Reddit mentions: The best automotive replacement ram air kit

You are correct. $139 on Amazon. I have a hunch this same kit probably goes by different brand names around eBay and Amazon, like these things tend to do.

The quality is good. I was impressed by the packaging, instructions, and powder coating. I work in the coatings industry. I didn't expect the finish to be good at all and I was prepared to re-paint it on arrival. I was happy I didn't need to.

The main tube is 3". It has a 3.5" elbow at the end where the sensor mounts and the cone filter attaches. I don't know how this compares to other intakes where actual dyno research was done (like Mishimoto), so I don't have a clue if 3" is actually bad or not. My guess is that the intake doesn't need to be bigger than the compressor inlet diameter and being too big might even decrease velocity, but I'm not an engineer. LOL I didn't choose this for scientific reasons. I chose it because it was affordable and I'm glad I did.

I had a crack in the factory intake at the mounting bracket that holds the 90 degree section where the plumbing goes into the filter box. I didn't dislike the factory intake, it actually looked like it was adequate But that cracked piece was enough motivation to make me shop for an intake. The more I disassembled, the more problems I found. Cracked rubber pieces, mostly.

The pieces fit well. It included a simple filter shield box with heat protective paneling. The cone filter looks like the cheapest part in the kit, and I intend to replace it right away. It just doesn't seem like it was manufactured well. Everything else included in the kit seemed well made.

And I was very happy with the sound when I was done. Other than this, the engine and exhaust are stock. With this intake it's really not louder, but I can actually hear my turbo and bypass valve for the first time. I use my car for work and I need to make phone calls on the highway. With this intake, it's basically as quiet in the car as it was before. You only hear a little whoosh when you get into boost.

Performance-wise, I wasn't expecting to notice a difference, and I don't. But at least I didn't notice a decrease in performance. And I am happy to report that my mpg has neither suffered nor improved in the two days I've had it installed.

All in all, I recommend it! I'll make an imgur album tomorrow.

Hi. I have a few things I'm trying to get rid of. If you're interested, I'd prefer to keep our communication to reddit. I haven't posted here before so forgive me if I'm slow. I haven't posted any of these items on CL or anywhere else (yet). Cash only please. I'm going to try to be straight up with you, so if you're interested in anything here, please be straight up with me. I'm open to negotiation, but I hope I am putting up reasonable prices. So don't lowball me like crazy.

• [Korean Blanket] (https://imgur.com/RoomPTM) My mother gave this to us but we never use it. I think it measures 80 in. x 95 in. Similar blankets on [Amazon] (https://www.amazon.com/Solaron-King-Peacock-Korean-Blanket/dp/B000JD56GQ) look to be going for around 80 bucks. I'm thinking 40 bucks and it's yours.
  
  
• [Zojirushi Bread Maker] (https://imgur.com/Cq0avza) Sorry for the bad photo. This is a highly regarded bread maker. Perfect size for small kitchens. Look on [Amazon] (https://www.amazon.com/Zojirushi-BB-HAC10-1-Pound-Loaf-Programmable-Breadmaker/dp/B000G32H84/ref=sr_1_1?ie=UTF8&qid=1525193380&sr=8-1&keywords=bbhac10) to peep the features and reviews. Full disclosure, the price on this is fairly high new. But we used it for a few months and then we stopped out of laziness haha. So it is used AND the hinge on this is kinda broken on one side. So be gentle when opening and closing it. With all that in mind, how about 100 bucks?
  
  
• [Fisher Price Rock 'n Play Sleeper] (https://imgur.com/9z9WwpC) We only used this once. It looks like [Target] (https://www.target.com/p/fisher-price-newborn-rock-n-play-sleeper/-/A-15263603) has a similar one on sale right now for almost 50. So 40 bucks obo.
  
  
• [Phil & Ted's Poppy High Chair] (https://imgur.com/wOBAxzJ) Sorry for the bad image. We used this a few time and liked it. It's well rated on [Amazon] (https://www.amazon.com/phil-teds-Poppy-Highchair-Lime/dp/B00BZO1PE0/ref=sr_1_3_a_it?ie=UTF8&qid=1525192856&sr=8-3&keywords=poppy%2Bhigh%2Bchair&th=1) and they sell it for 110. Full disclosure though, we stopped using it after reading some reviews that some people were finding fiberglass splinters from the tray. If that doesn't deter you, how about 80 bucks?
  
