Reddit mentions: The best lab furniture
We found 129 Reddit comments discussing the best lab furniture. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 43 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Karter Scientific 208U2 Plastic Test Tube Rack for 15/18 mm Tubes, Holds 50, Detachable (Single)
- For tubes with an OD ranging from 15mm to 18mm
- Hole Diameter: 18mm
- Color: Clear
Features:
Specs:
Color | Clear |
Size | 15/18mm |
Number of items | 1 |
2. Eisco Labs Premium Wooden Test Tube Rack, (6) 22mm Holes, 9.5" Long
6 holes each 22mm in diameterMinimum test tube or other object height is 3.25Use to hold tooth brushes, razors, or even pens
Specs:
Height | 5 Inches |
Length | 10 Inches |
Weight | 0.75 Pounds |
Width | 3 Inches |
Number of items | 1 |
3. Parafilm M Roll, 250' Length x 2" Width
- Parafilm M roll
- Small piece of this film will seal test tubes, beakers, flasks, culture tubes, etc
- Made of a semi-transparent, flexible and waterproof material
- Resistant to most acids and alcohols yet is gas permeable
- Measures 250-feet length by 2-inches width
Features:
Specs:
Color | Original Version |
Weight | 0.220462262 Pounds |
Release date | June 2020 |
Number of items | 1 |
4. Hydrion S/r Dispenser 0.0-6.0 Ph Range 96 - 15 Ft Roll w/ Color Chart/ Dispenser
- These papers will enable you to detect 0.5 pH unit differences with unprecedented sharpness from a pH of 0.0 to 6.0 clearly, quickly and easily.
- Hydrion Brilliant pH Paper is a general use pH paper.
- Distinct and easily read color seperations
- Accurate, reproducible readings with an immediate response
- Standard 7/32" x 15' roll and color chart
Features:
Specs:
Color | Original Version |
Height | 2 Inches |
Length | 2 Inches |
Width | 0.5 Inches |
Number of items | 1 |
5. Eisco Labs Premium Wooden Test Tube Rack, (12) 22mm Holes, 16.75" Long
- 12 holes each 22mm in diameter
- Minimum test tube or other object height is 3.25
- Use to hold tooth brushes, razors, or even pens
- Wooden test tube stand - 12 holes of 22 millimetre. Test stand measures 16.75 inch long 2.5 inch wide base and 4.5 inch tall
Features:
Specs:
Height | 3 Inches |
Length | 18 Inches |
Weight | 1.2 Pounds |
Width | 5.5 Inches |
Number of items | 1 |
6. Karter Scientific 208V2 Plastic Test Tube Rack for 12/13mm Tubes, Holds 50, Detachable (Single)
- For tubes with an OD ranging from 12mm to 13mm
- Hole Diameter: 13mm
- Color: Clear
Features:
Specs:
Color | Clear |
Weight | 0.2 Pounds |
Size | 12/13mm |
Number of items | 1 |
7. Eisco Labs Wood Test Tube Rack, 12 Tube Capacity, 7/8" (22mm) Holes
- HOLDS 12 TUBES || Wooden test tube rack to fit twelve test tubes (test tubes not included)
- BEECHWOOD || Made of strong and durable polished beechwood - Easy to clean - Built to last - Coloring of wood may vary slightly from images shown
- SIZE || Measures approximately 6" x 9" x 3" - Each hole fits 3/4" (20mm) test tubes
- MULTI USE || Designed for use in a science laboratory or classroom, but perfect for use in storing test tube shot glasses, ground spices, or toothbrushes
Features:
Specs:
Height | 3.15 Inches |
Length | 8.66 Inches |
Weight | 0.75 Pounds |
Width | 6.69 Inches |
Number of items | 1 |
8. 50 Piece Assorted Color Plastic Test Tube Set with Caps and Cardboard Rack
Unbreakable dishwasher safe polypropylene plastic5 fun assorted colorsCardboard rack16x125mm Test Tubes, 5 inch in length
Specs:
Color | Assorted |
Height | 4.5 Inches |
Length | 10.75 Inches |
Width | 2.5 Inches |
Size | 16X125MM |
Number of items | 50 |
9. American Educational 7-1409 Wooden 2 Rows Test Tube Rack, 12 Tube
Two-row wooden test tube rack holds up to 12 test tubes for use in classrooms and laboratoriesEach row holds up to six test tubesWooden construction is durable and wipes clean
Specs:
Height | 2.3 Inches |
Length | 8.3 Inches |
