Reddit mentions: The best power belt sanders
We found 26 Reddit comments discussing the best power belt sanders. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 18 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EX ELECTRONIX EXPRESS Mini 1 x 30 Belt Sander 3400 RPM
- Belt Sander Size: 1" x 30"
- Vacuum Diameter: 1-3/4"
- Power: 120 VAC, 60Hz, 3.0 AMP, 360 Watts
- Motor: 1/3 HP @ 3400 RPM
- Table Size: 5" x 5" ; Table Tilt: 0 ~ 45º
Features:
Specs:
Color | Green |
Height | 10 Inches |
Length | 14.5 Inches |
Number of items | 1 |
Weight | 1.11 Pounds |
Width | 10 Inches |
2. 3/8"" x 21"" Belt Sander
Compact design for sanding in close quarters ; 8.2 feet power cord for increased maneuverabilityVariable speed control dial (980-5,600 ft./min.) enables user to match the speed to the applicationAdjustable sanding arm pivots 100° for hard-to-reach areasEasily adjustable belt tracking with a turn of...
Specs:
Color | Blue |
Height | 6.2204724346 Inches |
Length | 16.535433054 Inches |
Number of items | 1 |
Weight | 3.527396192 Pounds |
Width | 3.0708661386 Inches |
3. Grizzly G1015 Knife Belt Sander/Buffer
Item may ship in more than one box and may arrive separatelyAlthough we call this a -Inch Knife Belt Sander -Inch it is actually a very versatile sander with many different woodworking usesAuxiliary arbor accepts buffing wheels sanding drums or flap wheelsBelt can be changed in seconds with quick-re...
Specs:
Color | Black |
Height | 15 Inches |
Length | 30.5 Inches |
Number of items | 1 |
Weight | 111 Pounds |
Width | 16.25 Inches |
4. Chicago Pneumatic CP858 Belt Sander - 3/8-Inch Belt
- Country of Origin:Japan
- Package length:18.0"
- Package width:18.0"
- Package height:21.0"
Features:
Specs:
Height | 2.99212 Inches |
Length | 12.40155 Inches |
Number of items | 1 |
Size | 10mm |
Weight | 1.88 Pounds |
Width | 5.70865 Inches |
5. DEWALT DW433 8 Amp 3-Inch by 21-Inch Variable Speed Belt Sander with Dust Canister
Powerful 8.0 Amp motor aggressively removes material in a variety of applicationsAll-metal housing increases durability during a dropThree wheel design delivers lowest center of gravity; longest 3-inch by 21-inch platen availablevariable speed dial allows user to vary speed for specific materials an...
Specs:
Height | 8.63 Inches |
Length | 14.88 Inches |
Weight | 14 Pounds |
Width | 7.75 Inches |
6. Makita 9403 4" X 24" Belt Sander
Quietest belt sander in its class: only 84 decibals4 inch wide belt with a speed of 1,640 feet per minute for fast material removalLabyrinth construction seals motor and bearings from contaminationLarge front grip is positioned for operator comfort. Variable speed control dial : No13 pounds; 1 year ...
Specs:
Color | Teal |
Height | 9.76 Inches |
Length | 9 Inches |
Number of items | 1 |
Size | One Size |
Weight | 13 Pounds |
Width | 16.1 Inches |
7. SKIL 7510-01 Sandcat 6 Amp 3-Inch x 18-Inch Belt Sander with Pressure Control
- Pressure control technology monitors sanding pad pressure applied for optimal finish
- 6.0 A of power sands any type of wood surface
- Micro-filtration – captures and contains fine dust particles
- Auto track belt alignment keeps belt centered
- Vacuum compatible – fits standard 1-1/4 In. vacuum hoses.Flush edge sanding sands right up to the edge for maximum capacity
Features:
Specs:
Color | Red |
Height | 5.75 Inches |
Length | 12.25 Inches |
Number of items | 1 |
Release date | October 2018 |
Size | 1-(Pack) |
Weight | 5.51 Pounds |
Width | 6.25 Inches |
8. Dynabrade 11477 Dynabelter Abrasive Belt Tool
For weld blending and finishing, on metal and other surfacesUses include grinding cylinders, deburring castings, cleaning welds and fabricating metalsPackage Height: 7.5"Made in United States
Specs:
Height | 7.5 Inches |
Length | 18.5 Inches |
Number of items | 1 |
Weight | 15.65502522462 Pounds |
Width | 12.5 Inches |
9. Kalamazoo 1SM 1" Belt Sander, 32 lbs, 1725 RPM, 1/3 HP Motor, 1" x 42" Belt, 4" Contact Wheel
- Sold on Amazon
Features:
Specs:
Number of items | 1 |
Weight | 32 Pounds |
10. Kalamazoo Industries 2FSM 2" X 48" Abrasive Belt Sander W/ Motor
- Use vertically or horizontally. Tilt table, 5" contact wheel and removable platen.