  
• [No-name White Bag] (https://imgur.com/1kz1qAe) Matches for scale haha. Never used. It's probably not worth much, but it'll hold a lot. How about 20 bucks? I'm not trying to meet you up for less than that, so 20 bucks, or buy something else and I can throw it in if you want.
  
  
• [Dahon Folding Bikes with Accessories] (https://imgur.com/0rQ4DrX) Oh boy. I know that's a lot in one picture. So folding bikes are exactly that. Bicycles that fold in half for transport and storage. The black one is a more urban bike style. Looks more like a regular bicycle. Beefier frame, and I think the tires are designed to be puncture resistant. Best of all, there is a manual pump in the seat. The smaller one has a rack for transporting stuff. It's hard to see, but we have a lot of stuff for these bikes. Lights, locks, helmet. Various items for maintenance and repair. I think the black bike has locking skewers on the wheels, but I have the original skewers in a box. They should have plenty of tread left. Looking at the Dahon website, it doesn't even look like they offer a model similar to the black one anymore. For two folding bikes with accessories, I'm thinking 800 obo.
  
  
• [New K&N Performance Cold Air Intake 69-2544tp] (https://imgur.com/06ot7y5) [Another image listing compatible vehicles] (https://imgur.com/8omIMvu) This is entirely new and packaged. I only opened it to verify what it was. Everything is still wrapped up. [Amazon] (https://www.amazon.com/Performance-69-2544TP-Lifetime-Challenger-Chrysler/dp/B007CDYWEI) is selling this for 280 new. I'm thinking 250 and it's yours.
  
  
  
  

So I’m not sure if you’re considering a cold air intake or a short ram but I would recommend the HPS 27-122BL short ram intake . Personally I thought that it was very easy to install on my 05 TSX and it has held up great so far. It really gives the car a great sound when accelerating and improves the driving experience overall. I would highly recommend it.

We bought the K&N for ours and love love love it! We definitely saw an uptick in responsiveness and mpg (almost 2mpg). It adds a little bit of aggressive sound to accelerating as well.

https://smile.amazon.com/gp/product/B007CDYWEI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I have a 2016 base model SR5 and first i installed the TRD Cold Air Intake and with just the intake i felt like i could feel the difference in power, you can definitely hear the difference from the stock intake to the TRD CIA.

Its supposed to give you better MPG but because of the sound it makes when you really step on it you wanna floor it all the time so my MPG went down lol.

Then i got the Borla Catback exhaust and honestly its only a little bit louder then stock but you can hear the difference and it did add a little more power i feel. I researched on some different forums before i got it and it seems like a good amount of people preferred the Borla over other brands.

Supposedly if you do those two mods together it can add anywhere from 5-20 Horsepower. For both mods it set me back about 1000 dollars. Heres the links to wear i got them.


"Borla 140379 Stainless Steel Cat-Back Exhaust System"

https://www.amazon.com/Borla-140379-Stainless-Cat-Back-Exhaust/dp/B0046ZCAWG

"Genuine Toyota Parts PTR03-89100 TRD Cold Air Intake System for Select 4Runner and FJ Cruiser Models"

https://www.amazon.com/gp/product/B007W69P7E

Cold Air Intake. Boosts both horsepower and mileage - one of those things that's kind of a no-brainer for pretty much any car. Super easy to install, too. I had one on my tC as well.
https://www.amazon.com/dp/B007XZK9QU
https://www.amazon.com/dp/B0014I1O6G

Here is the cold air intake I purchased about two years ago. Same model and trim as yours too. I love the sound it makes, and it does not add much cabin drone at steady mid RPMs. But it does sound pretty amazing with the windows open and a full pull.

Here is the one I got, and I chose it because it is a 3 1/2” head on it. I just think the skinnier ones look a little cheap and this one is nice and beefy.

I did install it myself, it only took about an hour of actual work, and about an hour of just figuring it out since it does not come with instructions. If you have a sawzaw or skill saw you will be set. I had a lot of trouble getting the nuts on the back end (closest to the cabin) so I just did the front 4 and the connector for the neck of the snorkel. It seems super stable even though I omitted 3nuts on it. I feel like you might have better luck mapping it out and cutting the holes on the body panel then taking the panel off to finish the install so you can get all the nuts on securely.