Weight | 0.3086471668 Pounds |
Width | 5.5 Inches |
Number of items | 1 |
10. Stainless Steel Test Tube Rack, 18 mm, 40 Tubes
- Stainless steel test tube rack
- Size: 9"x5"x2"
- Holds 40 tubes in 4 rows
- Hole diameter: 18 mm (0.75"), fit test tubes with diameter of 18 mm or less
Features:
11. Bel-Art F18788-2003 Poxygrid “Half-Size” Test Tube Rack; 18-20mm, 20 Places, 4¹⁵/₁₆ x 4¹/₄ x 2¹/₂ in., Orange
- Durable and smooth coating is impervious to organic solvents, salts, weak acids and weak alkalis
- Poxygrid "half-size" is an ideal space saver, perfect for use in water baths, under fume hoods, and other limited space locations
- Holds 16-20mm tubes in a 5 x 4 configuration
- Epoxy coated steel wire racks are chemical and corrosion resistant
- Withstands temperatures ranging from -223C (-369F) to autoclaving at 121C (250F) and can be autoclaved
Features:
Specs:
Color | Orange |
Size | 18-20mm Tubes |
Number of items | 1 |
12. Cole-Parmer Wooden Test Tube Holder, 1/ea
- Product Type: test tube racks/stands
- Tube Size: up to 25 mm
- Tubes held: 6
- Material: wood
- Length (in.): 10.5
Features:
Specs:
Weight | 0.5 Pounds |
Number of items | 1 |
13. Heathrow Scientific HS29022G 4 Way Tube Rack, Polypropylene, Assorted Colors, Blue, Green, Pink, Yellow, Orange (Pack of 5)
Create as large a rack as you need by linking together multiple racksHeavy-duty polypropylene racks feature a unique system of tabs and slots, which facilitate easy connection and sturdy fitAutoclavableConveniently connect end to end or side to sideEach rack can hold different sized tubes on each si...
Specs:
Color | Assorted |
Height | 1 Inches |
Length | 8.9 Inches |
Weight | 0.33 Pounds |
Width | 1 Inches |
Size | Pack of 5 |
Number of items | 5 |
14. Heathrow Scientific HS120033 50 Well Microtube Storage Box, Cryogenic Box, Tube Storage, 1.5mL/2.0mL Tubes,Polypropylene, 5 Assorted Colors, (5/pk)
- Easy-open hinged lid with snap clasp
- For smaller storage requirements of 1.5/2.0 mL microtubes or cryogenic vials
- Ideal for sample or case study storage
- Designed for quick visual identification
- Uniform wells with location identification
Features:
Specs:
Height | 1 Inches |
Length | 8.9 Inches |
Weight | 0.33 Pounds |
Width | 1 Inches |
Number of items | 5 |
15. Durham 307-95 Gray Cold Rolled Steel Easy Glide Slide Rack for 4 Small Metal Compartment Boxes, 15-1/4" Width x 11-1/4" Height x 11-3/4" Depth
- Sturdy construction using prime cold-rolled steel
- Accommodates 4 small compartment boxes
- Easy glide slides allow boxes to move in and out smoothly
- Center braces on cradles provide extra rigidity
- Measures 15-1/4" width by 11-1/4" height by 11-3/4" depth
Features:
Specs:
Color | Grey |
Height | 11.25 Inches |
Length | 15.25 Inches |
Weight | 19.7 Pounds |
Width | 11.75 Inches |
Size | 1 |
Number of items | 1 |
16. Small Clear Plastic Mini Funnels for Bottle Filling, Perfumes, Essential Oils, Science Laboratory Chemicals, Arts & Crafts Supplies by (12 Pack)
- They are fit for essential oils, ice balls, small samples of perfume liquid emulsion and sand art. Use them for art projects like filling hour glass bottles with fine colored sand with sea shells for a nautical theme centerpieces for a beach party or wedding theme. Tiny separatory funnel work wonders in science classrooms where daily activities will use them in bulk. They will insure precise pouring in jars, laboratory beakers, graduated cylinders, and lab experiment test tubes.
- Use for fast and clean transferring fluid, liquids, dry goods, spices, powders, small-grained ingredients, or seeds for spice racks or pantry. Fill roll-on bottles, spray bottles, containers, cruets, jars, narrow-necked flasks, tubes, or vials. Ends waste and eliminates everyday messes. Made for residential and commercial use. Easy to store, they can be nested or hanged.
