Reddit mentions: The best golf balls
We found 168 Reddit comments discussing the best golf balls. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 103 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. PrideSports Practice Golf Balls, Foam, 12 Count, Yellow
- Soft, dimpled foam
- Yellow color for easy visibility
- Indoor/outdoor use
- Includes 12 foam practice balls
Features:
Specs:
Color | Yellow Foam |
Height | 1.5 Inches |
Length | 6 Inches |
Number of items | 6 |
Release date | December 2011 |
Size | OTH |
Weight | 0.19 pounds |
Width | 5 Inches |
2. Wilson Staff Duo Golf Balls 12pk White
- Long off the tee - exceptional distance performance and improved control due to lower spin off the driver
- Soft around the green - softer feel for improved playability around the greens
- Half the compression of the average leading competitor balls
- A high C.O.R. results in high velocity and exceptional distance
- Seamless 302 dimple pattern results in consistent ball flight
Features:
Specs:
Color | White |
Height | 4 Inches |
Length | 12 Inches |
Number of items | 12 |
Release date | January 2012 |
Size | 12 |
Weight | 1.45 Pounds |
Width | 8 Inches |
3. Callaway Hex Bite Golf Balls (One Dozen)
- Pattern : HEX Aerodynamics and 3 piece multi layer construction
- Soft outer cover for exceptional spin
- Incredible distance and control
Features:
Specs:
Color | White |
Height | 5.5 Inches |
Length | 7 Inches |
Number of items | 1 |
Size | 12 balls |
Weight | 1 Pounds |
Width | 7 Inches |
4. Assorted Bridgestone B Grade Recycled Golf Balls (Value Pack of 48)
- Assorted models & styles
- Recycled means savings!
- Performance is not compromised
- Each ball is washed, cleaned and inspected
- Satisfaction quaranteed
Features:
Specs:
Height | 5.1574803097 Inches |
Length | 6.7322834577 Inches |
Release date | February 2011 |
Weight | 0.0044974301448 Pounds |
Width | 1.7322834628 Inches |
5. Callaway 50 Mix Near Mint AAAA Used Golf Balls
Used golf ballsPackaging may vary from the image
Specs:
Color | White |
Height | 31.93700784144 Inches |
Length | 11.809999987954 Inches |
Number of items | 50 |
Size | Standard |
Weight | 5.25 Pounds |
Width | 7.8699999919726 Inches |
6. Srixon Q Star Tour Golf Balls, White (One Dozen)
- Thin Urethane Cover
- Improved Spin Skin
- Energetic Gradient Growth Core
- 3 Piece Construction
Features:
Specs:
Color | Soft White |
Height | 5 Inches |
Length | 7 Inches |
Number of items | 12 |
Release date | April 2017 |
Size | Dozen (12) |
Weight | 1 Pounds |
Width | 1 Inches |
7. KAEDE 12 Colors Soft Golf Balls, Distance Ball/Practice Balls (One Dozen)
- Exclusive Kacey Musgraves x CAMP Collection unisex fleece Varsity sweatshirt.
- All orders containing this PRE-ORDER item will ship after 12/19.
Features:
Specs:
Color | 12 COLORS |
Height | 1.81 Inches |
Length | 7.48 Inches |
Weight | 1.39 Pounds |
Width | 5.51 Inches |
8. KAEDE Fly Double Colored Distance Golf Balls (One Dozen)(2-Layer)
- No Slip Grip backing provides protection against scratching or marring surfaces and a a more stable and safer cutting guide
- ThumbSaver raised edge design protects your hand while working
- Anodized aerospace aluminum frame for durability
- Precision laser etching on high-visibility orange finish
- Scales to 1/16-in
Features:
Specs:
Color | ORANGE |
Weight | 1.4 Pounds |
9. Wilson Titanium Ball (18 Ball Pack)
- 18-ball pack
- 2-piece construction with explosive titanium core
- Produces maximum energy transfer and distance
- Sturdy, long-lasting Surlyn covers
Features:
Specs:
Color | White |
Height | 3.9 Inches |
Length | 5.6 Inches |
Release date | March 2010 |
Weight | 1.99959271634 Pounds |
Width | 5.4 Inches |
10. Polara Ultimate Straight Self Correcting 2 Piece Golf Balls (1 Dozen)
ADVANCED TECHNOLOGY: Polara Ultimate Straight Self Correcting Golf Balls are for the golfer whose problem is significant and persistent hooking or slicing off the tee. The unique 2-piece construction consists of a central core and an outer cover.HOW IT WORKS: From the tee, point the arrow on the bal...
