(Part 2) Reddit mentions: The best fishing rod & reel storage & accessories
We found 66 Reddit comments discussing the best fishing rod & reel storage & accessories. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 50 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Berkley Black Combo Rod Rack, Black
Stores 5 combos neatly and securelyCorrosion proofFoam grip pads
Specs:
Color | Black |
Height | 18.25196848532 Inches |
Length | 1.49999999847 Inches |
Number of items | 1 |
Release date | September 2011 |
Weight | 0.76 Pounds |
Width | 6.49999999337 Inches |
22. Scotty #279-BK Baitcaster/Spinning Rod Holder without Mount
Holds a baitcaster reel in a cushioned cradle; No mount includedA slot in the front of the rod holder allows for a spinning reel to be held securely in positionThe rod holder design has a side mounted flange, which leaves the bottom open, allowing the rod holder to accommodate trigger gripsPistol gr...
Specs:
Color | Black |
Height | 6.1 Inches |
Length | 2.7 Inches |
Number of items | 1 |
Release date | February 2011 |
Size | One Size |
Weight | 0.575 Pounds |
Width | 9.85 Inches |
23. Scotty Baitcaster/Spinning Rod Holder Black with 244 Flush Deck Mount, Small (0281-BK)
- Holds a baitcaster reel in a cushioned cradle and a slot at the front also allows for a spinning reel to be securely held in position
- Fully adjustable up and down and with 360 degrees of horizontal rotation
- Manufactured with fiber reinforced engineering grade nylon offering strength, resilience and reliability
- Includes Scotty 244 Flush Deck Mount which has a sealed base for watertight applications with splash cover
- Sport type: Fishing
- Included components: fishing-downriggers
Features:
Specs:
Color | Black |
Height | 2.9 Inches |
Length | 9.5 Inches |
Number of items | 1 |
Release date | October 2008 |
Size | Small |
Weight | 0.2 Pounds |
Width | 6.9 Inches |
24. Plano 4442 Fabric Rod Tube, Green, 42-Inch
Tested for durabilityMade in the USAMade using the highest quality componentsTough, water-resistant exterior fabricNylon carry handleDense, foam padded ends to protect rod tips3 inch diameter crush-resistant polypropylene core42''L x 3''W x 3''H
Specs:
Color | Green |
Height | 3 Inches |
Length | 42 Inches |
Number of items | 1 |
Size | 42" |
Weight | 1.4 Pounds |
Width | 3 Inches |
25. Berkley BAVRR Vertical Rod Rack, Black,6 Rod
Fishing rod rack safely stores up to 6 rodsFoam grip pads hold rods neatly and securelyKeeps expensive rods off the ground to prevent damageDurable yet lightweight plastic designCorrosion proof for long lasting useStores 6 rods neatly and securely<br>Foam grip pads
Specs:
Color | Black |
Height | 14.99999998 Inches |
Length | 5.251968499 Inches |
Number of items | 1 |
Release date | September 2011 |
Size | 6 Rod |
Weight | 0.53 Pounds |
Width | 1.251968503 Inches |
26. Sea Dog Line - 3004.613 Wall MNT Rod/Tool Holder 3 WHT
- Injection molded polypropylene
- UV Stabilized
- Installs with four #8 fasteners (only included in display packaging)
- Color: White
Features:
Specs:
Height | 17 Inches |
Length | 1.87 Inches |
Number of items | 1 |
Weight | 1 Pounds |
Width | 11.69 Inches |
27. Scotty #311-BK Cup Holder with Rod Holder Post and Bulkhead Black
- Drink Holder With Button Mount And Rod Holder Post Mount
- For Cans, Coffee Mugs And Insulated Sleeves
- Convenient Accessory Rack To Hang Lures And Tools
- Easily Removable
Features:
Specs:
Color | Black |
Height | 5 Inches |
Length | 7 Inches |
Number of items | 1 |
Release date | October 2008 |
Size | Standard |
Weight | 0.2 Pounds |
Width | 5 Inches |
28. Scotty #241-BK Side Deck Mounting Bracket (Black)
- Can be mounted on top or side of gunnel
- Works with all Scotty post mount rod holders
- Dimensions: 4" x 2" x 2"
- Bolting dimensions: 1 5/16" x 3 3/16"
- Made from fiber reinforced nylon
Features:
Specs:
Color | Black |
Height | 4 Inches |
Length | 2 Inches |
Number of items | 1 |
Release date | October 2008 |
Size | Small |
Weight | 0.1 Pounds |
Width | 2 Inches |
29. Amarine Made 20 Degree Sure Grip Steel Angle Rod Holder with Mounting Base (1Pcs)
Recommended for line weights over 25 lbs.metric M10x1.5 thread diameter plated steel stems are durable and strong1-3/4" wide for larger rod handles, Extended cradle is contoured to provide hand clearance for quick grabs,Holds the rod tip horizontally for straight-down fishing,V-shaped front offers r...