- Put some craft supplies through these funnels to spray and sprinkle some fun decorations onto any craft project. Works well with sand, glitter, and other small accessories.
- Fill up a small bottle with new perfume or some essential oils with no hassle, thanks to these durable mini plastic funnels. Comes in a pack of 12 clear mini plastic funnels.
- Clear plastic funnels measure 2" inches tall, 1/4" inch wide opening at the top, and 1 3/4" inches wide at the bottom opening.
Features:
Specs:
Height | 4.5 Inches |
Length | 4.5 Inches |
Weight | 245 Grams |
Width | 4.5 Inches |
17. 6 Slots Acrylic Strong Test Tube Cups Holder Organizer Rack for Laboratory Exhibition Bar KTV
Can contain 6 test tubes or cocktail cups whose diameter is less than 2.1 cm/0.83 inchSuitable for laboratory, bar, exhibition, family party and other special festivalMade of acrylic, clear, glossy, no miscellaneous points, quite elegantEvery slot is designed regularly without much burr, can hold th...
18. Ajax Scientific Kiln Dried Wood Test Tube Rack with 6 Drying Pins, 6 Tube Capacity, 240mm Length x 70mm Width x 90mm Height
- Ajax Scientific test tube rack
- Made of kiln dried wood
- It has 6 openings of 24-millimeters diameter and 6 drying pins
- Measures 240-millimeters length by 70-millimeters width by 90-millimeters height
Features:
Specs:
Number of items | 1 |
19. Bel-Art F18746-0001 No-Wire Test Tube Rack; 13-16mm, 60 Places, 9.7 x 4.1 x 2.5 in., Polypropylene, Red
For 16mm Tubes; 60 places - 5 x 12 rowsRack dimensions: 9.7 x 4.1 x 2.5" (24.6 x 10.4 x 6.4cmH)Features end plates for easy labeling and lettered and numbered rows for tube identificationDurable, red polypropylene rack is submersible in a water bath and stable in agitated waterAssembles in seconds, ...
Specs:
Color | Red |
Weight | 0.3527396192 Pounds |
Size | 13-16mm Tubes |
Number of items | 1 |
20. BCP 50pcs Plastic Clear Color Graduated Vial Tube with Screw Orange Caps
Package included: 50pcsMaterial: plasticCapacity: 5ml; Over size (L x Dia.):2-5/16 x 5/8inchesColor: clear tube + orange capIdeal for storing samples, beads, essential oils, etc. can be stored at low temperature.
Specs:
Weight | 0.37 Pounds |
Number of items | 50 |
🎓 Reddit experts on lab furniture
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where lab furniture are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
You can set out the drinks in these beakers!
You can put pixie stick sugar (or soda?) in these test tubes!
They can all wear these safety goggles that come in a 12 pack!
They can all play Mouse Trap!
You can get this 24-pack of magnifying glasses and set up a scavenger hunt around the house, leading them all to a room where they work together to make an exploding volcano!
You can use these syringe pens as party favors.
These alien test tubes would make great centerpieces/party favors as well! This would probably be the coolest thing at the party. :D
And here are some more party favors - test tube bubbles!
Hope that helps! She sounds like an awesome kid. My daughter just turned 8 and she would have loved a party like this too! :)
I recommend this and these
It’s a set of vials and syringes. I would recommend getting a vial holder as well. That way, you have all the vials in one places and are not as likely to spill. The vials are nice because you can test small batch mixtures. Label the tops of the vials and keep a notebook. Rhodia is good or something else that can show off sheen. This way, you can more down the vial designation, the proportions, the inks used and what the resulting color looks like.
Another thing you would want to learn about is color therapy because a cool yellow mixed with a warm blue will give you a different green than a warm yellow mixed with a cool blue. Rot dye has a great mixing chart that is a wonderful resource for color mixing.
Beyond that, different inks interact and react in sometimes unexpected ways when mixed, which is another reason to have small vials to see what the reactions are and if the ink start to separate or do something else unusual.
You can get lots of cute ideas from The Container Store, if you're also in the need for storage on top of the vanity.
One of my favorite options is a magnetic board also. You can either get them like this off Etsy, or you can buy a magnetic board at Michaels/Home Depot with some small magnets and DIY. I'm fond of just a plain magnetic board with no covering, too. Looks kind of ... I don't know, rustic? Is that the word? It's really easy to do and ends up saving you counter space.