- Uses 2" x 48" belts.
- Motor: direct drive 1/2 HP, 1 PH and switch
- Speed: 3,450 RPM
- Full hinged guard for quick belt change.
Features:
Specs:
Number of items | 1 |
11. Makita 9903 8.8 Amp 3-Inch-by-21-Inch Variable Speed Belt Sander with Cloth Dust Bag
Powerful 8.8 AMP motor; only 85dBVariable speed control dial (690-1,440 ft./min.) enables user to match the speed to the applicationAuto-tracking belt system tracks belt without adjustmentInnovative design for sanding flush to wall with nose and side of sanderFront grip design for comfortable operat...
Specs:
Color | Teal |
Height | 6.19 Inches |
Length | 11.63 Inches |
Number of items | 1 |
Size | 3" x 21" (76 x 533 mm) |
Weight | 9.5 Pounds |
Width | 5.63 Inches |
12. Dynabrade, 15003, Air Belt Sander, Industrial, 0.4 HP, 1/8, Teal
- DYNAMIC DYNABRADE DYNAFILE: Our belt tool is ideal for strap polishing and working in narrow openings. Use it to grind, deburr, blend, polish, finish, and more. Applicable on a variety of surfaces.
- VERSATILE PERFORMANCE: Handle design has 7 degree offset. Head pivots 360 degrees. Belt guard detaches with an adjustment knob. Converts to a die grinder with 1/4" Threaded Collet Insert (01644).
- CONTACT ARM INCLUDED: This tool has a Contact Arm (15026) and Drive Wheel (15118) for use with 1/2" wide by 12" belts, with more contact arms. Rubber Drive Wheel (40378) may be ordered separately.
- PNEUMATIC MOTOR: Air-powered motor runs at 0.4 hp, up to 25,000 RPM. The motor's pneumatic design ensures tool is lightweight, versatile, easier to maintain, and powerful. Rear exhaust diverts dust.
- PNEUMATIC MOTOR: Air-powered motor runs at 0.4 hp, up to 25,000 RPM. The motor's pneumatic design ensures tool is lightweight, versatile, easier to maintain, and powerful. Rear exhaust diverts dust.
Features:
Specs:
Color | Factory |
Height | 1 Inches |
Length | 1 Inches |
Number of items | 1 |
Size | Full Size |
Weight | 1.69976404002 Pounds |
Width | 1 Inches |
13. Olson Saw SC91262BL Scroll Saw Sander with 1/4-Inch Wide Assorted Grits, 4-Pack
Scroll Sander sanding belts easily smooth the edges of scroll saw projects in wood, plastic, metal and compositesThese fabric-backed belts have molded polycarbonate ends for attaching to most scroll saws that take 5" bladesThey also work great on curves, concave or convex edges and can reach into in...
Specs:
Height | 1 Inches |
Length | 2 Inches |
Number of items | 4 |
Weight | 0.04 Pounds |
Width | 8.5 Inches |
14. PORTER-CABLE 360VS 12 Amp 3-Inch by 24-Inch Variable Speed Belt Sander
Powerful 12 Amp motorQuick-release belt-change leverMotor is located over platen for maximum performance and perfect balancePowerful 12 Amp motorQuick-release belt-change leverMotor is located over platen for maximum performance and perfect balanceBelt and gear drive system transfers power from the ...
