Reddit mentions: The best hazardous storage equipment
We found 55 Reddit comments discussing the best hazardous storage equipment. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 17 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Rubbermaid Commercial Structural Foam Stock Tank, 50 Gallon Capacity, Black (Fg424300Bla)
- Seamless construction for outstanding durability
- Five sizes to fit all your watering needs; from 50 gallons up to 300 gallons
- Optional all-plastic anti-siphon float valve provides constant water level
- Measures 51-2/3" x 31" x 12", Made in the USA
Features:
Specs:
Color | Black |
Height | 12.08 Inches |
Length | 63.25 Inches |
Number of items | 1 |
Size | 50 Gallon |
Weight | 0.23 Pounds |
Width | 69 Inches |
2. Eagle 1601MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 30 gallon Capacity, 28.5" Height, 21.25" Diameter
- Lab pack drum comes with a plastic lid and can be used to store, transport, and dispose of small, intact containers of hazardous materials and help contain spills
- Made of blue HDPE, which weighs less than steel, is resistant to dents, punctures, and certain chemicals, and may be incinerated
- Metal lever-lock ring can be used to secure the lid to the drum
- Has 30-gallon storage capacity; weighs 15 lb.; measures approximately 28-1/2" high and 21-1/4" in diameter
- Meets DOT regulation 173.12 and UN standards concerning the packaging and shipping of hazardous materials
Features:
Specs:
Color | Blue |
Height | 28.5 Inches |
Length | 21.25 Inches |
Number of items | 1 |
Size | 28.5" Height, 21.25" Diameter |
Weight | 14 Pounds |
Width | 21.25 Inches |
3. Eagle 1654 Yellow Blow-Molded HDPE Salvage Drum with Metal Ring Lever-Lock Lid, 20 gallon Capacity, 21" Height, 21" Diameter
- Salvage drum includes plastic lid and can be used to store, transport, and dispose of small containers of hazardous materials and help contain spills
- Made of yellow HDPE, which weighs less than steel, is resistant to dents, punctures, and certain chemicals, and may be incinerated
- Metal lever-lock ring can be used to secure lid to drum; closed-cell foam gasket helps prevent leaks
- Has 20-gallon storage capacity; weighs 15 lb.; measures approximately 21" high and 21" in diameter. Inside Dimensions - 19 (48.3cm) Top x 16 5/16 (41.4cm) Bottom x 19 (48.3cm) Height inches
- Meets DOT regulation 173.3, HM-181, and UN standards concerning the packaging and shipping of hazardous materials; has passed a leakproofness test of 3 psig
Features:
Specs:
Color | Yellow |
Height | 21 Inches |
Length | 21 Inches |
Number of items | 1 |
Weight | 0.01 Pounds |
Width | 21 Inches |
4. Eagle U2-51-S Red Galvanized Steel Type II Gas Safety Can with 7/8" Flex Spout, 5 gallon Capacity, 13.5" Height, 12.5" Diameter,Red/Yellow
- Eagle U2-51-S gas safety can is made with no top or side seam and a double interlock no-weld bottom seam
- Made of lead-free, hot-dipped 24-gauge, deep-drawn galvanized steel with baked-on high gloss powder coat finish
- The filler spout and flame arrestors in both openings are non-sparking brass designed for flashback protection
- Features two openings: a pressure-relief spring closing lid for filling, and an actuated pour valve with a 7/8" O.D. flexible metal spout for safer controlled dispensing
- Made in the USA; 100-percent leak tested
Features:
Specs:
Color | Red |
Height | 13.5 Inches |
Length | 12.5 Inches |
Number of items | 1 |
Size | 5 Gallon |
Weight | 8.4 Pounds |
Width | 12.5 Inches |
5. Eagle 1656MBBG Straight-Sided Drum with Metal Band and Plastic Lid with Bungs, 55 gal, Blue
55 gallon Lab Pack Open head Drum Straight-sided with Plastic Bung Lid and Metal Lever-Lock ring Blue HDPE UN Rated for solidsConstructed of blue blow-molded high-density polyethylene (HDPE) with UV inhibitors, is durable and lightweight, weather and chemical resistant White Bung Lid with metal leve...
