Reddit mentions: The best industrial process filtration systems
We found 15 Reddit comments discussing the best industrial process filtration systems. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 12 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. 115 Micron Rosin Press Squish Bags • 2" x 4" • 20 Pack • 115u Microns Filter Screen Made from Polyester ft. Proprietary Stitching- Heavy Duty Rosin Tech Bag Highly Rated for Zero Chances of Blowout
- ★ 4X STRONGER THAN OTHER BAGS - While most rosin bags sold today are poorly strung together by a single piece of thread making them prone to ripping under intense pressure, ours come in a reinforced rolled hem stitching that's proven to be 4x stronger than other bags.
- ★ 115 MICRON - Whether you're looking to press trim, shake or flower, the 115 micron variant offers the largest filtration compared to any other variant. However, it's still fine enough to keep any foreign matter away from your oil.
- ★ HATE BLOWOUTS? - Us too! Not only are they frustrating but they're also an unnecessary waste of material. That's why we designed our rosin bags with only premium materials made from 100% polyester monofilament mesh that's able to withstand temperatures of up to 300°F to ensure a smooth extraction process to get you the most yields and reduce any chances of blowouts.
- ★ MORE IN EVERY PACK - We firmly believe in having a presence of both quantity and quality, so each pack comes with 20 of our finest & most premium rosin bags that's 2" x 4" in size, designed to fill 15-20g of material at a time so that you can get more from each press.
- ★ PROUDLY MADE IN THE USA - Locally made and hand sewn in the U.S. of A.—it can't get any better than that. Plus, we offer a way too easy 100% Money Back Guarantee. If you are not happy with our products we will give you a refund. No questions asked!
Features:
Specs:
Color | White |
Weight | 0.0625 Pounds |
Size | 20 pack |
Number of items | 1 |
2. 10 Micron 7"x16" Singed Polyester Felt Filter Bag PESP1S Size 1
Polyester Felt Filter Bag - Multifilament (Nominal Rated Filter)Industry Size#1 - Diameter: 7", Length: 16"Food Grade Material, Maximum Working Fluid Temperature: 275°FStrong Felt, Carbon Steel Support Ring, Hanging Strap, Singed For Added StrengthExcellent For Water, Oil, Biodiesel, Fuels, Weak Ac...
Specs:
Color | 7" x 16" |
Height | 2.2 Inches |
Length | 9.5 Inches |
Width | 11 Inches |
Size | 10 Micron |
Number of items | 1 |
3. 100 Micron NMO Nylon 7" x 16" Size#1 Filter Bag Liquid Filtering
- Nylon NMO Filter Bag - Monofilament (Absolute Rated Filter)
- Industry Size#1 - Diameter: 7", Length: 16"
- Food Grade Material, Maximum Working Fluid Temperature: 325°F
- Strong & Flexible Mesh, Carbon Steel Support Ring, Hanging Strap
- Excellent For Water, Oil, Biodiesel, Fuels, Weak Acids & Alkali, Organic Solvents & Microorganisms
Features:
Specs:
Color | 7" x 16" |
Weight | 0.19375 Pounds |
Size | 100 Micron |
Number of items | 1 |
4. Hydronix HF3-10CLWH34PR, 10" Clear Housing with White Rib Cap For RO & Filtration Systems, 3/4" Ports with Relief Button
- 10" Clear Body, White Rib Cap with Pressure Relief Button
- NSF Standard 42 Certified Material
- 3/4" Ports with Pressure Relief Button
- SAN Material Body
- 75 psi Max. Pressure
Features:
Specs:
Height | 13 Inches |
Length | 5 Inches |
Weight | 2.3 Pounds |
Width | 5 Inches |
Number of items | 1 |
5. Killer Filter Replacement for WIX 46415
- Replaces p/n 46415
- Proudly Made in the USA
- Manufactured with the highest quality materials available on the market, guaranteed!