There's also Fold-out type desks that will save you space. I know you said you now have the room for a full vanity, but space savers give your floor space a clean, modern feel that I personally like. You could even stick a cute lounge chair under it to be used as your makeup chair and reading chair depending on the time of day. :)
If you won't find yourself refinishing an older product, my only concerns would be squeaky drawers (I get goosebumps just thinking about that noise, ew, ew, ew) and paint flaking off if it's previously been painted. Neither of those might bother you. If you can find something kickass at a garage sale or antique shop, that's awesome.
Edit: Don't forget about cake stands for perfumes or other jarred liquids as well. This one is a little gaudy, but you get the idea.
Spice racks for nail polish storage.
Test tube racks for brush storage.
Did I go way off topic? You asked about vanities, and I went mostly with accesorries. Oop.
I get mine from Amazon, but I also use a lot of tubes. Instead of inking up my pens from bottles, I only use sample vials (or something like a TWSBi inkwell for my larger pens). It's a great way to avoid contamination of your ink. We live in a pretty moldy area, so I"m always concerned about fuzz on the pens syndrome.
Note: there are other types of tubes that are on eBay, but these cryotubes are by far the best. The other clear ones can't have 5ml unless you fill it to the brim, making a mess of things. These tubes are exactly like the ones sold on Goulet pens, only it has blue lids instead of clear.
https://www.amazon.com/gp/product/B074QKMF2G/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
If you'd like a rack for your sample vials, here's a link to the one that I purchased. It is identical to hte ones sold on Goulet.
https://www.amazon.com/gp/product/B005Z4QWIK/ref=oh_aui_detailpage_o07_s02?ie=UTF8&psc=1
I'm ready for this question! I have a whole bookmark tab because I'm planning on building a vanity and redoing all of my storage. I'll give you a sneak peak into it (; Let me know if you want more! I have a bit more than a dozen of these things saved.
First up, acrylic drawer organizers!. Much cheaper than most other competition I've seen. I use these to house blush and bronzer and whatnot. If you guys can find a flaw in the first one I linked please let me know since that is what I'm planning on buying!
For samples, lots of people go for ammo boxes but I'm thinking of buying test tube racks/cases such as this or this. There's also a stainless steel options of the later version that look really pretty but are much more expensive and since these will be in drawers...I don't care quite that much.
If you do go for ammo boxes, however, this particular box has been mentioned several times in the past. It won't fit the longer or short and fat samples, but it'll do fine for most others. I don't care for it because of the color options, to be quite honest about it. It's a superficial thing and if you don't care I've seen many great reviews of this box.
For full-sized bottles, I've seen people use cake stands and pretty trays but since perfumes are light sensitive I plan on hanging a spice rack like this one inside a cabinet. Really you can hang it anywhere as long as it's out of light and humidity (so not in your bathroom!).
nah that's not at all what you want, it's not measuring pH but concentration of sanitizer in solution. pH strips like this or something with a more specific 1.5-4 range would be ideal.
That said, pretty much any level of acidity is ok, 2.4-6 is rather ideal and I would consider 2.2 or lower necessary for pickling: however, I do not recommend pickling with homemade vinegar. In order to pickle safely you need to know not only the pH but the concentration of the vinegar and for that you need to test the presence of acetic acid in your vinegar, those tests are a lot more expensive ($50/$80) than a couple hundred pH strips.
Grab some clean ones from the lab... ha, just kidding. I do science too, and considered that aesthetic for centerpieces as well (we decided to go with a travel theme instead). Amazon actually has a TON of test tubes, erlenmeyer flasks, graduated cylinders, and other glassware for pretty good prices. Here's a wooden test tube rack that looks pretty cool, and there are loads of others as well. Looking forward to seeing what you come up with!
http://m.ebay.com/itm/281880651830?_mwBanner=1
100 for $9 vs 10 for $3 (+ $4 shipping) at Goulet. Comes out to 9 cents a piece vs 71 cents (with shipping) at Goulet. But remember they are literally on the slow boat from China from eBay!
You may also like this holder: https://smile.amazon.com/gp/aw/d/B005Z4QWIK/ref=mp_s_a_1_1?ie=UTF8&qid=1496098817&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=sample+vial+holder&dpPl=1&dpID=41dcT%2B82SsL&ref=plSrch
It is less than half the cost on Amazon
Both of these products are identical to what Goulet sells.
