#29 in Wrenches
Use arrows to jump to the previous/next product
Reddit mentions of ACDelco Tools 3/8” Digital Torque Adapter (5.9-59 ft-lbs) with Audible Alert ARM602-3, Red
Sentiment score: 3
Reddit mentions: 4
We found 4 Reddit mentions of ACDelco Tools 3/8” Digital Torque Adapter (5.9-59 ft-lbs) with Audible Alert ARM602-3, Red. Here are the top ones.
or
Static torque measurementStandard functions: torque setting, measurement setting, mode settingOperation in both clockwise and counter-clockwise directionsLCD display shows N-m (or kg-cm, in-lb, ft-lb) measurementsAudible torque confirmation by means of buzzer
Specs:
| Color | Red |
| Height | 3 Inches |
| Length | 1.75 Inches |
| Number of items | 1 |
| Size | 3/8" Drive |
| Weight | 0.31 Pounds |
| Width | 1.75 Inches |
They do make one that has a more reasonable torque range for bikes. https://www.amazon.com/gp/product/B004VYUKTC
It's nice in that it measures torque for left-handed threads as well. I use it for pedals and bottom brackets mostly.
I use the AC-Delco electronic ones. They come with calibration results that show they are very accurate at their minimum reading.
As others have said, gauges typically aren't accurate at low/high readings.
I highly recommend an electronic torque wrench.
The mechanical ones are very inaccurate at the bottom end of range. Head bolts are often at the bottom or below what they can even be set to.
I use this one and it works amazingly well. It can accurately go down to 3ftlb. You can set the desired torque and it has a beep alarm as you approach, reach, and go over the threshold. https://www.amazon.com/gp/product/B004VYUKTC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I also recommend flying with a very basic set of tools. I fly with some hex keys and wrench that fits all the sizes on my paramator. https://www.amazon.com/gp/product/B01F512F74/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Siphon is nice to get fuel out of paramotor. This one works amazingly for me. https://www.amazon.com/gp/product/B07CKW15ZS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Radio chest harness. https://www.amazon.com/gp/product/B007HJKSG8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I added a draw cord to attach my phone to. Phone then tucks into the velcro pocket and is secured by one of these: https://www.amazon.com/gp/product/B01H4E9Z6O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 It's powerful enough to draw in a medium weight phone.
Hook knife: https://superflyinc.com/products/jack-the-ripper-hook-knife
Power floats: https://glidersports.com/shop/powerfloat-2bsure/
Waste flotation: https://www.amazon.com/gp/product/B013RLI9XS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Cut prop tape strips out of this: https://www.amazon.com/Scotchgard-Clear-Paint-Protection-60-inches/dp/B004VG8DS0/ref=sr_1_9?s=automotive&ie=UTF8&qid=1534535837&sr=1-9&keywords=3m+scotchgard
RTV silicon to put on exhaust springs to reduce vibration fatigue: https://www.amazon.com/Rutland-500%C2%B0RTV-High-Silicone-Black/dp/B000H5Y6CQ/ref=sr_1_5?s=home-garden&ie=UTF8&qid=1534352404&sr=1-5&keywords=heat+resistant+silicon+rtv
Motor tachometer: https://www.amazon.com/gp/product/B01GTP6ORC/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Radio: I recommend the FT60 or FT65. The 60 model is tried and true and can also be modded to RX aviation band. FT65 has newer display and is cheaper having been made in China.
I've had bad luck with torque wrenches in the past, so I decided to go a different route. I gave some "Torque Adapters" a try from ACDelco, and I was really pleasantly surprised! They come in 1/2 inch and 3/8th inch flavors. They are quite easy to use as well!