- Strict Quality Control for a superior product
- product may vary from image
Features:
Specs:
Number of items | 1 |
6. Watts Premier WP531105 RO Pure Annual Filter Kit, 1-Pack
- This Watts Premium water filter replacement kit contains five, 11 inch filters: two 5 Micron sediment Filter (WP105311), two 5 micron carbon pre-filter (WP105351), and one 5 micron carbon post-filter (WP105341)
- It is compatible with the RO Pure (WP531411, WP531407) and Pure Plus (WP531417, WP531517) line of reverse osmosis systems but will NOT fit the Watts 1/4 turn Kwik Change reverse osmosis system
- The sediment pre-filter reduces dirt, silt and rust while the carbon pre-filter and post filter reduce chlorine taste and odors and conditions the water before it is treated by the reverse osmosis membrane
- The major benefits of these filters for your under sink filtration system is to trap and remove sediment as well as eliminate chlorine taste and odor to provide clean drinking water
- To maintain top performance replace sediment and carbon pre-filters every 6 months and post-carbon every 12 months with our easy push button release that doesn't require you to shut off your water source
Features:
Specs:
Color | Multicolor |
Height | 2.5 Inches |
Length | 12 Inches |
Weight | 3.33 Pounds |
Width | 13 Inches |
Size | 5 Count (Pack of 1) |
Number of items | 5 |
7. 2 x 100 Micron NMO Nylon 7" x 16" Size#1 Filter Bag Liquid Filtering
- Nylon NMO Filter Bag - Monofilament (Absolute Rated Filter)
- Industry Size#1 - Diameter: 7", Length: 16"
- Food Grade Material, Maximum Working Fluid Temperature: 325°F
- Strong & Flexible Mesh, Carbon Steel Support Ring, Hanging Strap
- Excellent For Water, Oil, Biodiesel, Fuels, Weak Acids & Alkali, Organic Solvents & Microorganisms
Features:
Specs:
Color | 7" x 16" |
Weight | 0.325 Pounds |
Size | 100 Micron |
Number of items | 2 |
8. Pentek 150296 SW-3 Wrench for #10 Big Blue Housings
- COMPATIBLE WITH PENTAIR PENTEK 10" BIG BLUE HOUSING SUMPS and most other 10" heavy duty housings
- EASILY REMOVES FILTER HOUSINGS for quickly changing water filter cartridges
- HELPS LOOSEN STUCK OR JAMMED FILTER HOUSINGS
- SUITABLE FOR USE in installing or replacing filter cartridges
- CONSTRUCTED OF DURABLE PLASTIC for stability and resistance to corrosion
Features:
Specs:
Height | 0.5 Inches |
Length | 13.13 Inches |
Weight | 0.22 Pounds |
Width | 6.63 Inches |
Size | 10" Big Blue |
Number of items | 1 |
9. Duda Energy PESP1PW-01um 1 Micron Welded Polyester Felt Filter Bag 7" x 16" Industrial Size #1, Polyester
- Country Of Origin: China
- Model Number: PESP1PW-01um
- Item Product Dimension: 16.02" L x 7.02" W x 0.25" H
- Item Package Weight: 0.36 lb
Features:
Specs:
Height | 7 Inches |
Length | 16 Inches |
Weight | 0.34 Pounds |
Width | 7 Inches |
Release date | December 2017 |
Size | 7"x16" 1 Micron |
Number of items | 1 |
10. Rosin Bags (120 Micron, 10)
Perfect Pressure PromiseDye FreeFood Grade NylonDouble StitchedPillow packed
Specs:
Size | 120 Micron |
Number of items | 10 |
11. Nylon Rosin Press Filter Bags 2" x 4.5" (20 pack, 90 micron)
- ✔️+🧵PREMIUM QUALITY ROSIN BAGS WITH DOUBLE STITCH: 100% biodegradable nylon filter bags promising containment free extract during every rosin press. All micron bags use the traditionally strong double stitch sewing method and are also turned inside out so that during the heated rosin press procedure no flower or plant material is allowed to escape and only the purest oil is extracted.