My rig is a heap of rust so I don’t really worry about the specifics a whole lot. I’m changing everything over to a cleaner parts rig next year anywho, and I’ll probably pull the body panel then to make it perfect.

Very true, I noticed myself upon removing a previously installed air intake by the previous owner and putting just the stock intake back in, my midrange was peppier because it added the resonator back on. As this car is my daily, I live in the mid-range, and it was a welcome gain in power

Previous intake advertised a gain of a whole 3.5 horsepower at 6500 RPM, at the cost of a very noticeable low-mid range power loss.

This is just my suggestion/recommendation, the very next thing I would do to it other than any repair/restoration you might have to do being that you just got it would be a Cold Air intake, I just got this one from amazon and it makes a world of difference and you absolutely can’t beat the price.
Spectre cold air intake

How many miles does she have?

Is there any kind of noticeable ticking sound at idle/low rpms? If there is I got slightly bad news, your gona have to get some lifters replaced some time in the future. OR you could do a DOD delete and get rid of the problem forever plus get her ready for some real upgrades to the engine.

These are absolutely amazing cars and can go well beyond 200k miles if taken care of. I’m at 150k+ miles and she still drives like a brand new car. I have had my car for a little over a year now and I still have the dumbest grin on my face everytime im behind the wheel.

Thanks! Hilux 167 snorkel, yes it is plumbed in and the air box is sealed. Great value, but a PIA to install.

Maybe? Whats important is the tube size.

I think this is what your looking for though:
Amazon

Enjoy your WOOSH!!!

I have this intake. However I talked with this tuner recently and he said a drop in filter with the stock box could be better. Because the metal tubing of the short ram intake would increase temp's even though you are getting more air. The plastic with the stock system wouldn't transfer as much heat. Anyone know what's better?

> https://smile.amazon.com/gp/product/B007CDYWEI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I just like that you used a smile.amazon link :)

What do you mean by scoop? I have a short ram air intake yes, this one to be exact.

http://www.amazon.com/gp/product/B00D7IJ5BW/192-2920704-2160654?ie=UTF8&at=&force-full-site=1&ref_=aw_bottom_links

Is that better?

https://www.amazon.com/Airaid-AIR-200-104-200-104-Intake-System/dp/B0007LCZ2I/

It's a washable reusable filter. They also sell a filter cover that helps with dust (since you have to oil these types of filters)

I'm thinking about this one for my 3.4 swapped '86. https://www.amazon.com/Wotefusi-Snorkel-STH167RA-Litre-V6-Litre-I4/dp/B00F926L5W

hilux 167

https://www.amazon.com/dp/B00F926L5W/ref=cm_sw_r_cp_apip_YDers1rIvaOim

It is still a total custom install.

Wotefusi High Quality plastic rolling mold Car Air Ram Intake Snorkel Kit Set For Toyota 167 Series Hilux SR5 STH167RA https://www.amazon.com/dp/B00F926L5W/ref=cm_sw_r_other_awd_GGGFwbZNK974P

aFe 54-12452 Magnum FORCE Stage-2 Cold Air Intake System for MINI Cooper S https://www.amazon.com/dp/B00EV24OL4/ref=cm_sw_r_sms_apa_i_TgZYCbGVEP7NG

$427.50

Dodge Ram 5.7 Liter HEMI Cold Air Intake CAI System Mopar OEM https://www.amazon.com/dp/B01DM8QTGU/ref=cm_sw_r_sms_apa_OiMdAbJABAZFC

$304.61

2013-2017 Dodge Ram 1500 Mopar Ram Air Duct - 82214741 https://www.amazon.com/dp/B017HWLKSO/ref=cm_sw_r_sms_apa_fhMdAbR7TRMJG

https://www.amazon.com/dp/B0716Z6QW6/r

TRD intake

300 from amazon

https://www.amazon.com/dp/B00F926L5W/?coliid=I1NT63N2NDZ9ET&colid=HZM7VDQWBUBK&psc=0&ref_=lv_ov_lig_dp_it

The template isnt perfect because its for a hilux but you can make it work. Here is a T4R install guide.



You can do a taco snorkel too but you have to swap from a powered antenna and add a intake piece from the taco behind the fender. Here is that install guide.