Reddit mentions: The best craft scissors

We found 160 Reddit comments discussing the best craft scissors. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 89 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

3. Kai 5210 8-inch Dressmaking Shears (N5210)

Sharp, and Sturdy
Kai 5210 8-inch Dressmaking Shears  (N5210)
Specs:
ColorBlack Handle
Height0.7 Inches
Length4.15 Inches
Width10.4 Inches
Number of items1
▼ Read Reddit mentions

9. Slip-N-Snip The Original Folding Safety Scissors (1, 13 IN)

Slip-N-Snip The Original Folding Safety Scissors
Slip-N-Snip The Original Folding Safety Scissors (1, 13 IN)
Specs:
Height0 Inches
Length0.82 Inches
Weight0.000625 Pounds
Width0 Inches
Size13 IN
▼ Read Reddit mentions

15. Plus fluorine coat type ring scissors extra twist Black (japan import)

good for studentgood for childrengood for teen
Plus fluorine coat type ring scissors extra twist Black (japan import)
Specs:
Colorblack (black 19-3911tcx)
Height0.71 Inches
Length8.11 Inches
Weight0.110231131 Pounds
Width3.19 Inches
▼ Read Reddit mentions

🎓 Reddit experts on craft scissors

The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where craft scissors are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Total score: 42
Number of comments: 2
Relevant subreddits: 1
Total score: 21
Number of comments: 6
Relevant subreddits: 5
Total score: 8
Number of comments: 8
Relevant subreddits: 1
Total score: 8
Number of comments: 2
Relevant subreddits: 1
Total score: 6
Number of comments: 3
Relevant subreddits: 1
Total score: 6
Number of comments: 2
Relevant subreddits: 1
Total score: 5
Number of comments: 4
Relevant subreddits: 1
Total score: 4
Number of comments: 4
Relevant subreddits: 1
Total score: 4
Number of comments: 2
Relevant subreddits: 2
Total score: 4
Number of comments: 2
Relevant subreddits: 1

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Top Reddit comments about Craft Scissors:

u/kaidomac · 1 pointr/IIFYM

Thanks! No blog, but what are you looking for? I generally tell people it's not actually about the recipes themselves (which is counter-intuitive), because everyone has a different palette & likes different things, it's more about:

  1. Building up your own personal recipe database
  2. Creating macros for that
  3. Dividing up the macros for that meal or snack to fit your macros for the day

    This is the macro calculator I usually use for recipes:

    https://www.verywellfit.com/recipe-nutrition-analyzer-4157076

    I typically set the serving size to "1" (one) and then set the serving size again to the standard size (ex. 24 brownies), that way if I want to cut 20 larger brownies in the future, I can just do the math on my smartphone, because I have the macros for both the whole recipe & for the standard serving size.

    Once you learn how to calculate your own macros (using a calculator, buy a scale, adopt a meal-prep system, etc.), the world is your oyster, because with IIFYM, you can make any recipe out there fit your diet! I do use a handful of modern tools to help me cook; in particular:

  4. Scale
  5. Instant Pot
  6. Sous Vide
  7. Vacuum-sealer (with these bags & these scissors to cut the plastic bags)
  8. Baking Steel
  9. Inverter microwave with Sensor Reheat (large or small)
  10. Deep freezer (typically goes on sale for ~$629 FYI, and because it's an energy-efficient model, only costs ~$5 a month to run)

    That scale is the newer version of what I have. You can find cheaper versions for like $15 on Amazon, but I like this one because it does both imperial & metric (so whether the recipe calls for ounces or grams) & has a pull-out display for when you're measuring stuff in a bowl, like say chopped chicken - super convenient!

    The Instant Pot is an electronic pressure cooker (nice & safe, won't blow up like the old ones!) that gives repeatable results & cooks food mostly automatically; also great for liquidy meals like stews, chilis, soups, and bisques, for which I storage batches with Souper Cubes. Sous Vide is a bit more of an in-depth discussion (we can chat about that if you're not familiar!), but it basically involves vacuum-sealing your food (primarily meat & some veggies) & cooking them slowly underwater for perfect results every time. The vacuum-sealer is great for use with sous-vide (I vac-seal nearly all of my meats & stick them in my freezer) & also for storing leftovers, like shredded chicken & pulled pork.

    The Baking Steel is an amazing device that lets you cook incredible pizzas at home, as well as various breads (I do a lot of no-knead breads, which, if you haven't been introduced to that, is SUPER easy & gives you amazing results!). The Inverter microwave is a newer microwave design that can actually module the power level (most microwaves only operate at like, full power, and "blink" it on & off to simulate a different power level). The main difference with an inverter model, and this one in particular, is the the "sensor reheat" feature, which actually does a ridiculously good job of figuring out how to reheat your food properly, instead of just being hot & rubbery on the outside & still frozen in the middle. The deep freeze speaks for itself...just a place to store my raw & cooked food; I get huge costs-savings because I can buy food in bulk, vac-seal it, and freeze it literally for years.

    Now, keep in mind, this is all stuff I've built up over years of cooking, so first, don't feel pressured to buy anything, and second, don't feel like you need to get everything all at once. I enjoy cooking, but most of the time, cooking is a chore, and anything I can do to make that chore easier means that I'll do it more consistently because it's not such a hassle. Like, I can dump an 8-pound pork shoulder (bone removed & chopped into fist-sized chunks) with 1/2 a cup of water into my Instant Pot basket, set it for 70 minutes on Manual, dump it into my electric mixer bowl & shred it in about 60 seconds, let it cool down, and then vacuum-seal up 8 one-pound packages of pulled pork, which is good for 2 to 3 years in my freezer (vac-seal = no air = no freezer burn!). I can then use that pulled pork for BBQ pulled pork sandwiches, quesadillas, loaded baked potatoes, etc. & calculate my macros based off the quantity that I use.

    A lot of people take the meal-prep approach of making 25 trays of the same food, but man, I get pretty sick of eating the same thing all the time, haha! So that's why I use appliances (to make it easy) & picked up a deep freezer (to store raw & cooked foods in). Again, most people are pretty shocked when they start tracking how much they truly, actually spend on food every month - everything from grabbing snacks at the gas station convenience store to the extra goodies you get at the grocery store to the quick take-out stuff you get for lunch or on the way home - and once I realized how much I was spending, it was pretty easy to justify some home kitchen equipment purchases over time to help me in both saving money in the long-term & in hitting my macros.