BTW I LOVE GOULET and do most of my purchasing from them! Always like to support the local community :)
I use the aforementioned 50-tube holder from Amazon as it's cheaper and larger than the Goulet's. They stack on top of each other in a drawer, which is a good thing, as I'm on my third rack.
And I used to try to cut up little bits of avery labels to put swabs on the top, but then I discovered paper hole reinforcers, and they fit on top of the vials perfectly. Here's what two of my racks look like next to my sample journal: http://i.imgur.com/K39IM2Y.jpg
I bought a test tube rack like this one for my DE razors.
Actually mine is the same model, but with only 6 holes... wish I bought the one with 12 (or even two of them). :D
I only own 2 Soaps (Arko and Cella).
My aftershaves are stored in one (of three) bathroom cabinets - the one without doors so I can reach them easily.
In the second cabinet (which has a lock) I glued some tiny magnets like this on the inside of the door, so I can hang my blades I currently use.
I like some items from frugalshave on etsy, like the blade dispenser - have a lot of loose blades floating around.
Thanks! Wish I would’ve straightened the labels out more for optimal satisfaction! Lol.
Karter Scientific 208U2 Plastic... https://www.amazon.com/dp/B005Z4QWIK?ref=ppx_pop_mob_ap_share
Look on amazon if it's available to you - not super expensive
Also, just saw amazon has tube racks as well which would be AWESOME for short term product storage in a hotel/gues bathroom throws money at screen
I don't pH my skincare products, but I do work in the lab and pH solutions on a regular basis.
If you want to get pH strips, it's important to get the ones with multiple color indicators. I'd suggest getting one from a reputable science supplier, like machery-nagel or milipore/emd. Don't get the cheapo single-color yellow test strips - those aren't very accurate or precise.
If you really care about accuracy / precision / reproducibility, just get a digital pH meter. You can calibrate them to pH standards (pH = 4, 7, 10, etc.).
Edited for typos
awesome!
figured i'd check for similar stuff on amazon and found this: [Karter Scientific 208U2 Plastic Test Tube Rack for 15/17mm Tubes, Holds 50, Detachable] (http://www.amazon.com/Karter-Scientific-208U2-Plastic-Detachable/dp/B005Z4QWIK/)
from my measurements the WL vials are 17mm so should work great
I use the Eisco Labs Wood Test Tube Rack, 12 Tube Capacity. It's pretty cheap, holds lots of pens, and looks pretty good.
See if you can find something like these and this. The test tube rack fits on my scale just fine. I use the 8 ml tubes but they go much higher. Be sure to match up the diameter of the rack holes and tubes. Inexpensive, reusable , quick and efficient.
These are the ones I use Boston Round Bottles and I seal the tops with parafilm though if you can find 1" wide tape instead of 2 that would be better. I normally have to cut the 2" tape in half to wrap the bottles. I've used both kinds of tops and haven't had any leak yet.
edit: format correction
I use a couple of these wood test tube racks.
They're capable of holding every type of razor I've owned. Plus they fit in my medicine cabinet nicely, and they don't look half bad IMO.
If you're looking to store lots of small sample bottles or vials, cryoboxes may be your best friend! https://www.amazon.com/Heathrow-Scientific-Microtube-Cryogenic-Polypropylene/dp/B006BDDDEA/ref=pd_day0_328_5?_encoding=UTF8&pd_rd_i=B006BDDDEA&pd_rd_r=AZSXHA6SR0KJ9KQ0G9ZH&pd_rd_w=ypH9w&pd_rd_wg=uEcC1&psc=1&refRID=AZSXHA6SR0KJ9KQ0G9ZH
Just an fyi. The third option already exists by many different options. One popular option is sortimo. Another one would be these boxes which have a compatible drawer type rack like this one. The stool one though I like. I have a stool I use all the time at work that has a platform under it where I will lay the stuff I need. So just having it on board in a drawer might work well.
I use a soft wooden test tube stand for inked pens and keep them nib up. Sometimes I have flow issues, but like having them visible and protected. Uninked pens I keep in lined drawers in one of these or a pen case.
