Reddit mentions: The best industrial hoses
We found 10 Reddit comments discussing the best industrial hoses. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 8 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Unisource TSC PTFE Chemical Hose Assembly, JIC Female Connection
- Flexible pigtail hose assembly for chemical or gas transfer operations
- Nonconductive smooth-bore PTFE tube for resistance to chemicals and high temperatures
- Single-braid 300 series stainless steel reinforcement cover for strength
- Temperature range of -65 to +450 degrees F
- Two factory-installed brass female JIC fittings
Features:
Specs:
Color | Gray |
2. Flex-Tube PV PVC Duct Hose, Clear, For Use With Fume, Dust
- Duct hose for dust control, fume extraction, lawn and leaf collection, and ventilation
- Medium weight PVC is clear for monitoring flow, reinforced with a rigid external black PVC helix, and resistant to external abrasion and crushing
- Very flexible for handheld use and easy installation
- Suitable for applications with temperatures up to 160 degrees F, such as industrial ventilation and woodworking fume extraction
- Smooth interior assures efficient air flow
Features:
Specs:
Color | Clear with Black Helix |
3. Blue 2" x 100' Uncoupled Water PVC Hose - Backwash Filter Discharge Drain Hose - Blue Lay Flat Trash Pump Rubber Hose
Hose Size - 2 inchesHose Length - 100 feetCouplings - NoneHose Type - PVC tube and coverColor - Blue
4. VenTech VT Duct-6 VTD625 Aluminum Duct for Ventilation Ducting, 6''
Applications- Green-House, Room, and TentTemperature - to FStrong AluminumEasy install6 Inch 25 Feet
Specs:
Number of items | 1 |
Weight | 2.8 Pounds |
5. Brewer’s Best 7.9 Gallon Fermenting Bucket
- 7. 9 gallon fermenting bucket
- Gallon markings, child safety warning, conversion charts and dry erase note taking area.
- Printed in English and French.
- Order Item # 5117 if a Grommetted Lid is required and 5117A if a solid lid is required.
Features:
Specs:
Color | White |
Height | 12 Inches |
Length | 17 Inches |
Number of items | 1 |
Size | 7.9 gallon |
Width | 12 Inches |
6. Camco 10ft TastePURE Drinking Water Hose - Lead and BPA Free, Reinforced for Maximum Kink Resistance 1/2"Inner Diameter (22743)
Made with NSF certified hose; drinking water safeReinforced for maximum kink resistance10 feet long x 1/2 inches Inner DiameterHose is made of PVC and is BPA freeCompliant with all federal and state level low lead laws. CSA Low Lead Content Certified to NSF/ANSI 372
Specs:
Color | White |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Release date | October 2005 |
Size | 10' |
Weight | 1.12 Pounds |
Width | 1 Inches |
7. Camco 50ft TastePURE Drinking Water Hose - Lead and BPA Free, Reinforced for Maximum Kink Resistance 1/2"Inner Diameter (22753)
Made with NSF certified hose; drinking water safeReinforced for maximum kink resistance50 feet long x 1/2 inch IDHose is made of PVC and is BPA freeCompliant with all federal and state level low lead laws; CSA Low Lead Content Certified to NSF/ANSI 372
Specs:
Color | White |
Height | 13.13 Inches |
Length | 3.75 Inches |
Number of items | 1 |
Size | 50'1/2'' |
Weight | 0.09 Pounds |
Width | 13.25 Inches |
8. Yellow Jacket 25980 9" FlexFlow and Low Loss Adapter Hoses, Red/Yellow/Blue (Pack of 3)
- Flexible hose between valve and fitting for handling in tight areas
- Operating temperature -20° to 180°F (-28.8° to 82.2°C)
- 800 psi working pressure
- Minimum bend radius: 8" (203 mm)
Features:
Specs:
Color | Red/Yellow/Blue |
Height | 1.3 Inches |
Length | 9.4 Inches |
Number of items | 3 |
Weight | 1.03 Pounds |
Width | 3 Inches |
🎓 Reddit experts on industrial hoses
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where industrial hoses are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Are you using an NPT or triclamp style tube? If you're using NPT (national pipe thread, american pipes in inches basically) you can get a brass NPT ball valve, a reducer to put into the valve for a smaller thread size, and another brass piece, this time a 1/4" flared end for gas. You'll need teflon pipe threading tape to seal everything up and a vice grip or a couple of pipe wrenches to put the thing together. You can get all of this on amazon.
