Reddit mentions: The best power oscillating tool accessories
We found 65 Reddit comments discussing the best power oscillating tool accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 21 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Micro MESH Soft Touch Sanding Pads
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 9 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
Features:
Specs:
Height | 2 Inches |
Length | 2 Inches |
Weight | 0.02 Pounds |
Width | 2 Inches |
2. Dremel MM40-05 Multi-Max 3.8-Amp Oscillating Tool Kit with Quick-Lock Accessory Change Interface and 36 Accessories
- High-performance 3.8 Amp motor for the most demanding applications
- Quick-Lock for tool-less and secure accessory changes
- Quick-Boost - maintains constant speed throughout toughest applications and materials
- Quick-hold - magnetic flange holds the accessory in place for easier accessory changes
- Up-front on/off switch – for one-handed use and maintains speed setting
Features:
Specs:
Height | 10.5 Inches |
Length | 17.25 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 4.5 Pounds |
Width | 4.25 Inches |
3. DEWALT Oscillating Tool Blade for Grout Removal, Fast Cutting, Carbide (DWA4220)
- DEWALT oscillating tool blade features UNIVERSAL FITMENT for use on all major brands (no adapter required)
- DEWALT oscillating tool accessory is designed for grout removal
- Carbide edging for grout removal
Features:
Specs:
Color | standart |
Height | 5.75 Inches |
Length | 4.81 Inches |
Number of items | 1 |
Size | One Size |
Weight | 0.2 Pounds |
Width | 0.85 Inches |
4. Festool 498988 Fusion-Tec MultiJetstream Hard Sanding Pad, 150mm Diameter
Hard pad for sanding flat surfaces and narrow edgesMulti-Jetstream design delivers highly effective dust removal, resulting in cleaner air, better finishes and longer pad and abrasive lifeQuickly match the pad to the surface with the efficient Fast Fix tool-less pad changeStick Fix hook and loop des...
Specs:
Height | 6.8898 Inches |
Length | 8.1102 Inches |
Number of items | 1 |
Weight | 0.39903669422 Pounds |
Width | 1.3386 Inches |
5. Mirka Abralon 6" Bowling Ball Sanding Pads (Hook & Loop) Mix & Match, (20 Discs)
Abralon creates a smooth sanding pattern on angled surfaces and edges, while minimizing the risk of pressure marks.Abralon is especially suitable for use in the automotive and marine industries.The pads are durable and work great for wet sanding and, of course, work best with use of a ball spinner.E...
6. Oscillating Multifunction Power Tool
- 21,000 oscillations per minute
- 1.8 Amps, 1/4 hp; 120 Volts, 60 Hz
- single speed
- 7 different positions can be used (for scraper and saw blades)
- includes (1) angled cutter blade, blade attachment hardware & wrench
Features:
Specs:
Weight | 3.5 Pounds |
7. Dremel MM388 Multi-Max Accessory Kit
- WHAT’S INCLUDED: (1) MM610 flexible scraper blade, (2) MM450 wood and drywall blades, and (9) MM70W wood sandpaper sheets
- WIDE-USE APPLICATION: Cutting Blades used for making precise cuts into wood and drywall. Scraper Blade used for removing soft adhesives like caulk, and sandpaper sheets used for sanding wood
- COMPACT CASE: Clear reusable storage case included to keep accessories organized
- UNIVERSAL COMPATIBLE SYSTEM: Our Dremel Quick-Fit interface allows for compatibility with nearly every oscillating tool on the market including Dremel, Bosch, Milwaukee, Makita and Rockwell
- USA BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI
Features:
Specs:
Height | 1.3 Inches |
Length | 8.25 Inches |
Number of items | 1 |
Weight | 0.25 Pounds |
Width | 5.43 Inches |
8. Quick Release Oscillating Saw Blades - 10 Piece Tool Set | Universal Fit Bi-Metal Blade for Cutting Wood Metal | Multitool Blades for Fein Multimaster, Dewalt, Makita, Milwaukee, Rockwell, Dremel
- SUPERIOR VALUE: Why pay $10-$15 per blade? Our saw blades match & exceed name-brand quality at a fraction of the price. 10 pack includes our heavy duty bi-metal blades
- TOUGHER THAN MOST: Made of thicker steel, these premium attachments cut cleanly through metal, wood, plastic, nails & screws. Stiffer, stronger teeth resist wear & tear for longer-lasting use
- PERCISION CUTTING MADE SIMPLE: Use the built-in markers - inches on one side, millimeters on the other - to quickly & accurately gauge the depth of your cuts.