Yeah test tube racks are great for storing. This one works well:
http://www.amazon.com/gp/product/B00I13ZNIC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Here you go
https://www.amazon.com/dp/B01COLW9IS/ref=cm_sw_r_cp_api_i_cx4RDbB44VE31
https://www.amazon.com/dp/B01B573D4Q/ref=cm_sw_r_cp_api_i_My4RDbRV8BJ5Z
For less than the price of two shade bottles you can ensure you’ll never lose another drop. 2 because you purchased the one that spilled and the one that you’ll replace.
Happy painting.
I bought this one for my API test kit and its the best purchase ive ever made on amazon. Is on Prime as well for $6.09.
You can buy them from Goulet pens, they have a 40 vials one.
I found this 50 vial holder, which is the same thing but bigger capacity. It works perfectly. (mine is almost full... I think I went overboard with it).
You might be able to find a stand like made for regular pens, vape pens or crafting supplies. I've seen wood ones on Amazon and clear plastic ones at Dollarama.
Maybe this will do the job, might be too tall though. https://www.amazon.ca/Ajax-Scientific-Drying-Capacity-Length/dp/B00EPQ4SL2/ref=sr_1_10?
or this
https://www.amazon.ca/Acrylic-Strong-Organizer-Laboratory-Exhibition/dp/B0721MCRRZ/ref=sr_1_9?keywords=test+tube+holder&qid=1555072355&s=gateway&sr=8-9keywords=test+tube+holder&qid=1555072251&s=gateway&sr=8-10
This single pen stand might be what you want too.
https://www.amazon.ca/Coideal-Container-Toothbrush-cigarette-Organizer/dp/B01KM540R6/ref=sr_1_5?keywords=pen+stand&qid=1555072442&s=gateway&sr=8-5
For anyone who wants one, I have this one and it's great. I like it as opposed to the one pictured because it doesn't have the drying pegs, just two rows.
Not to take biz away from a cool fountain pen company but this looks an awfully lot like a Karter Scientific 15/17mm tes tube rack. You can grab one for $6 from Amazon if cash is tight.
This is the one that I got from Amazon: http://www.amazon.com/gp/product/B00I13ZNIC/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
It is pretty nice. Seems sturdy. Might look at getting little rubber feet for the bottom to stop any accidental sliding. The only thing to know would be any TTO razors will be less steady than a two/three piece just because of the lowered bar in the middle being the part in contact with the wood instead of the whole (or at least both sides) head like a three piece.
Here is a couple pictures I took of mine. http://imgur.com/a/w93ge
(Dovo 5/8 straight, slim, 34c, red flare tip, black handle flare tip, wilkinson sword). There is a little less than 1mm difference between the diameter of the hole and the width of of the straight where it meets. Not snug, but not enough room to rattle.
Edit: Straight razor size
If you haven't already ordered one you can get it cheaper on Amazon, plus it has Prime shipping.
http://www.amazon.com/Eisco-Premium-Wooden-Holes-16-75/dp/B00I13ZOUO?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_search_detailpage
Pretty sure it's the exact same thing, the stock photos are identical.
Parafilm. u/euthanized recommended it to me and I works like a charm.
https://www.amazon.com/gp/aw/d/B005KDF3X6/ref=sxts1?ie=UTF8&qid=1485350007&sr=1&pi=AC_SX236_SY340_QL65
I just have them floating in a drawer right now also, but a guy I work with uses this test tube rack and it works exceedingly well. I'll be picking one up soon, or one like it.
I use a vial rack from amazon it was around 5.99 and holds 50 vials.
ETA link and state price is now $6.09
I also bought some tiny round stickers. I put one on top of each sample vial and put a little ink on the sticker. Makes it easier to find a certain color.
get a good size rubbermaid container - what size will depend on how many flavors you have
for the 8ml vials like WL comes in, i use these http://www.amazon.com/Karter-Scientific-208U2-Plastic-Detachable/dp/B005Z4QWIK/
and 10ml bottles go in these (which are stackable) www.amazon.com/gp/product/B00EDHXTJA/
Get yourself a roll of this:
https://www.amazon.com/Parafilm-Roll-250-Length-Width/dp/B005KDF3X6
Cut a 2 inch square and stretch it over the opening. Keep thumb on top (don't need the lid) and you won't spill a drop. You can even leave it on and put the lid back on, the customer will need to break a little hole in it, but that's easy.
