Reddit mentions: The best hacksaw blades
We found 18 Reddit comments discussing the best hacksaw blades. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Bahco 625 Premium Ergonomic Carbide Scraper, 1", with Plastic Holder,Black
- Maximum comfort with minimum effort due to the ergonomic design
- Comfortable 2 component handle giving an excellent grip
- Carbide blades for easy removal of paint, glue, varnish and rust off various surfaces
- Designed for precision work such as windows and mouldings
- Supplied with a 449, 25 mm triangular blade
- Other suitable blades 625-Round,Drop and Pear
Features:
Specs:
Color | Black |
Height | 2 Inches |
Length | 11.5 Inches |
Number of items | 1 |
Size | 1 Inch |
Weight | 0.34833037396 Pounds |
Width | 4.2 Inches |
2. Stanley 15-410 Rod Saw - Carbide Grit Blade, Hacksaw Blade
Tungsten carbide particles enable blade to cut on both forward and reverse strokesStanley - Black & DeckerFits standard hacksaw frameLimited Lifetime WarrantyMakes thin straight cuts in ceramic, hardened steel, cast iron and masonryBlade Length - 10"
Specs:
Height | 0.2 Inches |
Length | 14.5 Inches |
Number of items | 1 |
Weight | 0.05 Pounds |
Width | 1.9 Inches |
3. MK Morse HHBF01 High Tension Hack Saw Frame with Blade
Locking Screw Design allows for storage of extra blades and secures blade for "jab" sawingMultiple Pin Locations for mounting blade at 90° or 45° for standard or flush-cut applicationsTensioning Handle provides extra torque for straighter cuts and longer blade life
Specs:
Color | Multi |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | One Size |
Weight | 1.21 Pounds |
Width | 1 Inches |
4. Bosch 2609256985 Plunge Cut Saw Blade"Aii 65 Apb" 2.6In
- WIDTH: 2.6in
- Plunge cutting depth: 40mm
- Material: bimetal
Features:
Specs:
Height | 9.84 Inches |
Length | 17.72 Inches |
Number of items | 1 |
Width | 15.75 Inches |
5. Bosch 2609256943 Segment Saw Blade"Acz 85 EB" 3.35In
- Diameter: 3.35in
- Cutting out laminate/Parquet E.G. For installing a partition wall
- Material: bimetal
Features:
Specs:
Height | 9.84 Inches |
Length | 17.72 Inches |
Number of items | 1 |
Release date | November 2009 |
Weight | 0.0881849048 Pounds |
Width | 15.75 Inches |
6. Excel Pull Saw Blade, 1-1/4-Inch Deep, 46 Teeth Per Inch
- Made to fit No.16002, No.16005, No.16012
- Size: 1 1/2" Deep. 5 1/2" Long, 46 Teeth/Inch, 12mt
- Made in the USA
- Made to fit #16002, #16005, #16012
- Size: 1 1/2" Deep. 5 1/2" Long, 46 Teeth/Inch, 12mt
- Made in the USA
Features:
Specs:
Height | 1.5 Inches |
Length | 5.5 Inches |
Number of items | 1 |
Weight | 0.05 Pounds |
Width | 0.012 Inches |
7. Zona 35-050 Ultra Thin Razor Saw, 52 TPI.008-Inch Kerf, Blade Length 4-1/2-Inch, Cut Depth 7/16-Inch
- Ultra Thin Kerf Razor Saws are the thinnest razor saws available with blades that are only
- Country Of Origin: United States
- Model Number: 35-050
- Item Package Dimension: 13.0" L x 3.0" W x 1.5" H
Features:
Specs:
Height | 1.5 inches |
Length | 13 inches |
Number of items | 1 |
Weight | 0.1325 Pounds |
Width | 3 inches |
8. Disston E0406181 Remgrit Carbide Grit Rod Saw Blades, Fine Grit, 10 x .100-Inch
Carbide particles bonded to a steel rod that fits on any standard hacksaw frameCuts extremely abrasive materials with no teeth to chip or dull in very tight locationsCarbide grit offers the greatest wear and heat resistance
Specs:
Height | 0.1 Inches |
Length | 10 Inches |
Number of items | 1 |
Weight | 0.02 Pounds |
Width | 0.01 Inches |
9. Starrett KBS1232-2 Bi-Metal Unique High Speed Steel Safe-Flex Hacksaw Frame Blade, 0.025" Thick, 32 TPI, 12" Length x 1/2" Width (Pack of 2)
Bi-Metal Unique Safe-Flex hacksaw frame bladeMade with a patented solid-state diffusion process with 170 percent more high speed steel weld area and ground teethFor reduced blade fracture, faster cutting and longer life32 Teeth per inchMeasures 12-inches length by 1/2-inches width