- WILL FIT MOST MULTI TOOLS: Compatible with Fein Multimaster (not Starlock), Dewalt, Rockwell, Porter Cable, Makita, Milwaukee, Bosch (not Starlock), Chicago Electric
- Ryobi, Ridgid, Genesis, Dremel (MM40/MM45 - Message us for C-Clip adapter), Craftsman, Black & Decker,
Features:
Specs:
Weight | 0.22 Pounds |
9. Qbit SQ1000-S-LV
- Specifically Designed to Cut-In Low Voltage 1-gang boxes (See Size Chart)
- Requires 18V,20V or corded oscillating Multi-Tool Will Not Work on 12 Volt Systems
- Made in U.S.A
- Safe to use - won't cut wires or you & simple to train techs
- Stainless steel construction/American engineered & made in the USA
Features:
Specs:
Color | Black |
Height | 1.5 Inches |
Length | 3.62 Inches |
Number of items | 1 |
Weight | 0.02 Pounds |
Width | 2.25 Inches |
10. Dremel MM422B Multi-Max Wood and Metal Flush Cut Blade, 3-Pack
Dremel multi max accessories also fit the Fein multi-master and the Bosch multi-xThe Dremel multi-max can tackle numerous tasksQuick fit accessory change system that provides incredibly fast accessory changesFlush cut blades are used to make precise cutsApplications include flush cutting, installati...
Specs:
Color | Black |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Weight | 0.1 Pounds |
Width | 0 Inches |
11. WORKPRO 24-Piece Oscillating Accessory Kit, Mixed Multitool Saw Blades for Sanding, Grinding and Cutting (Not Compatible with Quick-Release Mechanism)
- ✅Compatibility: Not compatible with blade quick release or quick change tools, not compatible with Black Decker BD Matrix, Rockwell Sonic rafter, Dewalt DCS355, Dremel MM40, 45, WORX 20V Max, Worx wx682.9.
- ✅24-Piece Oscillating accessory kit: This high quality kit contains wood/ metal end cut blades, sanding pad, Carbide blade, grout removal Rasp and scraper.
- ✅Various applications: The accessory set can be used while doing home repairing, such as sawing or cutting metal/wood/plastic, sanding hardwood, removing paint, rasping and grinding cement and so on.
- ✅Case for easy carrying: The kit comes with a durable transparent plastic case for well organize, storage and easy carrying.
- ✅Customer satisfaction guaranteed: We provide 100% satisfaction guarantee! If the accessories you bought can't match the tools you already have, Please feel free to Contact us, We will solve your problems immediately.
Features:
Specs:
Height | 10.04 Inches |
Length | 12.99 Inches |
Number of items | 1 |
Weight | 2.23 Pounds |
Width | 1.57 Inches |
12. Q bit SQ1000-S Qbit Power Oscillating Multi-Tool Blade Saw for Single Gang Outlet Box
- Specifically Designed to Cut-In Plastic 1-gang boxes (See Size Chart)
- Requires 18V,20V or corded oscillating Multi-Tool Will Not Work on 12 Volt Systems
- Safe to use - won't cut wires or you & simple to train techs
- Stainless steel construction/American engineered & made in the USA
Features:
Specs:
Color | Black |
Height | 1.5 inches |
Length | 3.75 inches |
Number of items | 1 |
Size | Single Gang |
Weight | 0.24 Pounds |
Width | 2.37 inches |
13. Box Saw for Double Gang Outlet Box/QBit SQ1000-D Power Oscillating Multi-Tool Saw Blade
Designed to Cut-In Plastic double-gang boxes and Low Voltage Rings (See Size Chart)Requires 18V,20V or corded oscillating Multi-Tool Will Not Work on 12 Volt SystemsUniversal mounting - rotates 360° in 15° incrementsSafe to use - won't cut wires or you & simple to train techsStainless steel constr...
Specs:
Color | Black |
Height | 1.5 Inches |
Length | 3.75 Inches |
Number of items | 1 |
Size | 3-3/4" x 4" |
Weight | 0.4 Pounds |
Width | 2.37 Inches |
14. EZARC Oscillating Multitool Blade Carbide Saw Blades for Hard Material/Metal/Nails/Bolts/Screws, 3-Pack
- Up to 30x longer lifetime with carbide teeth design.
- A 'MUST HAVE' blade for tough cutting jobs on hard material.
- Super endurance for hardened materials, e.g. hardened nails, metal cube, stainless steel and fiber glass.
- Carbide teeth for high performance in metal and other materials.
- Multi-Fit interface fits on most popular oscillating multi tools, two extra adapters in the package cover more tools than any other competitors on the market.