    Once you get a personal recipe database built up & create an efficient workflow, IIFYM is actually fairly easy to stick with. I literally eat better than anyone I know & have a better (lower) food budget than most people I know. As far as eating schedules, you can do one meal a day, three meals a day, six meals a day, doesn't matter, as long as you hit your macro numbers for the day! I like to do 7 "meals" (more like snacks, really), as I have reactive hypoglycemia & find that eating smaller meals every few hours does a better job of keeping my energy up than just 3 big meals a day.

    part 1/3
u/gingeremily · 2 pointsr/Embroidery

FYI: I sent you lots of amazon links as I am not sure where you live or if you have access to craft stores such as Hobby Lobby or Joann Fabrics. I know for certain that I have seen most of these items cheaper at the store than what I could find online.

  1. Embroidery scissors. The good ones (I.e. generally not ones that come in sewing kits) are incredibly sharp and a must. They are used exclusively for cutting embroidery floss. They make some really pretty ones that come in all sorts of colors and patterns.
  2. A hoop or two. I personally prefer the plastic ones as they are a bit more durable and good for multiple projects. I also don't typically display my finished work inside the hoop. If she plans on making wall hangings, I would go with the wooden ones. They are typically a bit cheaper when you buy them at a craft store (I believe I have seen them from between 1-3 USD.) They have a nicer finished look and isn't that big of a deal to buy a new one when you start on your next project. I would buy her two of the wooden ones in two different sizes (a 4 inch and 6 inch one)
  3. a box for embroidery thread. this one on Amazon that I listed is nice since it also contains the bobbins as well. These boxes usually cost about 3 USD at the craft store and are great for holding all of your different colors of embroidery floss. they often have one larger compartment which is perfectly sized to hold needles and the embroidery scissors as well. The floss bobbins are great at keeping everything organized in the box as well.
  4. about a yard of fabric. Muslin is generally pretty cheap. For a beginner, I might also suggest Aida cloth. It it woven in a way that there is a "grid" in the cloth which makes it easier to make straight lines. It is typically used for Cross Stitch but can be used for embroidery as well. The cloth is more expensive that the muslin, and I personally don't prefer the finished look of the fabric, but it makes it easy to make straight lines and practice stitches. Someone on here also mentioned buying Fabric quarters which is a great idea. They come in a whole bunch of designs, run around 2 USD a piece, and work pretty well for embroidery.
  5. Needles. You don't need the golden eye ones like I have listed here. Just make sure that the package says it's for embroidery as the of the needle varies depending on the type.
  6. Now here's the hardest part of the whole thing: Embroidery floss. Most stores offer DMC brand cotton floss by the skein for about 0.48 USD. The problem is that there are literally hundreds of different colors and picking out just a few might be a bit difficult. The sets that DMC does sell are a bit pricey and aren't often set up to give you a beginner's set of colors. You could however buy an off brand set of embroidery floss that does come in a nice variety of colors and is cheaper. However, I have found that a lot of these packs have low quality thread. It often can look dull when compared to DMC brand floss. (look how Satin-y this Flower looks with the more expensive floss!) I have also heard of some people say that the colors can run when they get washed. All that said, these packs are inexpensive and great for someone just starting with embroidery as there are so many colors to choose from. Its great when you are practicing or are not 100% sure of what you are going to make yet.
  7. transfer pen: I bought a set of those Frixion Pens that someone else mentioned in this post and I love them. They are a bit pricey. I believe that I bought my set at Target for 6 bucks. It came with 5 different colors including pink and silver which work great on dark colored fabrics. These pens are used to plan out your design on your fabric before you embroider. These pens are special in that they disappear completely with heat (such as an iron). If you don't want to go that route, they also make Water soluble markers which serve the same purpose. They don't work quite as well in my opinion as they tend to erase themselves after a few hours/days. They have the advantage of being inexpensive and work fine for small projects.

    I hope that all of this helps. Good luck on the shopping. I know that whatever you end up getting her she will love.
u/skittles_rainbows · 11 pointsr/specialed

Ok. Did some reading.

I'm not going to sugar coat this because well, I don't believe in that.

Welcome to the dark side. We have goldfish crackers. (BTW my roommate was an aide for 20 years and said that they are convenient because if they are attacking you, you can throw them at them and it will distract them for a while.) Invest in goldfish crackers and fruit loops. They make good rewards.

Buy this book. I really wish someone had recommended me that book before I stepped into an autism classroom. I reread it now every once in a while and still learn new things.

Start here. Go through the rest of her blog. Subscribe to it. She runs an excellent easy to understand blog.

Visuals are insanely important. Subscribe to LessonPix. Your school may have Board Maker, but I find it very difficult to use. Plus, LessonPix is online based so you can create something at home and then access it at school or vice versa. It is like $36 a year, which is insanely cheap. For my visuals, I usually put a picture with the word on the bottom.

You will need velcro. Do not buy it from a store. This is a wholesale place online. They have the cheapest velcro out there. I buy coins so I don't have to cut it, it makes it a lot easier. If you are going to cut velcro, get titanium scissors. They will not gum up when cutting velcro. Have a system with your velcro so you don't have random patterns of velcro. I usually do soft on a surface and rough on anything that travels.

You are going to need a personal laminator. My binding has the cheapest 5 mil laminating sheets out there. Use 5 mil for anything that travels and if its going to stay on a wall, use 3 mil. 3 mil or 1 mil (what the school laminating machine uses) tears easily and doesn't last. Once you create something, you don't want to lose it. Most any laminator will do. I like the Fellowes brand. This is a very good one. That my binding website has some awesome deals on laminators. Whatever you get, just make sure it doesn't need a carrier sleeve to laminate because those are annoying. Just make sure that if you from 5 mil to 3 mil you switch the laminator over to 3 mil and let it cool or there will be a burning smell. To save time I bought one of these. Just makes cutting faster.

Don't overspend on stuff for the classroom. Look at oriental trading post. You can find a lot of stuff there. Sign up for the newsletter and wait from a free shipping coupon, don't pay for shipping.

Get yourself a couple pairs of these. I like the 18 inch ones. Make sure your tetnus shot is up to date.

You probably need to brush up on your evidence based practices for autism too.