Specs:
Height | 1.1 Inches |
Length | 7 Inches |
Weight | 0.55 Pounds |
Width | 2.4 Inches |
30. Shakespeare 4187 SS Ratchet Mount
- Stainless Ratchet Mount w/ Handle
- 1" - 14 thread male
- 9/32" hole for cable pass through
- 5/16" dia. 3" x 1 1/2" on center bolt holes
- Includes mount only
- SHAKESPEARE ELECTRONICS 4187
- Four-way ratchet design with handle
- For deck or bulkhead mounting
Features:
Specs:
Color | Multi |
Height | 0.02755905509 Inches |
Length | 0.02755905509 Inches |
Number of items | 1 |
Release date | January 2011 |
Weight | 1 Pounds |
Width | 0.08267716527 Inches |
31. CANNON 1901200 Mini-Troll Manual Downrigger, Black
Horizontal reel/brake100' of stainless steel cableSwivel-head depth counter
Specs:
Color | Black |
Height | 5 Inches |
Length | 20 Inches |
Number of items | 1 |
Release date | December 2018 |
Size | Mini-Troll |
Weight | 1 Pounds |
Width | 12 Inches |
32. Orvis Sumo Car-top Rod Rack/Only Suction Cup
- FEATURES: Chassis: Plastic Drive: Four wheel belt driven, front universal dogbones, straight rear axle Motor: 180 size brushed ESC: EN-2 with reverse
- INCLUDES: RTR Micro RS4 On-Road Car, 2.4GH Radio, Battery, Charger, Motor, ESC, four AA Batteries, Instruction Manual, eight Wheels, four rubber slick
- INCLUDES: RTR Micro RS4 On-Road Car, 2.4GH Radio, Battery, Charger, Motor, ESC, four AA Batteries, Instruction Manual, eight Wheels, four rubber slick
Features:
33. Mayitr 20 Pcs Fishing Pole Rod Holder Clips Rubber Black
- Size: as the picture shown (The middle gap min/max:0.2-0.6 inch)
- Fishing pole clip color: Black
- Package Included: 20 x Fishing Rod Clips (not include the screws)
- Rod rack holder each clip is easily mounted with 2 stainless steel screws (not included)
- These clips are 16mm inside diameter, there are two small holes in the inside center where the mounting screw goes into and screws into your fishing rod rack.
Features:
Specs:
Color | Black |
Weight | 0.24 Pounds |
34. Goture Pisfun Stainless Steel Clamp-On Fishing Rod Holder for Rails 3/4’’ to 1’’ (for Rails 3/4’’ to 1’’)
- Clamp on Fishing Rod Easily: 360°rotation design, makes it easy to lock in any angle. Can be easy to clamp on your pipe and tube in seconds. This rod holder allows you to free your hands and keep your rod in the right place where you put it.
- Protect Your Fishing Rod: With protective black plastic inner, the rod holder will prevent your fishing rod from scratching. Polished stainless steel rod holders for superior durability and reliability. Whether you're a beginner or an experienced angler, you can keep your rods safe and secure with this rod holder.
- No Drilling Required: Our clamp-on rod holder allows anglers expand fishing range without drilling extra rod holder gunnel. With this pole holder, your boat look just like the original.
- Keep Your Rod Clean: Designed with drain holes in bottom, it keep your rod clean and dry all the time. It brings you a great fishing experience!
- Easy to Use : Easy to install. These rod holders are easily mount on both horizontal and vertical rails from 3/4 inch to 1 inch in diameter.
