for you to help someone that got in an accident or needs help changing a tire.
https://www.youtube.com/watch?v=mYpYv-yDQ_0
Everyone should be certified in CPR if they can; it's not as difficult as it sounds. It's ~$80 for the first 2-year certification through the American Heart Association (much cheaper than through the Red Cross) and then I believe $40 for renewals after that. The importance of CPR is not to save someone on your own, but to keep someone alive long enough for EMTs/emergency physicians to arrive.
I'd also recommend blankets in your trunk, and a first aid kit with gauze wraps in place of band-aids, preferably compression bandages. A Tourniquet is great if you know how to use it but be careful, some states have laws against using them.
Complete bill of materials (£250 though some you may have already, like camera and 20v power supply):
​
Flyback transformer, 35kV, (£8)
ZVS Oscilator to drive flyback (£8) (both come as a pack here)
https://www.amazon.co.uk/FTVOGUE-flyback-generator-Jacobladder-ignition/dp/B07NZ4XM2H/ref=sr_1_32?keywords=flyback&qid=1561950997&s=gateway&sr=8-32
​
X-Ray phosphor screen (£20)
(Terbium-doped gadolinium oxysulfide (Gd2O2S:Tb) scintillator pixels which are embedded into a polyethylene substrate. Normal price £400)
https://www.ebay.co.uk/itm/AGFA-HD-MAMORAY-X-ray-Imaging-Cassette-Screen/222626977966
​
X-Ray source - 2X2A USA MULTI OFFER 5 PIECES (£15)
https://www.ebay.co.uk/itm/2X2A-USA-MULTI-OFFER-5-PIECES-NOS-TUBE-VALVE-HALF-WAVE-RECTIFIER/113786775508?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
​
Geiger counter (£80)
https://www.amazon.co.uk/gp/product/B00IN8TJYY/ref
​
A digital camera with a long exposure ability. (£100)
​
A tripod (or table) for the camera. (£30)
​
And a power supply - DON'T GO OVER 20 volts - the flyback WILL pop.
It will draw around .6 amps if working correctly.
​
You NEED AT LEAST 500 µSv (Microsieverts) per hour - this will produce a glow on the screen BARELY visible in complete darkness.
https://www.youtube.com/watch?v=OoC7_Xz6mu8
​
WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!
The X-Rays mostly come out from INSIDE the "dome" on the top of the vacuum tube, in the shape very similar to a half opened umbrella. Not much comes out the top - they're VERY soft X-Rays at 25kV, so VERY HARMFUL TO ORGANIC stuff because your body WILL absorb MOST of the X-Rays.
​
THIS ENTIRE PROJECT IS DANGEROUS:
It will kill you from the 30,000 volt power source.
It will give you cancer from the X-Rays (ionising radiation tears DNA apart).
It can give you ionising radiation burns in the short term (ionising radiation tears cells apart).
It can damage DNA in your family jewels, producing deformed babies/sterility.
​
If you don't have a Geiger counter and lead shielding, as well as high voltage experience, you're best bet is learn about radiation and HV and do little experiments weeks before you try something like this. If you don't know what the "one hand rule" is, or what ionising radiation does, it's best to stay well clear!
​
​
Hard X-Rays mostly pass through your body, but you'll need a voltage of 75kV for that.
I have had MOST success with the following (NOT SHOWN: the results.)
​
Canon 7D Mk 2, ISO 5000, F1.8, 20 second exposure using the 50mm £50 prime lens AT FULLY OPEN APERTURE.
Pre focus it on the screen using some newspaper or something laying ON the phosphor sheet to focus on.
Turn on "Manual focusing", set up the camera to those settings, turn off all the lights HIDE all your LED's in the room, they WILL light up the screen. (I left an orange power LED on and my screen looks pink!)
​
Turn on the X-Ray machine! Press the shutter, exit the room. Run back in and turn off X-Rays.
​
BOOM! Picture.
​
X-Rays make CUMULATIVE DNA damage - all the doses are added together even days apart, so be careful!
​
Here's two exposures UNEDITED - in Photoshop the noise can be reduced, and the green phosphor turned to blue, like the standard X-Ray sheets.
https://imgur.com/a/tQ4VV7v
​
The X-Ray sheets online are black and clear - and the plastic sheet they're on is tinted blue because back then they thought the blue increased contrast to the eye - it doesn't.
​
If you turn the image black and white, fiddle with the contrast, and then colorise the image to Cyan..... you'll get the same X-Ray result!
​
The sheets from X-Ray cassettes are AWESOME. Plastic phosphor layer, and a BLACK back layer - the light you see isn't leaking from the blue light of the tube, it's only from the phosphor lighting from X-Rays.
​
(I used a paper card version for those first images, so they didn't benefit from this contrast increase)
​
Good luck!
You could spend $25 on a trash can and maybe $5-10 on stuff trying to get it to seal.
Or you could spend $55 on an HDPE drum with the seal built in.
I'd look up what your can is made out of, reference this to see if it is safe. Also what temps it can hold. I like HDPE because I can dump hot liquid in it without worry.
But really, sealing isn't that necessary. Keep bugs out, but that's really it. No oxidation concerns. More on infections later.
As far as heat, I wouldn't worry. Many of the esters and phenols created from hot fermentation will be cut out with your early heads. It's really not a big issue. But 70-80f would be great for whiskey, and and I wouldn't expect it to get any higher even with the thermal mass of 20-25 gallons.
And sanitation... Well. I don't really worry too much. I spray my fermenter down with water and store it open, upside down. No sanitizer, not really necessary. But if you really want, spraying starsan should be fine. Mild infections are good for complexity though, so a lot of people skip it.
I did recently get a bit of mold when I stored it incorrectly and had some liquid... Whoops. Luckily HDPE can be bleached.
It's very simple. Get something like this and then this for the smaller stripe.
You could do it without a clear coat but the clear coat will make it more resistant to pealing/chipping/more permanent. If you do decide to do a clear coat it's not coming off unless you sand the clear coat and your paint off.
Most helmets/bikes come like this from the factory with their vinyl stickers etc placed on and then just clear coated over.