I know this is a lot of information. But these are all things I wish people would have told me before I started teaching this level of autism kiddos. I went into it blind. I've had to put all this together through reading, training, and observation. Its easier just to be front loaded with the information.

My first year teaching, I was put in a K-1 mod/severe autism class (your setting 3). It was the first autism specific class at the school. Nobody gave me any support. I had no idea what I was doing. I had very little formal training on autism specific teaching. It was like being sucked into a vortex in deep water with nobody around to help me. I didn't even know where to go for information. That's why I try to help people and be completely honest. I'm not trying to overwhelm you.

If you need help and support, let me know. My MA.Ed is in Special Ed with a specialty in Autism Spectrum Disorder. I am teaching a class similar to yours at an elementary school level next year. I'm really good at dealing with behaviors and data too.

u/Blackeye30 · 4 pointsr/Leathercraft

Here's my starting out basics list:

Must have:

A cutting mat - I have this Cutting Mat which has both standard and metric measurements, very handy for watch straps which are in mm

Ruler - Something like this you probably want cork-backed metal for non-slip and to protect the leather surface, size is up to you

Cutting Tool - I recommend both a very sharp knife like a Stanley utility knife which you probably already own, plus a Rotary Cutter - way more useful than you realize. This is a deep rabbit hole, there are a huge selection of fantastic cutting tools out there, I would say if you get serious this should be an early upgrade but for getting started, a rotary + detail knife is a good start

Wing Divider - Marking patterns, stitch lines, a million other uses, something like this

Fastening - if you're stitching, you need waxed thread and blunt tip needles, as well as an awl (this is one tool that is not worth cheaping out on, get a Barry King and be done with it) and a set of pricking irons, generally a 6-prong (or so) for long straight runs, and a 2-prong for corners. I'm not recommending a specific brand here because the price range is large, and I think there are a lot of newer players making good quality products. I started with Seiwa chisels and they served me well until I upgraded to Muxi Irons, will probably go KS blade punch at some point.

Alternately you can use rivets and a rivet setter (make sure the sizes match); either way you'll want contact cement as well, barge or weldwood are good choices from any hardware store

Helpful items:

Wax paper - you can use it to get nice straight lines with your contact cement

Stitching Pony - I did without one for the first few months but it's a lifesaver, this would be an early priority if you're stitching things

Thread nippers - cheap and convenient These

Skife/Skiver/Skiving knife - Used to thin the edges of pieces and reduce bulk/combine more seamlessly This or This

Isopropyl alcohol - used for cleaning surfaces and diluting dye, if you choose to dye your pieces

Other stuff:

Edges - Edge finishing is whole art in itself, there are different techniques depending on preference and the type of leather used, and accordingly will require different tools. If you're going for the rustic look, you can leave your edges unfinished. Where I live in Portland, lots of people actually prefer that look, but to each their own. Veg tan is most often finished by burnishing the edges, with involves sanding until completely smooth, then wetting with water or gum tragacanth, and rubbing briskly with something smooth, generally a wood burnisher, followed by some wax and another burnish with something like canvas to seal the edge. Chrome tanned leather is generally finished with edge paint or by rolling the edge over so there is no exposed edge.

Dying - If you're using fiebings, MAKE SURE you get the "professional oil dye" line, the standard line bleeds color like crazy. It's an alcohol-based dye so you can dilute with isopropyl/rubbing alc and you can also combine colors without issue to create your own. Two coats gives a nice deep color, and once it's dry buff it with a dry cotton rag to get off any excess. I use pieces of 2" foam to apply it, those tiny daubers don't do much for larger pieces. Also get some nitrile gloves, you'll thank me later.

Beyond that, you start getting into lots and lots of specialty tools, which you'll be able to identify when you get there for specific application. But hopefully this helps and gives you a basic rundown.

u/ASnugglyBear · 2 pointsr/boardgames

>Other boxes?

Game boxes or really any boxes can be put in and will be structurally sound to "raise the floor" of a section like you did in your build so you don't have to "dig for pieces". You might have to cut off one wall of the box to make it fit, but that's a great way to get a weight bearing "floor" that's easily reachable if you don't need the empty space in the box for storage. It is a lot faster than building structure elements if you can just cut up a small box you got from packaging at the grocery store, and if lining the box, no one will ever see it.


>Nested trays

I've done that. I have innovation in a bigger box, with one of the actual innovation boxes inside as a holder of play mats.

Use this on almost any cut over 1 inch
T-Square

Use this along the T-Square to make super straight, square lines. The reviews say "make sure and put some excess foam board underneath" but I've gotten by with cardboard and a self healing mat: Linear Foamboard Cutter

If you're making boxes that are to be structurally stable on their own, will be passed about, or will need to support an ailing box, don't skip using this. It makes a perfect glue surface and good looking (but not perfect) corner: Rabbit Cutter. This product packaging shows what a rabbit looks like.

This prevents your table from getting hurt. I believe they all use that chemical (phalates maybe?) to be soft and such, so keep it away from pregnant people and children. A self healing mat

This is more useful on paper itself than long cuts on foam board, as it doesn't stay against the T-Square well. But, for short cross cuts, I think it's superior than Xacto knives and utility knives: [Rotary Cutter](https://www.amazon.com/Fiskars-Comfort-Grip-Rotary-Cutter-45mm/dp/B00DD2W1Q8/ref=sr_1_9?s=office-products&ie=UTF8&qid=1492008006&sr=1-9&keywords=rotary+cutter](https://www.amazon.com/Fiskars-Comfort-Grip-Rotary-Cutter-45mm/dp/B00DD2W1Q8/ref=sr_1_9?s=office-products&ie=UTF8&qid=1492008006&sr=1-9&keywords=rotary+cutter)

u/Deusis · 5 pointsr/Leatherworking

---

Section 1: Tools

---

Note: Just because it is more expensive doesn't mean it is better. You could get by just fine with the "cheaper" options.