Features:
Specs:
Color | 3PC |
Height | 3.42519 Inches |
Length | 1.37795 Inches |
Size | Full Size |
Weight | 0.0661386786 Pounds |
Width | 0.3937 Inches |
15. CRL Fein 2 in Axe Style Scraper Oscillating Knife Blade
Fits Cut-Out Knives Using a Six or Twelve-Sided Blade Mount, Including Wildcat, Fein and Powr-Cat ToolsWide Range of Sizes and StylesEspecially Designed for the Fein Knives
Specs:
Height | 6 Inches |
Length | 6 Inches |
Number of items | 1 |
Size | 2" (51 mm) |
Width | 6 Inches |
16. Dremel MM600 Multi-Max Rigid Scraper
- Lightweight and compact, easy to use for long periods of time in tight spaces
- Operates at very high speeds for quick results and smooth finishes
- Perfect for work demanding precision and control
- Dremel has the tools, attachments and accessories that help you make your detailed project a success
- Great for scraping harder materials like vinyl flooring, carpeting, and tile adhesives
- Lightweight and compact, easy to use for long periods of time in tight spaces
- "Speed advantage" - operating at very high speeds for quick results and smooth finishes
- Perfect for work demanding precision and control
- Dremel has the tools, attachments and accessories that help you make your detailed project a success
- USA BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
- Lightweight and compact, easy to use for long periods of time in tight spaces
- "Speed advantage" - operating at very high speeds for quick results and smooth finishes
- Perfect for work demanding precision and control
- Dremel has the tools, attachments and accessories that help you make your detailed project a success
Features:
Specs:
Color | Black |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Weight | 0.113 Pounds |
Width | 0 Inches |
17. Dremel MM422 3/4-Inch Multi-Max Wood and Metal Blade
- Lightweight and compact, easy to use for long periods of time in tight spaces
- Operates at very high speeds for quick results and smooth finishes
- Perfect for work demanding precision and control
- Dremel has the tools, attachments and accessories that help you make your detailed project a success
- Ideal for numerous tasks such as sanding, scraping, cutting, and removing tough residue
- Lightweight and compact, easy to use for long periods of time in tight spaces
- "Speed advantage" - operating at very high speeds for quick results and smooth finishes
- Perfect for work demanding precision and control
- Dremel has the tools, attachments and accessories that help you make your detailed project a success
- Ideal for numerous tasks such as sanding, scraping, cutting, and removing tough residue
Features:
Specs:
Color | Black |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Weight | 0.113 Pounds |
Width | 0 Inches |
18. Rockwell 3.0 Amp Sonicrafter Oscillating Multi-Tool, with Variable Speed, Hyperlock Clamping, and Universal Blade Fit System, 31-Piece Kit with Bag – RK5121
- Features 3.2 degrees of oscillation for fast cutting and variable speed for precise control
- Hyperlock tool-free clamping system is easy to use and provides 1 ton of clamping force to prevent slipping during use, no matter the blade angle
- Universal fit system accepts all major brands of blades, sanders, and other accessories to be used on this Sonicrafter
- Great budget tool for more casual users and first time DIYers
- Universal Fit System accepts other brand accessories
- Hyper lock Tool-Less Blade Change - 1TON clamping force prevents blade slippage
- Variable Speed Dial for precision control
- 3.0 Amp Motor
- 21 lbs. max cutting load
Features:
Specs:
Height | 11.25 Inches |
Length | 2.5 Inches |
Number of items | 1 |
Weight | 3.3 Pounds |
Width | 4 Inches |
19. Integra Tools Platinum Series Blade; One Diamond Rasp Grout Removal 2-1/2-Inch Multi Tool Oscillating Tool Saw Blade fits DeWalt Porter Cable Black&Decker Fein Multimaster Bosch Ridgid Ryobi Skil
- For use with Fein, CRAFTSMAN, Chicago Electric and more, see description for tool compatibility list
- Thick gauge metals and high quality manufacturing techniques insure superior wear tolerance and life
- Universal arbor allows multiple position settings for slip free operation at varying blade angles
- Contractors pack, profession selection of top blades used in job site construction duties
- Pack of accessories, stock your toolbox and get the best per blade price
Features:
Specs:
Color | silver |
Size | Full Size |
20. Dremel MM485B Carbide Universal Quick-Fit Flush Cutting Oscillating Tool Blades, Pack of 3 – Multi-Tool Accessory
High Performance carbide teeth provide up to 30X life in hardened materials vs. standard bi-metal oscillating bladesDremel multi max oscillating Universal Quick-Fit accessory system fits Bosch, Makita, Milwaukee and RockwellIdeal materials to cut include soft wood, hard wood, drywall, wood with nail...
Specs:
Color | Black |
Height | 5.42 Inches |
Length | 0.66 Inches |
Number of items | 1 |
Size | 3-Pack |
Weight | 0.05 Pounds |
Width | 3.87 Inches |
🎓 Reddit experts on power oscillating tool accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power oscillating tool accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
> The Lathe:
Sounds like you've got this well under control.
> The Tools:
There are very split camps on tools: replaceable carbide tips vs traditional tools. Personally I think both have a place, but I do feel it's best to start with traditional tools to learn the how and why tools work the way they do. My personal opinion is always to spend the real money on good tools. They don't have to be expensive, but the right tool of the right quality (sharp, of course) will make all the difference in the world. Every try to dig a post hole with a hand trowel? :)
Also don't feel bound by just one brand or type of tool...most of us have lots of tools!