Specs:
Color | White |
Number of items | 1 |
Size | 1 Dozen |
Weight | 2 Pounds |
11. R&L Glow Golf Balls for Night Sports - Tournament Fluorescent Glowing in The Dark Golf Ball - Long Lasting Bright Luminous Balls
- ✔BRIGHT FLUORESCENT GLOW FOR NIGHTTIME PLAY: Enjoy a game of golf at night with our glow in the dark golf balls. They have a bright fluorescent glow and recharge easily with a UV flashlight or any flashlight.
- '✔REAL GOLF BALLS – NO LED INSIDE: These hit like real golf balls because they ARE real balls and do not have inbuilt LEDs. They are softer than LED night balls and therefore hit like real balls. They will not cut out when hit too hard.
- ✔HIGH PERFORMANCE TOURNAMENT BALLS: Our luminous golf balls are high performance balls utilizing a low compression core and soft urethane skin. They are premium golf balls that have a drive equal to a day time ball.
- ✔DOUBLE FLUORESCENCE LAYERS FOR LONGER BRIGHTNESS: We included two fluorescent layers in our glow in the dark golf balls. This makes them shine brighter and longer than all competing brands.
- ✔PERFECT GIFT IDEA: This is the best gift for your father, business partner, or close friend. Give it on a birthday, father’s day, Christmas, or thanks giving and let them know you appreciate them
Features:
12. KAEDE Pro Double Colored Conforming Distance Golf Ball (One Dozen)(3-Layer)
【Dimple Innovative】The world’s first ‘Kaede’(Japanese: maple) shaped dimple designed by Japanese aerodynamicist【Less Air Resistant & Longer Distance】Deflecting airflow at an angle, reducing air resistant by 18% and increasing ball distance【Conforming Golf Ball】3-layer premium golf ...
13. GOGO 48 Pack White Practice Golf Balls Golf Training Ball 5 Inches
Specs:
Color | White |
Height | 10 Inches |
Length | 10 Inches |
Weight | 0.4 Pounds |
Width | 10 Inches |
14. 50 Titleist Nxt Tour Mix Aaaaa Mint Used Golf Balls
Package length: 12.7 cmPackage width: 21.59 cmPackage height: 35.56 cmProduct Type:RECREATION BALL
Specs:
Color | White |
Number of items | 1 |
Size | Small |
Weight | 6 Pounds |
15. 50 TITLEIST PRO V1X 2014 AAAA Near Mint Used Golf Balls
New soft compression core with ZG process technologyImproved Urethane Elastomer cover system for color and durabilityResponsive ionomeric casing layerSpherically-tiled 328 tetrahedral dimple design
Specs:
Weight | 5 Pounds |
16. 50 Near Mint Titleist Pro V1 AAAA Recycled Used Golf Balls, 50-Pack
Near Mint Grade (AAAA): Slight cosmetic blemishes, but guaranteed game-worthy. Small imperfections like gloss-loss, abrasions and minor discoloration. No cuts or damage that will alter the distance, trajectory or flight path. Player pen markings, and logos can be present.Model years 2013 and earlier...
Specs:
Color | White |
Number of items | 1 |
Size | Small |
Weight | 5 Pounds |
17. Lot 8 Trick Golf Balls Jokes Exploding, Mist, Wobble, Streamer
8 Joke Golf Balls4 - Exploding Golf Balls.2 - Unputtaball Golf Balls1 - Phantom Golf Ball1 - Jet Streamer Golf Ball
Specs:
Height | 4.3 Inches |
Length | 4.6 Inches |
Weight | 0.1 Pounds |
Width | 4.4 Inches |
18. Srixon Q-Star Golf Balls (1-Dozen), Pure White
- SPIN, TRAJECTORY, ACCELERATION AND RESPONSIVENESSThe process of precisely tuning a ball's performance to enhance total playability for every shot
- IMPROVED ENERGETIC GRADIENT GROWTH COREIncreasing the ball's launch characteristics while maintaininggreenside performance
- 324 ADVANCED AERODYNAMIC DIMPLE PATTERNReduced drag providing consistent trajectory, distance control and dispersion with every shot
- The Q-STAR is the perfect combination of distance off the tee and spin control around the green. Coupled with its superior soft feel and visual performance of Pure White and Tour Yellow, the new Q-STAR is our most advanced 2-piece ball to date
Features:
Specs:
Color | Pure White |
Height | 1.75 Inches |
Length | 7.5 Inches |
Number of items | 1 |
Release date | February 2013 |
Weight | 1.2 Pounds |
Width | 5.5 Inches |
19. PrideSports Practice Golf Balls, Hollow, 12 Count
- Lightweight design
- Limited distance reduces retrieval time
- Durable lightweight plastic
- Includes 12 hollow practice balls
Features:
Specs:
Color | White |
Height | 4 Inches |
Length | 12 Inches |
Number of items | 6 |
Release date | December 2011 |
Size | OTH |
Weight | 0.5 Pounds |
Width | 7 Inches |
20. Srixon 2017 Men's Soft Feel Super sleeve (24 Balls), Father's Day Special
Two piece value golf ball for 70+ mile per hour swing speedsEnergetic Gradient growth core) improved Egg. Feels softer while maintaining optimal launch conditions and increasing ball speed344 speed DimplesLonomer cover
Specs:
Color | Green |
Height | 8 Inches |
Length | 6 Inches |
Number of items | 24 |
Release date | October 2017 |
Weight | 2 Pounds |
Width | 4 Inches |
🎓 Reddit experts on golf balls
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where golf balls are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
It honestly depends on your budget, how much are you willing to spend?
