Reddit mentions: The best faucet aerators
We found 42 Reddit comments discussing the best faucet aerators. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 23 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. LDR Industries 530 2050 Aerator, One Pack, Silver
- Faucet to hose aerator adaptor allows connection to standard 3/4-inch male hose thread
- Converts standard male (15/16-inch x 27 thread) or female (55/64-inch x 27 thread) aerator to 3/4-inch male hose thread or 15/16-inch x 27 male thread
- Lead free compliant - meets ca's Ab1953 and vt's 18 vsa low lead laws
- Hose adapter for male/female/male
- For faucets that use a less common thread will require an additional adapter.
Features:
Specs:
Color | Silver |
Height | 3.15 Inches |
Length | 1.5 Inches |
Number of items | 1 |
Size | One Pack |
Width | 2 Inches |
2. Hands Free Toilet Flusher, Foot Pedal Toilet Flush Adapter
Toilet Flush is made of durable ABS PlasticHelps people with limited mobilityPerfect for public toilets as well as private homes
Specs:
Weight | 4.34 Pounds |
3. DANCO Multi-Thread Garden Hose Adapter for Male to Male and Female to Male, Chrome, 1-Pack (10513)
CONNECTS female garden hose to male or female faucet OR male or female aerator to male or female faucetCONNECTIONS: 15/16”-27M or 55/64”-27F x 3/4” GHTM or 55/64”-27MQUICK AND EASY connection and garden hose installation with multi-thread design to fit both inside and outside threads giving...
Specs:
Color | Brass |
Height | 7.5 Inches |
Length | 25 Inches |
Number of items | 1 |
Size | Male to Male or Female to Male Aerator Adapter |
Weight | 0.03 Pounds |
Width | 14.5 Inches |
4. SharkBite 25087 Faucet Installation Kit, Angle Stop, Plumbing Fitting Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT, Brass
INSTALLS IN SECONDS: Faucet Installation Kit requires no special tools, no soldering, no crimping or glue. Just push to create a watertight sealPERFORMANCE: Rated to 200 PSI and 200 Degrees F. Use in potable water and hydronic heating applicationsVERSATILTY: SharkBite connects Copper, PEX, CPVC, and...
Specs:
Color | Brass |
Height | 10.5 Inches |
Length | 1.5 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 1 Pounds |
Width | 7.5 Inches |
5. Tri-Max 3 Flow Rate Aerators - Niagara Conservation | Chrome Aerator w/ Needle Spray (N3610CH)
- MULTIPLE FLOW OPTIONS - This adjustable nozzle utilizes three pressure-compensated flow rates: 0. 5 GPM flow rate for soaping, 1. 0 GPM for washing, and 1. 5 GPM for a powerful rinse mode. Performs well at any water pressure, and the threaded insert is removable to hide the threads.
- HIGH PERFORMANCE & EFFICIENCY - Niagara Conservation Tri-Max Faucet Aerators increase spray velocity, reduce splash, save water, and save the energy used to heat water. The Tri-Max will provide a forceful sprayer nozzle for your home and sink.
- EASY INSTALLATION - The Pressure-Compensating Faucet Aerators are easily installed and work with either kitchen or bathroom faucets. Will be a perfect replacement for a broken aerator, a perfect cleaning removal tool for your dishes, glasses, silverware and more.
- QUALITY DESIGN - This faucet aerator sprayer attachment features a chrome-plated body with 15/16-inch dual threading to fit most male and female faucet sprayers, Santoprene washers, and Colcon internal parts. Male: 15/16"-27, Female: 55/64"-27.
- WATERSENSE CERTIFIED - Our water-saving faucet nozzle provides high water efficiency as it is WaterSense Certified, offering consumers a simple way to make product choices that use less water with no sacrifice to quality or product performance.