Great list! Adding QOL/bling improvements to games is definitely one of my favorite aspects of the hobby.
Some of my personal favorite add-ons:
If local laws permit, the 319 bridge over the river looks like a safer bet than the 153 due to its much wider shoulder. I didn't see any signs on the onramp prohibiting bikes on the highway, but check with the Department of Highways (or whatever its called in Tennessee) to be sure.
I suggest picking up front and rear lights ($25-30 should get you a basic set), and some sort of high visibility vest (like this or this). If you're riding after dark, some reflective tape on the bike would make you stand out in headlights.
Good luck, and stay safe.
That's what I use with my fish tank and it holds up just fine! Just stain the wood so it is resistant to water and makes it look nice.
That is pretty expensive for a grow bed. For less than half the price, you can get a 50gal Rubbermaid and I highly recommend these. They are very sturdy; I use a 100gal tank for my fish. The 50gal would be perfect as grow beds! I hope this helps and PM me if you have anymore questions!
https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Capacity/dp/B000NPBLAU/ref=pd_cp_86_4?_encoding=UTF8&pd_rd_i=B000NPBLAU&pd_rd_r=44Z6EA7S35DBH8QY2BAX&pd_rd_w=P69qT&pd_rd_wg=4Gx0M&psc=1&refRID=44Z6EA7S35DBH8QY2BAX
Meet in a "Publicly accessible private place".
An example would be to book a hotel room in a hotel with at least 4 floors and more than 50+ rooms. Check into the room as normal and tell the other party, preferably in a secure manor like an encrypted e-mail, the room number. That other party can go directly to your room and meet you there. You now have control over who goes into the room and what happens in there.
You can sweep the room prior to the other party arriving for surveillance devices if you wish with devices like this & this and when they arrive you can have them put any mobile devices into a faraday bag.
Depending upon the back pack you can add some reflective tape to it help you been seen. 3M sells some pretty inexpensive reflective tape that I used on my riding back pack. This stuff sticks to pretty much anything and you don't need a ton of it for it to be very effective. I made a diamond shape on the center of my back pack then flanked it with some strips of tape. I also added a strip on the top of the straps by my shoulders.
We're bike brothers! I have the exact same bike. :)
Just a note, the paint will scuff around the areas where the black cable routing rubs against the white paint. I'd get a roll of helicopter tape and put some strips right under those spots.
I also recommend ditching the white tires and the white bar tape. That was one of the first things I did because after about two rides, they're both completely grey.
Congrats on the bike! You obviously have excellent taste. ;)
Amazon: 3m 36" x 2" Red $5.46
http://www.amazon.com/3M-Scotchlite-Reflective-2-Inch-36-Inch/dp/B000BO71M0
Ebay: 120" x 2" alternating red/white DOT certified tape: $12
http://www.ebay.com/itm/10-feet-dot-3m-reflective-tape-Each-piece-is-2in-wide-by-12in-long-6-red-and-6-/130906558757
I have some of the cheep 36" 3m tape (in white) and shining a light on it in a dark garage it definitely helps, has held up great though mud/rain.
The DOT certified tape is probably better (same stuff you see on semi-trailers). Looks like it has bigger hex reflector pattern.
Thanks for the feedback!
Thanks again!
These are exactly what I have on my spokes, they work really well. I also took the extra hub stickers and put them on my helmet instead.
Also in auto parts stores or paint stores (interestingly) or the corresponding departments of a larger store, you can find reflective tape. So far I've found white and red. I also usually find it right next to an identically sized green tape, but that one's not reflective, so don't fall for it. It'll be about two inches wide and not that long, it's kind of expensive. like this (though what I found wasn't that expensive)
If you cut it half as wide you can put it down the smaller parts of your frame (such as the chain guide), on pedal cranks, strips on your helmet, on any chain/cog guards, and if you really have steady and accurate fingers, around your spokes just like the Light weights stickers. Use full-width strips to make rings on the fuller parts of your frame.
I even took a leftover bit of the reflective tape and put it on the vinyl tube of my hydration pack, which hangs from the right strap. When I tuck it up into the left strap, I have a perfectly symmetrical reflective line across my chest.
I suppose if you don't mind wasting a whole lot of tape, or using a bunch of odd leftover scraps, you could lay the tape over the divots in your helmet and use a razor blade to cut out exactly the elliptical shape that's concave relative to the convex overall shape of your helmet. That would be cool to see. I don't have the guts yet.
The tapes can often be more reflective than the cheapo reflectors that come with your bike, so it's also not at all a bad idea to cover those surfaces as well.
Finally there' s the biggest amount of coverage you could possibly get, cover your frame. Or less extreme but definitely beyond the norm, buy fenders and cover those.
Putting party favors in these would be hilarious!
You could also do an "experiment" with these where they have to taste different foods to see the changes in flavor.
Gummy brains for goody bags.
A variety of safety glasses for all your scientists!
I like surprises! :D
Well, I don't know all of the variants used.
I do know some old ones, some standard issue ones, and some advanced ones.
The tags used for pets are around the size of a grain of rice. Doubt you have one of those.
Check your jacket and try to make your room use less consistent.
Audio bugs could be used on your phone by taking control of your microphone. Yes, hidden services could use your location, they track the 'cells' your phone connects to every time you change areas or use it. A competent, well-equipped group could track your phone if it was off or in airplane mode. Take the battery out, or remove the GPS temporarily. Some people go as far as to disconnect their cameras and microphones when not using.
Though, these are tech savvy people. The easiest method is the occasional use and burner.
RFID blocking box
Shop around though, this one has mixed reviews. You also could check out a safe/discrete networking guide.
Or
Someone could install a small brick thing under your car, like what the FBI used to use.
A mechanic or trained eye would most likely notice. They were pathetically clunky in the day, but must be better, now that 'the internet of things' is beginning.
The best source of information, by far in this decade, is obviously a cell.
Most people are dependent on their phones.
The simple solution is to leave the item at home, if you're concerned, or, once again, get a throw away [burner].
I don't want to encourage unnecessary paranoia.