You can go with carbide-tipped tools such as Easy Wood Tools, Simple Woodturning Tools, or other brands. You can make your own for a fraction of the cost to buy.
There are a few of good entry-level HSS sets out there for about $80, such as this frequently recommended set of Benjamin's Best. I also like Hurricane brand tools which I feel are excellent entry-level HSS tools for the money. Either of those would serve you well through the learning curve and a good ways into your turning career.
If you wanted to pick just two higher-end tools, I feel Crown's Pro PM are good for the price. I own several, they're nice, but the handles are a bit short for my knuckle-dragging frame! All you really need for the projects you listed is a skew chisel and a spindle gouge.
Lastly, you could buy some of the popular "buy it for life" tools like Thompson Lathe Tools or D-Way Tools. These are widely considered the upper end of turning tools with each tool running between $55-200 (handles sold separately). Many people who get serious about their hobby end up with these tools because the harder tool steels are more durable.
> The Bench Grinder:
The Rikon 80-805 is the most common good deal for a grinder. Occasionally some other Asia-import will pop up on the scene for a little while, but the Rikon is pretty predictable about going on sale. Also, it comes with two decent wheels to get you started; not all import grinders come with decent wheels.
Eventually you might want to invest in CBN wheels to replace the frangible wheels that come on the grinder, but that's probably down the road for you.
Lots of people use that grinder, I've not heard anything outright bad about it (although some people prefer one with more HP).
> Drill Press?
A cheap drill press will get you there just fine.
The most common alternative is to purchase a 4-jaw chuck, such as the Nova G3 (which requires the appropriate insert), and also a set of pen drilling jaws and a drill chuck for the tailstock. That lets you drill blanks entirely on the lathe (and with better accuracy than a drill press IMO).
The downside is that the 4-jaw chuck, insert, jaws, and drill chuck collectively will cost damn near $200, which is a lot more than a cheap drill press. The upside is that the chuck is exactly what you will need if you decide to get deeper into turning and want to try bowls, boxes, and other things. Many of us already owned or planned to own a chuck, so the only real cost addition was the pen drilling jaws and the drill chuck.
> Pen turning attachments
If you plan on using something else for the finish, make sure you buy what you need.
Oy vey. I drank the Festool Kool-Aid a few years ago and it's a very polarizing brand in some parts (largely due to the price tag; think Apple products). I own a pretty sizable chunk of Festool tools and they all have their pros and cons. I don't swear by them as the end-all be-all tool but as a tradesman and someone that both works in the field and is short on time, they fit my "process" quite nicely. Anyways, without further adieu:
I own the Domino DF 500 Q and love it. That said I think if your dad is drooling for a Domino you should consider the Domino XL DF 700. It's a lot of cash ($1,400) but it'll do pretty much anything your dad needs (and they also make an adapter that lets him use all of the DF 500's bits to make it that much more versatile)
So assuming you do spring for that there's over half your budget right there (gotta love the green kool-aid) but there's literally no other tool like it on the market and I think it's truly worth its weight in gold.
With that taken care of and assuming you're not sick of riding the Festool wave I'd highly consider a dust extractor. They make numerous sizes but I'd offer up the CT36 as a recommendation or even the CT26. I own the CT48 and it's a bit cumbersome and if I had to do it over again I'd opt for a smaller one. If you go for the Festool CT26 you're looking at $650 but I do think the dust extractors are great tools.
Okay, so you've got your Domino and your CT26 and are $2,075 of your slotted $2,500. Now it really gets to personal preference. At this point I think I'd suggest the ETS EC125 with the 150mm Hard Sanding Pad.
I love the EC125 and a reason is because you can put the larger 6" pad onto it and have both the 5" / 6" sander (they both use the same motor). Lots of bang for your buck there and I personally feel the EC125 is the best sander I've ever used (save for some of the pneumatic sanders).
So of your $2500 you're $4 over budget should you opt for all those tools. BUT WAIT - most places will let you "bundle" the Domino w/ a dust extractor and take off 10%. Just go to a place like Hartville Tools and look for "package deals" and you can find them for the packaged price. Here you go: Festool Package
Anyways, hope that helps you out. If you have any questions just let me know about any of their tools. I don't own all their tools but I do own a handful and I'd be happy to give you any knowledge I might have that can help you.
I don't know the ins and outs of pipe restoring, but this website has all the info you'll need:
http://rebornpipes.com/
/u/Flatticus, /u/scriptonic and /u/federalmng are the best restorers I can recall on this sub (sure I'm missing others though). Hopefully one of them will see this.
The stems on quite a few pipes are heavily oxidised. The only way to fix that is by sanding them back as far as I know. There's a solution that is used to help in the process, I know it's on rebornpipes but I can't remember it (can't get the right product in Australia so I didn't make a mental note of it).
Some other good products for the stems are:
A good quality polishing cloth (also available on 4noggins) will be great too, but you might have a bit of trouble polishing them up to a nice shine without using some oil or wax.
