Reddit mentions: The best hazardous storage cans
We found 25 Reddit comments discussing the best hazardous storage cans. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Rubbermaid Commercial Structural Foam Stock Tank, 50 Gallon Capacity, Black (Fg424300Bla)
- Seamless construction for outstanding durability
- Five sizes to fit all your watering needs; from 50 gallons up to 300 gallons
- Optional all-plastic anti-siphon float valve provides constant water level
- Measures 51-2/3" x 31" x 12", Made in the USA
Features:
Specs:
Color | Black |
Height | 12.08 Inches |
Length | 63.25 Inches |
Number of items | 1 |
Size | 50 Gallon |
Weight | 0.23 Pounds |
Width | 69 Inches |
2. Eagle U2-51-S Red Galvanized Steel Type II Gas Safety Can with 7/8" Flex Spout, 5 gallon Capacity, 13.5" Height, 12.5" Diameter,Red/Yellow
- Eagle U2-51-S gas safety can is made with no top or side seam and a double interlock no-weld bottom seam
- Made of lead-free, hot-dipped 24-gauge, deep-drawn galvanized steel with baked-on high gloss powder coat finish
- The filler spout and flame arrestors in both openings are non-sparking brass designed for flashback protection
- Features two openings: a pressure-relief spring closing lid for filling, and an actuated pour valve with a 7/8" O.D. flexible metal spout for safer controlled dispensing
- Made in the USA; 100-percent leak tested
Features:
Specs:
Color | Red |
Height | 13.5 Inches |
Length | 12.5 Inches |
Number of items | 1 |
Size | 5 Gallon |
Weight | 8.4 Pounds |
Width | 12.5 Inches |
3. Rubbermaid Commercial FG424300BLA Structural Foam Stock Tank
Oversized drain plug for easy draining and cleaningDurable, weather-resistant structural foamSeamless construction improves durabilityMeasures 41" x 32" x 25"Made in the USA
Specs:
Color | Black |
Height | 24 Inches |
Length | 41 Inches |
Number of items | 1 |
Size | 70 Gallon |
Weight | 24.691773344 Pounds |
Width | 32 Inches |
4. Justrite Galvanized Steel Oily Waste Safety Can
- Galvanized steel oily waste safety can for disposal of fabric soaked with solvents, thinners, and other flammable liquids
- Self-closing lid opens no more than 60 degrees and closes tightly to help prevent accidental ignition and spontaneous combustion
- Round shape and ventilated, elevated bottom allow air to circulate around the can to disperse heat, and help prevent moisture buildup and rust
- Foot-operated treadle-style pedal provides hands-free opening and carrying handle allows can to be moved easily
- Meets Occupational Safety and Health Administration (OSHA) regulations and is certified by FM Global (FM) and Underwriters Laboratories (UL)
Features:
5. Justrite 7150100 Type I Safety Can with Trigger Handle for Flammables, 11.75" Outside Diameter, 16.875" Height, 5 gal, Steel, Red
- Self-closing, leak-proof lid provides safety from spills
- Certified by FM, UL/ULC, and TÜV, safety cans also meet OSHA and NFPA requirements
- Package Weight: 1.0 pounds
- Country of Origin : United States
Features:
Specs:
Color | Red |
Number of items | 1 |
Release date | March 2017 |
Weight | 0.01 Pounds |
6. Eagle UI-20-FS Red Galvanized Steel Type 1 Gasoline Safety Can with Funnel, 2 gallon Capacity, 9.5" Height, 11.25" Diameter
Type I safety can used to store, transport, and dispense flammable liquids safely; comes with a funnel to facilitate filling and pouringMade of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wearFlame ar...