Specs:
Color | Blue |
Height | 37 Inches |
Length | 21 Inches |
Number of items | 1 |
Width | 23 Inches |
6. Rubbermaid Commercial FG424300BLA Structural Foam Stock Tank
Oversized drain plug for easy draining and cleaningDurable, weather-resistant structural foamSeamless construction improves durabilityMeasures 41" x 32" x 25"Made in the USA
Specs:
Color | Black |
Height | 24 Inches |
Length | 41 Inches |
Number of items | 1 |
Size | 70 Gallon |
Weight | 24.691773344 Pounds |
Width | 32 Inches |
7. Justrite Galvanized Steel Oily Waste Safety Can
- Galvanized steel oily waste safety can for disposal of fabric soaked with solvents, thinners, and other flammable liquids
- Self-closing lid opens no more than 60 degrees and closes tightly to help prevent accidental ignition and spontaneous combustion
- Round shape and ventilated, elevated bottom allow air to circulate around the can to disperse heat, and help prevent moisture buildup and rust
- Foot-operated treadle-style pedal provides hands-free opening and carrying handle allows can to be moved easily
- Meets Occupational Safety and Health Administration (OSHA) regulations and is certified by FM Global (FM) and Underwriters Laboratories (UL)
Features:
8. Justrite 7150100 Type I Safety Can with Trigger Handle for Flammables, 11.75" Outside Diameter, 16.875" Height, 5 gal, Steel, Red
- Self-closing, leak-proof lid provides safety from spills
- Certified by FM, UL/ULC, and TÜV, safety cans also meet OSHA and NFPA requirements
- Package Weight: 1.0 pounds
- Country of Origin : United States
Features:
Specs:
Color | Red |
Number of items | 1 |
Release date | March 2017 |
Weight | 0.01 Pounds |
9. Eagle UI-20-FS Red Galvanized Steel Type 1 Gasoline Safety Can with Funnel, 2 gallon Capacity, 9.5" Height, 11.25" Diameter
Type I safety can used to store, transport, and dispense flammable liquids safely; comes with a funnel to facilitate filling and pouringMade of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wearFlame ar...
Specs:
Color | Red |
Height | 9.5 Inches |
Length | 11.25 Inches |
Number of items | 1 |
Size | 2 gallon |
Weight | 4.6 Pounds |
Width | 11.25 Inches |
10. Justrite 7150100 Type I Galvanized Steel Flammables Safety Can, 5 Gallon Capacity, Red
- Precision arrester screen stops flashback ignition to reduce fire risks
- Made from high-grade coated steel, each can is tested to guarantee 100% leakproof construction
- Made in: United States
- The tough powder-coat finish resists chemicals and stands up to demands of rigorous use
- Superior chemical resistance
- Precision arrester screen stops flashback ignition to reduce fire risks
- Superior chemical resistance
- Excellent corrosion protection
- Long length for safe insertion of gas nozzle
- Faster liquid flow
Features:
Specs:
Color | Red |
Height | 17 Inches |
Length | 12 Inches |
Number of items | 1 |
Release date | July 2013 |
Size | 5 Gallon |
Weight | 7 Pounds |
Width | 12 Inches |
12. Justrite 7225120 AccuFlow 2.5 Gallon, 11.75" OD x 12" H Galvanized Steel Type II Red Safety Can With 5/8" Flexible Spout
- Color coding avoids accidents
- Package Dimensions: 32.766 H x 30.48 L x 30.48 W (centimeters)
- Stainless steel flame arrestor prevents flashback ignition
- Large ID zone permits user labeling of contents to avoid misuse
Features:
Specs:
Color | Red |
Height | 13.5 Inches |
Length | 0 Inches |
Number of items | 1 |
Size | 2.5 Gallon |
Weight | 7.8 Pounds |
Width | 0 Inches |
14. Eagle 55-Gallon Plastic Drum - Straight - Yellow
Material: 100% blow-molded high-density polyethyleneCapacity: 55 gallonsOverall Dia.xH: 21x36-3/8"Meets FDA 21 CFR 177.1520 food grade compliance
Specs:
Height | 36 Inches |
Length | 22.5 Inches |
Number of items | 1 |
Weight | 23.5 Pounds |
Width | 22.5 Inches |
15. Eagle Steel Safety Gas Can 5 gal.
- Its wedding season time! from betty beauty Shower Bridal Wedding Favors! The most creative bridal shower gifts to get and so fun to give away to your bridesmaids.