Here is a great list of prep and upgrades you can do to bring success to your prints:
-Get Vibration Dampners: I can not express how much joy these things have brought many users. The make your machine quiet and greatly decrease ringing in your prints since they ABSORB the vibration coming from your stepper motors. You really only need Two of these for the X and Y axis however you can get another two for the Z-axis drives if you plan on doing a lot of z-hopping.
-BUY FILAMENT IN ADVANCE: get some PLA/ABS/PETG or whatever you want to try printing with. The filament you get with the printer for the most part is garbage HOWEVER I recommend dialing in those settings first then throwing on some nice filament, it'll feel soooo nice. Some commonly accepted/appreciated brands are: eSun PLA+, Hatchbox, Solutech and more
-Get a PEI sheet: Seems like you mentioned this in your post but PEI sheets eliminate the use of gluesticks/tape/hairspray and provide excelent adhesion while making it easy to remove the part after it's cool. This things like to be hot though so increase your bed temp a little at first
-Buy New Fans: The stock hotend/power unit fans are Loud, Noisy and Inefficient. I recommend getting 1 new conrol box fan, 1 new hot end fan and 1 new part blower fan.
You will need 1 40mm fan, 1 50mm fan and a Blower fan or another 40/50mm fan depending on if you print a new hot end mount like a fang.
-Tighten every screw on the printer: You would be surprised how many screws initially are lose either from prior testing or such. Also make sure to test your belt tensions on your printer whne you get it. You want everything tight BUT NOT TOO TIGHT. Give it a snug fit then let it be. Also make sure your belts are 'pluckable' like a guitar string but not tought
-Get some bearings: You may want to get a few ball bearings for when you print out a new filament holder, the stock filament holder is terrible
-Buy some fasteners: M3 bolts and nuts are commonly used on the CR-10S having spares or additional fasteners for adding on parts/printed components to your printer is awesome to have on hand
-Replace the Hotend: This can get a bit frustrating but it can be worth it. If you want you can replace the hotend with something like a volcano or an all metal hot end to print at higher temperatures. With this you can also add on autoleveling if you have the correct mount printed
-Octoprint: I am not very familiar with octoprint since I don't use it myself however I know it can run on a CR-10S. If you want look into how to install octoprint on stock firmware, I know it's pretty easy to use a raspberrypi to remote into your printer as well using octoprint.
-Squash Feet: Replacing your stock machine 'feet' with squash balls or squishy gold balls can also help absorb vibrations from your machine to your table or where it is located. This helps a bit with part quality but it's mostly to reduce the noise carried through your furniture.
-Solder on connectors: If you want you can get some pin connectors to make your fans/electronics easy to switch out depending on your material you are printing, maybe you need a strong part fan or maybe you need a weaker one. It is easy to swap out if it's using a 4pin connector.
-Make an Enclosure: What could be nicer for your printer than a stable environment. Making an enclosure for your printer can help if you live in a rough climate area or if you want to reduce the noise as well.
-Get some Handtools: I'm not sure if you have any or not but some great tools to have are a screwdriver, hexwrenches and a soldering iron depending on how much work you want to be doing on your printer.