Features:
Specs:
Color | Chrome |
Height | 1 Inches |
Length | 1.5 Inches |
Number of items | 1 |
Size | Standard |
Weight | 0.04 Pounds |
Width | 1 Inches |
6. SharkBite UC140LFA Pex Barb Coupling, 1-Inch x 1-Inch, brass
- INSTALLS IN SECONDS: No soldering or glue; Just crimp to create a watertight seal
- VERSATILE: SharkBite plumbing fittings fit copper, CPVC, CTS, and PEX pipe and connect all 4 types in any combination
- LEAD-FREE: Made of high-quality forged DZR brass that is lead-free
- HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
Features:
Specs:
Color | Brass |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | 1-Inch x 1-Inch |
Weight | 0.2 Pounds |
Width | 2 Inches |
7. Brass Craft PSSC-63 Gas Range Gas Fitting Adapter
Manufactured in ChinaEasy to useHighly durable
Specs:
Color | Brass |
Height | 5.63 Inches |
Length | 1.22 Inches |
Number of items | 1 |
Weight | 0.2 Pounds |
Width | 3 Inches |
8. Larsen Supply CO, INC. 09-1661NL No Lead, Three Piece Faucet Adapter Kit, Chrome
- The product is 3PC Univ Aerator Kit
- Easy and simple use kit
- The product is manufactured in China
- Chrome plated brass
- Aerator X Aerator
- Includes [3] adapters and washers to adapt 15/16-Inch-27 male to 3/4-Inch-27 male and 13/16-Inch-27 female thread
- Used to adapt various aerator threads
- Lead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications
- Chrome plated brass
- Aerator X Aerator
- Includes [3] adapters and washers to adapt 15/16-Inch-27 male to 3/4-Inch-27 male and 13/16-Inch-27 female thread
- Used to adapt various aerator threads
- Lead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications
Features:
Specs:
Color | Chrome |
Height | 3.81 Inches |
Length | 0.94 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.02 Pounds |
Width | 1.86 Inches |
9. DANCO Garden Hose Adapter for Female to GHT Male, Chrome, 1-Pack (10512)
This is made of chrome-plated brass for greater durability.Has a small threaded design for a female 55/64-27 x male 3/4 garden hose.Offers a quick connection that is incredibly easy-to-install.Connects male aerators to female faucets and female aerators to male faucets.This product is in compliance ...
Specs:
Color | Chrome |
Height | 14 Inches |
Length | 19 Inches |
Number of items | 1 |
Size | Female to GHT Male Aerator Adapter |
Weight | 0.03 Pounds |
Width | 8.75 Inches |
10. Danco 36162W 13/16 Aerator Screen, Pack of 20
- Durable stainless steel construction
- Fits 13/16 in. faucet retainer
- Keeps water flowing smoothly
- Easy to Install
- Includes 2 aerator screens
Features:
Specs:
Color | Chrome |
Height | 2.75 Inches |
Length | 0.5 Inches |
Number of items | 1 |
Size | 13/16-Inch - 20 per Bag |
Weight | 0.3 Pounds |
Width | 2.5 Inches |
11. Faucet Adapter
- Fits most kitchen and bathroom faucets
- Chrome plated brass.
- Dual threads 15/16"-27 male and 55/64"-27 female to 3/4" Male Garden Hose
Features:
12. Neoperl 11 9110 5 Cache Plastic Clip with 4 Keys, 1 of Each Size Key
Plastic Clip4 Keys1 of each size key
Specs:
Number of items | 1 |
13. LDR Industries 501 2190 Faucet Spray, White
- Slip on aerator/spray
- Made of durable rubber
- Flexible design
- Adjustable spray screen
- Lifetime limited warranty
Features:
Specs:
Color | White |
Height | 3.75 Inches |
Length | 5.5 Inches |
Number of items | 1 |
Width | 3 Inches |
14. Faucet Aerator Adapter Kit - Six (6) Piece, Male & Female
- Food-grade aluminum die-cast, pie plate as a whole, the quality is reliable
- Simply load the burger maker with meat, fish or a veggie mixture and press down the handle to produce a perfect thick round burger!