Features:
Specs:
Color | For Rails 3/4’’ to 1’’(1PCS) |
Size | For Rails 3/4’’ to 1’’(1PCS) |
Weight | 1.7 Pounds |
35. Amarine Made Stainless Steel Slide Mount Removable Fishing Rod Holder
- Mirror finished stainless steel construction, for sleek appearance and to suit today's modern watercraft,Stainless stopper pin built into the base of the rod holder to located the rod butt into position
- Vertical mount removable rod holder can easily be removed when not in use,8mm diameter drain hole at base of rod holder to drain any captured water
- Rod holder protrudes at a 30 degree angle when mounted
- When rod holder is removed, only the low profile mounting bracket will remain mounted, Ideal for small tinnies when space is limited, or boats that aren't constantly used for fishing
- Easy to install, mounting bracket requires 4 countersunk screws (screws not included), Rubber insert to protect your fishing rod from any wear against the stainless surface
Features:
Specs:
Height | 3.543307083 Inches |
Length | 14.173228332 Inches |
Weight | 1.81 Pounds |
Width | 3.93700787 Inches |
36. Rack'Em 7009 Overhead 12-Rod Fishing Rod Rack
- Organize your rod collection - protect from damage & increase accessibility
- For Indoor/Outdoor Use - not affected by sun or salt
- Mount in garage, basement, boat, boat house, camp or cabin
- Holds all fishing rod shapes, sizes & styles
- Heavy-duty steel construction, 28"L x Adjustable Width x 4"H
- Included components: fishing rods racks, mounting hardware
Features:
Specs:
Color | 12-Pole Overhead Fishing Rod Rack |
Height | 1 Inches |
Length | 5.25 Inches |
Number of items | 1 |
Size | Pack of 1 |
Weight | 2 Pounds |
Width | 28 Inches |
37. Shoreline Marine High Impact Plastic Single SL91357 Rod Holder UV Stabilizers
Single Rod HolderIncludes Stainless Steel HardwareUV InhibitorsMolded In Mounting Feet
Specs:
Height | 2 Inches |
Length | 12 Inches |
Weight | 0.02 Pounds |
Width | 2.5 Inches |
38. Caddis Rod Holder RH
- Crafted From The Highest Quality Material
- Perfect For Outdoor And Even Indoor Use
- Made In United States
- Material Name:Synthetic
Features:
Specs:
Color | Black |
Height | 8 Inches |
Length | 4 Inches |
Number of items | 1 |
Release date | February 2011 |
Weight | 0.6 Pounds |
Width | 3 Inches |
39. Berkley Spiral Rod Holder
Country Of Origin : ChinaThe Package Height Of The Product Is 1 InchesThe Package Length Of The Product Is 1 InchesThe Package Width Of The Product Is 1 Inches
Specs:
Color | Multi |
Height | 1.3 Inches |
Length | 12.1 Inches |
Number of items | 1 |
Release date | October 2011 |
Size | One Size |
Weight | 0.4 Pounds |
Width | 1.3 Inches |
40. Etna Fishing Rod Case Organizer,48.5" x 13.5"
Khaki Green- A greenish khaki color with black trim.The carry case holds 5 rods and reels on the outside, plus more rods, reels, tackle and equipment on the inside.Ships Flat-Expands to 48 inches high and 8 inches in diameter.Heavy duty grade high-tech polyester.Adjustable shoulder strap.
Specs:
Color | Khaki Green |
Height | 2 Inches |
Length | 14 Inches |
Number of items | 1 |
Size | Non Expandable |
Weight | 1.4109584768 Pounds |
Width | 10.25 Inches |
🎓 Reddit experts on fishing rod & reel storage & accessories
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where fishing rod & reel storage & accessories are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I would recommend this one so the rod can't slip when driving.
This is the one I got. The one on top has no foam, despite what the picture looks like. The rod end with the reel can sometimes slip out if I take corners too fast with my car.