For convenience I've added some of the parts mentioned via an Amazon link for prices. I'm not saying buy these things exactly they are just a starting point for reference:
Nima Vibration Dampners:https://www.amazon.com/Stepper-Rubber-Vibration-Dampers-Printer/dp/B073FRZTDX/
40mm Fan (Noctua Brand): https://www.amazon.com/Noctua-NF-A4x20-FLX-premium-quality-quiet/dp/B072JK9GX6/
Blower Fan (Part Fans):https://www.amazon.com/SoundOriginal-Humidifier-Aromatherapy-Appliances-Replacement/dp/B071WMHNG5/
PEI Sheet/Printer Surface:https://www.amazon.com/CCTREE-Printer-Surface-Creality-300x300mm/dp/B07543KHCT/
Squash Feet: https://www.amazon.com/PrideSports-Practice-Balls-Count-Yellow/dp/B00466W9X0/
M3 Bolts/Nuts:https://www.amazon.com/280Pcs-Grade12-9-Socket-Assortment-Storage/dp/B0742DDLQ1/
Raspberry Pi 3 for Octoprint: https://www.amazon.com/Raspberry-Pi-RASPBERRYPI3-MODB-1GB-Model-Motherboard/dp/B01CD5VC92/
Ball Bearings: https://www.amazon.com/625ZZ-Shielded-Groove-Precision-Bearings/dp/B01LWMT95S/
Hope this helps, have fun tinkering!
I made one back in April and followed these instructions, but used 2 x 3s instead.
I made the holes with a dremel tool with the circle cutter and a cheap net I found on amazon. I used an indoor/outdoor carpet from home depot. Luckily I had most of the material in the shed left over from previous projects, but I'd estimate about $60-$75 for materials. I bought these balls from amazon. My "chipping mats" are left over indoor/outdoor carpet stapled to left over plywood.
What I think about my version: Following the corn hole instructions make it pretty sturdy, even with the 2x3's. However, they are large and somewhat awkward to carry. They aren't easy to transport in my car (mazda3 hatchback), so I am looking to make a lighter version like /u/garzalaw, but maybe have them fold in half with a hinge and lock with a bolt lock for easier transport?
It's a fun game, but challenging if you and your buddies aren't that great at golf (my buddies and myself). I practice with it in the backyard pretty frequently with real balls.
Hi! I actually set one up. It's ghetto as hell but, here is what I did.
This little net is cheap on Amazon.
Then I went to Home Depot and bought a section of astro-turf for about $17. I had an old grommet kit so I put 4 holes about an inch in from the corners and grommeted them. I use old tent stakes to keep it tight on my lawn.
I stacked a welcome mat on top of a large cutting board and slid it under the Astroturf for a solid flat surface.
[Wiffle golf balls.] (https://www.amazon.com/dp/B001RFSTN2/ref=cm_sw_r_cp_apa_x2qRzbG1HV3QH)
I use a lid from a storage container tub as a ball feeder, propped up at the perfect angle by an empty 12oz LeCroix.
Creative lighting and my 60° Mizuno, the little Bose Bluetooth speaker for the Spotifies and I got a pretty fun night going on in my little back yard.
The result: https://imgur.com/a/SMfnQ
I'm a very avid DIY'er but I don't think that price is out of the question nearly to the extent people are complaining about it.
Angle iron (What the stand is made out of), 20$: http://www.homedepot.com/p/Everbilt-1-in-x-96-in-Aluminum-Square-Tube-with-1-20-in-Thick-802537/204273939Edit: It's just more 1x4s, my mistake - total cost below updated (2x @ 4$).Not the shittiest/cheapest you can find Plywood? ~20$: http://www.homedepot.com/p/Sande-Plywood-Common-1-4-in-x-4-ft-x-8-ft-Actual-0-205-in-x-48-in-x-96-in-479023/100073744
Paint - White and Green (Lettering): Seems easy enough to get away with the cheapest stuff here, so: 8$ (2x "Sample Sizes" @ 3.94$ from Home Depot, probably would need 2x "sample sizes" for the white, but I'll stay conservative).
Chipping Matt x2 - ~20$/ea: https://www.amazon.com/s/ref=sr_st_price-asc-rank?keywords=Chipping+Mat&rh=i%3Aaps%2Ck%3AChipping+Mat&qid=1495570282&sort=price-asc-rank - Yes, I know you could buy a set of putting carpet for cheaper and cut it up, but chipping matts are significantly stronger than regular putting green surfaces, and realistically a "good" quality one should cost you at least ~25$.