---
| Tool | Required vs. Optional | Use | Notes | Price & Link |
|:---|:---:|:---|:---|:---:|:---:|
| Tandy Wholesale Membership | O | Allows you to get better pricing at Tandy. | This is definitely optional. Items will cost slightly more without it OR if you have a tax ID you can get the membership with better pricing for free. | $35 / Free|
| Awl Haft | R | The handle which will hold your blade. | This particular haft allows for different blades to be added or removed with ease. | $16 / $35|
| Diamond Awl Blade| R | This is the blade used for piercing the holes in your projects.| This goes in the awl haft.| $4.80 / $28
| Channel Groover | R | Used to measure and gouge channels where your thread will lay. | Some say gouging a channel is optional however I find it to be required. It further protects your thread from damage. | $16 / $80 |
| Overstitch Wheel | R | Marks where you will punch your holes. | This particular overstitch wheel is a few dollars more than the versions that only offer one wheel. | $24 / $225 |
| Edge Beveler | R | Used to bevel and round off the edges of your project prior to burnishing. | Sizes vary. The smaller the number, the smaller the round edge. | $12 / $55 |
| Adhesive Glue | O | Used to hold your pieces of leather together prior to piercing the holes. | Some people prefer binder clips instead of glue. I've found that the clips end up making marks on my projects so I've always stuck with glue. | $6 / $30 |
| Gum Tragacanth | R | Used as a burnishing agent for your edges.| Some people use saddle soap. I prefer gum trag.| $6.40 / $21|
| Harness Needles | R | Used in combination with the thread for your projects. | Avoid the stitching needles. They break very easily.| $5.99 / $7.50 |
| Xacto Blade | R | Used for cutting projects. | You may have one of these at home already. Be ready to have replacement blades handy ($21.95) | $2.49 / $50 |
| Self-Healing Cutting Mat | R | Used for cutting your leather projects.| You may have one of these at home already. If so, you can obviously use that.| $14.73 / $50.80 |
| Cork-backed Ruler| R | Used for cutting straight lines.| I highly recommend the cork-backed version. It will save from accidental cuts/slips.| $4.80 / $14 |
| Burnishing Tool | R | Used in combination with the gum tragacanth to get a good burnish.| A good piece of canvas can be used as well. | $8.99 / $80 + $99|
| Sanding Tool| O | Used to sand down the edges prior to burnishing.| You might have sandpaper at home. Feel free to use that too.| $7.30 / $0 with dremel|
| Steel Square | O | Used for creating nice, even squares/rectangles for projects. | Learn to use this correctly!| $8 / $14|
| Thread Cutters | O | Use these for cutting your thread in the hard to reach places without running the risk of damaging your project. | Scissors work for cutting thread and the xacto blade can work for cutting thread inside your projects -- just be careful! | $3.95 / $39 |
| Maul | O | Used for end punches, rivets, snaps, chisels, or irons. | You really only need one of these if you are planning on doing any of the activities mentioned previously. | $20 / $55 |
| Pricking Iron/Chisel | O | Use these to mark or punch your holes instead of an overstitch wheel and awl. I prefer using the overstitch wheel and awl but others like the irons/chisels. | There is a big difference between irons vs. chisels, diamond vs. lacing. They all produce different results. Definitely ask before purchasing! The ones I linked are very different.| $12 / $259|
| Creaser | O | Used for decorative creases on things like card slots. | Definitely optional and definitely personal preference. | $14.40 / $72 |
| Wax | O | Used for burnishing. Gives the edges a nice seal. | The $10 is my top secret wax I use. I bought a bunch on sale for $5 and it is fantastic. | $4 / $10|

---

u/ToiletSpiders · 1 pointr/sewing

I'm still a beginner really, but last year I bought myself this machine and I love it!

Brother CS6000i Feature-Rich Sewing Machine With 60 Built-In Stitches, 7 styles of 1-Step Auto-Size Buttonholes, Quilting Table, and Hard Cover https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_cp_api_9sGsybTC407ST



It's well within your budget, so I would pair it with these must haves for sewing/quilting.

Fiskars Rotary Cutting Set https://www.amazon.com/dp/B000B7K9UI/ref=cm_sw_r_cp_api_IuGsybYXBGVY7

Dritz Deluxe Seam Ripper https://www.amazon.com/dp/B0001DSIVY/ref=cm_sw_r_cp_api_svGsyb0XBGHNQ

Best Titanium Scissors - 3 Shears in One Pack - Precision Cutting Blades For Sewing - Office Scissors - Art and Craft Set - Sharp Scissors That Wont Break https://www.amazon.com/dp/B017FT5OJA/ref=cm_sw_r_cp_api_.vGsybVQ6H09H

She really will need those things! All total this should be about $200, but she will still need thread & fabrics. This is where I would suggest a gift card to your local craft store so she can pick out her own.

To me, that would be the perfect gift set for someone wanting to get into sewing and quilting.

The machine itself, I really like as a beginner. I have made 5 quilts this year, as well as Christmas stockings, quilted tote bags, a table runner, a few pillows, etc.
It was really easy to set up. Eventually if she gets really serious with the hobby she will want to upgrade. But personally I'm totally satisfied and don't foresee myself upgrading unless it breaks or something.

u/catbuttoverlord · 4 pointsr/sex

When I started doing bondage, I got a bunch of thick (1/4 inch) cotton clothesline from the hardware store, cut it into 15ft and 30ft lengths, and tied a tight overhand knot at the ends. Rope is always easy to explain away, particularly when it's "normal" rope and not the nice bondage-specific stuff. If you find that you really like tying, you can always buy better rope, and then you have convenient lengths of clothesline for other things.

15ft is enough for tying wrists together in a two-column tie, and you can use that same simple tie to tie together anything that has two 'columns', like two ankles, an arm to a waist, two sides of a bent leg, and so on.

If you want to, say, tie wrists and ankles to the bedposts, what you want is a one-column tie, which is just a secure and comfortable way to secure one 'column' of the body to something else.

If you want to get more into bondage, 30ft is enough to tie a basic chest harness, which you can use to tie other things to, as a convenient 'handle' for your partner, or just to give them more of a feeling of confining rope. A common chest harness is a box tie, or a takate kote, which is basically a chest harness that binds the hands and arms instead of letting them stay loose.