Specs:
Color | Gray |
Height | 10.25 Inches |
Length | 17.75 Inches |
Number of items | 1 |
Size | 3 x 21 |
Weight | 14.5 Pounds |
Width | 10 Inches |
15. Ryobi BE319 6 Amp Portable 320 Feet / Minute Corded Belt Sander (3” x 18”) w/ Onboard Removable Dust Bag (Medium Grit Sanding Belt Included)
Brand New in box. The product ships with all relevant accessories
Specs:
Height | 6.61 Inches |
Length | 13.6 Inches |
Weight | 6.18 Pounds |
Width | 3 Inches |
16. WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Sturdy cast iron base prevents any heavy vibrations
- 4.3 Amp motor provides up to 3600 RPM
- Tension release lever provides for simple changes between sandpaper grits
Features:
Specs:
Height | 12.5 Inches |
Length | 22 Inches |
Number of items | 1 |
Size | 6-inch Disc w/ Cast Iron Base |
Width | 11 Inches |
17. PORTER-CABLE 362V 4-Inch by 24-Inch Variable Speed Belt Sander
- owerful 12.0 amp motor provides professional power
- Motor is located over platen for maximum performance and perfect balance
- Designed for flush sanding up to vertical surfaces
- Variable-speed dial is conveniently placed on the handle
- allows belt speed adjustment from 1,000 to 1,500 SFPM
Features:
Specs:
Height | 31.25 Inches |
Length | 25.25 Inches |
Number of items | 1 |
Width | 26.25 Inches |
18. Knife Sharpener Machine, KKmoon 220V Multifunctional belt sander Knife Edge Sharpener Grinding Polishing Machine
【High Quality】:The belt sander sharpener is made of fine quality metal, not easy to rust, wear-resistant, has a long service life.【Sturdy】:The base is stable and sturdy, can be placed on the table, labor-saving.Built-in double bearing, non-slip and dustproof.【Special Design】:The desi...
🎓 Reddit experts on power belt sanders
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power belt sanders are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I'm dealing with the same issue. I've had the opportunity to use the Grizzy sander but not extensively, seems good for dressing tools but I don't know about large amounts of stock removal. Belt grinders are just so expensive!
http://www.amazon.com/Grizzly-G1015-Knife-Sander-Buffer/dp/B0000DD0AL/ref=pd_sxp_grid_i_1_0
This one is the next step up I would say, a true belt grinder for not a bad price, just still a bit out of my budget and there are apparently a few problems with it. I wish I had a first hand account of whether it was worth it because it seems perfect.
That is not an electronic kitchen knife. It appears to be filing or sanding it(friction not cutting). It also created a ton of foam dust which normal cutting doesn't. I cut with a Bosch foam saw and carving knife everyday. There is no way he could achieve that perfectly smooth round shape with either one.
Edit: I'll have to go back and rewatch it but if I remember correctly it was an air tool not an electronic tool.
Edit 2: yep it's defintely a pneumatic tool. I'm almost positive its s handheld belt sander. Save the sass unless you know exactly what you're talking about.
You can definitely make knives on the kitchen counter!
You'll need a way to heat it up, either to aid with forging and heat treating if you go the blacksmithing route, or as the first step in heat treating, if you're going the stock removal route.
A two-brick forge is very cheap and only requires two soft (not the hard ones) kiln bricks and a propane or MAP gas torch - https://www.bladeforums.com/threads/virtual-bbq-2-brick-forge-wip.920120/
Just make sure you leave a window open for venting out any fumes, as one of the byproducts from propane or MAP gas being burned is carbon monoxide, and in an enclosed environment with no ventilation, that can kill you.
You can do stock removal very cheaply by hand with a jig like this one - https://www.youtube.com/watch?v=r9iNDRwwBQQ
I made one based on that video when I was starting out, and while it is very time consuming and manual labor intensive to use, the results were quite good.
A small benchtop 1"x30" belt sander can speed things up a great deal, like this one for $69 - https://www.amazon.com/Generic-Mini-Belt-Sander-3400/dp/B004D96ZCG/ref=sr_1_fkmr0_3?ie=UTF8&qid=1519657469&sr=8-3-fkmr0&keywords=craftsman+benchtop+belt+sander
Once you have it sanded / ground / hammered to shape, you heat it up until it glows bright orange, then you quench it in motor oil or hydraulic oil.