Turf for the surface (Cheapest available, frankly I feel like theirs seems a little more padded than this, but for the purpose of costs...) ~21$: https://www.amazon.com/GREENSCAPES-209107-Grass-Rug-6-Feet/dp/B00LK2MIFC/ref=sr_1_2?ie=UTF8&qid=1495570789&sr=8-2&keywords=Putting+Turf
1x4s for framing 4$x2 (One for each setup) Edit: : http://www.homedepot.com/p/1-in-x-4-in-x-8-ft-Premium-Kiln-Dried-Square-Edge-Whitewood-Common-Board-914681/100023465
Foam Balls (Lowest quality possible), ~12$ - didn't search too hard, but couldn't find less than a 12ct (And who wouldn't want a few spares with something like this): https://www.amazon.com/PrideSports-Practice-Balls-Count-Yellow/dp/B00466W9X0/ref=sr_1_1?ie=UTF8&qid=1495570456&sr=8-1&keywords=Foam+Golf+Balls
Netting (Cheapest comparable that I found), ~12$: https://www.amazon.com/Lacrosse-Netting-Fishing-Nets-Length/dp/B013W40VS6/ref=sr_1_7?ie=UTF8&qid=1495570637&sr=8-7&keywords=Netting
So all in all we're at 125$ not including any hardware (screws, nuts/bolts, brackets, etc) nor the tools that you might require to assemble the thing. You could also probably safely assume a shipping charge in the range of 20-40$ trying to mail a setup like this.
Sure, the guys making these things are buying in bulk and very likely aren't paying retail, but you would be paying retail prices. Let's also just forget the fact that all of the above doesn't account for any mistakes you might make along the way, requiring re-purchasing goods.
Frankly, I don't think this is a very good DIY project at all.
Edit: You could get away with "Two sheets of plywood" like you said (For the legs, frame, etc), but you'd want to buy much beefier stuff (~1/2" at least, 3/4" preferred): http://www.homedepot.com/p/Sande-Plywood-Common-1-2-in-x-4-ft-x-8-ft-Actual-0-472-in-x-48-in-x-96-in-454532/100017950 - There's also Softwood Ply and Particleboard available, but frankly, I wouldn't touch the stuff (ESPECIALLY the latter) if I had any intention of using these on beaches, etc.
Edit2: Just noticed these things are plastic: https://cdn.shopify.com/s/files/1/1557/3333/products/products_chippo_4_800x.jpg?v=1495158893
Whelp, fuck 'em. Looks like I'll be making my 150$ counterparts instead.
Ok I have a good idea. Get him Golf balls and but them in a gag gift box P.S If I win I would like a gift card so I can save for some supplements and vitamins.
I love these. A friend at work gave me a sleeve two seasons back and I'm still playing them. They're a great ball for a great price -- http://www.amazon.com/Wilson-Staff-Golf-Balls-White/dp/B006M46TDU.
Try these: 50 TITLEIST NXT TOUR MIX AAAAA MINT USED GOLF BALLS https://www.amazon.com/dp/B00PR8UL8G/ref=cm_sw_r_other_awd_Iwb8wb5RWEY19
Or these: 50 TITLEIST PRO V1X 2014 AAAA NEAR MINT USED GOLF BALLS https://www.amazon.com/dp/B00KY62GUM/ref=cm_sw_r_other_awd_Axb8wbWGZ9XWJ
I typically buy the 50 pack of Pro V1x's, and I carry a sleeve of brand new ones. If I'm playing a practice round, or chipping I use the used balls. If I'm putting or playing in the men's league, or any other competitive match I play the new ones.
Typically I go through 4-6 balls a round, even if I don't lose one OB or in the water, I keep my wedge grooves sharp, and the pro V tends to scuff pretty easy with my wedges (although they do spin very well, and I'm learning how to control that).
Usually the 60 or so balls last me the entire year, some of the scuffed balls will go back into the practice ball rotation.
I would highly recommend the Bridgestone line. I play the E6 and love it --- very soft with a putter and forgiving in the air.
Since you're going to lose a bunch, might I suggest this option?
I bought this bag, took the ~20 or so E6's to the course and use the rest as practice balls in my backyard. For you, it's ideal as you won't tell the difference between the various Bridgestones and still have a quality ball everytime.
Before you pull the trigger on the RockBottom deal, make sure you ask them if any of the balls are reconditioned. Those are evidently a POS from all the reviews I've ever read.
Amazon sells used golf balls. If you're interested in ProVs, here's a link for a used 50 pack - https://www.amazon.com/Near-Titleist-Recycled-Balls-50-Pack/dp/B00CK8TBFA/ref=sr_1_3?s=sports-and-fitness&ie=UTF8&qid=1467211941&sr=1-3&keywords=used+golf+balls&refinements=p_89%3ATitleist
I've been playing the Wilson Duo Spin which plays great in my opinion. You can pick them up at Wal-Mart for $26/dozen.
these are awesome joke golf balls. I'm sure he would like to play a prank on his golf buddies.
First, I would stop using birdie balls for anything other than pure fun. Even if you got pretty good at curving them, I'm not sure how well it would translate to a real ball.
If you must use practice balls, I think the hollow, ping pong style balls work the best, and give the best feedback. They're also cheap as shit.
http://www.amazon.com/PrideSports-Practice-Balls-Hollow-Count/dp/B005JTDDAQ
You can really tell when you put a lot of spin on them because they will rise almost straight up in the air, and then drop.
