Reddit mentions of Wera Kraftform Kompakt 62 Bitholding Screwdriver and Pouch Set, 33-Pieces

They’re Torx Security bits. The Wera Kraftform Kompact set has the right tip for them. https://www.amazon.co.uk/dp/B000NI7RRS/ref=cm_sw_r_cp_api_i_8Qy5CbHFZBQNT

Dude, you should see my Amazon wish list......full of Wera stuff, but yeah, my wallet cringes each time I start browsing Wera. Really want these and this and these (although I have the same set, just with less bits) and these and this and this to put it all in..........that's like half the wishlist 😆

Wera Kraftform Kompakt 62 Bitholding Screwdriver and Pouch Set, 33-Pieces https://www.amazon.com/dp/B000NI7RRS/ref=cm_sw_r_cp_api_isG3xbM1ZJ55D

I really wanted the set I found because they were all long and it had the torx and Allen bits to go in my truck box. I find that when the bit only sticks out of the thick poorly made holder a small amount it can really get in the way when there are close tolerances or if a screw is recessed in a hole.

At home I have sets of this kind of thing http://www.amazon.com/Xcelite-Chromium-Vanadium-Steel-Screwdriver/dp/B007NLPUXG , but filling up two drawers with those in my truck box and fitting everything else isn't doable.

http://www.amazon.com/Wera-Kraftform-Bitholding-Screwdriver-33-Pieces/dp/B000NI7RRS/ref=sr_1_2?s=industrial&ie=UTF8&qid=1404427670&sr=1-2&keywords=wera+kraftform this is the wera I mentioned and probably the best solution, but I just didn't want to spend that much this week.

I was lucky enough to find one of these. Probably one of the best sets I've ever used.

It's a bit over the budget of 50 bucks. But I have this set (actually mine has a ratchet handle but can't seem to find that). This is probably the best thing I have in my toolbox. I work in wind energy and this thing is a work horse in my house and out in the field. I love it.

https://www.amazon.com/gp/aw/d/B000NI7RRS/ref=mp_s_a_1_6?ie=UTF8&qid=1510208455&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=wera+kraftform&dpPl=1&dpID=41aFHGJxLRL&ref=plSrch

I have found some tools that get good reviews and keep weight down:
https://www.totaltools.com.au/68591-bahco-3-piece-ratchet-spanner-set-s4rm3t

http://www.knipex.com/index.php?id=1216&L=1&page=art_detail&parentID=1368&groupID=1500&artID=34171

https://www.amazon.com/Wera-05051024001-Kraftform-Bitholding-Screwdriver/dp/B001HSNHM2

https://www.amazon.com/Wera-Kraftform-Bitholding-Screwdriver-33-Pieces/dp/B000NI7RRS

https://www.toolstop.co.uk/bahco-268-mini-hacksaw-6-inch-150mm-p28022

which bit set did you get?

i see this kit, but it's not ratcheting: https://www.amazon.com/Wera-Kraftform-Bitholding-Screwdriver-33-Pieces/dp/B000NI7RRS

i see this racheting driver: https://www.amazon.com/Wera-Kraftform-Bitholding-Ratcheting-Screwdriver/dp/B004VMWZV0/

but i don't see a kit that has the bits and the ratcheting driver. do they make t he above set but without the driver so that i can get the ratchet one separately?

I just randomly stumbled across this...

For lighting, I use these for like 90% of the work. The other 10% is for special occasions that rarely come about, but if you're in LX then it's a solid investment:

• I have 2x of these and rarely use a C-wrench. Ultimate focus tool.
  
  
• Wera Kit -- (works nice with impact drivers too)
  
  
• A nice pair of 6-8" dikes.
  
  
• Headlamp REI has a huge selection. I prefer ones with red lights available so if you're backstage and it's dark you don't blind everyone.
  
  
• I see people with these folding utility knives a lot, though, I've never been a fan.
  
  
• Medkit (because I'm prone to accidents (also works as a pillow))
  
  
• 5.11 taclite pants are the best things ever. They'll last forever and they have kneepad inserts!
  
  The other 10% is just unique situations. You don't need a cable tester if you have a multimeter, you can invest in that later if you really use it that much. It does make things quicker though. Whomever you're working for should provide gaff, sharpies, notepad. You can invest later if you find you need it a lot.
  If you're up in the air a lot and tired of using phone cable or tripping on tieline for your wrench lanyard, then use a pistol lanyard; it's nice and rated and keeps out of the way. Scaff wrench? maybe if you're working with truss a lot, even then you're using it 10% of the time and you need a mallet to go with it. I'd also recommend steeltoed boots, for when idiots drop scaff wrenches on your foot. RedWing will last you forever and they have warranties. I like military/ tactical ones though, 'cause they're built for the beating and you can find breathable ones easily.
  
  Alright I'm done. I don't even know how I got here....
  
  
  > EDIT: I also live in southern California if anyone would like to give me some good stores I could probably browse around.
  
  
• Barbizon is amazing (not the talent company)
  
  
• Tour Supply is great when you're not spending your own cash
  
  
• Studio Depot -- Not sure if actual store you can walk around, or warehouse.

Buy here: http://www.amazon.com/Wera-Kraftform-Bitholding-Screwdriver-33-Pieces/dp/B000NI7RRS

I mean what are you even using that Milwaukee thing for?

https://www.homedepot.com/p/Milwaukee-6-in-5-TPI-AX-Carbide-Teeth-Demo-Nail-Embedded-Wood-Cutting-SAWZALL-Reciprocating-Saw-Blade-1-Pack-48-00-5221/300122018

https://www.homedepot.com/p/Milwaukee-6-in-24-Teeth-per-in-Thin-Metal-Cutting-SAWZALL-Reciprocating-Saw-Blades-5-Pack-48-00-5186/100050151



The saw zall blade isn't as efficient as the the actual rock knife but it's close enough and it means you get to carry 1 less thing. In this case maybe 2


Edit:. Replace all those screwdrivers with this https://www.amazon.com/dp/B000NI7RRS/ref=psdc_553336_t3_B001HSNHM2

All the but have a long shank so it will fit anywhere. You can take out the shit you won't use and it will be lighter and take less room