- Non-stick cast aluminum, 100 free parchment paper included, which makes releasing the burger from the press a breeze, also can be used for BBQ
- More than a mold. Can be used as a roast plate and heated on the fire directly
- Detachable solid plastic handle saves storage space when going out for picnic or outdoor BBQ
Features:
Specs:
Height | 0.5 Inches |
Length | 0.5 Inches |
Width | 0.5 Inches |
15. Moen 169031 Optional AC Adapter Service Kit for Moen Kitchen Faucets with MotionSense
- KIT INCLUDES: AC Adapter and Power Splitter
- GENUINE MOEN REPLACEMENT: Authentic Moen AC adapter replaces the battery pack included with U by Moen and MotionSense faucets. The Power Splitter allows both the AC adapter and battery pack to connect to your faucet.
- PEACE-OF-MIND: Designed for hassle-free installation
Features:
Specs:
Color | N/A or Unfinished |
Height | 4.5 Inches |
Length | 2.2 Inches |
Number of items | 1 |
Size | 1 Kit |
Width | 3.8 Inches |
16. Waternymph 1.8GPM Kitchen Sink Aerator Solid Brass - Big Angle Swivel Faucet Aerator Dual-function 2 Sprayer - Swivel - Polished Chrome
- 2 Water Flow Modes : The kitchen faucet aerator replacement has soft Bubble Stream(1.8GPM) and Strong Sprayer Shower(1.8GPM).This kitchen swivel aerator has great water pressure and flexibility to make water reach anywhere you want.
- Solid Brass Made: All metal kitchen sink aerator is made of solid brass,and this kitchen faucet extender has smooth surface and chrome-plated,which can withstand water pressure changes and daily rust.
- 360° Swivel Metal Faucet Aerator: The faucet sprayer can be rotated 360-Degree.Bathroom faucet aerator has big angle spray range makes water spray reaches every corner of the bathroom or kitchen sink.
- Water Saving:This universal splash filter faucet aerator has high water pressure that can quickly wash fruits or dishes and remove stains.The kitchen sink nozzle can save water about 30%~70% (compared with standard bubble).
- Easy Installation:Directly installed by hands without tools.The faucet swivel attachment has 55/64 Inch-27UNS Female Thread Aerator(If your faucet is male thread, directly connect it).15/16 Inch-27UNS Male Threaded Adapter was included(If your faucet is female thread, use the adapter to connect).
Features:
Specs:
Color | Chrome - 55/64 Inch Female Thread(15/16 Inch Male Thread Adapter inclued) |
Height | 1.89 Inches |
Length | 0.94 Inches |
Size | 1.8GPM Flow Rate |
Weight | 0.2 Pounds |
Width | 0.94 Inches |
17. T&S Brass 015425-45 Dual VR Aerator Key
- Country Of Origin: United States
- Model Number: 015425-45
- Item Package Dimension: 5.0" L x 3.0" W x 101.0" H
- Item Package Weight: 0.50044933474 lb
Features:
Specs:
Color | Silver |
Height | 5 inches |
Length | 3 inches |
Number of items | 1 |
Width | 1 inches |
18. LASCO 09-2125 Faucet Aerator Diverter 1/4 Inch Barb,Chrome
Chrome plated brassDiverter valve with 1/4" barb55/64" X 27 female thread2.2 GPM at 60 PSILead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications
Specs:
Color | Chrome |
Height | 1.5 Inches |
Length | 1 Inches |
Number of items | 1 |
Width | 2 Inches |
19. LASCO 09-1451NL No Lead, Dual Thread, Male Hose Faucet Adapter
Chrome plated brassAerator X hose adapter55/64-Inch - 27 female X 15/16-Inch -27 male thread x 3/4-Inch male hose threadUsed to adapt various aerator threadsLead free product, meets California AB-1953, Vermont, and new federal standards for low lead applicationsChrome plated brassAerator X hose adap...