If you want something other than rope, I'd recommend something thicker like scarves rather than strips of fabric. You can pick up scarves at basically any women's accessories section of a department store. Fabric tends to knot tightly, so thicker fabric is a bit better, and it's good to keep something around to help work the knot out (like a knitting needle to stick into the knot) or something to cut the fabric (like a pair of safety shears or a knife you're comfortable using close to skin). Actually, keeping those things around is important when you're tying with rope, too.

u/cytherian · 2 pointsr/mechanicalpencils

Yes, the Japanese are pretty darned good with scissors. The USA has a company that makes some really amazing ones too. CutCo. I have a set of their Super Shears. Very pricey... but I lucked out and got a lightly used pair for $70 USD. CutCo has a lifetime warranty, no proof of purchase required. They even have a reasonably priced refurbishing service. They're absolutely amazing, tough, easy to clean, and feel like they'll last a lifetime (which they will).

But I have to admit, they're not as "sexy" looking as some Japanese designs.

These Plus Flourine black scissors look really nice. LINK. Just $14.

u/LeeHarveyT-Bag · 7 pointsr/CrossStitch

Hello all! I wanted to share with you my organizer for all my daily cross stitch stuff. I had been looking for an easy solution to store my stuff without having it all over my coffee table and be able to easily move between rooms to continue working on my projects. I finally found this little organizer on Amazon and it's PERFECT for what I needed. I thought it would be fun to go through my bag and show what supplies I keep in there. Not pictured are obviously my hoop this is my all time favorite and the grime guard that I am trying to learn to love.

Everything is stored in the Roll-up canvas organizer that I got from Amazon. It's made for crochet supplies, but comes empty so you can load it up with your own stuff. Lot of designs available, but most importantly, CATS!

Section 1:

-Dritz seam ripper

-Cottage Cutz 2-in-1 needle threader

-Basic travel scissors

-Embroidery Scissors

-Needle Minders - one homemade from a dichroic pendant from a local craft fair, one made from a Babypietattoo hand painted clay pendant

-Tiny magnet set - I used this as a "minder" before I got around to making new ones. I keep it inside my kit now to use for my needle threader. I usually stitch with the kit opened in front of me, so it's easy to just throw the threader down on the magnet and have it handy

-Needle threader


Section 2:

-Needle Twister - this thing totally rocks and I want one for each size of needles!

-Magentic needle case

-Assorted sewing needles


Section 3:

-Needle minder from Maggies Minders

-Hem clips - I got mine in a vintage sewing box from an estate sale. They are perfect for clipping back extra aida to keep it out of the way

-Clover fine tipped water soluble marker

-Snip-a-Stitch scissors


Section 4

ORT [Thread catcher] from Maggies Minders

DMC magnetic needle case

Dritz Fray Check with applicator tip

u/impregnantnowwhat · 4 pointsr/sewing

Depending on what you are sewing here are a few tools I'm so glad I have, with a few Amazon links to versions I have.

  • Cutting Mat & Rotary Blade: When I can, I prefer to cut with a rotary instead of shears.
  • Acrylic Ruler: Great with the Rotary and to see when cutting things like bias tape
  • Loop Turner: I like this one because you can do loooong things like lacing for the back of wedding gowns.
  • Point Turner: Obsessed with this little thing when making bows, waistbands, etc.
  • Magnetic Pin Cushion: As other people have mentioned, this is incredible.
  • Thimble: If you are hand sewing any finishing details, this is my favorite thimble! (I see you have a couple, but I'm obsessed with this comfy pink one)
  • Fray Block or Fray Check: Good for when you need to leave a raw edge on something.
  • Snippers: Perfect for trimming threads or small things your shears will be too big for. I LOVE this pair, they are inexpensive and sharp!
  • Good Iron and Ironing Board: Is it time for an upgrade? Press those seams!

    Have so much fun! Sewing has brought me so much joy and I hope it does the same for you.
u/Betorcamp · 1 pointr/EDC

From Top Left to Right.

Gearward Compact Survival Cord Mini, 25’
[http://gearward.com/collections/frontpage/products/compact-survival-cord-mini-technora]


Tucked inside the folds of the cord are: a micro neodymium magnet, a pen spring, a small safety pin.
[https://www.amazon.com/10-100pcs-Neodymium-Strong-Magnets-MarbellStore/dp/B01LZEJWVK/ref=sr_1_1?ie=UTF8&qid=1484275063&sr=8-1&keywords=micro+neodymium+magnets].
Have actually used this for: fishing some ladies keys from a grate at the school before the janitor could show up. Also repaired a neighbour’s skate lace with the cord.

Night Ize Inova thumb light (three functions, bright, medium, flash)
[https://www.amazon.com/Nite-INOVA-Ultraviolet-Microlight-Clip/dp/B00CG17GDA/ref=sr_1_2?ie=UTF8&qid=1484275003&sr=8-2&keywords=Nite+Ize+inova]
Have actually used this for finding a lost earring in a dark movie theatre. Thought I would use it to find the locks on my house and car, but everything is pretty well lit.

Stanley Key Chain Tape Measure
[https://www.amazon.com/Toysmith-Key-Chain-Tape-Measure/dp/B000F4G5NW/ref=sr_1_fkmr1_1?ie=UTF8&qid=1484274328&sr=8-1-fkmr1&keywords=stanley+keychain+tape+measure+1m]
Have actually used this for buying a new sideboard from an antique shop. Knew the measurements of the room and used this to determined it wouldn’t fit in that room. LOL.

Nite Ize inka Mobile Pen
[https://www.amazon.com/Nite-Ize-Mobile-Stylus-IMP-M1-R7/dp/B00BAWSOD2/ref=sr_1_2?ie=UTF8&qid=1484275029&sr=8-2&keywords=Nite+Ize+Inka]
Have actually used this tons of times whether someone doesn’t have a pen, or for myself at the passport office or recently at the lawyer’s office.

Prime-Lite 5-1 Multifunction Keychain with Light
[http://www.prime-lite.ca/camping_outdoors/5-in-1-multifunction-keychain-with-light-24-852.html]
A new addition. I like the full sized Phillips screwdriver bit. Has a flashlight. Used it to open the bottom of my son’s new RC car’s battery compartment. Has a knife, too. Good for package opening. Not much else.

[Nite Ize DoohicKey Keychain Multitool]
(https://www.amazon.com/Nite-Ize-DoohicKey-Multi-Tool-Stainless/dp/B00FIX126K/ref=sr_1_2?ie=UTF8&qid=1484274688&sr=8-2&keywords=Nite+Ize+keychain).
Actually used this recently to pry open my frozen gas cap cover.