I've built 5 PCs without a wrist strap, but some people swear by them, and they're definitely the safest option. Your best bet would be an online retailer. They are super-cheap (generally <$5, and here's one for <$2), but look kind of silly imo.
This has done the trick for me. At this point, my fade is complete, and I've realized I don't even care if they come to my house... but I've literally seen them walk up, see the sign (above the doorbell) and turn and walk away. It's pretty great.
Do you have a light-colored jacket you always wear? Rather than a safety vest, just grab some super reflective tape and put it on your jacket, bike, helmet, panniers, etc. Definitely worth investing in a bright, rechargeable light set as well.
You could always make shadowed socket holders out of Kaizen foam and place the sockets exactly where you want them. You can use a hot knife, long thin razor knife and/or a hole saw kit to make cut-outs for your sockets.
A wood burning kit like THIS works great on the foam for making finger grip holes and for cleaning up the bottoms of shadowed spots that are less than the thickness of the foam.
FastCap's long nose permanent markers are great for marking out the patterns of your sockets or other tools for you to cut on.
&#x200B;
Just my two cents.
https://www.amazon.com/gp/aw/d/B0025QI4XC/ref=yo_ii_img?ie=UTF8&amp;psc=1
Here is the container. It's definitely air tight, and very durable and thick. Can't beat the price, free shipping with Amazon prime. I think, including everything, the ingredients were more expensive than the whole setup lol.
I don't want to sound like your mom or anything butt it might be worth getting some black reflective tape so people see you better at night. I have an all black bike and when me and my father swapped bikes at night if you were viewing him from the side or even quartering he was pretty damn invisible. Just speaking from experience.
Stuff like this.
I held my own Mad Scientist party and I actually bought real beakers and test tubes! For a kids party though:
Biohazard treat bags
Hand Boiler Toys
One easy project to make for the kids is Glow in the Dark Bubbles
Surprise me.
I've attached these to my frame and helmet, they've lasted through 2 heavy winters. I found a 1cm wide section wraps almost perfectly around most spokes and is visible from a good distance. If you're creative you can trace designs onto it and cut them out with an x-acto knife.
White 3M Tape
Red 3M Tape
I had to do a double take to check that I didn't post this last night without remembering.
I am going through this same process with the 10x14 attic space above our bedroom. I started off with Plan B and tried a few different methods. Filter bags filled up much too quickly and would have been expensive but they did a great job of containing the mess. I have a Dust Deputy attached to my vacuum which helped, but inevitably, the shopvac would get clogged with insulation that made it out of the vortex. My most recent adaptation was to attach the dust deputy to the top of a 40 gallon airtight drum I bought from amazon and then use some old pantyhose around the shopvac filter. This greatly extends my times between either emptying the shopvac or emptying the 40 gallon barrel. Inevitably the shopvac gets filled first but the pantyhose does a great job of keeping the filter in usable shape.
I did buy a Toro leaf blower/vacuum and it worked well but I didn't have an airtight container at the time so the fine insulation would just blow out from under the lid of the trash can I was using. If you have ANY holes in the tubing, you will have a dusty mess on your hands. I plan on retrying this method on the remainder of my attic in the next couple of weeks. If/when it doesn't work adequately, I will buy some insulation bags from Amazon and that should finish the job for me.
https://www.amazon.com/Deputy-Standalone-Anti-Static-Cyclone-Separator/dp/B002JP315K/ref=sr_1_1?ie=UTF8&amp;qid=1496112200&amp;sr=8-1&amp;keywords=dust+deputy
https://www.amazon.com/Eagle-1601MB-Polyethylene-Lever-lock-Capacity/dp/B0025QI4XC/ref=pd_sim_328_2?_encoding=UTF8&amp;pd_rd_i=B0025QI4XC&amp;pd_rd_r=TWYG0J54TB8HRJBXHVX3&amp;pd_rd_w=L9VJ6&amp;pd_rd_wg=DlIiD&amp;psc=1&amp;refRID=TWYG0J54TB8HRJBXHVX3
I'm not going to try this(or I might) but I think if you daisy chained two dust deputies and two drums, you would be absolutely fine with a shopvac.
I also made the mistake of failing to consider the difficult in mixing the Green Fiber cellulose bales without their machine once I had removed the old insulation. I only needed 7 bags for above our bedroom but man was that a PITA. I used a concrete mixer attached to my battery powered drill and managed to get in a great rhythm but having the machine would have been a million times easier.
Congrats! One thing I use on mine for better visibility is night tape. Something like this: http://www.amazon.com/Motorcycle-Reflective-Safety-Tape-Adhesive/dp/B000NPNXP6
Is black during the day but VERY reflective at night. Made a huge difference on the back of my ST4s.
Your question is a little vague, but retroreflectors sound like they might work. You can purchase some here, although there might be better places online to get it.
Receiver hitch from minimania.com . Rack is very basic, this one:
https://smile.amazon.com/gp/product/B004QEKGA0
&#x200B;
I added most of the red retroreflective tape and replaced some of the bolts with stainless eyebolts from the hardware store.
&#x200B;
The straps go to the two attachment rings at the front of the trunk, up and over the trunk lid where I've protected the paint with some helicopter tape.
https://smile.amazon.com/gp/product/B000O6BQMG
&#x200B;
The instructions for the receiver hitch said not to attach a cantilevered load like this without reinforcing with straps.
&#x200B;
I don't have this thing on very often, but we're going camping tonight and it will be a lot easier to pack this way. I'll probably just have the cooler on it.
You can buy helicopter tape for cheap.
https://www.amazon.com/ISC-Helicopter-OG-Surface-Tape-Outdoor/dp/B000O6BQMG
tape everywhere that will rub on the bike, even top tubes . keeps the frame looking like new. prevents cable rub, and its clear and very hard to see.
your frame will be fine, stick a patch of tape over the area so it doesnt get worse.
I've got a couple of these and like them. They are above your price range, but were the lowest cost ones I felt comfortable purchasing. I've owned mine for nearly 2 years and haven't had a problem with them. I've even tested them extensively shooting them with dental x-ray systems to ensure they were accurately reporting.
