Reddit mentions: The best automotive cv & transmission parts
We found 15 Reddit comments discussing the best automotive cv & transmission parts. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 13 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. EMPI CV Boot Clamp
- Fit Type: Vehicle Specific
- Package Weight: 0.984 kilograms
- Made in China
- Package Dimensions : 10.75 L x 3.38 H x 6.0 W (inches)
Features:
2. OES Genuine CV Boot Clamp
Meets or Exceeds original specificationsComes with full manufacturer warrantyMost orders delivered in 2-3 daysMost orders leave warehouse same dayNew
3. Axle ABS Tone Ring (Rubber Relutor Ring) With Magnetic Encoding 213132ABS Compatible with Chrylser 300 Charger Magnum Challenger
- Axle ABS Tone Ring, Magnetic Encoding, Also called Rubber Relutor Ring
- Replace Tone ring to Kill ABS, TC, BAS, ESP light
- Excellent tolerance to resist high and low temperatures
- 12 months or 12,000 miles product warranty
- Meets or exceeds OEM Spec
Features:
Specs:
Number of items | 1 |
4. GSP NCV11151 CV Axle Shaft Assembly - Left Front (Driver Side)
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 22-3/4 inch compressed length; 27 spline outer joint; 27 spline inner joint
- For select Ford vehicles (verify fitment details with fit checker above): 2003-05 Explorer Sport Trac; 2003-12 Ranger
Features:
Specs:
Height | 5 Inches |
Length | 27 Inches |
Number of items | 1 |
Release date | February 2016 |
Width | 5 Inches |
5. Dorman HELP! 614-632 C Series Universal Quick Boot Kit
- Upgraded Materials
- Package Dimensions: 12.3 L x 25.4 H x 18 W (centimeters)
- Package Weight: 0.303 kilograms
- Country of Origin : United States
Features:
Specs:
Height | 1.1 Inches |
Length | 2.1 Inches |
Number of items | 1 |
Weight | 0.64 Pounds |
Width | 1 Inches |
6. GSP NCV27522 CV Axle Shaft Assembly - Left Front (Driver Side)
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Left Front (Driver Side); 22-11/16 inch compressed length; 30 spline outer joint; 27 spline inner joint
- For select BMW vehicles (verify fitment details with fit checker above): 2001-05 325xi, 2001-05 330xi
Features:
Specs:
Height | 5 Inches |
Length | 28 Inches |
Number of items | 1 |
Release date | February 2016 |
Weight | 17.34 Pounds |
Width | 5 Inches |
7. Dorman HELP! 03637 CV Joint Clamp Kit
Mfr# 03637 - S.B.KT CLM C.V.BOOT CHRY
Specs:
Height | 0.37 Inches |
Length | 8.25 Inches |
Number of items | 1 |
Weight | 0.04 Pounds |
Width | 5.5 Inches |
8. GSP NCV69578 CV Axle Shaft Assembly - Right Front (Passenger Side)
- GSP CV Axles are engineered to provide OE fit, form, and function - premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
- Right Front (Passenger Side); 37-13/16 inch compressed length; 26 spline outer joint; 24 spline inner joint; 48 tooth ABS ring
- For select vehicles (verify fitment details with fit checker above): TOYOTA: 2002-09 Camry, 2001-07 Highlander, 2004-08 Solara
Features:
Specs:
Height | 5 Inches |
Length | 41 Inches |
Number of items | 1 |
Release date | February 2016 |
Weight | 21.72 Pounds |
Width | 5 Inches |
9. DTA HO23552356 front Left Right Pair - 2 New Premium CV Axles (Drive Axle Assembly) Compatible with 2006-2014 Honda Ridgeline
Compatible with 2006-2014 Honda RidgelineGuarantee proper fit and easy installationQS 9000 and ISO 9002 certifiedExcellent tolerance to resist high and low temperatures12 months or 12,000 miles product warranty
10. Moog 3416 Boot Clamp
- Greaseable u-joint allows for new grease to flush out contamination and moisture reducing corrosion and wear.
- Patented thrust washer technology absorbs axial loads preventing metal to metal contact and ensures even grease distribution to the wear surfaces. Thrust washers are manufactured to tight tolerances to allow for easier driveshaft balancing.
- Includes an exclusive anti-drainback design to control lubrication flow and prevent dry start up.
- Needle bearings and snap rings are sourced from an original equipment supplier. Needle bearings provide size consistency and proper hardness for even load distribution. Snap rings are held to strict tolerances to ensure proper cup position and retention.
- Nitrile rubber grease seals use a compressed double lip design to ensure more effective protection from contaminants and are purgable for longer life. Seals utilize stringent multifaceted SAE performance standards to ensure consistently high quality.