Sorry I can't be of more help. Try messaging the runner of rebornpipes or the other users I mentioned. Good luck! And please post updates.
A lot of good suggestions for pens, I think the many different Chinese pens from Wing Sung and Moonman are good options, and you can price them to match what you want. I think the Moonman 80s, both standard and mini sizes, are also good options. Nib sizes are generally 0.5mm, but you can swap in Parker 45 nibs if you want, so could grab an accountant nib and put that in the Moonman for a very fine line.
Bot I think the biggest thing is to take the advice of /u/DontTakeMyNoise and read up on nib tuning. It is a simple thing that will make your fountain pen life much better. I would skip the brown paper bag though, and just get micro-mesh or a micro-mesh nail file. It just works better. For example, https://www.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C would do all the smoothing you would need, and in general, this https://www.amazon.com/Pink-Lizard-Sanding-Polishing-Bending/dp/B01ING00ZM would be all you need to finish polish a nib. Be sure if you look at nail buffers that the one you get has a 12000 grit side.
As a cheap student, you have lots of time to learn this, and it will give you more joy out of the pens you have. I would still recommend some of the others here, the Wing Sung 601, 698, the Moonman 80s are all great pens, and the Wing Sung 3008 or 3009 4 packs are amazing deals for their price. But make the ones you have work well too.
Without seeing more detailed pictures it's hard to know if any of them are valuable, but they are probably all worth tinkering with.
There are specific ways to go about restoring them, so I would do a bit of research before diving in, especially to see if any of them are collectable. If they have stamped maker's marks on the stummel, you can start there.
So, I guess the best place to start is https://pipedia.org/wiki/Main_Page
You need to clean the bowls, both inside and out, without stripping the finish. The stems can be soaked in OxyClean to get the worst of the corrosion off, then sanded back to a nice glossy finish with Micro Mesh sanding pads.
There's definitely some nice looking shapes in there, it's just hard to know anything more about them without more detail.
The PSI micromesh sanding pads work fine, and you can definitely get great results with them, but I've had much better luck with this style. Definitely worth trying when it comes time to replace your current pads.
These two things and some tape are all you need for beautiful headlights. You go through the levels from coarse to fine sanding in alternating directions, vertical with one pad then horizontal with the next. You only need to use 4 or 5 pads, I went through the whole set the first time and found the last couple to be too fine to do much. Clear coat after they're sanded and dry and your good to go for years to come.
2 inch by 2 inch Micro Mesh Soft Touch Sanding Pads
https://www.amazon.com/dp/B000H6EC4C/ref=cm_sw_r_cp_apa_i_TuITCbWP205TA
Meguiar's G17804 Keep Clear Headlight Coating
https://www.amazon.com/dp/B01M4RVVX6/ref=cm_sw_r_cp_apa_i_6wITCbNGG9B7W
You use things called abralon pads. They come in various grit, each one labeled nicely on the back. Heres an example on amazon: https://www.amazon.com/Mirka-Abralon-Bowling-Sanding-Discs/dp/B00CDX82BQ
Any pro shop should have them or you can buy yourself a set. To get to the perfect surface you usually use a spinner in the proshop (again, most proshops should have a ball spinner), but doing it by hand is also effective enough just before competition.
Use some micromesh like this: MicroMesh and then some nice plastic polish after you go through the grits to keep them shiny.
Granted I haven't done this on any dice but I've removed scratches from plexiglass and acrylic this way and its pretty good all said and done.
I had really good luck with light sanding, and then burnishing with the aluminum handle of an x-acto knife.
I've also had SUPER smooth results with the wood-fill using sanding/polishing sponges. (https://smile.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C)
sorry, I now understand my own words 😂 but I meant a different electric tool. It’s perfect for corners like this because the tool is thin and it’s working by oszillation. You can cut tiles and wood easily.
https://www.amazon.com/Chicago-Pneumatics-68303-Oscillating-Multifunction/dp/B0085GEJ7Q/ref=mp_s_a_1_4?ie=UTF8&qid=1536261118&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=multitool+electric+oscillating&dpPl=1&dpID=51dnvFKi7CL&ref=plSrch
Well this was my first foray into that world so i'm not so sure I could give great advice on what to buy, but some basics are pretty universal.
For this project I used
-Rotary Tool
-Dremel Multimax (cutting out the basic shape of the scale)
-Sand paper up to 220 grit
-Tung Oil
-Hand Drill
-Table Saw (to cut the piece thinner, DO NOT RECCOMEND super dangerous almost cut my finger off, get a planer instead or buy wood that's already a good thickness)
-Things like screwdrivers obv
​
For my stone stuff i'm gonna use a tile cutting table saw (much less dangerous, spins slower and has water on it) and some other stuff probably, not too sure yet but I'll figure it out I guess.
​
The ultimate takeaway is; basically just get cutting/shaping tools for your rough stuff, drill your holes straight and true, sand it all down with increasing grits, soak it in some oil or coat it in something, and bada bing you have some fancy new scales.