So I suffer from nausea a lot. Buy a pack of emesis bags like this...
https://www.amazon.com/gp/aw/d/B06XS6T595/ref=mp_s_a_1_1_a_it?ie=UTF8&amp;qid=1536320004&amp;sr=8-1&amp;keywords=emesis+bag&amp;dpPl=1&amp;dpID=41xCiPCKyIL&amp;ref=plSrch
That’s not the only brand. Just check for “emesis bag.” You tie up the top by putting the top of the bag into one of the ring slashes. These can be folded into a small frisbee shape. One can fit in must purses. Carrying one around might help you feel more comfortable in general when going out because you have what you need if you get nauseous (like in a store or something).
I’m not sure if pharmacies carry them or not.
Amazon but apparently we bought them out of stock for now which I see as an awesome accomplishment
I have a few 2"x3" strips of this on my helmet and once I put them on, I definitely noticed cars hanging WAY further back than before when I'm riding at night. Blends in with my matte black helmet pretty well during the day but sure seems to light up at night.
https://www.amazon.com/dp/B000NPNXP6/ref=sxr_rr_xsim_1?pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_p=3008523062&amp;pd_rd_wg=DoEkB&amp;pf_rd_r=GDSMZTRAW1AJ916DN3CE&amp;pf_rd_s=desktop-rhs-carousels&amp;pf_rd_t=301&amp;pd_rd_i=B000NPNXP6&amp;pd_rd_w=Iik60&amp;pf_rd_i=reflective+tape&amp;pd_rd_r=78BMJJH2W2WX7WQ84ZE0&amp;ie=UTF8&amp;qid=1503114074&amp;sr=1
Emesis Bags, 24 for $10. Saved my interior twice. I hand them out to any pax that looks shakey.
https://www.amazon.com/Pack-Emesis-Disposable-Vomit-1000ml/dp/B06XS6T595/ref=sr_1_9_a_it?ie=UTF8&qid=1540843261&sr=8-9&keywords=blue+puke+bags
&#x200B;
dude. this is foolish. you should really contact your local police and fire so they can check. they have (or will contact) people qualified to determine if its safe.
edit: also certified geiger counters are like 300+ dollars. calling the authorities is free.
Yes, it is a real risk! But prevention is easy, just keep touching the case or any other metallic object every few minutes (with very high-end components I get OCD and do it every 2-3 mins).
I also just bought a strap along with the rest of the parts for my rig two weeks ago and it worked just fine: At ~$4 it isn't bad at all!
Helicoptor tape on amazon $25 looks solid, but kind of pricey when I only need about 6 square inches tops and I cant think of anything else I'd use it for.
Safety first!
These would look cool set out and the kids would enjoy boiling the water with just their hands!
Grow an insect
Plates and napkins
Goodie bags
Does she need a birthday outfit? Girls need accessories.
For me
Edit: formatting
I was considering one of these but the sides were just not tall enough. I went with one of these instead and it was perfect.
https://www.amazon.com/gp/product/B000NPBLAU/
If you want to do something crafty with your daughter, you could try to cut some of this 3m reflective tape into interesting shapes: http://www.amazon.com/3M-Scotchlite-Reflective-Silver-36-Inch/dp/B000BQRIV2/ref=sr_1_1?ie=UTF8&amp;qid=1452464185&amp;sr=8-1&amp;keywords=3m+reflective+tape. My experience with that tape is that it is very reflective, but you'll want to replace it after a couple years.
If you want something reflective on the spokes, these work pretty well: http://www.amazon.com/Lightweights-Power-Reflectors-Wheels-86-Piece/dp/B002KYFWQ6/ref=sr_1_4?ie=UTF8&amp;qid=1452464201&amp;sr=8-4&amp;keywords=reflective+bicycle+spoke
Also, Vespertine makes some reflective flower pins and such. My wife has one, so I can tell you they are definately very reflective, but they are kind of silly expensive: http://shop.vespertinenyc.com/category/jewelry. I'm not sure exactly where I can just get a sheet of whatever they are made of to make my own stuff.
Hmm, quite the predicament. Here is a solution that might work for you (this is for the goldfish)- go to a local hardware store or tractor supply or landscape store and try to find an all purpose tub, storage tote, or practically any large container, somewhere around 30-50 gallons. Most of these tubs are fish safe, and are very cheap. For filtration use a large sponge filter and pump which are a very cheap and a effective alternative to normal filters. I wouldn’t worry about heat at the moment as this is meant to be temporary, and goldfish can handle it briefly. I wouldn’t but any decorations or substrate in the tub, just leave it bare. This setup is actually widely used in the goldfish hobby, so it’s a great choice.
Here’s the supplies list on amazon for your convenience, but keep in mind you could also go and look for these products cheaper elsewhere and don’t have to be the exact ones
Sponge filter-
Bacto-Surge High Density Foam Filter https://www.amazon.com/dp/B00GOFPX9I/ref=cm_sw_r_cp_api_i_D0G6AbC8B1HRS
Pump-
VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump For Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord https://www.amazon.com/dp/B00EWENKXO/ref=cm_sw_r_cp_api_i_J2G6Ab01249QW
Air tube-
Penn Plax Airline Tubing for Aquariums –Clear and Flexible Resists Kinking, 25 Feet Standard https://www.amazon.com/dp/B0002563MW/ref=cm_sw_r_cp_api_i_l3G6AbXFY7BEV
Plastic Tub-
Rubbermaid Commercial FG424300BLA Structural Foam Stock Tank, 50 Gallon Capacity https://www.amazon.com/dp/B000NPBLAU/ref=cm_sw_r_cp_api_i_U5G6Ab4CHSP90
Cycling biology-
Fluval Biological Enhancer for Aquarium, 8.4-Ounce https://www.amazon.com/dp/B00FPIZ8Y0/ref=cm_sw_r_cp_api_i_26G6AbAR5QBRK
you can constantly wear a grounding strap like this
https://www.amazon.ca/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
But i build PC's all the time and I have never used a grounding strap. Whats more important is to make sure you don't produce statics. Don't wear socks and run over carpet for example. You can always ground yourself by touching, for example, a heat radiator or the grounding part in an electrical outled.
do yourself a favor and use a self sealing tape or dry vinyl tape. It's cheap, and won't turn into a mess like electrical tape will on a harness.
https://www.amazon.com/gp/product/B00823GUP6/
You could also add some reflective tape to your helmet if you already have one. Won't be noticeable during the day like a high-vis color, but it really helps at night.