- Mix n Match our specially formulated safe hair color dye kits FUN pink, BRIDAL blue, LOVE red, SEXY betty BEST Shower gifts/Wedding favors and for the Bride
- Something Old, Something New, Something BRIDAL betty LOVE betty, FUN betty. Happy Honeymoon Night SEXY betty get your betty ready!
Features:
Specs:
Height | 13.5 Inches |
Length | 12.5 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 7 Pounds |
Width | 12.5 Inches |
16. Justrite Just Rite 6 Gallon Oily Waste Can
- Lead-free, galvanized steel construction with elevated bottom for circulation of air
- Self-closing lid is operated with the included foot lever and opens no more than 60 degrees
- Powder-coat paint finish
- Red; 6-gallon capacity
- OSHA-compliant
Features:
Specs:
Color | Red |
Height | 15.9 Inches |
Length | 11.9 Inches |
Number of items | 1 |
Size | 15.9" |
Weight | 1.1 Pounds |
Width | 11.9 Inches |
17. Eagle 1610MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 14 gallon Capacity
- Lab pack drum comes with a plastic lid and can be used to store, transport, and dispose of small, intact containers of hazardous materials and help contain spills
- Made of blue HDPE, which weighs less than steel, is resistant to dents, punctures, and certain chemicals, and may be incinerated
- Metal lever-lock ring can be used to secure the lid to the drum.Maximum Capacity:220 pounds. Inside Dimensions - 13 1/2 (34.3cm) Top, 12 3/8 (31.4cm) Bottom, 25 (63.5cm) Height inches
- Has 14-gallon storage capacity; weighs 10 lb.; measures approximately 26-1/2" high and 15 in diameter top and 12 3/4 in diameter bottom
- Meets DOT regulation 173.12 and UN standards concerning the packaging and shipping of hazardous materials
Features:
Specs:
Color | Blue |
Height | 26.5 Inches |
Length | 15 Inches |
Number of items | 1 |
Weight | 10 Pounds |
Width | 15 Inches |
🎓 Reddit experts on hazardous storage equipment
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where hazardous storage equipment are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I'm not sure how much advice you need, so I'll give you a round-up since it sounds like you aren't too familiar with your redfoot yet - forgive me if I'm overstepping here. (Number one question, are you sure it's a redfoot?)
Ours is only about 6 inches long/4.5 inches wide and, since we keep her in an apartment for now, she lives inside one of these stock tubs:
https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Capacity/dp/B000NPBLAU/ref=pd_sbs_86_1?_encoding=UTF8&psc=1&refRID=V0HHMQZ2AWZY19SQXZY2
Depending on just how big yours is, it wouldn't be the worst idea to stick with the kiddie pool indoors - but if it were me, depending on her size, I would try to get a second pool, cut some of the walls out, and try to make one big/long pool. If she's as big as I envision, the ideal situation would be that she gets at least half of a small bedroom. ;)
She'll need some flooring/substrate in there, and you'll want to have some UV lamps and a heat lamp suspended above his home (there is some good advice about these three elements on this page: http://tortoiseyard.com/creating_a_home_for_your_redfoot_tortoise.htm). You might need to construct something out of wood or metal to hang these lights from. If there's a reptile store anywhere near you you might give them a call or visit to see if they have any suggestions, too.
She's also going to need a soaking/drinking dish. She should be able to climb in and out of the dish pretty easily, and it should be deep enough to soak in without having to submerge her face or strain her neck. Keep the water pretty clean cause she'll drink out of it too (ours likes to poop in the water so keep an eye out for that). Soaking is very important!
They also really like moderately high humidity (being a tropical/subtropical tortoise), so I have a reptile fogger (a glorified humidifier) that pipes in steam to the tank. Too much or too little is problematic, but if the air in your home is dry this is definitely a must-have, and you can figure out what's best as you go.
Do you have feeding under control? Stay away from pellet food unless you're really desperate and go for diet as described here (http://redfoottortoise.com/redfoot_tortoise_diet.htm) and here (http://tortoiseyard.com/diet.htm). Try to keep uneaten food out of the cage lest you attract bugs. Get him some cuttlebones (just search it on Amazon) and leave it in his cage - replace it when you see it has been eaten!
You could spend $25 on a trash can and maybe $5-10 on stuff trying to get it to seal.
Or you could spend $55 on an HDPE drum with the seal built in.
I'd look up what your can is made out of, reference this to see if it is safe. Also what temps it can hold. I like HDPE because I can dump hot liquid in it without worry.