Specs:
Height | 15.599999984088 Inches |
Length | 0.199999999796 Inches |
Number of items | 2 |
Weight | 0.0881849048 Pounds |
Width | 1.799999998164 Inches |
10. Eclipse All Hard High Speed Steel Hacksaw Blade
- All hard high speed steel, 12Long x 1/2wide x 0.025 thickness; 18 teeth per inch
- Blade is a rigid all hard blade for highly accurate cutting and a long life
- Manufactured entirely from top quality high speed steel, it cuts through all types of alloys and stainless steels
- Each blade is precisely hardened throughout its entire width to give a strong rigid back, ensuring a perfectly straight cut time after time
- For best performance, the workpiece should be clamped to prevent shattering of the blade
Features:
🎓 Reddit experts on hacksaw blades
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where hacksaw blades are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
As an old house lover (and fellow old house owner), I'm begging you to please restore those windows! It can be done!
I'm making this response extra long and detailed since this question comes up from time to time. Hopefully it can be a resource for others.
But I say this as a guy who bought a real wreck of a house where the previous owner had let everything go. We needed to fix all 45 openings at once as part of a major rehab, and after 6 weeks of effort, about $3000 of experimentation (including taking a week off work and hiring two people to help me), I finally gave up and put in vinyl windows. It completely broke my heart, and my house is uglier because of it. But sometimes, an old window is just too far gone to save. But in that process I learned a lot and I'd like to share a few things.
OK, on to your questions.
General resources and tools I found useful:
I have 3 of those, they come in varying widths. Cool story: my wife brought one home for me from work (elderly care facility) and said one of her residents heard I worked on cars and he wanted me to have it. I had one already of a different width and loved it. I asked her why the resident had one. "Oh, he owns the company that makes them." Sure as shit they are made by Innovative Tools International in Cedar Rapids, Iowa!
They are the best thing in the world for steel surfaces but you can shave aluminum with them pretty easy so I use razor blades in holders for that.
Edit to add:
I also have one of these http://www.amazon.com/Bahco-Premium-Ergonomic-Carbide-Scraper/dp/B000288LOW
They are great for oil pan corners where it's impossible to get any other scraper.
I was a DIY noob before I bought my house a few years ago. I'd helped my Dad do stuff as a kid but not loads. My Fein was the first thing I bought after a drill, and I've used it loads.
​
I'd go for a multitool for those jobs. It works fine for cutting pipe, and with one of the longer blades it's great for cutting straight lines, as the blade stays in the cut:
https://www.amazon.co.uk/Bosch-Starlock-Segment-Blade-Multi-Tools/dp/B002IJM4O6/ref=sr_1_15?ie=UTF8&qid=1537611298&sr=8-15&keywords=starlock+blades
https://www.amazon.co.uk/Bosch-Starlock-Plunge-Blade-Multi-Tools/dp/B0053PV9BG/ref=sr_1_9?ie=UTF8&qid=1537611472&sr=8-9&keywords=bosch+starlock
It's great for cutting things around the house, as you can trim things where they are.
With a narrower blade it'll also do curves really nicely. I've got some curved shelves in my kitchen I did with my Fein.
Looking good!
Trim looks good.
Few tips from a "metal worker, who attempts to make things out of wood" tranlation, when I have corner gaps I just us a bigger weld bead or saw dust and glue:
Big Box.
Glue in stages. Ya, it will take a few days.
Day One: trial fit everything (you have that down!)
Day One: Glue the two center upright parts with small horizontal part. Top is fitted dry to confirm everything is square.
Day Two: Now the top piece.
Day Three: Now the end pieces.
