Reddit mentions: The best fishing rod holders

Yeah, that is what it is :) https://www.amazon.ca/gp/product/B000BDD83M/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Had my girlfriend sew a piece of fabric together to make the fit a bit tighter. It's removable so makes it easy to clean. As for the wand, I have it plugged into this timer( https://www.amazon.ca/gp/product/B0184CG9K0/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 ) so that I can have it turn on and then off for a little bit... over and over again. She found the magic wand a bit too strong so I also added an inline fan speed controler to lower the speed a bit ( https://www.amazon.ca/gp/product/B01MXQG4UZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 )

​

I think that'll be a great boat to get started with for calmer water. I mean, as long as it's safe for where you are kayaking, the boat you have is much better than the boat you don't! Plus you can probably sell it towards the purchase of a new boat down the line if you want. The only downside to that boat, is you'll only want to use it when the water is warmer, because since the seat sits pretty low you're more likely to get wet... not a huge deal, just something to consider.

Looks like you should be able to lash a milk crate down behind your seat, and once that's in place you can use zip ties to attach 2-3 sections of PVC to it for rod holders, or use one of these:

https://www.amazon.com/gp/product/B004XAK90O/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

I like this
It’s a great rod rack, strong, light, and easy to relocate. It also looks a lot nicer than a pvc diy.

How much do you want to spend?
Does he have a depth finder or sonar? These are on the lower end price wise for marcums.
My dad and i each got eachother 2 of these last X-mas. had a good laugh.

I bought two cheap 2 rod rod holders of Amazon, and I zip tied them at an angle to my crate. Works pretty good.

Sea Dog 325029-1 Two Pole Side Mount Rod Holder, Black https://www.amazon.com/dp/B006ZOWASK/ref=cm_sw_r_cp_api_i_5kBBDbW3573XH

Wow. Good eye. Fishing rod mount.

like the rear flush mount rod holders? these are fine just drill the hole where you want them and use cheap pop rivets to hold them in place. Angle them out slightly if you plan on trolling with them so that the lines are separated more. For rod holders in front I prefer RAM mounts over the scotty ones just because they are easier to adjust positioning on and stuff

maybe it's the current I fish in, but I don't see balancing my rod like that as any easier or less of a risk (of dropping it) than just grabbing it under my armpit or popping it into this gadget or the loop in my vest.

I used to hold my rod under my arm. I recently purchased a Smith rod holder to clip to my bag and love it.

Smith Creek Rod Clip, Wearable Fishing Rod Holder, Green https://www.amazon.com/dp/B00GM6I9BS/ref=cm_sw_r_cp_apa_.pnHzbER1D2XP

Looks like a modified fishing rod holder, most fishing rod holders mount flush but they are at a slight angle under the deck. From it's location in the transom, it would have not fit unless the bottom was cut off. This would have been deep enough to hold a grill pole like this one: http://www.amazon.com/Magma-Kettle-Grill-Power-Grip-Holder/dp/B0018Y6SXU/ref=sr_1_3?ie=UTF8&qid=1372350325&sr=8-3&keywords=magma+grill+mounts

As I look at the pictures you provided it looks like it was angled so that whatever was inserted hung out over the transom.

Just got it from the shipping company today. It’s the Vibe Sea Ghost 110. Looking for ideas for any accessories y’all may recommend. I have a few rod holders in my cart on (amazon)[https://www.amazon.com/dp/B004O0DR48/ref=cm_sw_r_cp_api_XbdTAb7KKQBZZ] but I can’t seem to find a cellphone mount that fits in the gear type holes. (Need one because I am trying the iBobber fish finder, also because tunes). I am also gonna find a milk crate and zip tie a few rod holders to it as well.
Any other ideas? Thoughts? Suggestions?

You can buy stick on Scotty or Railblaza mounts which can be glued to PVC boats. Then just add the cup holder accessory.

​

1. https://www.amazon.com/Scotty-341-BK-Glue-Inflatable-Boats/dp/B004O0BOCA
   
2. https://www.amazon.com/Scotty-241-BK-Mounting-Bracket-Black/dp/B001M4HT2A/
   
3. https://www.amazon.com/Scotty-Drink-Holder-Bulkhead-Gunnel/dp/B001M4HT8O
   
   ​
   
   If you are going to go for a low-end inflatable raft, however, I'd recommend that you consider the Mariner 4, instead.

Looks like this one.

Found this one for under $9.

Amarine-made Sure Grip Steel 20 Degree Angle Rod Holder (1Pcs) https://www.amazon.com/dp/B00JUTQ8IA/ref=cm_sw_r_cp_api_i_4MUBDbYKG4EJH

I bought a single rod holder for now, I usually take two rods so it does its job but I'll end up making a GoPro and multi rod holder out of pvc eventually. You can find a bunch of YouTube videos on how to make them fairly cheap too. Here's a link to the single rod holder I have.

https://www.amazon.com/Caddis-Sports-Inc-RH-Holder/dp/B005184RHI

I got this rod holder for my boat, it has a slot for a knife and a slot for a pair of pliars (or in my case an even bigger knife) https://www.amazon.com/SeaSense-Single-Piece-Holder-White/dp/B004XAK90O/ref=sr_1_4?s=hunting-fishing&ie=UTF8&qid=1474594585&sr=1-4&keywords=rod+holder

https://www.reddit.com/r/Fishing/comments/28tpzj/my_new_fishing_rig_makes_being_a_15_year_old/

https://www.amazon.com/Aosom-Wanderer-Bicycle-Luggage-Trailer/dp/B0083JHEG8

https://www.amazon.com/Shoreline-Marine-Holder-Single-Basic/dp/B009CDXXJQ/ref=redir_mobile_desktop?ie=UTF8&pi=AC_SX110_SY165_QL70&qid=1403488327&ref_=mp_s_a_1_26&sr=1-26

you can try an inexpensive fishing rod holder.

[fishing rod holder mount](Amarine Made Stainless Steel Slide Mount Removable Fishing Rod Holder https://www.amazon.com/dp/B00F6L96LW/ref=cm_sw_r_cp_api_i_cF3YDb8R2YD90)

Is this kind of what you're using?

Fishing rod clips