But really, sealing isn't that necessary. Keep bugs out, but that's really it. No oxidation concerns. More on infections later.
As far as heat, I wouldn't worry. Many of the esters and phenols created from hot fermentation will be cut out with your early heads. It's really not a big issue. But 70-80f would be great for whiskey, and and I wouldn't expect it to get any higher even with the thermal mass of 20-25 gallons.
And sanitation... Well. I don't really worry too much. I spray my fermenter down with water and store it open, upside down. No sanitizer, not really necessary. But if you really want, spraying starsan should be fine. Mild infections are good for complexity though, so a lot of people skip it.
I did recently get a bit of mold when I stored it incorrectly and had some liquid... Whoops. Luckily HDPE can be bleached.
That's what I use with my fish tank and it holds up just fine! Just stain the wood so it is resistant to water and makes it look nice.
That is pretty expensive for a grow bed. For less than half the price, you can get a 50gal Rubbermaid and I highly recommend these. They are very sturdy; I use a 100gal tank for my fish. The 50gal would be perfect as grow beds! I hope this helps and PM me if you have anymore questions!
https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Capacity/dp/B000NPBLAU/ref=pd_cp_86_4?_encoding=UTF8&pd_rd_i=B000NPBLAU&pd_rd_r=44Z6EA7S35DBH8QY2BAX&pd_rd_w=P69qT&pd_rd_wg=4Gx0M&psc=1&refRID=44Z6EA7S35DBH8QY2BAX
https://www.amazon.com/gp/aw/d/B0025QI4XC/ref=yo_ii_img?ie=UTF8&psc=1
Here is the container. It's definitely air tight, and very durable and thick. Can't beat the price, free shipping with Amazon prime. I think, including everything, the ingredients were more expensive than the whole setup lol.
This gas can is way better. Great gift for my dad who was always complaining about not being able to find a decent gas can anymore.
I had to do a double take to check that I didn't post this last night without remembering.
I am going through this same process with the 10x14 attic space above our bedroom. I started off with Plan B and tried a few different methods. Filter bags filled up much too quickly and would have been expensive but they did a great job of containing the mess. I have a Dust Deputy attached to my vacuum which helped, but inevitably, the shopvac would get clogged with insulation that made it out of the vortex. My most recent adaptation was to attach the dust deputy to the top of a 40 gallon airtight drum I bought from amazon and then use some old pantyhose around the shopvac filter. This greatly extends my times between either emptying the shopvac or emptying the 40 gallon barrel. Inevitably the shopvac gets filled first but the pantyhose does a great job of keeping the filter in usable shape.
I did buy a Toro leaf blower/vacuum and it worked well but I didn't have an airtight container at the time so the fine insulation would just blow out from under the lid of the trash can I was using. If you have ANY holes in the tubing, you will have a dusty mess on your hands. I plan on retrying this method on the remainder of my attic in the next couple of weeks. If/when it doesn't work adequately, I will buy some insulation bags from Amazon and that should finish the job for me.
https://www.amazon.com/Deputy-Standalone-Anti-Static-Cyclone-Separator/dp/B002JP315K/ref=sr_1_1?ie=UTF8&qid=1496112200&sr=8-1&keywords=dust+deputy
https://www.amazon.com/Eagle-1601MB-Polyethylene-Lever-lock-Capacity/dp/B0025QI4XC/ref=pd_sim_328_2?_encoding=UTF8&pd_rd_i=B0025QI4XC&pd_rd_r=TWYG0J54TB8HRJBXHVX3&pd_rd_w=L9VJ6&pd_rd_wg=DlIiD&psc=1&refRID=TWYG0J54TB8HRJBXHVX3
I'm not going to try this(or I might) but I think if you daisy chained two dust deputies and two drums, you would be absolutely fine with a shopvac.
I also made the mistake of failing to consider the difficult in mixing the Green Fiber cellulose bales without their machine once I had removed the old insulation. I only needed 7 bags for above our bedroom but man was that a PITA. I used a concrete mixer attached to my battery powered drill and managed to get in a great rhythm but having the machine would have been a million times easier.