I highly recommend you avoid the foam, or wiffle style, practice balls. They don't work for me at all.
Great deal here on Srixon Soft Feel: Srixon 2017 Men's Soft Feel Super sleeve (24 Balls), Father's Day Special https://www.amazon.com/dp/B01LXLCZ5J/ref=cm_sw_r_cp_api_nNvDzbZP6ZHE6
Amazon has a deal on Srixon Q-star Tours. A dozen for $19.99 plus 50% off if you subscribe and save. They feel like premium golf balls yet have low compression for slower swing speeds. Definitely one of my favorite golf balls for the price.
Srixon Q Star Tour Golf Balls, White (One Dozen) https://www.amazon.com/dp/B01M05B9W0/ref=cm_sw_r_cp_api_i_ym0SCbDRKBPHN
Actually it's $35.19 on Amazon PrimeDay for the KaedePro. Still really cool, i've never heard of these and they look pretty neat.
https://www.amazon.com/dp/B07QQK9CQL/ref=cm_sw_r_cp_api_i_vdElDbY7YQA16?th=1
Edit: they sold out.
I just started playing the Callaway Hexbites after looking at a bunch of alternatives Amazon link
Right now I loose around a sleeve a round and couldn't justify paying for the TP5 and ProV1's I had been playing. Still wanted to get a 3 piece urethane with at least at L-M rating, if not a L-H (First letter is spin off the tee, second is spin around the green USGA ratings) I've been liking them.
​
From lessons I've got the most important thing is to play one ball and get more consistent. I'm a 19 handicap and just go out with my buddies and have really been liking the Callaway can't really beat it at 35 bucks for 2 dozen. Once my handicap drops below 14 (if it ever does) then I'll look to upgrade my ball again.
KAEDE Golf Balls, 12 Colors (One Dozen) https://www.amazon.com/dp/B07GP65L4C/ref=cm_sw_r_cp_api_i_vdElDbY7YQA16
$49 a dozen
Read the reviews, pretty funny, especially the one from “Heather Rando” lol
Something like this:
http://www.amazon.com/Polara-Ultimate-Straight-Correcting-Golf/dp/B004CMRPQO
The possibilities are endless when you loosen restrictions on equipment.
As for rules, most apply to technology but things like stroke and distance on Out of Bounds. Mulligans. I'm not saying I have the answer but creative thinking can be used.
Many on this sub will direct you to Costco to pick up some Kirkland Signature balls, because it's become a fad. Honestly, find some Wilson's or Top Flite's (gasp), those will be the cheapest options that aren't totally unusable.
Personally, I picked up 4 boxes of these Wilson's from Amazon, and they work fine for me. I'm not very good either, so take that for what it's worth. https://www.amazon.com/Wilson-Titanium-Ball-18-Pack/dp/B003BF8NSM/ref=sr_1_2?ie=UTF8&qid=1480688155&sr=8-2&keywords=wilson+golf+ball
I typically buy used AAA balls like callaway or nike which are like $20 for 50 balls and in my experience they have been good enough quality for me. I've been golfing infrequently for several years (I suck) but even though they're used they've been good enough for me
Definitely the Titlist NXT line. It's buttery off of the irons, spins off the wedges, and feels soft off of the putter. It doesn't curve in the air as much as a normal Tour Ball would either, only on command. You can get them for pretty cheap on Amazon. Another good ball is the Bridgstone e6, they feel soft on the irons too. and a cheap back-up ball that iv'e tried is, surprisingly enough, the Wilson Duo, which felt best off of the driver for me, and the feel off of my irons wasn't bad either but i didn't like it for short game that much.
I use foam balls in the basement into a chipping net. Ceilings are only 7 foot so nothing above the waist.
https://www.amazon.com/gp/aw/d/B00466W9X0/ref=mp_s_a_1_1?ie=UTF8&qid=1498452982&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=foam+golf+practice+balls&dpPl=1&dpID=51PTpH3EZIL&ref=plSrch
Also have a birdieball putting green which is nice.
http://www.birdieball.com/create-my-indoor-putting-green/?gclid=CjwKEAjwvr3KBRD_i_Lz6cihrDASJADUkGCaQnbGE7ubvRKTI8DY1O4sC4z9965zxlAMU0gKPGsl4RoChCPw_wcB
Puttout for the win. I use real golf balls for the putting.
https://www.amazon.com/gp/aw/d/B01N9BXYW3/ref=mp_s_a_1_1?ie=UTF8&qid=1498452861&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=puttout&dpPl=1&dpID=41mX8J-rKzL&ref=plSrch
So, I found (late) the Kickstarter for Chippo Golf. I was intrigued. But, when I saw they wanted $175 for the set, I knew I could build something sturdier for much less. So I did.