After it's cooled, pull it out and clean it off. Make sure to look for any cracks. If there are none, you can temper it in any standard home oven, as it will be extremely brittle at this point. It depends on the steel and the desired final hardness as to what temperature you'll set the oven to, but 300 to 350 degrees Fahrenheit is common.
After that, put a handle on it, sharpen it up and you're done!
If I had my choice of tool, I'd probably say some sort of belt sander/grinder that has a small wheel or turnaround (like this) so you get a nice round profile. If you have something like that(I think they make some similar bench top things), I'd probably use a med/fine grit belt. Barring that, 2nd best is probably the dremel sanding wheel thing, also using a med/fine grit wheel. I'd put the dremel in a vise sticking up and hold the work rather than the other way around too.
You could do this with a jig saw and could use a mini belt sander to clean it up. Or just hand sand her.
https://www.amazon.com/Makita-9032-4-4-Amp-8-Inch-Variable/dp/B0000614UT
I fuckin love this thing I rarely cope by hand anymore.
Oh yeah, I thought 1095 was stupid expensive until I found it on texas knifemaker supply for $8 per foot... so yeah, I'll be getting some of that. I need a belt sander, but can't get one at the moment. Do you think this is a good sander? Would it be useful for grinding bevels?
Hello, I want to make a simple knife. A balisong to be specific. I have no tools that I could make one with, and frankly I don't know what tools I would need. So I have lots of questions. Where do I buy my metal at? What type of metal (I don't need some super high-quality metal just something that won't bend if I drop it on the ground once or twice). What would I use for drilling holes, and lastly what would I use to shape the handles/blade(Would something like this work? http://www.amazon.com/Generic-Mini-Belt-Sander-3400/dp/B004D96ZCG/ref=lp_552878_1_19?s=power-hand-tools&ie=UTF8&qid=1462267395&sr=1-19) Thanks for the help in advance!
> never regret anything made by DeWalt
Tell that to my DW433 belt sander that pretty much started on fire in my hands.
DeWalt makes good stuff, but they've certainly had some dogs.
That being said, in the miter saw category, they're a leader.
any idea what belt grinder he is using, or are the adjustable ones pretty much standard
[edit] It looks like this one
Yeah, you can use a palm sander. It's just going to take forever.
Something like this belt sander https://www.amazon.com/7510-01-Sandcat-18-Inch-Pressure-Control/dp/B007A9TD3E/ is probably a good compromise between using a palm sander and using a big floor sander.
The amount of material you take off depends largely on the grit. 30 grit sand paper will take off a lot more floor than 100 git.
Though if your floor is so thin that you're worried about using a floor sander on it, you should probably start saving up to replace it.
This $390+ Makita belt sander from amazon is on a great sale now. $190 after the 25%. I just got mine and it is incredible. Super hefty, undeniable power. Only downside is the dust bag is not zipped, but some kind of cleat.
https://www.amazon.com/Makita-9403-Belt-Sander-Cloth/dp/B0000223IY/ref=mp_s_a_1_1?ie=UTF8&qid=1542064114&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=makita+belt+sander&dpPl=1&dpID=51lGQc2CPvL&ref=plSrch
I'd get a Dynabrade air sander or about 30 Skil sanders.
Maybe a grinder would be a good idea to take the larger seams off.
Grizzly is more of an industrial machine than Harbor Freight.
I also noted this item in my search: http://www.amazon.com/dp/B000REJM3K
Here is a good thread of small belt sanders: http://bbs.homeshopmachinist.net/threads/33705-Belt-Sander-1-x-42-Which-one
I think Kalamazoo makes a nice 2x48 close to your price range:
https://www.amazon.com/Kalamazoo-Industries-Abrasive-Sander-Motor/dp/B071NPJ2VN
That said, you'll end up spending far more in belts than on the grinder in the long run.