I was considering one of these but the sides were just not tall enough. I went with one of these instead and it was perfect.
https://www.amazon.com/gp/product/B000NPBLAU/
Hmm, quite the predicament. Here is a solution that might work for you (this is for the goldfish)- go to a local hardware store or tractor supply or landscape store and try to find an all purpose tub, storage tote, or practically any large container, somewhere around 30-50 gallons. Most of these tubs are fish safe, and are very cheap. For filtration use a large sponge filter and pump which are a very cheap and a effective alternative to normal filters. I wouldn’t worry about heat at the moment as this is meant to be temporary, and goldfish can handle it briefly. I wouldn’t but any decorations or substrate in the tub, just leave it bare. This setup is actually widely used in the goldfish hobby, so it’s a great choice.
Here’s the supplies list on amazon for your convenience, but keep in mind you could also go and look for these products cheaper elsewhere and don’t have to be the exact ones
Sponge filter-
Bacto-Surge High Density Foam Filter https://www.amazon.com/dp/B00GOFPX9I/ref=cm_sw_r_cp_api_i_D0G6AbC8B1HRS
Pump-
VicTsing 80 GPH (300L/H, 4W) Submersible Water Pump For Pond, Aquarium, Fish Tank Fountain Water Pump Hydroponics with 5.9ft (1.8M) Power Cord https://www.amazon.com/dp/B00EWENKXO/ref=cm_sw_r_cp_api_i_J2G6Ab01249QW
Air tube-
Penn Plax Airline Tubing for Aquariums –Clear and Flexible Resists Kinking, 25 Feet Standard https://www.amazon.com/dp/B0002563MW/ref=cm_sw_r_cp_api_i_l3G6AbXFY7BEV
Plastic Tub-
Rubbermaid Commercial FG424300BLA Structural Foam Stock Tank, 50 Gallon Capacity https://www.amazon.com/dp/B000NPBLAU/ref=cm_sw_r_cp_api_i_U5G6Ab4CHSP90
Cycling biology-
Fluval Biological Enhancer for Aquarium, 8.4-Ounce https://www.amazon.com/dp/B00FPIZ8Y0/ref=cm_sw_r_cp_api_i_26G6AbAR5QBRK
Lookin Great!
But that little bucket will quickly get clogged / problematic.
I might recommend something like this or this. You can easily add a bulkhead fitting and give yourself a way to have the water spill back in the pond. Then you pack a few mint / horsetail / lizard tail in there and you won't have much of a water clarity problem at all.
Too much plant filtration is just right.
PS. this is a great product as well, but you can't fit as many plants in it. 1 pot of mint would do wonders tho.
You're going to pay like a thousand bucks for that much bubble solution, plus shipping and handling. My advice would be to pick up an empty drum, a couple of buckets of liquid detergent, and a gallon of glycerin; and make it yourself in your back yard. You'd be looking at more like $250 plus shipping (particularly, you're going to save S&H on 400 pounds of water). There's lots of recipes online but you'd generally be looking at 1 part detergent to 6-8 parts water, and 1 part glycerin to 12-16 parts detergent.
There are some nice metal jerry cans out there, but people often complain about the plastic spouts they include. Folks on Amazon seem quite pleased with this one by Eagle.
I've noticed that before, I believe it's the edge of the pit and they were trying to make the outer lip of a salvage drum top look like bone. This is photo of a salvage drum and its outer plastic lip can be seen along its metal ring:
https://www.amazon.com/Eagle-1654-Blow-Molded-Lever-Lock-Capacity/dp/B000LDEP0C
More of the lip section is shown from 10:40 to 11:00 and then from 11:09 to 11:14. The melted plastic can be seen on the lower piece from 11:20 to 11:24 then again 11:31. At 11:31, inside the lipped section, the raised support sections are visible. If you look to the right side of Exhibit 175, to the left of the wire pile & seat remains, you'll find the outer metal ring of the drum:
http://www.stevenaverycase.org/wp-content/uploads/2017/03/Dassey-Exhibit-175.jpg
The outer metal ring also appears in Exhibit 169:
https://www.amazon.com/Eagle-1654-Blow-Molded-Lever-Lock-Capacity/dp/B000LDEP0C
If you want something buy it for life, get one of these industrial safety cans, you can always repaint it if you don't like the bright emergency color. these things are awesome, way heavy duty, the pedal mechanism will outlast any regular home kitchen can by 50x.