[Mini Bic Lighter]
(https://www.amazon.com/Lot-Bic-Mini-Multi-colour-Lighter/dp/B00863XN4I/ref=sr_1_1?ie=UTF8&qid=1484274798&sr=8-1&keywords=mini+bic)
To light cigs, mostly. Haven’t needed to start any urban fires. But… I wrapped over it a thin layer of [To-Go Gorilla Tape] (https://www.amazon.com/Gorilla-6100101-2-Duct-Tape-Black/dp/B01M2AAGTZ/ref=sr_1_1?ie=UTF8&qid=1484274817&sr=8-1&keywords=travel+gorilla+tape) and generic electrical tape at the base. [I interwove the electrical tape through a generic (plastic coated) paperclip so that it acts as a keychain. Haven’t lost one yet.]. I used the duct tape recently when a poster fell down at my kids’ Christmas recital and I was able to peel a few pieces off for the teacher to put it back up.

[Mini Sharpie Marker]
(https://www.amazon.com/Sharpie-Permanent-Markers-Assorted-4-Count/dp/B000GOZXA2/ref=sr_1_1?ie=UTF8&qid=1484274852&sr=8-1&keywords=mini+sharpie+marker)
Used it recently to write a nasty note to a jerk who dinged my car. Also to get an autograph on a menu of an actor you’ve probably never heard of, but who was big growing up in Toronto.

[Generic Folding Travel Scissors]
(https://www.amazon.com/UCEC-Scissors-Xiaoquan-Slip-N-Snip-scissors/dp/B0199VSV42/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1484274914&sr=1-1-spons&keywords=folding+scissors&psc=1)
Sharper than I expected. I recently used this to save the day when my son refused to wear his new Christmas sweater for a family picture because the tags were itching his back. Snip. Problem solved.

[Gerber Dime Micro Tool]
(https://www.amazon.com/Gerber-31-001040-Dime-Micro-Tool/dp/B0079J51JU/ref=sr_1_4?ie=UTF8&qid=1484274877&sr=8-4&keywords=gerber+dime)
Good to have this as it has pliers, but I haven’t used it other than to pull yellow lego heads out of lego helmets.

[Nite Ize Key Rack Locker]
(https://www.amazon.com/Nite-Ize-Stainless-Carabiner-MicroLocks/dp/B00FIX12AG/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1484274970&sr=8-1&keywords=Nite+Ize+Keychain)
A good way to keep it all together. These clips don’t lose their… clippieness.


So, I love this little EDC. Will continue to use it, thought I don’t see many ways to improve it!


u/susandennis · 5 pointsr/sewing

Ok, #1 that is the coolest idea on the planet! There is no better money you could spend on a gift for a sewer. Especially one without decent scissors. (or shears or cutters or whatever).

I use Gingher and Kai. Both are great but Kai is definitely easier on the hands. I've got 67 year old hands that are in good shape but not in 30 year old shape.

These Kai Shears are the ones I use (and love) every day. They aren't as expensive as you want to spend so might I suggest adding these embroidery scissors? They are so very handy and the larger finger holes make it much easier for old hands to get them working efficiently.

Seriously, this is just the nicest idea.

u/ldjd · 1 pointr/Random_Acts_Of_Amazon

Oh mom, mom. Please, I reeeeeeeeeeeeeeaaaaaallllllyyyyy need these new scissors really really really bad! I know you said under $5, but mom, they're $5 even. Pretty pretty please Mom! Remember when I was making my last crochet project and I was struggling to cut the yarn because my scissors were all dulled out?! This would save me time so I wouldn't have to take so long to cut a piece of yarn. Imagine how much more I can help you out now if I just have these new, sharper scissors! I can cut that yarn and have more time to help you do the dishes and the laundry. I promise to clean my room every day if you buy me these scissors! You know what mom? You're the bestest mom in the whole wide world! Pretty please with sugar on top!

u/gir722 · 3 pointsr/Random_Acts_Of_Amazon

The most mundane thing I could think of

product review: I was a little nervous with two 8 inchers to fill my hands but I was pleasantly surprised by how they fit right in. They did their job and they did it well. I was very pleased and will share them with my friends and neighbors when they need to get the job done!

u/scrapstitcher · 1 pointr/CrossStitch

These scissors are pricey but really cool.

https://www.amazon.com/dp/B017LWBTCC/?tag=097-20&ascsubtag=v7_1_3_2pt_42co_420_x01_-srt-

Here is a link to some Star Wars cross stitch patterns ranging from simplistic to advanced patterns.

https://www.thesprucecrafts.com/star-wars-cross-stitch-4155787

I just recently discovered the use of needle minders. I love them!!! Here's a link for him a Star Wars one.

https://www.amazon.com/Star-Resin-Needle-Minder-Notion/dp/B07N6KDNDY/ref=sr_1_50?keywords=needle+minder&qid=1565287373&s=gateway&sr=8-50

Another item that I have found extremely useful is a disappearing ink marker. If he is working on counted cross stitch, once the center of the cloth is found for the pattern, the grid can be marked in relation to the center and it makes it extremely easy to know where the pattern is according to the grid lines. The ink disappears in less that 24 hours without any residual color (I use purple to contrast the aida cloth and the thread colors).

I hope he finds it enjoyable and relaxing.

u/PunNeverIntended · 3 pointsr/knives

I've never owned a pair of these so I can't speak to the quality, but the reviews look positive and their cheap enough to try out (IMHO). However, I'm not sure how heavy duty a scissor your looking for. These might be worth looking into.

Here

Found a chrome pair as well.

Here is a video of them. (not much of a video).

Edit: Came across these as well.

Edit 2: Just found these, they are made by kershaw which is always nice, and they sound a lot like what you were describing in the OP. Video here. Seems they come in black as well.

u/dnalloheoj · 2 pointsr/canada

>Headbands and bandanas are amazing if you want to look like a basketball player or Axl Rose.

Cool? That's your opinion, just like my opinion is that a top-knot makes you look silly. I'll take both of those over the latter.

>Also, you said dozens of different ways. I only see 7 things linked here with a few duplicates.