- All IN ONE PACK: Comes with 20 pieces rosin press bags rated at 25-micron, 37-micron, 73-micron, 90-micron, 120-micron, and 160-micron screen and 2" x 4.5" Inch. Pair with your rosin press!
- REUSABLE & PRE-FLIPPED: Our rosin squish bags are turned inside-out to save prep time and can be reused multiple times to maximize yield. Being solvent resistant these nylon press screen bags can also be easily cleaned
- AVOID EXPLOSION- DURABLE & ULTRA-STONG: Able to withstand a pure pressure rosin press of 20 tons and is heat resistant up to 350 ° F. However, to reduce blowouts, breakage, and for better yield we recommend keeping the press below 2000 PSI and around 50-275 ° F.
- WE ARE WITH YOU- # 1 in customer service | Protection for life, RETURNS GUARANTEED, don't worry if the micron size is not correct or if you decide that these rosin bags are not suitable for you, get a full refund within 90 days for quickly and smoothly.
Features:
Specs:
Color | White |
Height | 1.89 Inches |
Length | 7.09 Inches |
Weight | 0.04 Pounds |
Width | 4.69 Inches |
Size | 90 micron |
Number of items | 20 |
12. FSI (BPONG5X01) Filter Bag, X100, 5 Micron, Polypropylene Felt
Specs:
Weight | 0.3 Pounds |
🎓 Reddit experts on industrial process filtration systems
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where industrial process filtration systems are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I had to break this into another comment due to per comment character limits.
The following previously belonged to the above comment, but was moved here due to the above mentioned limts.
> Something you can do now: Build a filament drybox. Seriously, some filaments such as certain Nylons can go bad in just a few hours, depending on ambient humidity levels. All filaments are susceptible to moisture absorption, and ideally should be kept in something like a Spannerhands holder, even while printing, but at worst you should store them in a big plastic tub with silica gel beads to keep them dry.
> If I had to give one last tip, don't stock up on too much filament yet! Seriously! I thought I would be printing mostly in PLA but now that I've had a few weeks to work with it, I've learned I prefer PETG more, and now I have so much extra PLA! I'm sure I'll find something to do with it, but for my final tip I would add "And get a good variety!". Services like MakerBox (referral) let you try a bunch of different filaments on the cheap. It's not a ton of each filament (about 50g), but I love the variety of materials and colors.
Original second level comment begins:
Final Tips: Bonus Round!
There are tons of other accessories you can get ahead of time. None of these are necessary, but are small things you might end up using (or wanting to try :P), and should help get you started getting a wishlist together. Besides the ones mentioned in this comment (and the one that precedes it) already:
Edit: Upon rereading my comment I realized I have a problem.. I own every product I just listed..
^^Except ^^for ^^the ^^nozzles ^^kit ^^so ^^it's ^^not ^^that ^^big ^^of ^^a ^^problem, ^^right?... ^^Right?!
personally i would go with something like this with one of these I believe that still also comes with tubing, clamps and a hookup to your faucet but i may be wrong. In which case those are easily ordered from amazon or ebay. This setup would be pretty close to the ease of the t500 due to the electric element, its also safe to run indoors (provided you leave a window open for ventilation) and the 2" triclamp leaves your options open for upgrades like a reflux column should you wish to produce neutral or vodka. I also want to add, a nice hdpe bucket like this and a airlock such as this are great to have. A filter like this comes in handy for filtering yeast and sediment out of mash. As far as extras you dont need much other than a mash bucket, airlock, and way to cool your still head. I personally run a 32gal trash can filled with water and a pond pump to to recirculate my water without any wasting any, but for a small apt i would just use the kitchen faucet and screw on a adaptor
GIT GUD SON!
Seriously, attention to detail will drive your beer from ok to good.
Control will take it to great.
Water: This is most of your beer, if your water sucks your beer will suck. At the least use a carbon filter or campden tabs to kill the chlorine/chloramines coming through from the tap. Below are links to a filter setup. Plumb the outlet to 1/4" OD tubing. This will slow down the flow a lot. Slower flow = better contact time = better water. Get this much done on the cheap, if you want to play with RO and pH do it later. Get this level of consistency down first.