If you have a device like in picture with triclamp ends you'd already know where to get all of this crap but www.glaciertanks.com and www.brewershardware.com sell all the triclamp pieces you will ever need. Glacier Tanks is in oregon and supports the CLS extractor community directly by selling pre-fabbed terpinator style lids and collection pots, Brewers Hardware has a bunch of stuff they don't carry though as well. I've used both and they are awesome. Brewers Hardware also has lower prices on a lot of stuff like the spools you'll be using as extraction tubes, and they sell the national pipe thread to triclamp ends that I'm gonna need to modify my own old open blast tubes (my 1-2 and 3-5oz tubes depending on material and how tight it packs) into CLS parts. I have a calculator setup i've figured out though for how big of a tube can fit how much material for CLS use though. a 3"x18" spool fits about a half pound (bhogart sells a 3"x36" as their 1LB unit and it fits roughly that), so I figured out its volume from there and I can figure out how big of a tube will fit say 1oz, 2 ounces, and so on. you don't need perfectly filled tubes with CLS extractors either, you can fluff the top with coffee filters so the butane disperses evenly on the top, and typically in a shower style unit like the Bhogart, the top few inches don't get properly extracted anyways if you fill it all the way to the brim. I try to leave 2-3 inches at the top of the 36" column bare so it can just shower down and it seems to work really well, but with a narrower tube size you will probably be okay.
IF you got this far, you also are going to want a can cracker. You can use it on the top of the pipe in lieu of the brass hose hookup by screwing it directly to the top, but you need to make sure you get the right fittings for it. It looks like the crackers they sell all have the 1/4" flare end facing the wrong angle, so you'll probably need the hose after all. here's the cracker and a link to the right type of hose, as well as a link to one of the fitting types (though maybe not in the right NPT thread you need).
cracker: http://smile.amazon.com/Robinair-10102-Side-R134A-Respective/dp/B0009XT7NY/ref=sr_1_2?ie=UTF8&qid=1421275663&sr=8-2&keywords=refrigerant+can+
PTFE lined chemical hose buying list. you want 1/4": http://smile.amazon.com/Unisource-Chemical-Assembly-Connection-Pressure/dp/B007USNQNI/ref=sr_1_6?ie=UTF8&qid=1421275772&sr=8-6&keywords=ptfe+lined+hose
the style of brass end you need: http://smile.amazon.com/dp/B000WTXICQ/ref=biss_dp_t_asn
brass coupler to put the end into:
http://smile.amazon.com/dp/B006PKMJCQ/ref=biss_dp_t_asn
something to put the brass coupler into to make it fit your valve: http://smile.amazon.com/dp/B00835RTY4/ref=biss_dp_t_asn
2" brass valve: http://smile.amazon.com/dp/B0081LIGIS/ref=biss_dp_t_asn
ptfe tape: http://smile.amazon.com/Dixon-Valve-Coupling-TTB50-Temperature/dp/B00IIJB7F2/ref=sr_1_3?s=industrial&ie=UTF8&qid=1421277137&sr=1-3&keywords=ptfe+tape
after reading around, you said your pipe was 2" so i modified the list with everything you'd need to modify a 2" pipe.
I would definitely add it if you can. Also, if you want to spend a little more- this hose looks like it will work pretty good: http://www.amazon.com/Flex-Tube-Duct-Clear-0-035-Length/dp/B005QP96I6/ref=sr_1_1?ie=UTF8&qid=1419398642&sr=8-1&keywords=6%22+rigid+tube
It doesn't really matter either way because its wholesome seeing the elephant play. But I'm pretty sure that is a piece of water lay flat hose.
https://www.amazon.com/dp/B01M6W4VH5/ref=cm_sw_r_cp_apa_i_ArUuDb9N1K20E
Fan $74:
http://www.amazon.com/gp/product/B004YXDQZU/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Fan speed controller $21:
http://www.amazon.com/gp/product/B00EVYGPJQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Ducting, $16:
http://www.amazon.com/gp/product/B00DCES1TI/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Bowl that I used for a hood, $24:
http://www.amazon.com/gp/product/B00KYR0ZF4/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
Plus various bits of Home Depot screws, chains, eyelets, hose clamps and a stainless toilet flange to connect the bowl to the duct.
How big are your batches?
6.5 is fine for 5 gallons
2 gallon bucket for 1 gallon batches
7.8 gallon bucket for 6 gallon batches
utility tub | $26
faucet | $20
water filter | $40
GFI w/ housing | $23
drinking water safe hoses 2x | $14
wye valve | $6
expanded metal grate 2x | $40
caster wheels 4x | $23
15' 14 gauge extension cord | $16
various other fittings | $30
total (give or take) | $238
Items from HD and HF don't have tax included, so the total should be a little (~7%?) higher.
This was my wife's idea. I sketched it out and my father-in-law saw the sketch and decided to make it for me. He was a welder/fabricater before he retired. The frame is made from old bed frames.
I need to figure out a way to pay him back for making this. He's not a big beer drinker anymore.
I'm seeing 25' on Amazon for $21 which should be more than enough for my little grow room to reach out the window. Since it's going to be winter soon, do you think it's fine if I vent directly into my grow room instead of keeping my window open all season? I don't know if 2-3 plants will cause mold/mildew with the humidity it emits.
Garden hoses are NOT GOOD for brewing. They usually leave a plastic tastes and aroma in water unless they are specifically made for drinking water like these
This one
I carry these with gauges attached much easier in tight spaces
Yellow Jacket 25980 9" FlexFlow and Low Loss Adapter Hoses, Red/Yellow/Blue (Pack of 3) https://www.amazon.com/dp/B0077FJHWI/ref=cm_sw_r_cp_apa_i_BQ5ZCbPE3M7HH