I found this long nose marker very helpful when shadowing some of the drawers in my tool box. https://www.amazon.com/dp/B002NQPEE6/
Also, fresh box cutters helped greatly.
Lookin Great!
But that little bucket will quickly get clogged / problematic.
I might recommend something like this or this. You can easily add a bulkhead fitting and give yourself a way to have the water spill back in the pond. Then you pack a few mint / horsetail / lizard tail in there and you won't have much of a water clarity problem at all.
Too much plant filtration is just right.
PS. this is a great product as well, but you can't fit as many plants in it. 1 pot of mint would do wonders tho.
I grabbed a running vest from Target (~15 bucks) and a pack of Retro Reflective Stickers from Amazon to really brighten me up.
I've used racers tape for years. It works perfectly for areas where cables contact the frame. It also doesn't peel at the edges.
Interesting. I like this line of thinking.
I now keep my iPhone in one of these "black bags" whenever in large crowds (NYC commute, traveling, etc.) to minimize data and CC account theft.
For some labeling fun that's more legal, may I suggest "For rectal use only" stickers?
They're smaller, so they're fun to put on screwdrivers, remotes, etc
So what I would do is get a piece of magnetic imaging film [1] and survey the desk area for fields. Besides that I would introduce an insulator, for any development board I work on, I have used those green craft boards [2] which are seem to be great insulators. You might also try using a wrist connected grounding strap [3]. If there are any electrical posts built into the table, unplug them, and inspect the insulators and neutral & ground runs.
[1] https://www.amazon.com/Magnetic-Viewing-Film-Field-Display/dp/B00129CCGS
[2] https://www.amazon.com/Hobby-Craft-Double-Healing-Cutting/dp/B00GEKIM8W
[3] https://www.amazon.com/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
I just use this, and it's worked great for us for 3 years. Used to have JWs at my door every Sunday.
Theses are even cheaper and work great. https://www.amazon.com/gp/aw/d/B06XS6T595/ref=mp_s_a_1_sc_2_a_it?ie=UTF8&amp;qid=1538244061&amp;sr=8-2-spell&amp;keywords=emesys
I bought nice barf bags and stashed them everywhere- my desk, my bag, husband’s bag, car, etc so I’ll be prepared if I do throw up. So far just been really nauseous thou. These are the ones I bought: [Disposable Vomit Bags] (https://www.amazon.com/dp/B06XS6T595?ref=yo_pop_ma_swf)
I like my GMC300 as well https://www.amazon.com/GQ-GMC300EPlus-Fulfill-Radiation-Detector/dp/B00IN8TJYY/ref=sr_1_4?crid=PQ7KJG5GJZ1M&keywords=geiger+counter&qid=1571443280&sprefix=geiger%2Caps%2C278&sr=8-4
I would like a Geiger counter Please.
Yeah I know that already. What do you think about this one GCA-07W Professional Geiger Counter Nuclear Radiation Detection Monitor with Digital Meter and External Wand Probe - NRC Certification Ready- 0.001 mR/hr Resolution - 1000 mR/hr Range https://www.amazon.com/dp/B000796XSC/ref=cm_sw_r_cp_apa_i_R2vUCb2WVFMBE
PHARMEX 1-78G Permanent Paper... https://www.amazon.com/dp/B00U2H451G?ref=yo_pop_ma_swf
Happy rectal sticking
I've also had quite a lot of fun with these
Or consider getting your own cheapo Geiger counter and have a bit of fun!
https://www.amazon.com/GQ-GMC300EPlus-Fulfill-Radiation-Detector/dp/B00IN8TJYY/
True, Amazon has 1000 of them for $6. That specific company sells a lot of other labels for medical use too if you want some more variety in life.
If you need another purchase to get free shipping, try the Rectal use only sticker.
Free one-day shipping with Prime, too.
https://smile.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G?sa-no-redirect=1
I know some people that use helicopter tape on the area of their bikes that are subject to chainslap or cable rub. I don’t use it on my bikes, but the people I know that do like it.
Not really what you asked for, but you can try putting a whole bunch of retroreflective tape on a helmet. That way, you get to pick a helmet based on other features like comfort/face shield.
Amazon sells them for under 10$ but they are temp out of stock it looks like
Here is some tape
Any vinyl shop should have a 24" to 60" wide roll on hand.
Cost effective alternative:
http://www.amazon.com/3M-03456C-Scotchlite-Reflective-36-Inch/dp/B000BQRIV2/
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G/
you're welcome.
These glowsticks are insanely bright and last all night. I cracked them in the middle of a crowd at WEMF and they caught people's attention even among the hordes of other glowsticks.
http://www.amazon.com/gp/product/B0052ZAPXU
The fact that her Mjölnir is a hospital barf bag aka an "Emesis Bag" - good stuff.
Not sure what it is called, in faders I think it's a little more robust, probably silicone rubber. But most electrical tape is dielectric vinyl, which would probably work fine. Just search for some non-adhesive vinyl or cotton tape, (sometimes called "wiring harness tape"). Here's some "dry vinyl" tape on amazon.
I would like to introduce you to the wonders of helicopter tape. It prevents dings in surfaces you coat it with.
Retroreflector with light (not even strong) from camera direction is a great solution.