Filter body: https://www.amazon.com/Hydronix-HF3-10CLWH34PR-Housing-Pressure-Relief/dp/B01CFOGH32/ref=sr_1_4?ie=UTF8&qid=1494856726&sr=8-4&keywords=10%22+filter+body
Filter:https://www.amazon.com/DuPont-WFPFC8002-Universal-2-Phase-Cartridge/dp/B007JRDT96/ref=sr_1_2?ie=UTF8&qid=1494856764&sr=8-2&keywords=dupont+carbon+filter
Make sure you are getting a good boil. Target 1gal/hour of boiloff. This will help your drive off undesirable compounds in the wort and up your hop utilization.
Hops: Make sure they are fresh, frozen, and under vacuum (if you can't manage vacuum double ziplock making sure to push out as much air as possible)
Yeast: Manage your pitch rates, use the calculator over at brewunited. If you don't have the resources to manage yeast starters stick to dry yeast and learn how to rehydrate them. More and more strains are emerging on the dry market and the dry yeast offers a great deal of consistency.
Ferm Temp: This one will make you a hero. This one is not as expensive as it seems. It is May, dorm fridges should be flooding CL, snatch one up for cheap, pick up an ITC-308 from amazon for a temp controller, and also pick up a 17W seedling heat mat. If you are careful all this could be had for less than $100.
Post Ferm: Once the beer is done fermenting minimize contact with oxygen. Since you are focusing on pale ales reducing the oxygen contact with the wort will easily improve your quality. Check out the sterile siphon starter over at brulosophy and note how they have it directly hooked up to the keg post instead of dropping the tube through the open top.
Feel free to PM me if you have further questions.
That's another good thing about these, they've been used by quite a few countries around the world, so there is quite a bit of information as well as manuals in English.
You can get them directly from Puch, as well as most of the importers offer them, like Pinzgauer.com and/or Expedition Imports. That said, you may want to check the forums to see if they have some free versions somewhere, since the importers tend to charge quite a bit for them.
Pinzgauers won't show up in most automotive search engines. The basic items aren't too exotic, with Sparkplugs, Fuel Filter, Oil Filter and Air Filter readily available.
Here is a link to a pretty nice parts-interchangeability list.
Overall, parts are not too bad, with some being rather expensive. That said, this has been the case with most of the older cars i've owned, with some parts being 5-10 bucks and others simply costing hundreds of dollars for no apparent reason. Old vehicles tend to do that to ya :P.
I was in a pretty similar situation. Our water is really hard and after running through the water softener it doesn't taste that great. I picked up this guy to improve the taste of our drinking water. I've only had it for about 6 months so I haven't replaced any of the filters yet. It looks like amazon also has an annual filler pack for a little over $60.
We didn't have any problems with installation. All the connections were simple 'push together' type connections. If I remember correctly it even comes with a splitter to fork the filtered water out to the fridge.
The cons:
I'm glad we did it just because the water tastes so much better than our regular tap water, but YMMV.
Hello! This looks incredible! I'm just now a high school senior and have been looking into aeroponics after having done hydroponics for at the past three years. I was apprehensive to spend my petty fast food job money on one of those $80 8800 pumps that aeroponic supply companies sell, and those outrageously priced $5 a piece 50 micron plastic nozzles. I'm glad I finally found a source of information that doesn't try to up the price a ridiculous amount. Also great work on using the Arduino as a timer as that was my plan too! I just never got around to it and decided to learn Python instead of C++ :P You're quite right that finding a timer for this kind of application is both a pain and expensive otherwise.
I have a few questions about your build.
How many nozzles/sprayers can this system support?
Is the above question dependent on the size of the accumulators?
Are those brass nozzles able to produce 5-50 micron droplets?
Are there any problems you have run into using this system?
Final note: check these filter bags out, as they might be a little easier to use straight away than a sponge and could fit into a larger water reservoir.