The total cost of the project was: $93.63 for a much better quality build. You may save more if you have the tools I didn't or scrap laying around.
The Chippo site says that each board measures 40" x 24" x 1.4".
So, I bought one 4' x '4 plywood board for the two boards. I started by ripping it in half, so you'd have two sides that were each 48" x 24". Then, I trimmed the excess off so that each board was 40" x 24". I used a Kreg jig for the entire project, so your mileage may vary in terms of cost and connecting boards.
I bought three (3) 1" x 2" x 10' common boards to use for the sides and the legs. Initially, I bought carriage bolts to use as swinging legs, but that solution didn't work well and I settled on the hinges (more later). I ended up buying an additional 1" x 2" x 8' common board later to redo the legs since I hated the bolt method.
Next, cut your sides to fit. Leave a small lip when you attach the sides so that the grass is flush with the edges once glued. Measure and mark your holes (check out the screen shot for measurements for 6" and 9" holes) and use a jig saw to cut them out.
After that, cut your turf carpet pieces to fit onto each board. I found it helpful to clamp each corner to the board, flip it over, and mark with a silver permanent marker. Then, I just used poultry shears to cut out the circles.
Next, start stapling your cargo net around the holes. Be forewarned, I think the net I bought was slightly too small. Some of the top holes are very taut and the balls can bounce out upon impact. You may use the material better than me, or simply count those shots as in (as we do). Or, buy a slightly bigger net.
After you've stapled all of your netting, use a ton of Gorilla glue and attach your carpet. Put some weight on it (books, etc.) and let it dry overnight.
Then, attach your legs. I initially tried carriage bolts, but I hated how they didn't fold up into the boards and were unbalanced. Hence, the hinge method. Attach the hinges and enjoy your game! Finish as you see fit.
Practice Balls for $5.97 https://www.amazon.com/gp/product/B00466W9X0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Green Turf Rug (2.7" x 8') for $16.68 https://www.amazon.com/gp/product/B01AINQMRI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Cargo Net (41" x 30") for $8.99 https://www.amazon.com/gp/product/B01M8NQK4K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
We have a night golf best ball scramble tournament once a year. Get the rave glow in dark bracelets to mark outer edge of green and put one in the hole. Last year, we switched to a ball that doesn't feel like a rock - since they don't have an LED inside - they should be able to be used multiple times. Since they're lit - you can find these balls much easier than a ball in the bushes during the day.
https://www.amazon.com/Night-Golf-Balls-Glow-Dark/dp/B077WPK8S8.
Wilson-Staff Duo's are pretty good. HERE
These Callaway HexBite's might do the trick, as well.
Good news! You can get him some balls and it'll only cost you $20.99. You better hurry though, there's only 2 left in stock, don't let them run out his birthday is over, it's on the Wishlist.
https://www.amazon.com/dp/B00PR2HRDO/_encoding=UTF8?coliid=I1562PD9A5DLYN&colid=273EHJT6AJ4F5
You can get a dozen for $23 with this link. At that price these things might be interesting enough to try out lol
​
https://www.amazon.com/KAEDE-Double-Colored-Distance-%EF%BC%882-Layer%EF%BC%89/dp/B07QPJH53C/ref=sr_1_3?keywords=KAEDE+Double+Colored+Distance+Golf+Balls&qid=1563290089&s=sporting-goods&sr=1-3
I got these and I was able to see what suited me. I ended up loving the e6 and the treo soft. I would say about half the balls were e6's, maybe 8-10 e5's, 8-10 e7s and treo softs were the rest. Balls were in pretty good condition, there were a few yellowish ones, but didn't affect performance.
Daily Deals
Coupon Codes
Tee Time Coupon Codes
Amazon Deals
Disclaimer
^^^^/u/biggumby ^^^^is ^^^^not ^^^^affiliated ^^^^with, ^^^^nor ^^^^are ^^^^they ^^^^responsible ^^^^for, ^^^^the ^^^^content ^^^^of ^^^^the ^^^^sites ^^^^and ^^^^pages ^^^^of ^^^^any ^^^^online ^^^^merchants. ^^^^I ^^^^do ^^^^not ^^^^promote ^^^^their ^^^^activity. ^^^^/u/biggumby ^^^^makes ^^^^an ^^^^effort ^^^^to ^^^^occasionally ^^^^review ^^^^such ^^^^information, ^^^^however, ^^^^due ^^^^to ^^^^the ^^^^number ^^^^of ^^^^websites ^^^^and ^^^^online ^^^^listings, ^^^^it ^^^^is ^^^^impossible ^^^^to ^^^^ensure ^^^^that ^^^^all ^^^^product ^^^^information ^^^^is ^^^^100% ^^^^accurate. ^^^^If ^^^^you ^^^^find ^^^^a ^^^^website ^^^^that ^^^^has ^^^^questionable ^^^^information, ^^^^please ^^^^contact ^^^^me ^^^^immediately ^^^^so ^^^^that ^^^^I ^^^^can ^^^^attempt ^^^^to ^^^^have ^^^^the ^^^^information ^^^^either ^^^^removed ^^^^or ^^^^updated ^^^^accurately.