Premium:
http://optitrack.com/products/motion-capture-markers/#mcp1125
Moderate:
https://www.bhphotovideo.com/c/product/486008-REG/Reflecmedia_RM_1212_Chromatte_Tape_Roll.html
example:
http://imgur.com/a/RrZwB
Budget:
Not a true retroreflector like the two above, but much large than normal solid/incident angle:
https://www.amazon.com/White-Micro-Prismatic-Sheeting-Reflective/dp/B00K2QUI3G/ref=sr_1_3?ie=UTF8&amp;qid=1492658692&amp;sr=8-3&amp;keywords=retroreflective+tape
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G/ref=mp_s_a_1_1_sspa?keywords=for+rectaluse+only+stickers&amp;qid=1557941530&amp;s=gateway&amp;sprefix=for+rectal&amp;sr=8-1-spons&amp;psc=1 is the link to it if you are interested
Yes, for pharmacy use
PHARMEX 1-78G Permanent Paper Label,"FOR RECTAL USE", 1 9/16" x 3/8", Blue (500 per Roll, 2 Rolls per Box) https://www.amazon.com/dp/B00U2H451G/ref=cm_sw_r_cp_api_i_6MJOCbGPZ9FQZ
I got one of these signs, and it might just be coincidence, but since I put it up a couple months ago, I have had ZERO uninvited people come to my door, where before I'd have third-party energy shillers/clean water people/public radio fundraisers/etc at least a couple times a month (and that was just during non-business hours when I happened to be home).
There's also more 'tactical' ones than you'll typically find in a dollar store like https://www.amazon.com/Cyalume-ChemLight-Military-Chemical-Sticks/dp/B0052ZAPXU?th=1
I recommend these barf bags for keeping in your car: https://www.amazon.com/dp/B06XS6T595/
I've lived on 300 e here for 8 plus years now and one time a juggalo got too drunk partied and fell asleep in my car. I kicked him out and he came back 15 minutes later because he left his cell in my car.
Worst thing / Best thing? that ever happened....
I got this door sign and have never had another conversation about my eternal salvation since. - https://www.amazon.com/Soliciting-Business-Stylish-Outdoor-Knockers/dp/B01B39S9L8/ref=sr_1_4?ie=UTF8&amp;qid=1523285496&amp;sr=8-4&amp;keywords=no+religion+no+politics+sign
I would say I rarely encounter mormons that live downtown. My neighbors are my friends we shovel each others drive ways and pick up each others packages when we are away. It is the city and you do need to be aware but I don't lock my car and park in a drive.
Reflective tape is easily available if you can use that: https://www.amazon.com/3M-Scotchlite-Reflective-Silver-36-Inch/dp/B000BQRIV2
I used this for my stuff. But its thin, so itd be a pain for tracing a decal out.
There are 2 inch versions that would be easier to use. Finding the color you want might be hard. Example 1, Example 2
It looks like plain electrical tape until you shine a light on it when its dark.
The blumats have a 30gal resevoir with a pH controller. This has basically cut my weekly work in half. I just top off the res every couple weeks.
That's a 3x3 tray, so that leaves 6 inches on all sides for some pavers to hold up those shelves. I use a transfer pump and wand to feed from 5gal buckets and then pump the runoff out of the tray back into a bucket for reuse outside for my strawberries.
Edit: Here's what it looks like from above
Ground yourself on the case before touching anything, don't work on a carpeted floor, and if you want to be particularly cautious, get a grounding strap like:
https://www.amazon.com/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
http://www.amazon.com/gp/aw/d/B000BQRIV2/ref=redir_mdp_mobile?pc_redir=T1
You could try that^ I bought some and plastered my helmet with it. Seems to stick well. There's a reviewer who says it has stayed on their messenger bag and everything else he's put it on.
I always assume, and so I generally use a "Black Hole" Faraday bag when I travel until I'm in a spot I choose to place a call etc.
https://www.amazon.com/Black-Hole-Faraday-Bag-Anti-tracking/dp/B01BY9H5H6
Not getting paid for this or profiting in any way, just a sweet Faraday bag I bought. I am not a criminal, BTW, just a 4th amendment supporter.
Alachua county and GPD also got a ton of AR style rifles: https://muckrock.s3.amazonaws.com/foia_files/Florida_Law_Enforcement_Agency_DLA-LESO_1033_Program_Inventory_as_of_8-18-2014.xls.xlsx which may be needed, since our town is a nest of crime an chaos- /sarcasm. All FOIA, so yay "Sunshine" laws in FLA.
I also had a great link for the serious hardware like "mine-resistant" vehicles that the GPD and ACSO recieved under 1033, but I'll have to look for it. Wouldn't surprise me that there's a Stingray somewhere in town.
Well, if the material is just zinc sulfide, then it won't be radioactive. The problem is that I have no idea what it is, so I can't be sure. If you have the funds, you can buy a geiger counter for around 100$ to be sure. Here is a good and cheap one.
1000 for $8? Worth it.
for extra lulz.
I think this is a better Geiger Counter instrument, also available on Amazon at half the cost. Comes with NIST calibration too.
http://www.amazon.com/GCA-07W-Professional-Radiation-Detection-External/dp/B000796XSC/ref=pd_sim_sbs_328_2?ie=UTF8&amp;dpID=51jMiX9DBmL&amp;dpSrc=sims&amp;preST=_AC_UL160_SR160%2C160_&amp;refRID=0JYTH4ZV2H04DFM1P15T
I stuck some SOLAS tape on my black lid. Works well.
The same retailer also sells a Digital Geiger counter
It's the 3M Scotchlite tape. 2" wide. I think I found it at my local Fred Meyer or Walmart. I've been sitting on this stuff for some time.
Or you could just order it from Amazon
http://www.amazon.com/3M-Scotchlite-Reflective-Silver-36-Inch/dp/B000BQRIV2
Buy some reflective tape!
You can get scotchlite tape to put on things, and there are many pieces of clothing (like a reflective vest) that incorporate it. Shirts, pants, shoes, etc.
Apply this to your bicycle liberally.
http://www.amazon.com/3M-Scotchlite-Reflective-Silver-36-Inch/dp/B000BQRIV2
http://www.amazon.com/gp/aw/d/B000BQRIV2/ref=redir_mdp_mobile?ref_=cm_cmu_pg__header
I also put it on my bicycle
http://www.amazon.com/Motorcycle-Reflective-Safety-Tape-Adhesive/dp/B000NPNXP6/ref=sr_1_1?ie=UTF8&amp;qid=1417711135&amp;sr=8-1&amp;keywords=black+reflective+tape
http://www.amazon.com/Motorcycle-Reflective-Safety-Tape-Adhesive/dp/B000NPNXP6 Take a look at that link. I am getting some for the back of my bike and some for my helmet.