Features:
Specs:
Height | 5 Inches |
Length | 8 Inches |
Number of items | 10 |
Release date | August 2012 |
Weight | 1.28 Pounds |
Width | 5 Inches |
11. VELOCITY STACKS 3.5" NECK ADAPTER Composite Nylon - Black, Universal
BLOX Racing offers form and function.
Specs:
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Release date | August 2013 |
Width | 0 Inches |
12. Empi 80-5521 CV Joint Half-Shaft Assembly
- 100% Brand New Axles
- All New CV Boots
- Precision Ground Bearing Landings and Sealing Surfaces
- 100% Solid Precision Machine Axle Bars
- New Tripods and much much more .....
Features:
Specs:
Height | 5 Inches |
Length | 5 Inches |
Weight | 20 Pounds |
Width | 30 Inches |
🎓 Reddit experts on automotive cv & transmission parts
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where automotive cv & transmission parts are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
More like this https://www.amazon.com/gp/aw/d/B001HLXFHG/ref=mh_s9_acsd_topr_b13yaT_c_x_1_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=mobile-hybrid-3&pf_rd_r=1FTBCVZ1A43HG4JPWX5D&pf_rd_r=1FTBCVZ1A43HG4JPWX5D&pf_rd_t=30901&pf_rd_p=e4caac57-a527-5dfc-8966-2cec2551af43&pf_rd_p=e4caac57-a527-5dfc-8966-2cec2551af43&pf_rd_i=15724221
Except the little tabs won't pry up and the metal is to strong for dikes or shears
Some CV boot clamps are VERY similar to the zip tie product you mentioned:
https://www.youtube.com/watch?v=mBsqyH6xhw0
Most are like this and need special pliers to crimp it:
https://www.amazon.com/OES-Genuine-CV-Boot-Clamp/dp/B007ZCAYDO/ref=sr_1_2?ie=UTF8&qid=1540332495&sr=8-2&keywords=Replacement+Constant+Velocity+Boot+Clamps
I couldn't say, but some do. The tone rings for some Chryslers (300, Magnum) are entirely made of rubber with no metal at all (there is some kind of powder or something embedded, turning it into something like a credit card mag stripe), while some Toyotas (Tundra, Tacoma, 4Runner..) have a normal looking metal one with some sort of rubber insert; example part: https://www.amazon.com/Magnetic-Encoding-213132ABS-Chrylser-Challenger/dp/B078X1SLFF
It's the correct part number and matches multiple years as the only part available for that vehicle. I can't tell if that end looks right though. Look at the pics of this one on amazon . they have a good pic of the ends and you can blow it up. Does it match the part you have?
These are what you're talking about, the reviews pretty much sum up my experiences with them. I much prefer replacing the whole shaft and boot with a reman.
If you decide to go with a split boot you're going to need the banding tool to tighten the bands, don't attempt to tighten the boots without one, it wont work very well.
They are paying less than this for the first part:
https://www.amazon.com/Moog-RK620025-Control-Joint-Assembly/dp/B00CCK99YO
...and less than this for the second:
https://www.amazon.com/GSP-NCV27522-Axle-Shaft-Assembly/dp/B006EKI87C
FYI
Does it look like this: https://www.amazon.com/Empi-W0133-1643984-EMP-EMPI-Boot-Clamp/dp/B001HLXFHG
I am not ashamed that I have one of those Dorman quick boots on my car. Getting these CV bands instead of the ones provided was so much better.
I’m guessing that’s your passenger side and here’s a listing off of Amazon for an example. Labor is going to cost a lot more than the part as usual, it could be as much as $200 depending if they find something else wrong. If you budgeted $400 you should be OK, assuming you aren’t going to the dealer.
GSP NCV69578 CV Axle Shaft Assembly - Right Front (Passenger Side) https://www.amazon.com/dp/B001B09YQY/ref=cm_sw_r_cp_api_bNM0Ab79RR66R
Basically this, with ducting going to the intake heat shield.
http://www.amazon.com/Blox-Racing-BXIM-00312-BK-Composite-Velocity/dp/B007ZDQZ40
You are mostly paying for labor so at 80k miles I think you should just have them replace the entire CV axle assemblies while they are at it. You can get these http://www.amazon.com/HO23552356-front-Left-Right-Pair/dp/B00K5AZIFC/ref=sr_1_2?s=automotive&ie=UTF8&qid=1408534076&vehicle=2006-59-2793------------003-0&sr=1-2&ymm=2006%3Ahonda%3Aridgeline produced by a qs9000 certified facility for about $175.00 shipped.
The EMPI is cheaper than the ToughOne! I might get that....
Or O'Reilly's. No more Advance axles though!
that scared the crap out of me $500 for a 84 mercedes axle
https://www.amazon.com/Heri-76080-New-CV-Axle/dp/B00TO0EQJ8
$75
or $63.99 from Pepboys... i would probably go to pepboys if you have one close rather than off amazon..
​
and double check the fit
gees $500 heh