#13 in Body repair & restoration adhesives
Use arrows to jump to the previous/next product
Reddit mentions of 3M Auto Glass Urethane Windshield Adhesive, 08693, 10.5 fl oz Cartridge
Sentiment score: 2
Reddit mentions: 7
We found 7 Reddit mentions of 3M Auto Glass Urethane Windshield Adhesive, 08693, 10.5 fl oz Cartridge. Here are the top ones.
or
- Fast-curing adhesive produces rapid results
- Formulated as a medium viscosity and non-sag adhesive for easy and clean application
- High bond strength designed for windshield bonding and stationary glass attachment
- Adhesive properties meet many application demands and strength requirements
- For industrial/occupational use only. Not for consumer sale or use.
Features:
Specs:
| Color | White |
| Height | 1.9 Inches |
| Length | 8.85 Inches |
| Number of items | 1 |
| Size | 10.5 Fluid Ounce |
| Weight | 0.9125 Pounds |
| Width | 2.65 Inches |
3M makes the best. Clean all the crap off the body and the window before putting new glue on it. Let the glue setup a little before installing the window or it will be a slippery mess.
https://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK
Youtube will help you install and remove. Basically like /u/th7957 says you get a wire between the window frame and glass and cut the seal to get the glass out. Then you have the fun endeavor of cleaning the old gasket/sealant out.
Check out part suppliers that specialize in that vehicle for that window seal if it is available. It is more common to use window adhesive but I personally would rather use the correct gasket if it is an option. My guess is you will end up using the adhesive though.
Here..http://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK/ref=sr_1_1?s=automotive&ie=UTF8&qid=1462847526&sr=1-1&keywords=auto+window+adhesive…. ya go
You need to get all of the old off first. And wipe it down with solvent[KEEP IT OFF THE PAINT!!!!!] Perhaps tape the area off first
[That stuff just so happens to be on sale (-$3) at Amazon right now for $11.99 shipped w Prime. FYI.](https://smile.amazon.com/dp/B000RW1XCK/ref=cm_sw_r_tw_dp_U_x_ZsvvDbQ3DB4W9 via @amazon)
A good glass shop?
OK, these windows are a royal PITA. You have to cut off the old rubber, remove the glass (carefully!) and clean the glass spotlessly clean, clean the opening (again, spotless) as well. You then need the proper sealant (possibly urethane?)
And you'd need the rubber weatherstripping. It has to be cut to size, and spliced (fun... basically using superglue).
I'm sure there are YouTube videos on it, basically a piece of cord to install the glass, and some sweat and work.
I'll use windshield caulking https://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK
https://www.amazon.com/3M-08609-Window-Weld-Urethane-Cartridge/dp/B000FW61EW
They use polyurethane adhesive for windshields, so i'm guessing that would probably work fine for your mirror.
I don't think it comes in smaller containers than this for the 3m stuff though https://www.amazon.com/3M-08693-Urethane-Windshield-Cartridge/dp/B000RW1XCK/ref=sr_1_1?ie=UTF8&qid=1493075069&sr=8-1&keywords=3m+polyurethane