Reddit mentions: The best leak detection tools
We found 6 Reddit comments discussing the best leak detection tools. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Amprobe GSD600 Gas Leak Detector
- Detects leaking gas in closed piping systems
- Semiconductor sensor detects methane and propane .Response time: less than 10 seconds Warm up time: less than 60 seconds
- Flexible stainless steel probe provides access to hard-to-reach areas
- Audible buzzer and a display panel with light-emitting diodes (LEDs) indicate presence and concentration of detected gas
- Automatic calibration at start-up helps ensure accuracy
Features:
Specs:
| Color | Red |
| Height | 3.1 Inches |
| Length | 11.8 Inches |
| Number of items | 1 |
| Weight | 1.873929227 Pounds |
| Width | 8.2 Inches |
2. Rectorseal 65554 8-Ounce Bottle Better Bubble Leak Locator
- It is the newest and most advanced leak locator formula
- It detects leaks of refrigerant gases, air, oxygen, and most other gases
- Its thick formula can be used at various temperature and pressure applications
- It is biodegradable
- It will not corrode metal surfaces or attack plastic or rubber
Features:
Specs:
| Height | 2.5 Inches |
| Length | 2.5 Inches |
| Number of items | 1 |
| Size | Pack of 1 |
| Weight | 0.6 Pounds |
| Width | 6 Inches |
3. Smoke Pen, 3 Hours
Dense white smoke for easy viewing of air flow and leaksContinuous stream that can be started and stopped. Total burn time, 30 minutes per wick.Safe, non-toxic, no ash or residueLight with match or cigarette lighter, Not for use near combustible gasesContains: 1 Smoke-Pen with 6 wicks
Specs:
| Height | 6.1 Inches |
| Length | 0.51 Inches |
| Size | Set of 1 |
| Width | 0.51 Inches |
4. Amprobe ULD-300 Ultrasonic Leak Detector
Senses pressurized leaks, detects electrical arcing, and finds failing solenoids, valves, and bearingsUltrasonic sensor converts ultrasonic frequencies to an audible range so they can be heardDetects any pressurized leaking gas, including chlorofluorocarbon (CFCs), hydrofluorocarbon (HFCs), nitrogen...
Specs:
| Height | 5.7 Inches |
| Length | 12.4 Inches |
| Number of items | 1 |
| Weight | 1.3889122506 Pounds |
| Width | 10.5 Inches |
5. Replacement Touch Probe for Superior AccuTrak VPE Series Ultrasonic Leak Detector.
- Replacement Touch probe for Superior AccuTrak Ultrasonic Leak Detector models: VPE BASIC; VPE; VPE-PRO; VPE-PLUS; VPE-PRO-PLUS.
- This probe is NOT compatible with VPE-1000 or VPE-GN (Goose-Neck) Series.
Features:
Specs:
| Weight | 0.000625 Pounds |
🎓 Reddit experts on leak detection tools
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where leak detection tools are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Leak Detection Tools:
Summary
1. Amprobe GSD600 Gas Leak Detector
- Detects leaking gas in closed piping systems
- Semiconductor sensor detects methane and propane .Response time: less than 10 seconds Warm up time: less than 60 seconds
- Flexible stainless steel probe provides access to hard-to-reach areas
- Audible buzzer and a display panel with light-emitting diodes (LEDs) indicate presence and concentration of detected gas
- Automatic calibration at start-up helps ensure accuracy
Features:
Specs:
| Color | Red |
| Height | 3.1 Inches |
| Length | 11.8 Inches |
| Number of items | 1 |
| Weight | 1.873929227 Pounds |
| Width | 8.2 Inches |
2. Rectorseal 65554 8-Ounce Bottle Better Bubble Leak Locator
- It is the newest and most advanced leak locator formula
- It detects leaks of refrigerant gases, air, oxygen, and most other gases
- Its thick formula can be used at various temperature and pressure applications
- It is biodegradable
- It will not corrode metal surfaces or attack plastic or rubber
Features:
Specs:
| Height | 2.5 Inches |
| Length | 2.5 Inches |
| Number of items | 1 |
| Size | Pack of 1 |
| Weight | 0.6 Pounds |
| Width | 6 Inches |
3. Smoke Pen, 3 Hours
Dense white smoke for easy viewing of air flow and leaksContinuous stream that can be started and stopped. Total burn time, 30 minutes per wick.Safe, non-toxic, no ash or residueLight with match or cigarette lighter, Not for use near combustible gasesContains: 1 Smoke-Pen with 6 wicks
Specs:
| Height | 6.1 Inches |
| Length | 0.51 Inches |
| Size | Set of 1 |
| Width | 0.51 Inches |
4. Amprobe ULD-300 Ultrasonic Leak Detector
Senses pressurized leaks, detects electrical arcing, and finds failing solenoids, valves, and bearingsUltrasonic sensor converts ultrasonic frequencies to an audible range so they can be heardDetects any pressurized leaking gas, including chlorofluorocarbon (CFCs), hydrofluorocarbon (HFCs), nitrogen...
Specs:
| Height | 5.7 Inches |
| Length | 12.4 Inches |
| Number of items | 1 |
| Weight | 1.3889122506 Pounds |
| Width | 10.5 Inches |
5. Replacement Touch Probe for Superior AccuTrak VPE Series Ultrasonic Leak Detector.
- Replacement Touch probe for Superior AccuTrak Ultrasonic Leak Detector models: VPE BASIC; VPE; VPE-PRO; VPE-PLUS; VPE-PRO-PLUS.
- This probe is NOT compatible with VPE-1000 or VPE-GN (Goose-Neck) Series.
Features:
Specs:
| Weight | 0.000625 Pounds |
FWIW it's referred to as the air conditioner "condenser". But do call a tech out if you think you've smelled gas; they'll have a device that can lead them to any gas leaks pretty quickly. It won't be a wild goose chase like you might be thinking with the whole family sniffing the air around your house looking for a leak :)
I have a working furnace again! Gas valve was the culprit. Fixed it for less than $100 for parts and tools. Thanks for the help.
Original Gas Valve - 36E22 202 ( B12826-14 )
Replacement Gas Valve - 36G22-254
https://www.amazon.com/White-Rodgers-36G22-254-Opening-Single-Natural/dp/B00M21Z6GI
FOSHIO HVAC Gas Pressure Tester
https://www.amazon.com/FOSHIO-Display-Manometer-Pressure-Differential/dp/B078NS5FWN
Bubble Leak Locater
https://www.amazon.com/Rectorseal-65554-8-Ounce-Bottle-Locator/dp/B002YFHXY0
Yellow Gas Tape
https://www.amazon.com/Mill-Rose-70820-3-Wrap-Yellow-Tape/dp/B00O94MZPG
In the US, states can regulate venting and flaring:
There are also commercial opportunities to detection and eliminate leaks, especially in old oil and gas infrastructure:
EDF has led some good work on leak detection.
http://www.amazon.com/REGIN-HVAC-SMOKE-WICKS-HOURS/dp/B00788GC6S
That's the most common to use. Punk is a wood based stick, a lot like incense. It works faster because something is actually burning.
I remember you posted this question before. Here is exactly what you are looking for.
No need to build anything, just get this.
And here is a much smaller device called a draft finder, probably better for what you are looking for.
It looks like the touch probe from an ultrasonic leak detector. Something like this, but with a different style connector.
Have you have any work done on your car recently? A mechanic might have left it in there by accident.