I noticed that the writing edge has a slight curvature to it. Did you use a squishy surface like a "pad" to do the grind or something with a solid surface like a stone? I've found that pads don't make the writing surface fully flat and you might want to try with a solid grinding surface in case you want to try on a steel nib in the future. I've found my results to be far better on my whetstone compared to my micromesh pads
It's normal. Happens on more expensive watches too. Yes, you can try to polish them out, but you may need something more aggressive than cape cod. (I've used small jeweler's polishing pads like these to great effect https://www.amazon.com/dp/B000H6EC4C/ref=cm_sw_r_cp_apa_i_q8RMDb9WW3A5Q)
I reccomend you be more aware of your watch and try to not bump it if these concern you.
Aside from the increase in tension caused by larger strings the second most important variable is the state of your frets.
If the surface of your frets are chattered/scratched/rough that means when you bend a string you're forcing it over all of those little peaks and valleys in the surface of the fret material which adds resistance and makes bending feel difficult and rough and not nice at all.
Compare that experience to bending over freshly polished frets and you'll never go back.
If you've never had the guitars frets cleaned up you can do this task yourself with some masking tape and a set of sandpaper/pads that go to a really high grit count. The highest grit count pads in those sets feel like leather.
Mask off the fretboard if you're worried about sanding any material there and just start from the low grit up to the high buffing out all the wear and tear on the frets, focusing your attention on long strokes along the length of each individual fret (so the scratches you're introducing follow the path of a bent string...) and keep going until they shine like mirrors.
I like to finish mine with some metal polish and a polishing wheel on a dremel to really bring out the mirror finish (with the fretboard masked off and the body protected, of course).
Keep in mind this is a reductive process (you're removing material...) so if the fret tops are already very worn and flat rather than round you're probably going to want to just do the whole process and do a full fret level+crown+polish which really just means buying a few more tools so you flatten all frets so they're perfectly level with one another, then restore their rounded top (crown), then polish them as above.
Stainless steel frets will also resist the wear and make it so you don't have to do this nearly as often.
I tend to want to stay away from vapor polishing.
I prefer prime and sand. If you don't want paint though: Get what's called "micromesh". They're little sponges that comes in small/large pads, sticks, files, and other shapes and range from like 1000 grit to silky smooth 12,000. You just soak them in water then sand your way up through the grits. You can get a honest to goodness mirror finish on your parts that way.
I got this set and they're great
Looks like oxidization, and the smell is a normal part of that process.
Soak it well with alcohol (cover any logos/painted areas on stem with vaseline), then start to sand off the oxidization using micro-abrasive pads. You can get a set from amazon that works well. For bad oxidation, maybe start with some 600 grit paper and then go to the pads. Once you work up to the highest grit, and the oxidation is all gone, the stem will look and smell new.
They are a great tool for restoring old, oxidized pipes.
But if you don't want to do that, then I'd just return the pipe if possible.
Again, let's divide these into three groups:
Yes it is very possible; I just picked up this set of sanding pads up off Amazon and they work wonders. The smoothest grit actually polishes the plastic. I would very much recommend them!
I agree with the sandpaper but then you can follow it with these pads called micro mesh that go from 1,500-12,000. It should be pretty smooth after that.
I honestly dont make them myself, i have just watched a bunch of videos. But this guy is amazing at resin work. He recomends Micro Mesh and i know it would be perfect for this. Bit pricy though, but it will SHINE!
If you live in the states its going to be a ton easier to get ahold of, but they sell these bigger ones for 20$, which work really well to cut into 4 squares
living in Canada im pretty much stuck getting the smaller ones for 40$ unless I can stand waiting the longer shipping times for the larger ones from the states.
a single bigger set will definitely last you a few sets of keys especially if you cut it into 4. Its also worth noting they last a really long time if you can use them with water, sometimes when using them on wood with an oil finish, i cant use water without ruining the finish so they tend to get kinda clogged up and dont last super long, but with plastic and using water to lubricate they will last you a very long time.
Take the time to sand down the nubs with progressively finer grits. I find these are convenient, http://amzn.com/B000H6EC4C
I also noticed a difference when going from no panel lining to simple pen lining, http://amzn.com/B00GRKPNUE
but similarly, there was a step up when going from pens to wash.
Edit: I also just came across this video; https://youtu.be/hOqkJA4G7HI?t=35m57s
http://amzn.com/B01871I5HS or super thinned enamel paint.
I'd remove the old grout and replace it with a quality grout that matches the material specifications. A multitool has a great grout removal bit and the tools aren't expensive.
https://www.amazon.com/DEWALT-DWA4220-Oscillating-Fastcut-Carbide/dp/B00FRMZVMI/ref=sr_1_1?crid=1NLC0YQMPX7OZ&keywords=grout+removal+multitool&qid=1572191084&sprefix=grout+removal+multi%2Caps%2C180&sr=8-1
You're only going to 600 grit. You can use [Micro mesh] (http://www.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C) sanding pads starting from there.