If you're in the US, you can get the Tour Preferred (1 generation older than the TP5) on Amazon for about $28. Other good choices would be Srixon Q Star Tour and the Taylormade Project a. There's also a new Project (a) that launched 1-2 weeks ago.
All of the above have urethane covers, which will generally generate more spin on your irons and wedges.
Looks like a yellow practice ball to me, either foam or plastic/whiffle style.
Like these: https://www.amazon.com/PrideSports-Practice-Balls-Count-Yellow/dp/B00466W9X0/ref=lp_3411201_1_4?s=golf&ie=UTF8&qid=1567346853&sr=1-4
I don't know why so many people keep posting that here. Maybe I'm missing something, but it looks like you can buy those on Amazon for $30-50 a dozen, depending on options. So roughly in the same price range between Titleist's TourSoft and ProV1/x.
https://www.amazon.com/KAEDE-Golf-Balls-Colors-Dozen/dp/B07GP65L4C/ref=sr_1_2?keywords=kaede&qid=1563367529&s=gateway&sr=8-2
Not as good as "Almost Golf" balls, but still good and much cheaper.
http://www.amazon.com/PrideSports-Practice-Balls-Count-Yellow/dp/B00466W9X0/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1465231403&sr=1-1&keywords=practice+golf+balls
http://www.amazon.com/Polara-Ultimate-Straight-Correcting-Golf/dp/B004CMRPQO
They actually do work pretty well. They're banned from use in USGA sanctioned tournament play. But I'm guessing you're not playing in too many tournaments as a beginner.
Nope, they work on a pelican though and they are plenty large enough that it should be fine. Wide tolerance range.
https://www.amazon.com/PrideSports-Practice-Balls-Count-Yellow/dp/B00466W9X0/ref=mp_s_a_1_5?keywords=foam+golf+practice+balls&qid=1567631321&s=gateway&sprefix=foam+gol&sr=8-5
Foam Practice Golf Balls
Just need gas in the shell. Shove one of these down the tube, thooomp.
Goes a good distance too.
Looks like these.
Sure thing: https://www.amazon.com/gp/product/B07QPJH53C/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Amazon has Srixon Q-Stars for $12.99/dozen until March 16th supposedly. Just bought 4 dozen to be shipped to my office before the weekend!
http://www.amazon.com/gp/product/B00B1MZ22C?keywords=srixon%20golf%20balls&qid=1453152633&ref_=gb1h_img_m-4_5422_845b76eb&smid=ATVPDKIKX0DER&sr=8-3
Which is even cheaper via that Amazon link.
$43.99 per dozen.
Amazon says these are $24 (2 piece) or $50 (3 piece) per dozen and non-conforming.
For the lazy.
I gave my brother some for Christmas and had about a dozen before my dogs chewed them up.
foam practice balls, like these
I got some for my gf from Amazon
I used foam golfballs in my Malibu Pro Explorer...Like these.
https://www.amazon.com/gp/aw/d/B00466W9X0/ref=mp_s_a_1_2?ie=UTF8&qid=1486598934&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=golf+balls+foam&dpPl=1&dpID=41j2iFRgRkL&ref=plSrch
https://www.amazon.com/KAEDE-Golf-Balls-Colors-Dozen/dp/B07GP65L4C/ref=lp_9997205011_1_1?srs=9997205011&ie=UTF8&qid=1565374430&sr=8-1
http://www.amazon.com/Wilson-Staff-Golf-Balls-White/dp/B006M46TDU/ref=sr_1_1?ie=UTF8&qid=1396363329&sr=8-1&keywords=wilson+staff+duo
I have never used them, but
Here are some real life reviews.
Wilson Titanium Ball (18 Ball Pack) https://www.amazon.com/dp/B003BF8NSM/ref=cm_sw_r_cp_api_4S3-ybPS7QB2X
I'm a beginner and use these. They feel like sand bags, but they're cheap as hell. I still lose a lot, so I'm not ready for $20/dozen yet.