Its a shame the previous owner didnt leave the wrench (its a plastic hoop with 6 notches and a handle) but if you need a replacement they are pretty cheap on amazon :http://www.amazon.com/Pentek-150296-SW-3-Wrench-Housings/dp/B004VNCEA6/ref=sr_1_3?ie=UTF8&qid=1462984940&sr=8-3&keywords=water+filter+wrench
obviously check your filter against the description before ordering, they sell them in all kinds of sizes.
It's entirely possible to use a hair straightener if you're careful.
Hash doesn't need a whole lot of pressure. But the temperature you have to watch. It should only have the slightest sizzle when you touch it with your wet finger. When I used one of those back in the day, I would toggle the power until I found the sweet spot.
And you definitely have to use some kind of bag to hold back the plant matter. You can grab them on the cheap from Amazon.
A few recommendations:
Something like this filter will take it to the next level, until you get a plate filter...
https://www.amazon.com/Duda-Energy-PESP1PW-01um-Polyester-Industrial/dp/B00KE83O7Y/ref=sr_1_6?keywords=1+micron+filter+sock&qid=1568692488&s=gateway&sr=8-6
>rozninc bags
>
> https://www.amazon.com/ROZN-inc-Rosin-Bags/dp/B07RHHVV4B?th=1
>
>These?
Yeah for Kief or real smushy material you need to order some of these bad boys https://www.amazon.com/Nylon-Rosin-Press-Filter-micron/dp/B06X6KG5T9/ref=sr_1_1?s=home-garden&ie=UTF8&qid=1527560275&sr=1-1&keywords=Squish+Strong
But me personally i go for much smaller presses so i think the bags i use are from that same company but they are 1.5inch x 4inc a smaller bag. edit just for reference, i only press buds and rarely have to use the bags. Sometimes ill get some fresher material than i expected and ill have to use the bag before if not the shit will just keep pancaking out too far
I’m not going to lie, this post may scare some people off... it’s really simple I just explain in specific details... here look at My Tula results I have replicated multiple times with this process...
Buy this too:
———————
5 Micron Polypropylene Filter Bag - overkill/makes paint slick
Read all this if you want good results, I go into detail, maybe too much but it is what it is.
Buy filter too, cut out circle from filter large enough to fold into a cone that you stick in your small funnel you use when pouring paint into your gun. If it won’t stay folded, paperclip/staple, the folded piece.
Make sure you have clean gloves on, and good ones... when the paint is almost done straining, squeeze the filter pushing the last bit through. To reuse filter run cheap lac thinner through filter media.
Prep Notes:
——————
If you are this far, I am assuming you followed my recommendations for 120-180 alum ox to prep with, you just sprayed the gun down with lac thinner or acetone and it’s hanging...
Mixing:
————
This whole process will make the paint a little runny, but silky smooth - mix it at 2 parts paint, 1 part thinner, basically 70% paint, 30% thinner.
***If you get cob webs which look like spider man spraying webs from your clean gun put a little more ethanol in until it sprays smooth. Think “50:50 is max dilution, I’m at 70:30” and eyeball a 60:40 mix.
Spraying:
—————
Turn the pressure down on your gun to 25psi, that is set when you depress the trigger half way.
You want it to go on glossy/shiny/wet looking and even. Let first coat dry by air, don’t use a heat gun. Put subsequent coats on nice and wet enough to shine but not enough to run and you will have dead nuts the Tula look, take your time.
IF you get a run with this paint it is OK, let it dry... it will take a bit to dry dry, Go right back over run area next few passes. With a little bit of glossy misting, then a wet coat.
Do not over do the first coat, make sure your 10 inches back... the ethanol will retard dry time a lot. Be patient.
Do NOT put this project in the over, near heat, near a fast blowing fan once it’s wet. It is going to dry slow slow and that helps process smooth out the paint. If you do get it near heat, fans, whatever just repeat until it is black and shiny.
Once dry over night you can bake it/heat with heat gun.