These pads will give you a very glossy finish by themselves you could use carnuba wax as a protective finish but even though carnuba is very hard (for wax) it won't give you the same durability as a CA finish.
I usually and to 220 or 320 then start layering on the CA. Give that 10-15 minutes to cure then start in with the Micro mesh for a super glossy, durable finish.
Thanks! :-)
The micro mesh can be a bit hard to find...any specialty wood working store should carry it, but it's available online.
http://www.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C
http://www.amazon.com/MICRO-MESH-SANDING-SHEETS-INTRODUCTORY/dp/B000H6HIK2
http://www.leevalley.com/en/wood/page.aspx?p=62127&cat=1,42500
A cheaper method would be to start with a very fine steel wool, and then use a nail buffer, which is essentially a nail file with micro mesh on it...the "shine" side will be the finest. Both of these could likely be found in Walmart, etc.
Never buy the harbor freight version of this. The blade changing alone will drive you insane. You don't need the Fein but a good Rockwell is totally worth the extra money with the quick change blades.
Source; I've owned both.
So I figured it out. If you add 2 items that are "Prime Day Deals" and it takes both to get you over $100, then it will apply the double discount. So doing the 36-accessory kit you bought, which was >$100 to start, I could only get it to a single discount. But if you start with something like the $88 11-accessory kit and add another Dremel "Prime Day Deal Item" (look for blue banner) to put you over $100, say the $23 Accessory Kit, then you will get double the discount. I see those 2 things combined (once going to checkout, $112 in just the cart) as $75.40 in checkout. I hope you get this in time to cancel your old order and get the extra deal!
Would these be considered better for nibs than the ones Amazon sells for $10? If so I'll order these instead.
I absolutely love my Dremel. I've used it for so many different projects in my house.
In some circumstances, I don't know what I would have done without it honestly.
[This is the one I bought.] (http://www.amazon.com/Dremel-Multi-Max-Oscillating-Quick-Lock-Accessories/dp/B010T0G9I2/ref=sr_1_1?ie=UTF8&qid=1462119971&sr=8-1-spons&keywords=dremel+multi-max&psc=1)
The best way to cut a nail flush with the wall with very little damage to the walls and cabinets is with an oscillating multitool.
​
You should give our bi metal oscillating saw blades a try. You can find them on our website or on Amazon.
​
According to Amazon, they are the highest rated oscillating tool blades. They are rated higher than all the top name brand companies on Amazon.
​
​
I think that's up to the individual brand cause I've seen the little holes on the black ones. But if you are doing a lot of these, they make a oscillating saw attachment to easily make the hole.
https://www.amazon.com/Qbit-SQ1000-S-LV-Oscillating-Multi-Tool-Low-Voltage/dp/B074ZP362W/ref=sr_1_3?keywords=low+voltage+hole+saw&qid=1566675700&s=gateway&sr=8-3
get some micro mesh pads, soak it in a mix of water and oxiclean and then go at it with those pads in ascending grit order. Then dab a cleaner in the oil and rub it in. Remember a dab will do you. Keep oiling it every so often to keep it nice.
Do you mean something like this?
Here's the answer
for polishing plastics to optical clarity
So, I also try to avoid progressive sanding. My process is to use a heavy cutter to remove parts from the runner, a fine cutter to take the nub down almost flush. I trim the leftovers flush with an X-acto knife, with a little scraping if needed. To get rid of the scratches, I use a 12000 grit micro mesh sanding pad.
I use the same combination of scraping/micro mesh for removing mould lines.
The results are clean enough that airbrushing isn't needed.
http://www.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C
It's $5 at Gouletpens https://www.gouletpens.com/goulet-micro-mesh/p/GP-10014 but I got some from Amazon https://www.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C/ref=sr_1_2?ie=UTF8&qid=1502855608&sr=8-2&keywords=micromesh
If it's one of the vibrating type, there are blades that work. I have some that came with mine that say metal/wood. I've used it on only a few nails, but it does work.
No idea what's in the UK.
like this
Here are things from my wishlist (past and present)
Wera Screwdrivers
https://smile.amazon.com/dp/B0085NTQJK/
Oscillating blade set:
https://smile.amazon.com/dp/B0109SELWA/
Clamp multimeter:
https://smile.amazon.com/dp/B00NWGZ4XC/
Kreg Jig Jr.:
https://smile.amazon.com/dp/B000J43A7W/
Angled Long Nose Pliers:
https://smile.amazon.com/dp/B00N3VSS4S/
Groove Lock Pliers:
https://smile.amazon.com/dp/B000FK1R0W/
11 ft wifi endoscope:
https://smile.amazon.com/dp/B01MYTHWK4/
non contact voltage tester:
https://smile.amazon.com/dp/B001UAHZAM/
claw nail puller:
https://smile.amazon.com/dp/B0015YPJMY/
Workmate portable work bench:
https://smile.amazon.com/dp/B000077CQ0/
Cable snake fish tape:
https://smile.amazon.com/dp/B000BP7WBO/
9 Outlet metal power bar:
https://smile.amazon.com/dp/B00F8ZQY5M/
Spade drill bit set:
https://smile.amazon.com/dp/B00099E7WE/
36" bubble level:
https://smile.amazon.com/dp/B000UKMWMO/
kind of like this? https://www.amazon.com/SQ1000-S-Oscillating-Multi-Tool-Single-Outlet/dp/B01GKKE2W0
https://www.amazon.com/dp/B01GKKE2W0/ref=cm_sw_r_cp_awdb_t1_BiUgDbZ2QED14 others are available. I've heard of a two gang one too.