> For example, this box set contains almost all the colors you will ever need (other than specific ones). https://www.amazon.com/Miniature-Painting-Bonus-Wargamer-Regiment/dp/B01MTXRUUT/ref=sr_1_4?s=toys-and-games&ie=UTF8&qid=1524496671&sr=1-4&keywords=army+painter
These paints are great. I bought the same set and the dropper bottles are perfect for painting with a wet palette. I've grown to hate the GW paint pots. You can also use test tube holders to organize them at your painting station.
> Because I'm ignorant
Not ignorant, just hadn't asked yet. I use a pipette, others like a blunt syringe, both can be had cheap somewhere like Amazon or eBay. Can probably grab sample vials too. https://www.amazon.com/BCP-50pcs-Plastic-Graduated-Orange/dp/B07BBK3Y4D vials and https://www.amazon.com/Basic-Essential-Bottles-Disposable-Graduated/dp/B073WLCQWD pipettes. $16 and set for all the ink you can imagine, both wash out so you will use these for long time.
I started using these recently and love them to keep all the little 8ml vials organized.
Sorry for the mobile link, I'm on my phone.
Karter Scientific 208U2 Plastic Test Tube Rack for 15/17mm Tubes, Holds 50, Detachable https://www.amazon.com/dp/B005Z4QWIK/ref=cm_sw_r_awd_iTanub1TME7EZ
I have like 6 of these test tube racks that work really well
I use this test tube rack from Amazon and it suits my needs well.
Edit: the comments from users on Amazon show a lot of pictures with razors in use.
If you are just looking for storage, I've been using these cheap ones from Amazon. They get the job done:
https://smile.amazon.com/Dianoo-Fountain-Large-Leather-Case/dp/B01A5D8RTC/ref=sr_1_8?ie=UTF8&qid=1482382346&sr=8-8&keywords=48-pen+cases
For display on a desk, I find that wooden test tube holders work really well. For instance,
https://smile.amazon.com/Eisco-Labs-Premium-Wooden-Holes/dp/B00I13ZNIC/ref=sr_1_5?ie=UTF8&qid=1482382410&sr=8-5&keywords=test+tube+holders
Looks like this test tube holder from amazon:
http://www.amazon.com/Karter-Scientific-208U2-Plastic-Detachable/dp/B005Z4QWIK/ref=sr_1_3?ie=UTF8&qid=1452305718&sr=8-3&keywords=test+tube+holder
This unit is pretty similar to the Goulet model, except it holds 50 samples instead of 40 and is only $6: http://www.amazon.com/gp/product/B005Z4QWIK/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B005OD7AEM/
4.6 and below and you're golden. I test every can right after I open them. Only takes a tiny little bit of the strip. I've tested maybe 25 cans so far and I don't think I've made a dent in the roll.
Especially helpful when you're growing weird varieties of tomato that have an unknown acidity.
edit: according to the reviews, you would think these are only ever used for testing the PH of kombucha or a woman's vagina.
Here is the product if youre interested!
Problem is that you can get a stand that isn't as fancy for way too cheap.
Personally, I have 3 of this one, and love it.
A few of these will make life easier for you.
Here it is: http://www.amazon.com/gp/aw/d/B00I13ZNIC
As for ease of disassembly, I'll report back when I get off work
There have been different suggestions for off-the-shelf accessories as well:
Get one from amazon, it'll be cheaper!
ETA: link $6 bucks!
yeah right now I'm using a test tube rack to hold my razors and my brushes are just sitting on my counter kinda out of the way
I use this one: https://www.amazon.com/gp/product/B005KDF3X6
But the 1 inch roll would probably work well also.
Mine is this one from Goulet, but once I got more than 40 vials I took it apart and laid the two layers side by side across a box (9.5" wide) I had handy. There are also racks like this one on amazon.
I fill with a syringe unless I am using my lamy 2000. Goulet pens actually sells an ink syringe and test tube rack but I got this one from amazon.
http://amzn.com/B005Z4QWIK
I have http://amzn.com/B005Z4QWIK (the third rack in your first set of links) and it works really well for the small 8ml glass vials. It wouldn't fit anything much larger, though.
http://www.amazon.com/gp/aw/d/B005Z4QWIK
I have 4 of them now. Worth every cent. Just going to suck when I start getting more bottled flavors since they're easier for by weight.
It is a test tube holder, but it's a pretty damn genius idea for holding pens too - I may need to grab one myself.