http://www.amazon.com/Justrite-Galvanized-Safety-Gallons-Capacity/dp/B0076NILQE/ref=sr_1_1?ie=UTF8&qid=1343926893&sr=8-1&keywords=safety+trash+can
Ya it's pretty thin for most dust collection. You could always buy the galvanized metal can which would be beefy and not too expensive. There's a HDPE one I bought which is around $35 on Amazon but is probably like x5 the thickness and no issue with the 3HP DC system. https://www.amazon.com/gp/product/B000LDEP0C/
I think eventually I might upgrade to something like this. Larger and the plastic seems thicker.
https://www.amazon.com/Eagle-Polyethylene-Lever-Lock-Capacity-Diameter/dp/B0026GO5CA/ref=sr_1_3?keywords=Eagle%2B1610mb&qid=1555340703&s=hi&sr=1-3&th=1
If your willing to deal with the one time expense get a metal can with a funnel like this. The funnel stays in place and the lid is closed by a simple spring. You just pull the spring back and pour.
I have several of these that I use for storage. They are built well. My only real complaint is that they are round, I would prefer a rectangular shape for easier storage.
I believe the cyclone dust collector recommends a container >90 mil. I've been looking to set up a dust collector my self and was thinking of using this or this one. If you look at the comments you'll see photos of other peoples set ups.
The blumats have a 30gal resevoir with a pH controller. This has basically cut my weekly work in half. I just top off the res every couple weeks.
That's a 3x3 tray, so that leaves 6 inches on all sides for some pavers to hold up those shelves. I use a transfer pump and wand to feed from 5gal buckets and then pump the runoff out of the tray back into a bucket for reuse outside for my strawberries.
Edit: Here's what it looks like from above
I prefer the metal cans over plastic. I just bought one of these metal safety cans for just a little more than the one you linked.
I have NATO cans on my list but as you say they are expensive and I have several other big ticket items in my to buy queue.
During my research when I thought I was going to adopt some turtles I stumbled across some people using big cattle troughs for them. They’re much cheaper per gallon than an aquarium, and wide rather than tall. Basically a small pond. Just throwing it out there since the size of tank they eventually need can be really expensive.
The one I was eyeing: https://www.amazon.com/Rubbermaid-Commercial-FG424300BLA-Structural-Stock/dp/B07B5Q2THW
Not super cheap but a legit option:
This can works well.
It's also important to understand why rags catch fire. It is a chemical reaction so even if it is cold in your shop they can catch fire.
A clothesline with clothespins is another great budget option.
Once they have cured off/dried hard they can go the regular trash without concern.
If you can't buy what you want, become the one who sells it
I have a Justrite safety can and it doesn’t leak fumes or spray or spill all over when pouring. Don’t even smell gas in the car when transporting back home from the station after filling up.
https://www.amazon.com/dp/B003PGRR48/ref=cm_sw_r_cp_api_i_si1CDbB708QZE
This is what you want
You can buy rags specifically meant to soak up paint at a hardware store, and store them in a metal container once they've been used before disposing of them (or just pin them up outside to air out before reusing them). Old shirts and socks work, too.
I use the 14 gallon version of this for sugar washes. amazon clicky
Maybe this one ?
DRAMA
http://www.amazon.com/dp/B0025QI4XC/
Here ya go
I've got 2 Eagle Cans that I much prefer to any modern plastic can I've used: https://www.amazon.com/Eagle-Safety-Meets-Requirements-Galv/dp/B005ENV6OC/
Think I bought mine a bit cheaper locally than that.
Eagle 1601MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 30 gallon Capacity, 28.5" Height, 21.25" Diameter https://www.amazon.com/dp/B0025QI4XC/ref=cm_sw_r_cp_api_qZW4ybW7FGGMR
Air. You can get a plastic one for $35.
I got sick of those, since all the ones I could find for sale were like that. Ended up getting a proper metal can, and don't have any problems now. Put spout into thing, squeeze handle, get gas into thing.
https://www.amazon.com/gp/product/B000BQO15I
Upgraded my 5 gallon bucket to this 14 Gallon Bucket and it solved all my problems.
Imgur
I was hoping to get away with just a nest box. I will use one of these down the line though if I run into the female having bad egg cycles.
https://www.amazon.com/gp/product/B000NPBLAU/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Ouch! That hurts, my condolences.
I'd recommend a lab pack drum from from Eagle. Comes in a 14 and 28 gallon size.
This drum will solve your problem, in about the same footprint. Holds more debris, and is ROCK-solid sturdy. I got this and love it.
https://www.amazon.com/gp/product/B0026GO5CA/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
First, the dust bible. I know at 4" hose you can only pull 349 CFM. Smaller the hose the less the possible airflow.
