Reddit mentions: The best garage wall guards
We found 5 Reddit comments discussing the best garage wall guards. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 3 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Ampulla Garage Smith GWP03S Multilayer Garage Wall Protector Car Door Protectors (4-Pack)
- Excellent Multilayer Protection β Each strip size is 400mm x 150mm x 23mm. The 23mm nitrile rubber plus 3mm High-End sponge padding provide perfect impact absorption up to 441lb or 200kg, preventing damage from any potential impacts when parking in the garage.
- Unique Nitrile Rubber Material β Excellent impact absorption and soft touch on the surface are provided by unique nitrile rubber. Nitrile rubber is odorless and environmentally friendly material commonly used in the medical industry.
- Cuttable & Flexible β Each strip can be cut into multi pieces or different shapes. Perfect flexibility and softness provided by its just right thickness allow the wall protectors to be applied on 90-degree walls, curved surfaces, or cylinder columns.
- Fiberglass Mesh Adhesive Structure β The adhesive force is reinforced by its unique integrated back adhesive structure. The interlaced fiberglass allows the wall protectors to be removed without tearing the soft protector or leaving marks on the wall. The non-tearing self-adhesive cover can be peeled off easily.
- What you will get β Garage Smith GWP03S Car Door Protector x 4, 1-day response customer service, and technical support.
Features:
Specs:
Size | Pack-4 |
2. Garage Wall Protector, 4 Pack Garage Car Door Protector Bumper Guard for Car Doors Anti-Collision Waterproof Inflaming Ultra Self Adhesive EVA Foam for Warehouse Parking Assist(1.18x3.93x11.8 inches)
- π Feature: The car door protector strips can against fire and water, it is resistant to abrasion, oil, and superior heat preservation, effectively guard your car against bumps and scratches damaging your vehicle's door, bumper, bodywork, and other places.
- π Ultra Thickness: Compare to other brand product, our protector strips is 1.18-inch thickness, the service life of up to 5 years, can be better to provide full protection for your car, prevent damage caused by any moderate impacts.
- π Premium Quality: Made of Eco-friendly high-quality EVA Foam with strong adhesion tape backing, durable and easy to clean, easier installation on almost all smooth surfaces including plaster, wood, metal, concrete, etc.
- π¨ Easy Installation: Just need to peel off the backing paper and stick it on the wall, 4 pcs guard strips are better for left and right side of the car, guard your car against bumps and scratches, it is suitable for DIY to multi shapes or size.
- π‘ Widely Use: This garage wall anti-scratch strip is perfectly used in parking spaces, warehouse, mechanical insulation, pipe insulation, vehicle collision avoidance. And removed without tearing the soft protector or leaving marks on the wall.
Features:
Specs:
Size | Normal Size: 11-13/16" x 3-29/32" x 1-1/4" |
3. Ampulla GWP01 Ultra Thick Waterproof Garage Wall Protector, Designed in Germany - Pack of Two (1/4" Thickness)
- β Best Protection by DOUBLE Thickness - 1/4" thickness surface provides heavy protection for your car door and garage wall to prevent damage caused by any heavy impacts. It is greater or equal to twice the thickness of other brand of garage wall protectors.
- β Top Grade & Eco-Friendly Material - The protectors with scratch prevention diamond texture on the waterproof surface are made of odorless high-density material, which has RoHS authentication. It is totally environment-friendly material. Let us go Green!!
- β Full Protection & Suitable for Types of Walls - Scratch prevention soft foam strip for garages. Each strip size is 79"x 8"x 1/4". And also the strip can be cut into multi pieces or different shapes, which fits for any types of walls.
- β Exquisite Surface Design - Details make all the difference. This garage car door protector has been applied with the most exquisite design in the world. Any water drop or water flushing be protected by special textures and grooves. It is also very easy to be cleaned.
- β Double Protection by Dual Strip Pack - A set of two garage wall strip ensures both sides of car doors and garage walls will be fully protected.
Features:
Specs:
Height | 13 Centimeters |
Length | 30.2 Centimeters |
Size | 1/4" Thickness |
Weight | 0.44 Pounds |
Width | 24.3 Centimeters |
π Reddit experts on garage wall guards
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where garage wall guards are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
There may very well be better options, but my wife got these awhile ago for our garage and we had some extra lying around, so I tried sticking them on my ninebot S1.
They work great! They're super comfortable as pads for the legs and ankles, AND they're so big and cushy and sticky that they make good bumpers for the rest of the body. I even ripped some off as an experiment, and not only did it leave no residue, but it RESTUCK just as well the second time in a new spot.
EDIT: Also, as I recall the V10 has very high pedals. I started learning yesterday and my tire was mostly flat, and it was still hard to figure out how to get a good unsupported mount, but today after inflating my tire properly, which raised the pedals by like 2", it was like starting all over again.
I guess I just wanted to let you know: you're not crazy, learning this is hard, probably even harder for you because of your wheel, but you can do it and when you do you'll love that you have that V10.
Thanks everyone. Yeah, it does suck.
I have full comprehensive insurance on it so I might file a claim and take it to the shop at some point.
Otherwise it's in perfect shape.
What I think happened was someone backed into it, and the chain was taut enough that there wasn't any leeway β¦ and so instead of just sort of pushing it out of the way, the scooter "held it's ground" and so he pushed into it and caused a dent. A slow and steady push rather than a violent impact, maybe.
Anyway, I'm getting a new cover that has a bight orange stripe on top so that may make it more visible.
I also McGyvere'd some side protectionβ¦ I had some left over rubber strips, and I bought a set of these. I'm gunna sort of drape them over the sides of the scoot when it's parked. Who knows βΒ might actually work!
This. Very happy with it. Very sticky, so be careful when applying. Doesn't look fantastic to have a black strip down my garage wall, but I'd rather this than dinging my doors.
https://www.amazon.com/Ampulla-Resistance-Protector-Designed-Germany/dp/B071HFTRCH/
Link: https://www.amazon.com/gp/aw/d/B071HFTRCH?psc=1&ref=ppx_pop_mob_b_asin_title
I sadly donβt have any of the AP features on either of the MSs so I canβt say.
Or just get one of these and put up and stop whining about it:
Ampulla GWP01 Ultra Thick Water Resistance Garage Wall Protector, Designed in Germany - Pack of Two (1/4" Thickness) https://www.amazon.com/dp/B071HFTRCH/ref=cm_sw_r_cp_tai_NVKxCbFDK8136