Lmao. That's what you want to nitpick about? The goal is keeping hair out of your eyes, not fancy hairstyles:

http://f.tqn.com/y/menshair/1/S/2/1/-/-/bald5.jpg

https://www.amazon.com/Sexy-Hair-Control-Maniac-Shine/dp/B00GYGKQTY/ref=sr_1_2_a_it?ie=UTF8&qid=1499281267&sr=8-2&keywords=hair+control

https://www.amazon.com/xtava-Pinup-Hair-Clips-Professional/dp/B01LXCL45M/ref=sr_1_11_s_it?s=beauty&ie=UTF8&qid=1499281288&sr=1-11&keywords=hair+clips

https://www.amazon.com/Soft-Style-Butterfly-Clamps-Assorted/dp/B000X20Y4C/ref=sr_1_8_s_it?s=beauty&ie=UTF8&qid=1499281288&sr=1-8&keywords=hair+clips

https://www.amazon.com/Toboggan-Timeless-Clothing-Accessories-Top/dp/B01LZ27V22/ref=sr_1_1?ie=UTF8&qid=1499281462&sr=8-1&keywords=beanie

https://www.amazon.com/VIKINGS-Chieftain-Safety-Swedish-Platinum/dp/B011L8WJIA/ref=sr_1_4_s_it?s=beauty&ie=UTF8&qid=1499281551&sr=1-4&keywords=razor

https://www.amazon.com/Westcott-Titanium-Scissors-Straight-Handle-13901/dp/B000P0LNRE/ref=sr_1_3?ie=UTF8&qid=1499281558&sr=8-3&keywords=scissors



u/awmuhguh · 2 pointsr/Embroidery

Hi! I got a three-pack of those on Amazon for $5.99, and they’re great! Gave one of them to my boyfriend, who does a lot of hobby work on motorcycles, and he really likes them, too! The only thing is that they stay open like that when not in use, so you have to be careful because they are super sharp.

u/TimDRX · 1 pointr/Gunpla

I like Iris Scissors for em, but you don't need any particularly special pair. I have these, they're pretty good!

http://www.amazon.com/gp/product/B002N6BPZS?keywords=iris%20scissors&qid=1453486830&ref_=sr_1_2&sr=8-2

u/SpookyBDSM · 5 pointsr/BDSMcommunity

35 feet is honestly long for rope stuff, even for people who do a lot of rope stuff.

Most ropes come in 30 feet pieces and are doubled over to create more surface are, for a total of 15 feet of working length.

Many people prefer even shorter lengths, in the 23 foot range, again doubled over for more like 11 feet of working length.

Some rope packages come with 5 lengths of 30 and 2 lengths of 15. The lengths of 30 are used for complex ties, while the 15 are used for smaller ties or finishing longer ones where you need just a little more rope.

The 15 foot lengths are again doubled over for a very manageable length of 7.5 feet.

You could cut it into 3 pieces. Two 10 foot lengths and one length of 15. Knot the ends off, or use tape if you do not intend on washing it. This would give you enough for say-

u/JamesWjRose · 1 pointr/sex

Good for you.

Please learn to play safe. Do not hesitate to say that something bothers you (mentally or physically)

I did my wife's hands up too tight (oops!) and she immediately mentioned the tingling in her fingers. Do not wait to say something is too tight, too rough, etc.

I got this rope (200ft) and it's very soft and doesn't tangle.
http://www.amazon.com/gp/product/B004432CHI/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1

Also, make sure you have a set of sheers like this:
http://www.amazon.com/gp/product/B004NG8V9E/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1

u/frankenduke · 1 pointr/BDSMcommunity

The local Home Despot is the best place to get started.
You want the kind or rope without a core like
twisted nylon

There are some good resources online for how to do ties. Start with twisted monk

And buy a set of EMT shears
Important in case of emergency either physical or mental.


Very important, it's ok to tap out and stop right in the middle, by either side. Set up a safe word.

After that spend a bunch of time talking about it. What you both liked, didn't like, want to try..

u/PersonInYourMirror · 2 pointsr/BDSMcommunity

Get a pair of these: https://www.amazon.com/dp/B004NG8V9E/

If you end up using neckties you absolutely positively need a pair.

They're cheaper, safer, and better than anything you may have hanging around already.

u/Ammulfinger · 1 pointr/childfree

It may be the crafter in me, but a really cute pair of small scissors would be both appropriate and useful...

You could also make label for a grooming product of choice calling it "Tied and True (lip balm, moisturizer, etc..)"

u/Hirundo_Bos · 2 pointsr/CrossStitch

Ooh, Star Wars sounds like a good place to look for easy patterns!

I'm a guy myself, and not all that self-conscious about it, so it may not count, but my own favorite scissors are these ones ... it's a very common design, I think, the link is just the top hit I got from google.

u/socinus · 2 pointsr/sewing

Good Job! Remember there are no rules in quilting except have fun. I like your fabric choices. And if that's your first block, you're a natural.

I read another comment about mistakes; no one will notice them unless you point them out. Also, in Japanese art, there is a thing called wabi-sabi which is sometimes brought about by an "intentional mistake" to demonstrate that the art was made by a human hand. Something too rigid in it's lines can be cold and unfeeling. (wabi-sabi can also be about finding the beauty in naturally aged and worn objects.) Beauty is in the worn spots and imperfect lines.

PS, if you're looking for really sharp scissors ever, KAI, they make different scissors for cutting fabric or nipping threads. These are great if you ever get into doing a hawaiian quilt where you cut through 8 layers of fabric for the design.

http://www.amazon.com/Kai-5210-8-inch-Dressmaking-Shears/dp/B004MN72VG/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1373484941&sr=1-1&keywords=kai+scissors

u/samadams240 · 1 pointr/BuyItForLife

I have 2 pairs of these and they are incredible. Wustof would be a great product as well.


Kai 5210 8-inch Dressmaking Shears (N5210) https://www.amazon.com/dp/B004MN72VG/ref=cm_sw_r_cp_api_i_LXqnDbF71REDC

u/FriskyMinx · 6 pointsr/AskRedditAfterDark

I'm surprised no one has mentioned Knotty Boys yet, they have a lot of good tutorials.