Specs:
Color | Chrome |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 0.1 Pounds |
Width | 1 Inches |
20. Moen 145058 Shower Adapter Kit Replacement Part Converts Standard Valve To Moentrol Valve
- Shower Adapter allows you to update your Moen Trim on the Standard style valve to Moentrol Trim.
- Standard and Moentrol Valves are controlled with the Push and Pull of the shower handle.
- Made from Solid Brass.
- Easy Installation.
- Moen Replacement Part Kit includes Adapter Plate, 2 Screws and Instructions.
Features:
Specs:
Color | Unfinished |
Height | 2 Inches |
Length | 4 Inches |
Number of items | 1 |
Weight | 0.2 Pounds |
Width | 4 Inches |
🎓 Reddit experts on faucet aerators
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where faucet aerators are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Sorry I'm late to respond, but if you want to reply to someone, you need to click the "reply" link under their comment. Then add your comment as a reply to them, it will notify them you replied, and they'll know the reply is for them.
This reply is probably a bit long, lol. But I'm bored, so I go into some detail, and give some suggestions on tools n' such you can use for various things. You don't have to use them, obviously.
===
====
I do my mashing in a 5gal stainless steel pot, and I do my fermenting in these 5gal buckets (foodsafe from Home Depot). I use these lids, as it has an extendable spout which is the perfect diameter for a No. 7 size drilled rubber stopper, which I stick the airlock in.
For the actual mashing process. I do the following. So, not far off from what you do, except the starting temperature, since going above 161F can damage some of your enzymes and slow things down. These steps haven't failed me yet.
I mix up the yeast culture as soon as I hit the 150F temp of the mash, by pouring the yeast (1tbsp) into 2cups of warm water with a pinch of sugar, a pinch of DAP (aka diammonium phosphate), and a pinch of Magnesium sulfate (aka epsom salt, I bought at walmart in a large jug). Then I just let it sit while the yeast rehydrates and starts doing it's thing. When the mash is down to around 80F, I pour that mash into a sanitized 5gal bucket, then when it hits between 75F to 70F, I pour the yeast mix into the mash in the bucket, close the lid, put in the stopper+airlock, and leave it alone for about 3 days, before I check on it.
When I check on it, if it has slowed down significantly, or is stuck. I do the following:
That usually accounts for all the stuck fermentation issues.
===
===
Hope this helps!
If you can verify that there's pressure behind those caps, i.e. that they're plumbed into the main system but sealed, then it will be very easy to finish. Any plumber could do it in 45 minutes max.
The drain too, just requires a fitting glued on to accept the chrome or plastic P-trap from the sink. That's even easier...like 10 minutes.
If you're wanting to get into this a little, go ahead and do this:
Buy a drain trap, and a suitable adapter for your drain pipe (probably 1.5" PVC, but possibly 2". Can't tell from the photo. Measure the outside, and tell the home labyrinth attendant, he'll get you the right one.). That'll get your drain attached, as long as there's one in the sink. If not, you need a sink drain to attach to as well.
Then get yourself this sink kit. This is what lets you connect your hot and cold supply lines to the faucet. No soldering required, just a clean end, push on, and you're done.
If you want to be sure this is hooked up right: turn off the water to the whole house and relieve pressure by turning on a faucet that runs. Make sure no other faucets run at all. Take a hacksaw and cut off the cap, staying as square as you can. Have a bucket ready, and have someone else SLOWLY turn on the water. If you get water out of both pipes, you're golden, and you're ready to proceed with the sink kit above. If not, slap a couple of these end caps back on the pipes and call a plumber...it needs more work.
You can insulate pex just as easy as copper, just an FYI. But more to the point, it sounds like you're being energy conscious which I think is awesome.
What's the flow rate of your sinks faucets?
If you're remodeling maybe it's time to reduce the pipe size to a minimum for the flow rate and run separate home runs from each device to a manifold.
