Reddit mentions: The best power tile & masonry saws
We found 20 Reddit comments discussing the best power tile & masonry saws. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. SKIL 3540-02 7-Inch Wet Tile Saw
- Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
- Adjustable rip fence with miter gauge for accurate straight and miter cuts
- Blade cooling water reservoir to keep blade cool while minimizing dust and debris
- Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
- Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch
Features:
Specs:
Color | Red |
Height | 7.52 Inches |
Length | 15.16 Inches |
Number of items | 1 |
Size | 1-(Pack) |
Weight | 15.81 Pounds |
Width | 17.32 Inches |
2. DEWALT DWC860W 4-3/8-Inch Wet/Dry Masonry Saw
- Power 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials
- Premium 4-3/8-inch diamond blade allows the user to cut ceramics and stone materials up to 3-centimeters deep-wet or dry
- 13-Foot water line feeds water to the blade decreasing dust and increasing blade performance and life
- Bevels to 45 Degrees for quick angled cuts
- Lock-on button reduces fatigue during production cuts
Features:
Specs:
Color | Yellow |
Height | 9.84 Inches |
Length | 10.31 Inches |
Number of items | 1 |
Size | One Size |
Weight | 9.95 Pounds |
Width | 6.93 Inches |
3. SKIL 3600-02 120-Volt Flooring Saw
- Portable saw makes accurate cross, miter, and rip cuts
- Dual sliding rails provide accuracy and effortless operation during cross and miter cuts
- Miter detents at 0, 22.5, and 45 degrees
- Innovative locking system secures saw on rails for rip cuts
- 3600 saw, 75540 4-3/8-inch 40-tooth blade, self-aligning rip/miter fence, blade wrench, clamp, push stick
Features:
Specs:
Color | Metal |
Height | 15 Inches |
Length | 29 Inches |
Size | 12 |
Weight | 31.92 Pounds |
Width | 21 Inches |
4. SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System
- Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
- Sliding side extension provides support for tiles up to 18 x 18-inch
- Aluminum table top is a durable, rust-resistant surface
- Adjustable rip fence with miter gauge for accurate straight and miter cuts
- Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types
Features:
Specs:
Color | Multi |
Height | 8.5 Inches |
Length | 22 Inches |
Number of items | 1 |
Size | One Size |
Weight | 22.05 Pounds |
Width | 18 Inches |
5. 4-3/8"" Masonry Saw
Powerful 12 AMP motor for various cutting applicationsCuts up to 1-3/8""Compact design at only 8-5/8"" long and weighs only 6.5 lbs. for less operator fatigueHigh power-to-weight ratio with 13,000 RPMEasy to adjust depth gauge for precision cuttingLock-off button helps prevent accidental start-upsFl...
Specs:
Color | Factory |
Height | 8.5 Inches |
Length | 9.17 Inches |
Number of items | 1 |
Size | 4 3/8"" |
Weight | 5.9 Pounds |
Width | 9.17 Inches |
6. Plasplugs DWW406US Power Master Wet Saw
Wet saw for use cutting porcelain, tile, granite, ceramics, and marblePowerful 1/2 -horsepower High torque geared motorUnique water recirculation system allows more time to cut tiles and less time refilling the waterIncludes 4-1/4-inch diamond impregnated blade, straight cutting guide with dual lock...
Specs:
Weight | 11.5 Pounds |
7. SKIL 3601-02 Flooring Saw with 36T Contractor Blade
- Cuts solid, engineered and laminate flooring with ease
- Makes cross, miter and rip cuts
- Lightweight design for transport and use at any project location
- Miter detents at 0, 22.5 and 45 degrees
- Die-cast aluminum miter and rip fence
Features:
Specs:
Color | Red and black |
Height | 13 Inches |
Length | 28.9 Inches |
Number of items | 1 |
Size | 1 |
Weight | 30 Pounds |
Width | 20.1 Inches |
8. Leegol Electric 7-Inch Wet Tile Saw - Portable Wet Cutting Porcelain Tile Cutter Table Saw with Water System
- Bevel cuts tile from 0 to 45 degrees - flexibility for different cut types.
- Adjustable rip fence with miter gauge - for accurate straight and miter cuts.
- Blade cooling water reservoir - keeps blade cool and minimizes dust and debris.
- Powerful induction motor - supply generates up to 3,550 RPM for the most demanding jobs.
- 100% Satisfaction Guaranteed: With a manufacturer warranty you can be sure you will get a quality wet tile saw.If you get a poor saw,contact with us,we will supply a new one.