Was this the link you intended to post?
(you can't make a text post and a link post - gotta pick one or the other)
e: reminds me of reflective tape that's black during the day and highly reflective at night.
http://www.amazon.com/gp/product/B000NPNXP6/ref=oh_details_o02_s00_i00?ie=UTF8&amp;psc=1
Its the same as this. I paid a bit less I think, but this is the exact same kit.
Amazon
ISC Helicopter-OG Surface Guard
http://www.amazon.com/ISC-Helicopter-OG-Surface-Tape-Outdoor/dp/B000O6BQMG/ref=sr_1_1?ie=UTF8&amp;qid=1459028669&amp;sr=8-1&amp;keywords=isc+helicopter+tape
Non-mobile: http://www.amazon.com/dp/B000O6BQMG
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
Helicopter tape or tenacious tape. I use this stuff everywhere I can. http://www.amazon.com/gp/aw/d/B000O6BQMG
DRAMA
http://www.amazon.com/dp/B0025QI4XC/
Eagle 1601MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 30 gallon Capacity, 28.5" Height, 21.25" Diameter https://www.amazon.com/dp/B0025QI4XC/ref=cm_sw_r_cp_api_qZW4ybW7FGGMR
I use the 14 gallon version of this for sugar washes. amazon clicky
wear a grounding strap when installing parts
Get an anti-static ground strap.
I guess this probably works but why not just wear a grounding strap?
https://www.amazon.com/Anti-Static-Wrist-Strap-Grounding-Adjustable/dp/B002O6U65W
I don't reuse it but here ya go...
TapeCase TC790 Dry Vinyl 1" x 100ft Black (1 Roll) https://www.amazon.com/dp/B00823GUP6/ref=cm_sw_r_cp_apa_AwrPAbK7DYJ7S
Sticks to itself but nothing else. Cheap, quick and comes in different widths.
"Bondage Tape" is just dry vinyl tape,which is used for wire harnesses and, as someone else said, plumbing stuff. You can order it lots of different widths
https://www.amazon.com/gp/product/B00823GUP6/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1
You could tape up your existing cage: http://www.amazon.com/Ultimate-Survival-Technologies-Reflective-Silver/dp/B00DG0NA62
Just buy one of these and check a note in front of her. Nothing beats the scientific method!
I bought three sets of these, three of these main 950lmn a roll of 3m and a couple cams
You can get 1000 of 'em for about 10 bucks.
Did you have one of these?
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G type stickers?
This has been my alternative
a défaut je te propose des stickers for rectal use only
PHARMEX 1-78G Permanent Paper Label,"FOR RECTAL USE", 1 9/16" x 3/8", Blue (500 per Roll, 2 Rolls per Box) https://www.amazon.com/dp/B00U2H451G/ref=cm_sw_r_cp_api_-6n8BbDZRF18W
https://www.amazon.com/dp/B00U2H451G/
&#x200B;
I think you forgot the "For Rectal Use Only" label somewhere....
https://www.amazon.com/dp/B00U2H451G/ref=cm_sw_r_cp_apa_d7cRBbF95XNBB the ones I bought
For rectal use only.
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G
You can buy rolls of them
I'm buying these and so should all of you.
I think you should purchase these and give them out.
Buy these "FOR RECTAL USE ONLY" stickers on Amazon.
Stickers for this sub
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G
There you are
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G/ref=asc_df_B00U2H451G/?tag=hyprod-20&amp;linkCode=df0&amp;hvadid=193156914694&amp;hvpos=1o2&amp;hvnetw=g&amp;hvrand=6974352704374866013&amp;hvpone=&amp;hvptwo=&amp;hvqmt=&amp;hvdev=m&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9013122&amp;hvtargid=pla-311801599591&amp;psc=1
|Maybe although i feel this is more fitting.
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G/ref=sr_1_1/131-6096589-0436132?ie=UTF8&amp;qid=1527116544&amp;sr=8-1&amp;keywords=rectal+use+only+stickers
Or you could just have 1000 of them shipped to you for $9
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G
> I guess we just don’t dispense?
You start switching to these stickers.
https://www.amazon.com/gp/aw/d/B00U2H451G/ref=mp_s_a_1_1?ie=UTF8&amp;qid=1502722148&amp;sr=8-1&amp;pi=AC_SX236_SY340_FMwebp_QL65&amp;keywords=for+recital+use+only+stickers&amp;dpPl=1&amp;dpID=41LdjsqFhSL&amp;ref=plSrch
https://www.amazon.com/Pack-Emesis-Disposable-Vomit-1000ml/dp/B06XS6T595
Here you go!
I have these https://www.amazon.com/gp/aw/d/B06XS6T595/
Yes. There are devices made specifically for this used in electronics manufacturing all the time. Generally it'll be a wrist strap (or foot strap) that is conductive and plugs into a ground to discharge static continuously, but if you just want to avoid getting shocked you simply need to move the point of discharge away from your body. Holding onto a conductive (non-grounded) object like a steel rod and touching that rod to a conductive, grounded surface will discharge the static but you shouldn't feel anything since the discharge is between the two conductive surfaces and not your skin and something else.
I was hoping to get away with just a nest box. I will use one of these down the line though if I run into the female having bad egg cycles.
https://www.amazon.com/gp/product/B000NPBLAU/ref=ox_sc_sfl_title_1?ie=UTF8&amp;psc=1&amp;smid=ATVPDKIKX0DER
Awesome! Don't let your dreams be dreams.
I wear a blinking red light at night on the back of my belt, just set it and forget it until you get home. Something I've thought about before is making a reflective tape belt:
https://www.amazon.com/3M-Scotchlite-Reflective-Silver-36-Inch/dp/B000BQRIV2
I got 4 of these from being a patron to a podcast called Hysteria 51, but they don't seem to be so hard to find
https://www.amazon.com/PHARMEX-1-78G-Permanent-Paper-RECTAL/dp/B00U2H451G
> hard to find and buy in small quantities
http://www.amazon.com/3M-Scotchlite-Reflective-Silver-36-Inch/dp/B000BQRIV2 Amazon disagrees. There are plenty of color and size choices on there.