Just got it from the shipping company today. It’s the Vibe Sea Ghost 110. Looking for ideas for any accessories y’all may recommend. I have a few rod holders in my cart on (amazon)[https://www.amazon.com/dp/B004O0DR48/ref=cm_sw_r_cp_api_XbdTAb7KKQBZZ] but I can’t seem to find a cellphone mount that fits in the gear type holes. (Need one because I am trying the iBobber fish finder, also because tunes). I am also gonna find a milk crate and zip tie a few rod holders to it as well.
Any other ideas? Thoughts? Suggestions?
are you talking about a flush mount like this?
or one of these?
Maybe a stupid suggestion, but would a fishing rod bag work?
&#x200B;
something like this
https://www.amazon.ca/Plano-4442-Fabric-Green-42-Inch/dp/B009YSFW8Y/ref=sr_1_17?crid=LZ1J6XCHGO7S&keywords=fishing+rod+case&qid=1568749180&sprefix=fishing+rod+%2Caps%2C235&sr=8-17
You can buy stick on Scotty or Railblaza mounts which can be glued to PVC boats. Then just add the cup holder accessory.
&#x200B;
&#x200B;
If you are going to go for a low-end inflatable raft, however, I'd recommend that you consider the Mariner 4, instead.
Part of a two-part fishing rod rack. The butt end goes into that, and there should be a second part with grips that you push the rod into.
Usually it is mounted horizontal so the rods sit in them vertically.
Like this.
Looks like this one.
Found this one for under $9.
Amarine-made Sure Grip Steel 20 Degree Angle Rod Holder (1Pcs) https://www.amazon.com/dp/B00JUTQ8IA/ref=cm_sw_r_cp_api_i_4MUBDbYKG4EJH
I got this wifi extender. It claims a range of up to 5 miles (offshore, on a boat, over clear waters). I've seen it get a network at least several blocks away in town with obstructions. Using it from my house, I see about 50 networks as opposed to my normal 2-3.
This antenna mount allows you to lower the antenna so it doesn't stick straight up when you aren't using it.
Also consider using a 4G hotspot with a 4G signal booster like a weBoost.
Change your link to this
http://www.amazon.com/Cannon-1901200-Mini-Troll-Manual-Downrigger/dp/B000MMVW1C
Reddit tends to auto-remove posts with amazon links
The one mounted on the hood is a Sumo - https://www.amazon.com/Orvis-Sumo-Car-top-Rack-Suction/dp/B004L9QCN0
The one on top is a Thule, but I don't think they make them anymore, so maybe eBay - https://www.amazon.com/Thule-885-Fishing-Mount-Carrier/dp/B000AMBP0M
I bought a single rod holder for now, I usually take two rods so it does its job but I'll end up making a GoPro and multi rod holder out of pvc eventually. You can find a bunch of YouTube videos on how to make them fairly cheap too. Here's a link to the single rod holder I have.
https://www.amazon.com/Caddis-Sports-Inc-RH-Holder/dp/B005184RHI
https://www.reddit.com/r/Fishing/comments/28tpzj/my_new_fishing_rig_makes_being_a_15_year_old/
https://www.amazon.com/Aosom-Wanderer-Bicycle-Luggage-Trailer/dp/B0083JHEG8
https://www.amazon.com/Shoreline-Marine-Holder-Single-Basic/dp/B009CDXXJQ/ref=redir_mobile_desktop?ie=UTF8&amp;pi=AC_SX110_SY165_QL70&amp;qid=1403488327&amp;ref_=mp_s_a_1_26&amp;sr=1-26
you can try an inexpensive fishing rod holder.
I use this guy on the ceiling of my garage, holds 12 rods https://www.amazon.com/RackEm-7009-Overhead-12-Rod-Fishing/dp/B00A16NQTU/ They also have a wall mount variant that holds 6 rods.
[fishing rod holder mount](Amarine Made Stainless Steel Slide Mount Removable Fishing Rod Holder https://www.amazon.com/dp/B00F6L96LW/ref=cm_sw_r_cp_api_i_cF3YDb8R2YD90)
hmmm, maybe this:
http://www.amazon.com/Uniques-Shop-Fishing-Case-Organizer/dp/B002OFJ578/ref=sr_1_1?s=hunting-fishing&amp;ie=UTF8&amp;qid=1411919816&amp;sr=1-1
Stainless steel clamp holder for a fishing rod
Is this kind of what you're using?
Fishing rod clips