Specs:
Color | Red |
Height | 9.5 Inches |
Length | 11.25 Inches |
Number of items | 1 |
Size | 2 gallon |
Weight | 4.6 Pounds |
Width | 11.25 Inches |
7. Justrite 7150100 Type I Galvanized Steel Flammables Safety Can, 5 Gallon Capacity, Red
- Precision arrester screen stops flashback ignition to reduce fire risks
- Made from high-grade coated steel, each can is tested to guarantee 100% leakproof construction
- Made in: United States
- The tough powder-coat finish resists chemicals and stands up to demands of rigorous use
- Superior chemical resistance
- Precision arrester screen stops flashback ignition to reduce fire risks
- Superior chemical resistance
- Excellent corrosion protection
- Long length for safe insertion of gas nozzle
- Faster liquid flow
Features:
Specs:
Color | Red |
Height | 17 Inches |
Length | 12 Inches |
Number of items | 1 |
Release date | July 2013 |
Size | 5 Gallon |
Weight | 7 Pounds |
Width | 12 Inches |
9. Justrite 7225120 AccuFlow 2.5 Gallon, 11.75" OD x 12" H Galvanized Steel Type II Red Safety Can With 5/8" Flexible Spout
- Color coding avoids accidents
- Package Dimensions: 32.766 H x 30.48 L x 30.48 W (centimeters)
- Stainless steel flame arrestor prevents flashback ignition
- Large ID zone permits user labeling of contents to avoid misuse
Features:
Specs:
Color | Red |
Height | 13.5 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | 2.5 Gallon |
Weight | 7.8 Pounds |
Width | 0 Inches |
10. Justrite Just Rite 6 Gallon Oily Waste Can
- Lead-free, galvanized steel construction with elevated bottom for circulation of air
- Self-closing lid is operated with the included foot lever and opens no more than 60 degrees
- Powder-coat paint finish
- Red; 6-gallon capacity
- OSHA-compliant
Features:
Specs:
Color | Red |
Height | 15.9 Inches |
Length | 11.9 Inches |
Number of items | 1 |
Size | 15.9" |
Weight | 1.1 Pounds |
Width | 11.9 Inches |
🎓 Reddit experts on hazardous storage cans
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where hazardous storage cans are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I'm not sure how much advice you need, so I'll give you a round-up since it sounds like you aren't too familiar with your redfoot yet - forgive me if I'm overstepping here. (Number one question, are you sure it's a redfoot?)
Ours is only about 6 inches long/4.5 inches wide and, since we keep her in an apartment for now, she lives inside one of these stock tubs:
https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Capacity/dp/B000NPBLAU/ref=pd_sbs_86_1?_encoding=UTF8&psc=1&refRID=V0HHMQZ2AWZY19SQXZY2
Depending on just how big yours is, it wouldn't be the worst idea to stick with the kiddie pool indoors - but if it were me, depending on her size, I would try to get a second pool, cut some of the walls out, and try to make one big/long pool. If she's as big as I envision, the ideal situation would be that she gets at least half of a small bedroom. ;)
She'll need some flooring/substrate in there, and you'll want to have some UV lamps and a heat lamp suspended above his home (there is some good advice about these three elements on this page: http://tortoiseyard.com/creating_a_home_for_your_redfoot_tortoise.htm). You might need to construct something out of wood or metal to hang these lights from. If there's a reptile store anywhere near you you might give them a call or visit to see if they have any suggestions, too.
She's also going to need a soaking/drinking dish. She should be able to climb in and out of the dish pretty easily, and it should be deep enough to soak in without having to submerge her face or strain her neck. Keep the water pretty clean cause she'll drink out of it too (ours likes to poop in the water so keep an eye out for that). Soaking is very important!
They also really like moderately high humidity (being a tropical/subtropical tortoise), so I have a reptile fogger (a glorified humidifier) that pipes in steam to the tank. Too much or too little is problematic, but if the air in your home is dry this is definitely a must-have, and you can figure out what's best as you go.
Do you have feeding under control? Stay away from pellet food unless you're really desperate and go for diet as described here (http://redfoottortoise.com/redfoot_tortoise_diet.htm) and here (http://tortoiseyard.com/diet.htm). Try to keep uneaten food out of the cage lest you attract bugs. Get him some cuttlebones (just search it on Amazon) and leave it in his cage - replace it when you see it has been eaten!
That's what I use with my fish tank and it holds up just fine! Just stain the wood so it is resistant to water and makes it look nice.
That is pretty expensive for a grow bed. For less than half the price, you can get a 50gal Rubbermaid and I highly recommend these. They are very sturdy; I use a 100gal tank for my fish. The 50gal would be perfect as grow beds! I hope this helps and PM me if you have anymore questions!
https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Capacity/dp/B000NPBLAU/ref=pd_cp_86_4?_encoding=UTF8&pd_rd_i=B000NPBLAU&pd_rd_r=44Z6EA7S35DBH8QY2BAX&pd_rd_w=P69qT&pd_rd_wg=4Gx0M&psc=1&refRID=44Z6EA7S35DBH8QY2BAX
This gas can is way better. Great gift for my dad who was always complaining about not being able to find a decent gas can anymore.
I was considering one of these but the sides were just not tall enough. I went with one of these instead and it was perfect.
https://www.amazon.com/gp/product/B000NPBLAU/
Hmm, quite the predicament. Here is a solution that might work for you (this is for the goldfish)- go to a local hardware store or tractor supply or landscape store and try to find an all purpose tub, storage tote, or practically any large container, somewhere around 30-50 gallons. Most of these tubs are fish safe, and are very cheap. For filtration use a large sponge filter and pump which are a very cheap and a effective alternative to normal filters. I wouldn’t worry about heat at the moment as this is meant to be temporary, and goldfish can handle it briefly. I wouldn’t but any decorations or substrate in the tub, just leave it bare. This setup is actually widely used in the goldfish hobby, so it’s a great choice.