Features:
Specs:
Height | 6.75 Inches |
Length | 18 Inches |
Size | 7-Inch |
Weight | 26.8 Pounds |
Width | 15.75 Inches |
9. MK Diamond 157222 MK-170 1/3-Horsepower 7-Inch Bench Wet Tile Saw
7-inch bench wet tile saw1/3-horsepower engine for high torque (5500 rpm) and powerHigh-impact thermoplastic water reservoir will not rust or peelIncludes saw, 7-inch diamond blade, submersible water pump, adjustable rip guide15 pounds; 1-year warranty
Specs:
Height | 13 Inches |
Length | 14 Inches |
Number of items | 1 |
Weight | 15 Pounds |
Width | 15 Inches |
10. Nova 71118 Comet II DR - Midi Lathe Flexible Woodworking System, 12”, Powerful Electronic 3/4 HP variable speed
- Speed Range: 250 - 4,000 RPM with its powerful electronic variable speed motor.
- Digital Readout: Quickly dial-in the correct speed for the job, material and conditions. you’re not limited to potentially dangerous fixed-speed steps.
- Forward and reverse switch: Forward and Reverse Switch offers additional flexibility with the Nova Lathe and allows you to achieve a superior finish
- 12” Swing over bed and 16.5” between centers. Expandable to 42“ with optional bed extension accessory (Additional purchase).
- 3” Faceplate, 6” Tool Rest, Spur-Drive Center, Live Tailstock Center, Knockout Bar, Lathe Handwheel Unit. Manual with parts breakdown and fasteners.
Features:
Specs:
Height | 32.9 Inches |
Length | 8.9 Inches |
Number of items | 1 |
Weight | 82 Pounds |
Width | 17.8 Inches |
11. Jepson 8210SCK Tile Cutter with Wet Tile Blade and Water Kit
Cut tile, marble, granite, brick or remove groutUse either diamond blade or cut off wheelHigh power output 12 amp motor, hardened steel gears ensure performanceBilateral coolant discharge adds efficiencyIncludes wet tile blade and water kit
🎓 Reddit experts on power tile & masonry saws
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where power tile & masonry saws are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Easy project, good for a first time tiler. If you go with a porcelain or ceramic tile, you just need a tile cutter which scores and snaps rather than cuts. Those are cheap and easy to use. Natural stone requires the use of a wet saw. We debated on renting vs borrowing vs buying a wet saw. Our project was large (master bath walls and floors) so renting would have gotten expensive quickly (took over a month to complete). We ended up getting this guy and it worked very well.
Backsplash is very simple. Watch some videos and get started. Good luck!
Don't get masonry anywhere near woodworking tools.
You'd use a wet saw for tile and masonry.
The best answer would be to spend ~30 minutes and several bricks and learn to use a masonry chisel. It's not that hard. That's what bricklayers use, and for good reason. It isn't rocket science, it just takes a little practice.
If you really, truly do need high-accuracy cuts (eg., you're doing brick inlay in a table top, or something,) then rent a wet saw from Home Depot.
I don't have a lot of money to throw at this hobby, and going to the local rock club to use their tools isn't appealing to me personally, so I bought this:
https://smile.amazon.com/gp/product/B003HIWR08/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
And used this blade, which I very much recommend.
https://smile.amazon.com/gp/product/B00009YUJT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It's half the thickness of the stock blade, so you waste less material, and it's held up quite well. I don't do a huge amount of cutting, but I've sawn through dozens of fist sized rocks and lots of roughing out cabs, and it's showing no signs of slowing down yet.
One nice thing I've found is that since the diamonds cover the last 1/2" or so of blade, you can use the side of it to do a little seat-of-your-pants cabochon shaping.
All in all, the only real limitation is the size. You're limited to fist sized rocks. Although you can cut a radius as deep as possible, then tap to break it and hope for the best.
Previous shower area was around 30 years old. Fake marble walls, small wall niche, leaks in the corners and ugly plumbing.
Over the course of 3 weeks (had to go housesit elsewhere - we only have one bathroom), we gutted the old furnishings down to the studs, built a new niche, added backerboard, waterproofing membrane, new tiles, new fixtures, and had the tub re-furbished (by a pro).
If anyone's curious, here's some products we used.
Tile:
http://crossvilleinc.com/products/modern-mythology/
Backerboard:
James Hardie Backer Board
Tile saw:
http://www.amazon.com/SKIL-3540-02-4-2-Amp-7-Inch-Tile/dp/B003HIWR08
Waterproofing membrane:
http://www.homedepot.com/p/Custom-Building-Products-RedGard-1-gal-Waterproofing-and-Crack-Prevention-Membrane-LQWAF1/100169081
Fixtures:
http://www.amazon.com/gp/product/B004NXT3TE/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1
http://www.amazon.com/Re-modeling-Pfister-Shower-Porcelain-Handles/dp/B001EBWG74
We learned as we went with this (also made many mistakes that thankfully aren't too bad on completion). Upon gutting the shower - found a bit of mold growing on the old green board backing material. Was actually better than expected. We also didn't want to swap out the old 2 knob faucet for something newer (required more plumbing work than we wanted) so we ordered a 3 knob version and just used two of the knobs/stems. Works great.
And a ton of knowledge from this incredibly useful YouTube channel.
https://www.youtube.com/user/TileMasterGa
If anyone has any specific questions, please ask.