Did you use wire nails (headless 22g) or the salt trick on the beveled ends? I love gluing up rabbets, but with vaneer panels you need those 45 degree cuts.
Trim Pieces, a small gap is visible. Make a tiny miter box for just small trim and use a a small hand saw
Still on my wish list (new table saw with this blade).
http://www.rockler.com/rockler-miter-fold-dado-set
Keep on building.
> I have many. The best is a Morse branded one made of heavy-duty aluminum. It's nuke proof. Also, top quality blades are worth it if you learn how to use them correctly. It's the wrong tool for cutting PVC.
Thanks, I'll definitely check Morse out.
Any suggestions or commentary on blades or usage?
As to being the proper tool, I borrowed a PVC cutter from my brother & it was damn near impossible on this PVC. He does irrigation work, so this one is well used & probably meant for thinner walled PVC.
Looks like an attachment to a scraping tool like this (http://www.amazon.com/Bahco-Premium-Ergonomic-Carbide-Scraper/dp/B000288LOW/ref=pd_bxgy_hi_img_y) You can get different shaped blades for different jobs
Just a couple small hand saws (a pull saw and another small saw). I used a random drill bit and some redneck engineering to help me with some pilot holes where needed.
you can also use a blade like this with a hand hacksaw.
Last photo says .4" (I'm assuming diameter), which is a bit big.
Might want to try a chainsaw file. I picked up a set at Harbor Freight that have worked fairly well for a few sets of nocks. Like this. Should note they seem duller now and I keep a brass brush to clean it out, and one broke at the handle from pushing too hard, but that is typical Harbor Freight. There should be something higher quality on Amazon.
I've also seen some use a hacksaw with a rod saw blade like this one, but I haven't used that method myself.
I have many. The best is a Morse branded one made of heavy-duty aluminum. It's nuke proof. Also, top quality blades are worth it if you learn how to use them correctly.
It's the wrong tool for cutting PVC.
https://www.amazon.com/Disston-E0406181-Remgrit-Carbide-100-Inch/dp/B00ESWLB9A/ref=sr_1_1?keywords=carbide+blade+for+coping+saw&link_code=qs&qid=1568286894&sourceid=Mozilla-search&sr=8-1
For under $20, a simple hacksaw with a high pitch blade will work. Or for more get a metal cutting blade for your reciprocating saw.
A dollar and 70 pr blade isn't really enough to make that something to worry about.
Be careful with this though. The wedge action of clippers when used between the mini's feet will spread the legs a bit, which could cause damage or be difficult to correct, depending on the sculpt.
My go to method is to clip around the edges with clippers, removing as much material as possible without deforming the base. Then I saw an X between the feet with a razor saw and then clip away the rest. Then remove material from around the feet with a file and X-Acto knife.
If you want to get REALLY fancy, you can use a Dremel tool and high-speed cutter bit. But you have to be careful...
I just went through this on one room we were refinishing. We needed to completely strip door and window molding (2 of each), 2 doors, and floor molding.
I've used chemical stripers before, but it's been a few years and I wondered if there were any new miracle products, but after reading 100's of reviews I concluded there aren't.
I've used belt, disc and palm sanders a lot (have several boats) and wasn't looking forward to that at all. I've also used heat strippers of various sorts, and that's no picnic, either.
As others have pointed out, in some cases it may be better to just replace the trim. Our house is 80 years old, with plaster on lath walls and I feared that would risk getting down to complete demo to studs given the amount of plaster damage trim removal would incur.
What I finally wound up using mostly was carbide scrapers. I was no stranger to scrapers, but had never used the fancy carbide ones. It still was a long, tedious job, and scrapers require some muscle and a finish sanding, but as bad as it was, it still beat the alternatives by quite a bit.
Scrapers we used:
Bahco 625 Premium Ergonomic Carbide Scraper, 1", with Plastic Holder
http://www.amazon.com/dp/B000288LOW/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Bahco 665 Premium Ergonomic Carbide Scraper, 2-1/2"
http://www.amazon.com/dp/B000288LP6/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Bahco Replacement 625-DROP Carbide Scraper Blade
http://www.amazon.com/dp/B0001P0PJA/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8