Take a read through this.
http://www.garykleinassociates.com/PDFs/15%20-%20Efficient%20Hot-Water%20Piping-JLC.pdf
Another alternative, if you're using really low flow faucets, might be able to put in faucet aerators with a switchable flow rate, such as this.
https://www.amazon.ca/Niagara-Conservation-N3610CH-Water-Saving-Standard/dp/B0096C2IVC/ref=mp_s_a_1_1?ie=UTF8&qid=1538264957&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Niagara+faucet+aerators&dpPl=1&dpID=418PdF5l0XL&ref=plSrch
I wish they made one of these for the kitchen that would go down to 0.5gpm and up to say 5gpm for things like pot filling.
Since you said you're interested:
After many hours of research and planning, I have concluded the cheapest, and, strangely enough, easiest solution for a basic setup, assuming you are starting with nothing, is simply to get one of these. Unscrew the aerator from the kitchen faucet, screw on that part, and attach the water hose to the other end.
Again, assuming you're starting with nothing like me, all parts combined when going with other solutions would cost approximately $40 and up, including using 3/8 tubing and fittings. And that's for the absolute bare bones food safe setup.
I didn't have a garden hose, so that was the most costly expense. I decided to go with this one. Those two parts put me at $24 and some change, plus another $7 for shipping. For about another 50 cents, which would put me over the $25 total, I could get free shipping. So I got some desoldiering wick.
Total project cost: $27.xx
Estimated time to install: About 5 minutes (rounding up for estimated time spent goofing off)
Final note: There were several people reporting sharp edges on that adapter. If you get it, my advice is to wear thick leather gloves, and attach the adapter to the hose first. Then wrap it in several layers of duct tape so when you need to attach/detach it from the faucet, you won't need gloves and it won't cut up your hands.
Pretty sure this is what you're after
LDR 530 2050 Faucet to Hose or Aerator Adapter Lead Free https://www.amazon.com/dp/B00BHZLR4K/ref=cm_sw_r_cp_api_mVAKzbPBW7GZP
You will need to remove your aerator and replace it with a 15/16 thread x make hose thread faucet adapter.
Like this one.
https://www.amazon.com/gp/aw/d/B00BHZLR4K/ref=dp_ob_neva_mobile
From there you can leave that on and install a new aerator on that too allow for easy switch outs.
They have I have seen them before in a resaturant or bar or something (I was drinking so it was the best thing ever for a good while), but I just gave a quick look and they have similar thing on Amazon http://www.amazon.com/Hands-Toilet-Flusher-Pedal-Adapter/dp/B0018RVWZ6
Thanks, appreciate the input.
Any chance you could help me find the HDPE 1" brass barb fitting online? I'm going to check my local hardware stores on the way home but not sure how common this fitting is.
And just so I'm sure, I'll need this 1" brass barb to go into the well's HDPE pipe, then the other ends threads into a 1" brass 90, then it would be whatever PEX connection to the other end. Does that sound right?
So far, just for reference, I've found a barb fitting, brass 90, PEX from 90
Am I close?
They can be, for $10. That's what we have and it's awesome.
https://www.amazon.com/dp/B00R1IIX5S/ref=asc_df_B00R1IIX5S5111052/
It will be something like this.
Make sure to use natural gas line tape and not pipe tape.
Check it with soapy water for leaks when done.
Depending on the brand, if purchased new, there should have been one included in the carton with the faucet. But then again you wouldn't have posted here if it were in your possession.
Neoperl has a 4-key kit, designed to fit most concealed aerators, available through Amazon: Neoperl 11 9110 5 Cache Plastic Clip with 4 Keys
Of course, you could always contact the manufacturer if you know the brand of the faucet.
These might help you out.
nm, i guess I could use something like this
Hardware stores sell those metal mesh filters (that are meant for faucets and whatnot) for real cheap. If I remember correctly. Something like this, although the link seems expensive
you can get a sink hose nozzle adapter if you would like to use a hose:
https://www.amazon.com/Multi-Thread-Garden-Adapter-Female-10513/dp/B008M6KFD6/ref=sr_1_7?crid=8K7470NSMC5P&keywords=sink+hose+adapter+to+garden+hose&qid=1567541768&s=gateway&sprefix=sink+hose+adapter+%2Caps%2C335&sr=8-7
Are you sure that you can't unscrew the aerator from either the kitchen or bathroom faucet and use a hose adapter?