Agreeing with the "wet saw" advice from others... but I wanted to chime in that I purchased one of those low cost plastic tub style wet saws, and I have put hundreds of tiles through it - for the money, it does a fabulous job. Mine is like this one.
Just picked up this through Amazon for $85 and am pretty happy with it. https://www.amazon.com/gp/product/B003HIWR08/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I laid those tiles about a year ago and I didn't wanna spend 600-700 on a saw so I cut them with small dry cut masonry 4" Makita that I already had and it went pretty well. Similar to this one
http://www.amazon.com/Makita-4100NH-Amp-8-Inch-Masonry/dp/B000RQ68SU/ref=sr_1_6?ie=UTF8&qid=1459358086&sr=8-6&keywords=makita+dry+cut+saw
I got mine used off of ebay for about $70.
I put down entry way about 100 sq.ft with these tiles and it went fine, just need to secure the tiles to the workbench when cutting, I used a wood plank and clamps.
so, we wouldn't be able to crosscut with the table saw really? we found the second saw (http://www.amazon.com/Skil-3600-02-120-Volt-Flooring-Saw/dp/B0037KM8TQ/ref=sr_1_4?ie=UTF8&qid=1321827868&sr=8-4), it does ripping and crosscutting, and is about 1/4-1/3 the price of a tablesaw. It can only handle a material thickness of 3/4" but, I honestly don't see us doing a whole bunch of woodwork in the future other than installing the floors.
We bought a flooring saw for around 200$. 10/10 would recommend: it made for really straight cuts. The tile cutters - the ones that look like paper cutters -.dont actually work for the thicker vinyl tiles. Invest in a power tool, and sell it on Kijiji once you're done with it! (We kept ours as we are going to do other rooms in the future).
SKIL 3601-02 Flooring Saw with 36T Contractor Blade https://www.amazon.ca/dp/B00J21SL4A/ref=cm_sw_r_cp_apa_i_3BMHDb4HBWM5S
It is much better quality. I don't know about the $.49 stuff. I used to use the HD stuff, and when I found this I decided to get the $1.50 stuff (they have 10% off sales on occasion). Instead of 7mil, it was 13 mil and came in "random" (about 4 different) lengths with beveled edges. Just as easy to put down and I didn't have as many "click edge" problems. It looks as close to a real hard wood floor as I have seen. Here is a picture of a room I did http://i387.photobucket.com/albums/oo316/kvrdave/lam7-1.jpg The beveled edges seriously look good.
Also, if you don't have one of these, get one. http://www.amazon.com/SKIL-3600-02-120-Volt-Flooring-Saw/dp/B0037KM8TQ/ref=sr_1_1?ie=UTF8&qid=1373381931&sr=8-1&keywords=skil+laminate+saw
I have used the following tools for all my tiling needs so far each has their own strengths and weaknesses:
https://www.amazon.com/Kobalt-24-in-Snap-Cutter/dp/B0764KK8RQ
https://www.amazon.com/DEWALT-DWE402-2-Inch-11-Amp-Grinder/dp/B00RVZ7DNO
https://www.amazon.com/DEWALT-DWC860W-4-3-8-Inch-Masonry/dp/B003BVW5NU
One of these: https://www.amazon.com/dp/B07C21VL9J
You could try scoring and breaking too, but I've never seen someone do that well
From what I've seen, most people who start up a studio by themselves build everything they can. This include the furnace and annealer along with the other stuff you mentioned you would build. This is because its twice as expensive to buy it from a company like Wet Dog Glass compared to just building your own. The tools would probably cost 2-3k which is nothing compared to everything else you would need. I just googled the wet tile saw ~$200
Furnace glassblowing is probably the most expensive studio craft there is out there...
/u/BlueRockStar might have some more numbers in terms of gas bills and things.
A couple of deals on quality smaller lathes on amazon in case you don't have a Woodcraft around for the Rikon deal:
Jet JWL-1015 for $277Nova Comet II $400SOLD OUT
Is this the saw you have? In what way is it insufficient? You can just remove the fence and mark the tile and guide it by hand. You might screw up a couple cuts, but it's going to be far cheaper than getting another saw.
Buy a cheap tile saw.
http://www.amazon.com/Skil-3540-02-4-2-Amp-7-Inch-Tile/dp/B003HIWR08/ref=sr_1_1?ie=UTF8&qid=1313898662&sr=8-1
http://www.skiltools.com/flooringsawtool/
http://www.amazon.com/Skil-3600-02-120-Volt-Flooring-Saw/dp/B0037KM8TQ
http://www.amazon.com/Jepson-8210SCK-Cutter-Blade-Water/dp/B000022532/ref=cm_cr_arp_d_product_top?ie=UTF8
Tile saw with a glass cutting blade.
http://www.lowes.com/pd_416741-10742-30469_0__?productId=3805957
http://www.amazon.com/SKIL-3540-02-4-2-Amp-7-Inch-Tile/dp/B003HIWR08/ref=sr_1_1?ie=UTF8&qid=1411864336&sr=8-1&keywords=wet+tile+saw