Reddit mentions: The best power oscillating tool accessory kits
We found 7 Reddit comments discussing the best power oscillating tool accessory kits. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Dremel MM40-05 Multi-Max 3.8-Amp Oscillating Tool Kit with Quick-Lock Accessory Change Interface and 36 Accessories
- High-performance 3.8 Amp motor for the most demanding applications
- Quick-Lock for tool-less and secure accessory changes
- Quick-Boost - maintains constant speed throughout toughest applications and materials
- Quick-hold - magnetic flange holds the accessory in place for easier accessory changes
- Up-front on/off switch – for one-handed use and maintains speed setting
Features:
Specs:
Height | 10.5 Inches |
Length | 17.25 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 4.5 Pounds |
Width | 4.25 Inches |
2. Dremel MM388 Multi-Max Accessory Kit
- WHAT’S INCLUDED: (1) MM610 flexible scraper blade, (2) MM450 wood and drywall blades, and (9) MM70W wood sandpaper sheets
- WIDE-USE APPLICATION: Cutting Blades used for making precise cuts into wood and drywall. Scraper Blade used for removing soft adhesives like caulk, and sandpaper sheets used for sanding wood
- COMPACT CASE: Clear reusable storage case included to keep accessories organized
- UNIVERSAL COMPATIBLE SYSTEM: Our Dremel Quick-Fit interface allows for compatibility with nearly every oscillating tool on the market including Dremel, Bosch, Milwaukee, Makita and Rockwell
- USA BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI
Features:
Specs:
Height | 1.3 Inches |
Length | 8.25 Inches |
Number of items | 1 |
Weight | 0.25 Pounds |
Width | 5.43 Inches |
3. WORKPRO 24-Piece Oscillating Accessory Kit, Mixed Multitool Saw Blades for Sanding, Grinding and Cutting (Not Compatible with Quick-Release Mechanism)
- ✅Compatibility: Not compatible with blade quick release or quick change tools, not compatible with Black Decker BD Matrix, Rockwell Sonic rafter, Dewalt DCS355, Dremel MM40, 45, WORX 20V Max, Worx wx682.9.
- ✅24-Piece Oscillating accessory kit: This high quality kit contains wood/ metal end cut blades, sanding pad, Carbide blade, grout removal Rasp and scraper.
- ✅Various applications: The accessory set can be used while doing home repairing, such as sawing or cutting metal/wood/plastic, sanding hardwood, removing paint, rasping and grinding cement and so on.
- ✅Case for easy carrying: The kit comes with a durable transparent plastic case for well organize, storage and easy carrying.
- ✅Customer satisfaction guaranteed: We provide 100% satisfaction guarantee! If the accessories you bought can't match the tools you already have, Please feel free to Contact us, We will solve your problems immediately.
Features:
Specs:
Height | 10.04 Inches |
Length | 12.99 Inches |
Number of items | 1 |
Weight | 2.23 Pounds |
Width | 1.57 Inches |
4. Integra Tools Platinum Series Blade; One Diamond Rasp Grout Removal 2-1/2-Inch Multi Tool Oscillating Tool Saw Blade fits DeWalt Porter Cable Black&Decker Fein Multimaster Bosch Ridgid Ryobi Skil
- For use with Fein, CRAFTSMAN, Chicago Electric and more, see description for tool compatibility list
- Thick gauge metals and high quality manufacturing techniques insure superior wear tolerance and life
- Universal arbor allows multiple position settings for slip free operation at varying blade angles
- Contractors pack, profession selection of top blades used in job site construction duties
- Pack of accessories, stock your toolbox and get the best per blade price
Features:
Specs:
Color | silver |
Size | Full Size |
5. Dremel MM20-03 120-Volt Multi-Max Tool Kit
- Powerful 2.3 Amp motor easily tackles the toughest applications
- Quick-Fit Accessory Interface for fast and easy accessory changes
- Compact design provides easy access to tight areas
- 10,000 - 21,000 speed range for optimal precision and control combined with smooth operation
- 7-Foot rubber cord for a wide working range
Features:
Specs:
Height | 9.5 Inches |
Length | 17.25 Inches |
Number of items | 1 |
Weight | 3.81 Pounds |
Width | 4.25 Inches |
🎓 Reddit experts on power oscillating tool accessory kits
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power oscillating tool accessory kits are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Well this was my first foray into that world so i'm not so sure I could give great advice on what to buy, but some basics are pretty universal.