Here’s the supplies list on amazon for your convenience, but keep in mind you could also go and look for these products cheaper elsewhere and don’t have to be the exact ones
Sponge filter-
Bacto-Surge High Density Foam Filter https://www.amazon.com/dp/B00GOFPX9I/ref=cm_sw_r_cp_api_i_D0G6AbC8B1HRS
Pump-
VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump For Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord https://www.amazon.com/dp/B00EWENKXO/ref=cm_sw_r_cp_api_i_J2G6Ab01249QW
Air tube-
Penn Plax Airline Tubing for Aquariums –Clear and Flexible Resists Kinking, 25 Feet Standard https://www.amazon.com/dp/B0002563MW/ref=cm_sw_r_cp_api_i_l3G6AbXFY7BEV
Plastic Tub-
Rubbermaid Commercial FG424300BLA Structural Foam Stock Tank, 50 Gallon Capacity https://www.amazon.com/dp/B000NPBLAU/ref=cm_sw_r_cp_api_i_U5G6Ab4CHSP90
Cycling biology-
Fluval Biological Enhancer for Aquarium, 8.4-Ounce https://www.amazon.com/dp/B00FPIZ8Y0/ref=cm_sw_r_cp_api_i_26G6AbAR5QBRK
Lookin Great!
But that little bucket will quickly get clogged / problematic.
I might recommend something like this or this. You can easily add a bulkhead fitting and give yourself a way to have the water spill back in the pond. Then you pack a few mint / horsetail / lizard tail in there and you won't have much of a water clarity problem at all.
Too much plant filtration is just right.
PS. this is a great product as well, but you can't fit as many plants in it. 1 pot of mint would do wonders tho.
There are some nice metal jerry cans out there, but people often complain about the plastic spouts they include. Folks on Amazon seem quite pleased with this one by Eagle.
If you want something buy it for life, get one of these industrial safety cans, you can always repaint it if you don't like the bright emergency color. these things are awesome, way heavy duty, the pedal mechanism will outlast any regular home kitchen can by 50x.
http://www.amazon.com/Justrite-Galvanized-Safety-Gallons-Capacity/dp/B0076NILQE/ref=sr_1_1?ie=UTF8&qid=1343926893&sr=8-1&keywords=safety+trash+can
If your willing to deal with the one time expense get a metal can with a funnel like this. The funnel stays in place and the lid is closed by a simple spring. You just pull the spring back and pour.
I have several of these that I use for storage. They are built well. My only real complaint is that they are round, I would prefer a rectangular shape for easier storage.
I prefer the metal cans over plastic. I just bought one of these metal safety cans for just a little more than the one you linked.
I have NATO cans on my list but as you say they are expensive and I have several other big ticket items in my to buy queue.
During my research when I thought I was going to adopt some turtles I stumbled across some people using big cattle troughs for them. They’re much cheaper per gallon than an aquarium, and wide rather than tall. Basically a small pond. Just throwing it out there since the size of tank they eventually need can be really expensive.
The one I was eyeing: https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Stock/dp/B07B5Q2THW
Not super cheap but a legit option:
This can works well.
It's also important to understand why rags catch fire. It is a chemical reaction so even if it is cold in your shop they can catch fire.
A clothesline with clothespins is another great budget option.
Once they have cured off/dried hard they can go the regular trash without concern.
This is what you want
I have a Justrite safety can and it doesn’t leak fumes or spray or spill all over when pouring. Don’t even smell gas in the car when transporting back home from the station after filling up.
https://www.amazon.com/dp/B003PGRR48/ref=cm_sw_r_cp_api_i_si1CDbB708QZE
You can buy rags specifically meant to soak up paint at a hardware store, and store them in a metal container once they've been used before disposing of them (or just pin them up outside to air out before reusing them). Old shirts and socks work, too.
I got sick of those, since all the ones I could find for sale were like that. Ended up getting a proper metal can, and don't have any problems now. Put spout into thing, squeeze handle, get gas into thing.
https://www.amazon.com/gp/product/B000BQO15I
I was hoping to get away with just a nest box. I will use one of these down the line though if I run into the female having bad egg cycles.
https://www.amazon.com/gp/product/B000NPBLAU/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
At work we use a steel safety can, however it's overkill and a bit pricey for a home shop.
You shouldn't throw it in the trash - if you live in a city, there's probably an E-waste/Household hazardous waste program that will take it. You can collect it and dispose of it with your dead batteries, broken electronics, etc.