Used Micromesh https://www.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C/ref=sr_1_1?ie=UTF8&qid=1483716043&sr=8-1&keywords=micromesh
Here is the mobile version of your link
Chinesium blades.
Here is the desktop version of your link
The also make undercut grinding tools for a dremel, so you can get under there before grinding flush.
http://www.amazon.com/Dremel-MM422-4-Inch-Multi-Max-Metal/dp/B001GNC8SW
In case anyone wants to buy it here's the link
https://www.amazon.com/dp/B00QL51DRW/ref=cm_sw_r_cp_apa_PzXWzbVDTHAJ0
Use Acetone (like goo off) with:
If you have a multi-tool:
https://www.amazon.com/Dremel-MM600-Multi-Max-Rigid-Scraper/dp/B001IZT520/ref=sr_1_3?ie=UTF8&qid=1491324466&sr=8-3&keywords=multi+tool+scraper
If you have a Reciprocating Saw:
https://www.amazon.com/Scraper-Scraping-Attachment-Reciprocating-Multi-Pack/dp/B002GP7GBI/ref=sr_1_1?ie=UTF8&qid=1491324593&sr=8-1&keywords=reciprocating+scraper
If you don't have either, you can pick them up from a harbor freight for fairly cheap.
Oh but they do!
https://www.amazon.com/Double-Outlet-SQ1000-D-Oscillating-Multi-Tool/dp/B071J8TJVK/ref=mp_s_a_1_4?keywords=oscillating+tool+box+cutter&qid=1569617738&s=gateway&sr=8-4
If you have an oscillating tool, the proper blade will make short work of removing the old grout:
https://www.amazon.com/DEWALT-DWA4220-Oscillating-Fastcut-Carbide/dp/B00FRMZVMI
I've done a number in my house - at least two dozen.
Go get a diamond coated grout removal blade like this, but I use the True Value hardware store brand (Master Mechanic, I think) for about $10 bucks. Use the grout blade to grind out the box outline, then pop it out with a putty knife or painter's tool. Then switch to a wood saw blade for the wood lath. The less you grind on the wood, the longer the blade will last. I am on my second grout blade - and the first wasn't diamond coated.
I keep a shopvac hose where I am cutting, but that's up to you. Dust is created, but it isn't really thrown about like a circular saw.
When cutting the wood lath - I make the horizontal cuts first., Then when cutting vertically, if you cut all the way through a piece of lath on one side, it will want to vibrate and be tough to cut on the other side. So make a half cut, leaving a bit of material to keep it from vibrating, and go back and do the other.
very easily it could damage the tile. You could get one of these or if you want you could us a multi tool with one of these
I got the same deal with the Multi Max.
https://www.amazon.com/Dremel-Multi-Max-Oscillating-Quick-Lock-Accessories/dp/B010T0G9I2/ref=sr_1_1?s=hi&ie=UTF8&qid=1468349840&sr=1-1&keywords=multi+max
Upped my order to $100 and got $20 off. Not sure how you got $40!
I'm not a fan of buffing the peen job. Too easy to heat the pins and collars. Worse case is they get hot enough they melt into scales.
Even if get a little warm, they pull into the scales, loosening up the pivot pin. Now all the work to make a tight pivot is lost.
Also the washers/collars are thin metal. Often a collar loses a little metal. That leaves a collar that is not a true circle.
What I do like is MicroMesh. If not familiar, it is sort of like sand paper from 1300 to 12000. Just kiss the media to the heads for about 30 seconds on each head. Leaves a very crisp looking pin, with no distortion. If scales are scratched, do the complete scales.
If any delicate adornments on the scales, you might not want to do the scales.
Edit-they make a kit that has liquid polish to be used at 12000 and a soft polishing cloth. On the phone, so can't find the complete kit right now, but here are the pads alone
http://www.amazon.com/gp/aw/d/B000H6EC4C
order these you won’t regret it
Afraid I didn't take any, but these are the sanding pads I used.
https://www.amazon.com/MICRO-MESH-SOFT-TOUCH-SANDING/dp/B000H6EC4C
Other than that, it's nothing fancy, just some light pressure and fast movement.