The roll I bought was only $25 at amazon. That's 250 feet, or enough to wrap 750 plates and comes out to around 3 cents per plate. Not bad IMO.
you could buy one from amazon for cheaper
Here you go
Karter Scientific 208U2 Plastic Test Tube Rack for 15/17 mm Tubes, Holds 50, Detachable https://www.amazon.com/dp/B005Z4QWIK/ref=cm_sw_r_cp_api_i_pWFDCbW4RRGJ5
$5.50 on Amazon and Prime eligible.
Test tube stand from Amazon.
Eisco Labs Premium Wooden Test Tube Rack, (6) 22mm Holes, 9.5" Long https://www.amazon.com/dp/B00I13ZNIC/ref=cm_sw_r_cp_api_GUoqybG0BXT77
I got it off amazon for about 12 bucks with prime shipping.
test tub holder
Eisco Labs Premium Wooden Test Tube Rack, (6) 22mm Holes, 9.5" Long https://www.amazon.com/dp/B00I13ZNIC?ref=yo_pop_ma_swf
I use this but it's unavailable.
This would work.
http://www.amazon.com/Karter-Scientific-208U2-Plastic-Detachable/dp/B005Z4QWIK/ref=sr_1_2/191-6961186-0494741?ie=UTF8&qid=1398464400&sr=8-2&keywords=test+tubes+racks
6 bucks
Ωραίες οι κασσετίνες, αλλά ψάχνω display stand. Kάτι σαν αυτό αλλά ποιό σουλουπομένο
> Αν θες να κλαψουμε παρεα, ειχε ο πατερας κατι πενες απο τον παππου του, 80-100 ετων πρεπει να ηταν και δεν τις βρισκουμε πουθενα πια, πρεπει να τις πεταξε η μανα μου πριν χρονια >_<
Ffffffffffffuuuuuuuuuuuuuu
We use these in a chemical lab.
Here you go!
https://www.amazon.com/dp/B005Z4QWIK/ref=cm_sw_r_cp_api_7Hqtzb5A24BNF
I use a test tube holder
I take the blade out and dry it off but use it multiple times.
I combine aftershave balm and splash together and apply it to a damp face.
I use one of these test tube holders,. It's just about full though, so either I'll need to get another or user up some ink.
I think this is it https://www.amazon.com/gp/aw/d/B00I13ZNIC/ref=mp_s_a_1_9?ie=UTF8&amp;qid=1518324139&amp;sr=1-9&amp;pi=AC_SX236_SY340_FMwebp_QL65
Could use a large test tube rack too: https://www.amazon.com/gp/aw/d/B00I13ZNIC/
https://smile.amazon.com/gp/product/B00I13ZOUO/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1
I got these: https://smile.amazon.com/gp/product/B005OD7AEM can't comment on the accuracy but they have worked so far for me. Water is a dark green, honey I tested was more of a yellow. Will be using it to test sauerkraut soon
I have seen these used before -
http://www.amazon.com/gp/aw/d/B00I13ZNIC/ref=ox_sc_saved_image_24?ie=UTF8&amp;psc=1&amp;smid=ACTB8CBED46SR
http://www.amazon.com/gp/product/B005Z4QWIK?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o05_s00
https://www.amazon.com/gp/aw/d/B005Z4QWIK/
Goulet sells a similar, if not identical one.
No worries - I've got your Octomore poured. Check out my open inventory and let me know if you see anything else you'd like as a swap for 2 samples of the Kavalan. If not, I'm good just doing the singles. Inventory: https://redd.it/5i7zpv
As for the sample bottles, here's the stuff I use: https://www.amazon.com/dp/B01JL61KNE/ref=cm_sw_r_cp_ep_dp_ApXyyb4Z45MK5
When filling, only fill to the bottom of the neck (just below where the thread starts, and tighten that cap well. You can also use this stuff to put over the top of the cap: https://www.amazon.com/dp/B005KDF3X6/ref=cm_sw_r_cp_ep_dp_OqXyyb0D6A5EN
No. I got the rack from amazon. https://www.amazon.com/gp/product/B005Z4QWIK/
I got the test tube holder here and cut stick on felt to size for the sides and circles for the bottom.
This. IIRR StarSan should be a 3 or lower.
http://www.amazon.com/dp/B005OD7AEM/
lay it on its side. razors don't need to be stood up or suspended in mid-air. IMO that justs makes them more likely to get knocked over.
the razor i am using for the week or whatever sets on the counter, rest of them sit in a test tube rack under the sink.