Or perhaps there is a clothes washer hookup you could tap into.
Yeah no... /u/icedevil500 is wrong - yes you can buy adaptors, they are made of rubber however and slip onto your adaptor, no threads required. You may need to replace it after it dries/wears out... Make sure you find one that fits the diameter of your adaptor spout. You can find one at a lowes/home depot, or on amazon
I bought one of those, but my threads are buried in the faucet, so the flange on the one i got prevents me from using it! do you know of one that is a bit longer? FTR i got this one https://www.amazon.com/LDR-530-2050-Aerator-Adapter/dp/B00BHZLR4K/
Probably something like this, along with a garden hose faucet adapter kit for your sink.
Often RO systems require a minimum pressure to operate and require a booster pump.
preventative maintenance aint hard.
and after 5 seconds of research, heres an AC option
Moen 169031 Optional AC Adapter Service Kit for Moen Kitchen Faucets with MotionSense https://www.amazon.com/dp/B01CNBSLTK/ref=cm_sw_r_cp_apa_i_fSVlDbNY4NCK7
https://www.amazon.com/Moen-169031-Adapter-Service-MotionSense/dp/B01CNBSLTK
good tidings
While REALLY not made for this, I would put one of these on as a half-joke.
T&S Brass 015425-45 Dual VR Aerator Key https://www.amazon.com/dp/B00DVSJD5Q/ref=cm_sw_r_cp_api_i_obBrDb7V8CTNJ
GAME CHANGER
https://www.amazon.com/gp/product/B00BHZLR4K/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Connect this to a faucet in your hose (preferably the sink by the tub, so you can drain there) and connect your hose connection on the wort chiller tubing to it.
Moen (that is a Moen Chateau shower valve) makes a one and two inch stem extension kit for shower valves using a 1225 cartridge, they also make an adapter kit so you can use new trim with older valves; replace your cartridge while you are at it. When looking for new trim, search "Moentrol trim" on Google.
https://www.amazon.com/Moen-137347-Handle-Extension-Kit/dp/B001DO6TZC
https://www.amazon.com/Moen-145058-Adapter-Kit/dp/B002C59VTC/ref=cm_cr_arp_d_product_top?ie=UTF8
https://www.amazon.com/Moen-1225-One-Handle-Cartridge-Replacement/dp/B0006290R6
https://www.moen.com/customer-support/faq
here ya go
I actually just ordered this for a utility sink in my basement.
https://www.amazon.com/gp/product/B008M6KFD6
$10 sink adapter would have worked, or this adapter for even cheaper depending on your sink
Is this correct? https://www.amazon.com/Danco-Multi-Thread-Aerator-Adaptor-10513/dp/B008M6KFD6
https://smile.amazon.com/dp/B0074II66G/ref=dp_cerb_2
different one that does the same thing.
They make adapters to do exactly what you're looking for. It requires removal of the aerator on your faucet and then screwing the new adapter on on. Here's a link to one on Amazon.
https://www.amazon.com/Multi-Thread-Garden-Adapter-Female-10513/dp/B008M6KFD6/ref=sr_1_9?crid=B1MW83MF9BEW&keywords=faucet+to+hose+adapter&qid=1563902791&s=gateway&sprefix=faucet+to+hose%2Caps%2C158&sr=8-9
DANCO Multi-Thread Garden Hose Adapter for Male to Male and Female to Male, Chrome, 1-Pack (10513) https://www.amazon.com/dp/B008M6KFD6/ref=cm_sw_r_cp_api_i_lxD5CbBNCCHWR
I use this to fill up the kids’ splash pool. Maybe it could work? Depends on your sink.
Otherwise, I’ve taken a big pitcher and slowly filled it. Not fun!