Second, Festool makes a great vacuum but IMO it isn't the right choice here. For the money, they don't move a ton of air.
---
Simplest choice - get the Harbor Freight Dust Collector for $170
$170
It pulls about 750 CFM at 5" hose. At a 4" hose you can only get 349 CFM. Go smaller and you drop even more. Won't be super quiet and not HEPA
---
OR
Total = $270
OK, this probably won't be the most well reviewed response, but it worked for me. Just be aware you need a trailer for this.
After a few years of evap ponds, and other things, I got frustrated and just bought 2 of these. I thought would need them both, but in reality, I used maybe 1/2 of one with gray water from showers and cooking. Put some bleach in it from time to time. Dumped it at a gray water approved place after the burn. 7 people will maybe fill 1 if you aren't sloppy.
This is the one i used. I dont think theres any way it will collapse. Very heavy duty
Check craigslist first for carboys. I got 5 6.5 gallon glass carboys for 75 bucks last year. As far as the rest...don't spend a ton.
You want a large primary fermenter, I don't use the buckets because they're too small if you want to use a bunch of fruit for a melomel. You can get a very high quality 14 gallon lab quality HDPE container for 31 dollars drill a hole in it and put in a bung with a 0.25 psi ozone check valve. You never have to worry about your airlocks going dry!!
You want a large stainless steel spoon, no plastic one as they are flimsy and will bend. I think I paid 7 bucks for mine at my local brew place.
You want a carboy brush that you can attach to a drill. I bought mine locally 3 years ago (it's a cheap shitty one like this) and I still use it all the time and it hasn't had any problems.
For sanitization, go Iodophor, it's cheap and it doesn't foam like StarSan, making it easier to rinse out carboys after you buzz them with the brush on your pistol drill. Buy this locally, it's very cheap, and you don't use a lot (like 1 cap full for a carboy) so if you buy the 4 ounce bottle, it will probably last you a year or more. I brew probably 100 gallons a year, and the 16 ounce bottle I bought 3 years ago is still like 1/3 full.
And always go glass, fuck plastic carboys.
For chemicals, go to your local brew place and get some bulk potassium metabisulfite it's the same thing as in campden tablets but it's cheaper in loose form, and a 1/4 teaspoon works just fine in place of a tablet.
I also buy potassium sorbate, it works differently than sulfites to stop fermentation, I use both when I use chemicals at all. You should get this locally, shipping accounts for most of the amazon cost.
You will want an autosiphon, doing it with the racking cane can be kind of a pain in the ass when you're brewing alone. I use a vacuum pump, but don't put up the 200 bucks until you know this is a hobby you really like. Again, get this locally as it's bulky but light so you'll get it cheaper vs buying online.
I don't personally use yeast nutrient except for a very few specific high test (like over 20% ABV) meads. I use raisins, they provide tannins (so you don't have to buy that in loose form) they help to acidify the brew just a bit (so you don't have to buy acid blend) and they provide plenty of nutrient for your yeasties. I add like 1 cup of finely chopped grocery store brand raisins when I brew to each 5 gallons of primary fermentation. Toss these in with your initial water boil to sanitize them and help to break them down a bit for the yeast. You can't taste the raisin after the yeast is done with them, they marginally add some more sugar, but it's so little that I don't even bother to take this into consideration when calculating.
For corking...start with 20 ounce beer bottles and a crown capper. The reason I say this is those lever action corkers fucking blow, none of them are good, and you'll end up with mead all over the place. Until you're ready to invest in a Portuguese floor corker stick with oxygen absorbing crown caps and 20 ounce beer bottles (which you should also buy locally as shipping will kill you on these.) I still bottle all of my no chemical meads in 20 ounce beer bottles to prevent them from launching corks.
Lastly, ditch the hydrometer. Get a Refractometer that has both brix and specific gravity. You will lose less wort and you don't have to worry about accidentally dropping and shattering the thing (which always happens 5 minutes before you need it.) Hydrometers are SUPER fragile.
At work we use a steel safety can, however it's overkill and a bit pricey for a home shop.
You shouldn't throw it in the trash - if you live in a city, there's probably an E-waste/Household hazardous waste program that will take it. You can collect it and dispose of it with your dead batteries, broken electronics, etc.