For the very hairy, and those hard to reach spots, I would recommend: http://www.amazon.com/Makita-9903-3-Inch---21-Inch-Variable/dp/B000056NOC/ref=sr_1_1?ie=UTF8&qid=1369764173&sr=8-1
im only on my third blade, and the first sander i bought was a 4x36 thinking the same thing. It ended up being a bit of a pain. I still use it for flattening all my edges and surface grinding. For actually grinding by bevels i have been using this https://www.amazon.com/Generic-Mini-Belt-Sander-3400/dp/B004D96ZCG/ref=pd_sbs_196_1?_encoding=UTF8&pd_rd_i=B004D96ZCG&pd_rd_r=BPYN0PVP11225WJZWP2Z&pd_rd_w=MEfYN&pd_rd_wg=H7m3J&psc=1&refRID=BPYN0PVP11225WJZWP2Z and its fantastic. plus, in this size you can search amazon for belt packs and get a set of various grits from 60 all the way to 600 in one package. Its also not gonna break the bank for your first grinder.
First I'll grind the welds to a rough radius with this 7" disc grinder.
http://www.amazon.com/Dynabrade-52563-7-Inch-Right-Sander/dp/B0027S6FVQ/ref=sr_1_1?s=hi&ie=UTF8&qid=1464233102&sr=1-1&keywords=dynabrade+52563
This is what i use to grind the weld seems to a fine radius.
http://www.amazon.com/Dynabrade-15003-Mini-Dynafile-Abrasive-12-Inch/dp/B00065TOR4
This is what I use to put the brushed finish on the surfaces. How ever the stainless we use already has a grain, but ill use the tool to clean up any scratches.
http://www.amazon.com/Air-Finishing-Tool-Kit-2800/dp/B002LZSNB0/ref=sr_1_2?s=hi&ie=UTF8&qid=1464232796&sr=1-2&keywords=13450+Dynisher+Finishing+Tool
It's a Grizzly G1015. 1000 times better than a harbor freight 1x30. Anyone who has used a more expensive grinder usually complain about the Grizzly's belt tracking, the platen's quality, and the small rest. Those issues can be addressed with some mods. For the price point, you can't beat it.
Edit: Gramerz
This used via craigslist: https://www.amazon.com/PORTER-CABLE-360VS-3-Inch-24-Inch-Variable/dp/B0000222XC
What u/Juskimo said:
https://www.amazon.com/SC91262BL-Scroll-Sander-4-Inch-Assorted/dp/B00CTGMOT8
I'm not sure you and I are operating with the same definition of portable.
Bench sander.
Portable sander.
I'd say this one is a hybrid.
What about this SKIL one for $39 I just want an electric belt sander where I can sand knives razor sharp so I'm guessing I need a low grit for changing the grind but a 1000 grit for quick sharpening before honing - https://www.amazon.com/7510-01-Sandcat-18-Inch-Pressure-Control/dp/B007A9TD3E/ref=sr_1_6?s=power-hand-tools&ie=UTF8&qid=1525733941&sr=1-6&keywords=belt+sander
Guess I could buy the $20 WEN rotary tool and try with the highest grit
I bought this little guy specifically for sanding 3D prints. Should work fine, if you're willing to drop $100 on it.
Although it's winter here so I haven't actually had a chance to test it out...
Guys, Google it
That's a 12 amp sander so it should have a lot of balls.
A few things.
1 don't hammer down on it. The weight of the sander is all you need. A lot of pressure will just make heat and glaze your belt.
2 what grit belt are you using?
3 did you install the belt the right way? Unless specifically stated belts are directional
holy amazon tracking link. can i ask that you remove everything but this part of the link?
https://www.amazon.com/KKmoon-Multifunctional-Sharpener-Grinding-Polishing/dp/B07MMLLWXH
the rest is so amazon can track where you came from and isn't necessary for the link to work. it also trips up reddits spam filter something fierce.
Yes, slack belt grinders are great for sword sharpening.
Review the video that /u/Azekh posted below. The grinder in the video is: http://www.amazon.com/gp/product/B004D96ZCG
Mike Edelson (the guy in the video) is amongst the foremost experts in the HEMA community on test cutting, and is single-handedly responsible for bringing japanese-style tatami cutting to HEMA. His method is the result of years of honing (pardon the pun) his skills.
I recently sharpened my new Albion Baron using this method, and it turned out fantastic, both in appearance as well as in cutting tatami. I've since sharpened weapons for others within my school. It's really great once you get the hang of it.
Summary of key takeaways (but watch the video, it's very important!):