Also: If you are going to try rope bondage, please have EMT shears on hand. You can get them for $4 on Amazon. These are designed to cut material off of a person without harming their skin; it is not safe to use regular scissors or a knife to cut rope off of someone in an emergency.

u/PepperVL · 3 pointsr/CrossStitch

I have these to travel with. Slip-N-Snip The Original Folding Safety Scissors (1, 13 IN) https://www.amazon.com/dp/B005J091G0/ref=cm_sw_r_cp_apa_i_bVCNDbM6HN77K they fold and unfold very easily, but don't accidentally come loose.

u/ImALittleCrackpot · 3 pointsr/EDC
u/BelleStarrRoberts · 10 pointsr/Embroidery

:) Yueton Vintage European Style Plum Blossom Needlework Embroidery Scissors (Copper) https://www.amazon.com/dp/B01DG5JVA0/ref=cm_sw_r_cp_apip_4vOu6LA8IifYU

u/Saigala · 1 pointr/CrossStitch

There are DMC Marbleized Scissors. I got Spiderman/Ironman wibe from Golden Copper ones. But it might be just me.

Edit: What about something similar to these? They are quite cool looking.
https://www.amazon.com/PENTA-ANGEL-4-1inch-Scissors-Trimming/dp/B01J37Z2DK/ref=alp_dpwidget_a_m_?th=1&psc=1&smid=AHX0AUP7LCDT (sorry for formating, I am on phone)

u/camerawn · 387 pointsr/DesignPorn

I could've got karma for these scissors? Damn. I didn't think they were that special, they're like less than $10 at hobby lobby.

Amazon link

u/Tantric989 · 10 pointsr/BuyItForLife

This reminds me, I need to go figure out what scissors they gave me at work because as a lefty it's one that works fantastic, and that's probably one of the worst things you have to deal with as a lefty. More than half the scissors on the planet are totally useless for left-handed people. Especially the ones in grade school that would just crease paper if you used them in your left hand.

edit: Someone actually linked them lower in the comments. These are beautiful.

https://smile.amazon.com/Westcott-Titanium-Scissors-Straight-Handle-13901/dp/B000P0LNRE

u/sonofabullet · 8 pointsr/sysadmin

http://www.amazon.com/Kai-5210-8-inch-Dressmaking-Shears/dp/B004MN72VG

Kai brand shears, affordable and really really good. Source: Spent four years in textile industry, used nothing but these.

u/miasmic · 3 pointsr/history

Titanium scissors like these aren't actually titanium but steel with a thin surface coating of a titanium compound (probably titanium nitride).

Titanium metal scissors would go blunt very fast compared to a steel pair.

u/AllEncompassingThey · 1 pointr/retrobattlestations

I can see where you'd think that, but they're actually grey with an orange interior. Mostly grey.

https://www.amazon.com/Westcott-Titanium-Scissors-Straight-Handle-13901/dp/B000P0LNRE

10/10 scissors 100%

u/redfoxvapes · 1 pointr/CrossStitch

Hobby Lobby! However they're also on amazon and also on this site

u/Yokonzo · 2 pointsr/justneckbeardthings

Dammit I can only find those in black

u/OnyiMinx · 1 pointr/crochet

I found what looks to be the exact same design

Yueton Vintage European Style Plum Blossom Needlework Embroidery Scissors (Copper) https://www.amazon.com/dp/B01DG5JVA0/ref=cm_sw_r_cp_apa_i_XJ5.AbSFJHNJD

u/wickjest · 4 pointsr/gadgets

With these, I've made all my headphones wireless. Only $7.98 at the moment.

u/PixelatedSuit · 1 pointr/AmazonUnder5

I've never heard them called surgical scissors but I've always called them tramua sheers, and they're quite cheap

u/Weebus · 4 pointsr/Throwers

You need some new scissors. Recommended.

u/safe_kink_anon · 25 pointsr/gaybros

Hello.

A lot of things can go badly wrong with even basic bondage. For that reason, I really don't recommend learning it by trying it for yourself. The best way to learn bondage is to have it taught to you in person.

The good news is, bondage people are very open and usually offer workshops in any big city. If you go to one, expect to walk into a room full of people who you are in no way sexually attracted to, including some that are slightly sexually repulsive to you. But stay anyway. Keep your clothes on. Listen and learn.

In addition to safety, a workshop will teach you a few really fun knots, tell you the best kinds of rope and where to buy it, how to clean things afterwards, and all sorts of other useful tips.


If you ignore that advice-- which is really the best advice-- here are a few things to watch out for. It's three tips that will prevent you from injuring somebody.

  1. Cutting off circulation. Wrists are surprisingly easy to fuck up badly in a short amount of time. Fucked up wrists don't always hurt while they are getting damaged.

  2. Subs passing out. I have witnessed a healthy man tied up as a demo, just standing there, suddenly go weak and topple over. Fortunately, a bunch of us were standing around watching and kept him from hitting the ground. He came around and was fine. I've also had a young guy tied up as my sub when-- again, for no apparent reason-- he started to go into light shock... shivering and going weak. Again, I got him out of rope and as soon as he warmed up, he was fine. Something about even light bondage fucks with some people in significant ways.

  3. Obviously, don't get a rope near the side or front of the neck. It can put pressure on the carotid arteries.

    With respect to number one, beginners should not use rope on hands or wrists. Go to Mr. S. (reputable shop) and get a set of nice basic padded wrist restraints. They have tie-points on the outside of the restraint. A lot of beginners seem to think that restraints are for the hard-core people. But the reality is just the opposite: restraints are there for beginners to not fuck up.

    With respect to number two, never leave anyone tied up alone. Always be prepared with a set of EMT scissors. Note that these are sharp enough to cut rope, but the points are blunted so you can stick them between the rope and skin (eg: neck) without cutting. It's to get somebody out of rope if they pass out or if your knots go wrong and start to self-tighten.

    Always have an escape plan: for example, never clip a wrist restraint to a metal chain: tie it with rope instead so you can cut it if the sub passes out suddenly.

    Don't leave arms tied elevated for a long period in an early session. It causes a lot of stress to the body. Try it for ten minutes the first time, and if that goes well, try it for 20 minutes.

    Start slow. Try something briefly. see how the sub feels the next day. Try it again longer/harder if it works. Know what a safeword is. Don't jump right into rape play. Don't jump right into gags.

    That's sorta the first 10 minutes of a bondage talk. But really, go to one and get it for real.
u/briefbriefs · 5 pointsr/EDC

I see you're being recommended a lot of multitool options, but I've had a folding pair myself for 15 years (same kind my seamstress mom used) and they've yet to fail me... Slip-n-Snip