OK, this probably won't be the most well reviewed response, but it worked for me. Just be aware you need a trailer for this.
After a few years of evap ponds, and other things, I got frustrated and just bought 2 of these. I thought would need them both, but in reality, I used maybe 1/2 of one with gray water from showers and cooking. Put some bleach in it from time to time. Dumped it at a gray water approved place after the burn. 7 people will maybe fill 1 if you aren't sloppy.
> Splice them into your trailer wiring
That's what I did. I went up about 4" from the 7-pin plug, cut the necessary wires, used uninsulated butt connectors with a closed-barrel crimper and adhesive-lined heat shrink to splice in a 6-pin Deutsch DT connector pigtail, then built my own wiring harness that plugs into the Deutsch connector and ran it up to the headache rack.
Went with the 6-pin Deutsch connector since I only needed 5 of the 7 wires (LT, RT, Tail, Backup, and Ground) and 5-pin Deutsch connectors aren't available. Deutsch DT connectors are frequently used in the automotive aftermarket (probably more so than Delphi Weatherpack connectors). I know Rigid Industries uses them for their LED lights, and Smith Race Wire uses them for parts of their custom wiring harnesses.
Also, since you can only close-barrel crimp one end of the uninsulated butt connectors, I chose to close-barrel crimp the side that had only one wire (since closed-barrel crimping is more secure, and the one wire was looser in the connector) and used Channel Lock 909 Pliers to crimp the end with two wires.
Once you made your harness, make sure you slip it into some split wiring loom. Using a loom insertion tool makes quick work of that. Wrap the wiring loom with non-adhesive dry vinyl tape for a factory-finished look and to avoid a gooey, sticky mess in case you need to unwrap the wiring harness in the future.
Finally, a good wire stripper will save your hands a lot of fatigue compared to using a standard wire stripper that you have to always pull the wire through.
I'm in California where our two largest concerns (mine, anyway) are earthquakes and fire.
For earthquakes it's standard preparation stuff because aspects of grid can shut down for short or long periods of time. There's also the "get out of the house now!" type situation which is really just shoes and a flashlight, or just your human body. If your bag is downstairs and you're upstairs you're not going to run to a bugout bag first. It's just get out (depending on the quake, the building, etc).
I do have a bugout bag primarily for fire evacuation, which has:
I also have a google spreadsheet printed out that has the items we want to take. The evacuation orders can come at any time and you might be knee deep in some project or sick on the couch, you need to be able to mindlessly grab items that a smarter-you considered bringing. The bag is just the one that we're really screwed if we don't have. This is my list, it's taped under my desk at home.
Edit: also, there's a column for different family members. My kids have stuff they're supposed to grab (a change of clothes, etc) while mine has the chainsaw and a shovel.
It's possible you'll have less than 20 seconds to escape your home but chances are you'll have at least a few minutes, maybe even a few hours. Having a list of things to grab from the house thought out in advance seems reasonable to me. And some stuff that's super useful (like dumping everything from the medicine cabinet into a bag) is more of an instruction than an item, per say.
Dolls (for kids)
laptop
EMT gear
Backpacking food
Flashlights
Gasoline tanks
Wet wipes
Toilet Paper
Firearms
Ammunition
Map (Marked)
AA/AAA Batteries
Chainsaw
Shovel
Solar Panel
Tent
Soap
Medicine Cabinet
Checkbook
2m Radio
10 gallons water
2m base antenna
2m pvc ant mast
I also have a list of things I need to do if I leave the house, again this is tailored to fire evacuation. This is taped to the inside door of our utility closet. Easy to find but house guests aren't staring at it and we can keep our home more "homey" looking versus a forward operating base. These are taken from CalFire's suggestions and my own experience in and around fire.
&#x200B;
Hijacking your comment, my friend bought these on amazon and put them on all our shit at work. Fucking dick
https://www.amazon.com/gp/product/B00U2H451G/ref=ppx_yo_dt_b_asin_image_o05_s00?ie=UTF8&psc=1
Go forth and spread chaos.
If it cant transmit it's the same as dead.
Couple things to add for the shopping list: especially for the 3am part:
Safety Vest
Slap light for left ankle to identify your edge
Lights
About $25 for the above.
Rear mirror
Make sure the bike has the standard reflectors on the spokes, pedals, front and back as well.
Reflective tape if you are riding an all black or dark bike - wrap strips around your spokes, frame and seatpost
Some would say ALL THE ABOVE TOGETHER Is overkilling it and maybe it is all it takes is one semi-drunk who did a couple too many shots blasting down some rural road at 4am doing 90mph to end you.
Even just a glancing blow off the side of a big 4x4 mirror rig could fuck you up bad and NOW YOU'RE DOWN.
You're laying on the side (if you're lucky and didn't get hung up and dragged) of a rural road at 5am waiting for the next drunk to come along and finish the job.
This is a real concern.
Now if this happens and you are wearing dark clothes on a black bike with no reflectors they could end up hitting you before they ever see you especially when you add dark (limo) tinted windows + stereo blasting and subwoofers thumping.
Now add texting on the phone to the equation.
It's all over. You're roadkill.
You need to make yourself more than just a little visible. They need to see you from a fricken mile away. even if you are sprawled out in the street.
TIP: I use the slap light so they can see where the edge of me actually IS. I usually hang it on the left end of my handlebar - on my rearview mirror. Or on my left ankle so there is a light moving up and down along with pedal reflectors - that says 'dude on a bike up ahead'.
ESD wrist straps are usually something like a megohm to ground so that there is enough of the path to discharge any static buildup, but not enough current to kill you should something go wrong. If you work on live equipment and have a short to ground on one arm and touch something with the other, the current path goes straight across your chest. Here, $1.73 for a strap If you want to make one you need 1 megohm resistor to put between your body and the ground.
Wiki