For this project I used
-Rotary Tool
-Dremel Multimax (cutting out the basic shape of the scale)
-Sand paper up to 220 grit
-Tung Oil
-Hand Drill
-Table Saw (to cut the piece thinner, DO NOT RECCOMEND super dangerous almost cut my finger off, get a planer instead or buy wood that's already a good thickness)
-Things like screwdrivers obv
​
For my stone stuff i'm gonna use a tile cutting table saw (much less dangerous, spins slower and has water on it) and some other stuff probably, not too sure yet but I'll figure it out I guess.
​
The ultimate takeaway is; basically just get cutting/shaping tools for your rough stuff, drill your holes straight and true, sand it all down with increasing grits, soak it in some oil or coat it in something, and bada bing you have some fancy new scales.
So I figured it out. If you add 2 items that are "Prime Day Deals" and it takes both to get you over $100, then it will apply the double discount. So doing the 36-accessory kit you bought, which was >$100 to start, I could only get it to a single discount. But if you start with something like the $88 11-accessory kit and add another Dremel "Prime Day Deal Item" (look for blue banner) to put you over $100, say the $23 Accessory Kit, then you will get double the discount. I see those 2 things combined (once going to checkout, $112 in just the cart) as $75.40 in checkout. I hope you get this in time to cancel your old order and get the extra deal!
I absolutely love my Dremel. I've used it for so many different projects in my house.
In some circumstances, I don't know what I would have done without it honestly.
[This is the one I bought.] (http://www.amazon.com/Dremel-Multi-Max-Oscillating-Quick-Lock-Accessories/dp/B010T0G9I2/ref=sr_1_1?ie=UTF8&qid=1462119971&sr=8-1-spons&keywords=dremel+multi-max&psc=1)
Here are things from my wishlist (past and present)
Wera Screwdrivers
https://smile.amazon.com/dp/B0085NTQJK/
Oscillating blade set:
https://smile.amazon.com/dp/B0109SELWA/
Clamp multimeter:
https://smile.amazon.com/dp/B00NWGZ4XC/
Kreg Jig Jr.:
https://smile.amazon.com/dp/B000J43A7W/
Angled Long Nose Pliers:
https://smile.amazon.com/dp/B00N3VSS4S/
Groove Lock Pliers:
https://smile.amazon.com/dp/B000FK1R0W/
11 ft wifi endoscope:
https://smile.amazon.com/dp/B01MYTHWK4/
non contact voltage tester:
https://smile.amazon.com/dp/B001UAHZAM/
claw nail puller:
https://smile.amazon.com/dp/B0015YPJMY/
Workmate portable work bench:
https://smile.amazon.com/dp/B000077CQ0/
Cable snake fish tape:
https://smile.amazon.com/dp/B000BP7WBO/
9 Outlet metal power bar:
https://smile.amazon.com/dp/B00F8ZQY5M/
Spade drill bit set:
https://smile.amazon.com/dp/B00099E7WE/
36" bubble level:
https://smile.amazon.com/dp/B000UKMWMO/
I've done a number in my house - at least two dozen.
Go get a diamond coated grout removal blade like this, but I use the True Value hardware store brand (Master Mechanic, I think) for about $10 bucks. Use the grout blade to grind out the box outline, then pop it out with a putty knife or painter's tool. Then switch to a wood saw blade for the wood lath. The less you grind on the wood, the longer the blade will last. I am on my second grout blade - and the first wasn't diamond coated.
I keep a shopvac hose where I am cutting, but that's up to you. Dust is created, but it isn't really thrown about like a circular saw.
When cutting the wood lath - I make the horizontal cuts first., Then when cutting vertically, if you cut all the way through a piece of lath on one side, it will want to vibrate and be tough to cut on the other side. So make a half cut, leaving a bit of material to keep it from vibrating, and go back and do the other.
I got the same deal with the Multi Max.
https://www.amazon.com/Dremel-Multi-Max-Oscillating-Quick-Lock-Accessories/dp/B010T0G9I2/ref=sr_1_1?s=hi&ie=UTF8&qid=1468349840&sr=1-1&keywords=multi+max
Upped my order to $100 and got $20 off. Not sure how you got $40!
I wanted to stain the entire dresser, that's why I sanded the whole thing down fully. Unfortunately, and after doing all that work, I realized the drawers weren't in good enough condition to be stained. The two small drawers had a separate piece of wood with flower engravings on them that I pryed off. The piece underneath of that wasn't solid wood. As I was sanding away the wood glue used to help keep the top piece in place I ended up sanding through the veneer. Also, the rest of the drawers had relatively large holes in them from the old hardware.
I sanded the large surfaces with a belt sander. That was quick and easy. For the contours I used both a dremel contour sander and a dremel multi-max. That part was a pain in the ass.
I used a Minwax wood finish stain. Classic Gray #271