Reddit mentions: The best hollow-wall anchors
We found 36 Reddit comments discussing the best hollow-wall anchors. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 18 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. TOGGLER SnapSkru SPM Mini Self-Drilling Drywall Anchor with Screws, Glass-Filled Nylon, Made in US, For #6 to #8 Fastener Sizes (Pack of 6)
- Self-drilling anchor installs into drywall ceilings and walls without requiring a predrilled hole
- Glass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is inserted
- Made in USA, and includes #6 x 1-1/4" screws
- Ultimate tensile strength is 65 lb. in 1/2" drywall with a #6 x 1-1/4" screw
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Features:
Specs:
Color | Whites |
Height | 0.4 Inches |
Length | 6.8 Inches |
Weight | 0.08 Pounds |
Width | 4 Inches |
Number of items | 6 |
2. Qualihome Drywall and Hollow-Wall Anchor Assortment Kit, Anchors, Screws, Wall Anchor Hooks, and Hollow-Door Toggle Anchor
The ribs on the plastic anchors prevent the anchor from turning in the hole during installationHollow-door anchor provides a firm hold from within hollow-core doors and thin panelsFor light to medium support in Drywall & Masonry. Comes in a handy Plastic organizer case with size compartments for eas...
Specs:
Weight | 0.45 Pounds |
3. NYLON CAVITY WALL ANCHOR FIXING WITH SCREW M6 X 35MM ( pack of 30 )
expanding wall plugrawl plugframe anchor
Specs:
Weight | 0.15 Pounds |
4. The Hillman Group 370329 Ribbed Plastic Anchor, 8-10-12 X 1-1/4-Inch, Blue, 100-Pack
- For use in concrete, brick, hollow block, drywall and plaster
- Works well in hard surfaces where no studs or beams are behind the surface
- Comes in a variety of colors
- Easy installation
- Pre-drilling is required; Screws not included. 100 pieces per retail package
Features:
Specs:
Color | Blue |
Height | 3.1 Inches |
Length | 1.9 Inches |
Weight | 0.25 Pounds |
Width | 3.1 Inches |
Size | #8-10-12 x 1-1/4" |
Number of items | 1 |
5. The Hillman Group 370326 Ribbed Plastic Anchor, 4-6-8 X 7/8-Inch, Yellow, 100-Pack
- For use in concrete, brick, hollow block, drywall and plaster
- Works well in hard surfaces where no studs or beams are behind the surface
- Comes in a variety of colors
- Easy installation
- Pre-drilling is required; screws not included
- 100 pieces per retail package
Features:
Specs:
Color | Yellow |
Height | 2.8 Inches |
Length | 1.7 Inches |
Weight | 0.04 pounds |
Width | 2.3 Inches |
Size | #4-6-8 x 7/8" |
Number of items | 1 |
6. Topzone Heavy Duty 1/8" inch 38mm Zinc Plated Steel Hollow Drive Wall Anchor w/ Screws (24)
- Hollow wall drive anchors do not require pre-drilling - drive into walls in seconds
- Zinc Plated Steel
- 1/8" Diameter
- 38mm Length
- For 1/2" inch wall thickness
Features:
Specs:
Size | 1/8" inch |
7. TOGGLER SnapSkru SPM Mini Self-Drilling Drywall Anchor with Screws, Glass-Filled Nylon, Made in US, For #6 to #8 Fastener Sizes (Pack of 50)
Self-drilling anchor installs into 3/8"- to 5/8"-thick drywall ceilings and walls without requiring a predrilled holeGlass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is insertedMade in USA, and includes #6 x 1-1/4" screwsUltimate tensile s...
Specs:
Height | 2.7 Inches |
Length | 5.1 Inches |
Weight | 0.45 Pounds |
Width | 2.9 Inches |
Number of items | 50 |
8. TOGGLER Toggle TC Commercial Drywall Anchor with Screws, Polypropylene, Made in US, 5/8" to 3/4" Grip Range, For #6 to #14 Fastener Sizes (Pack of 20)
- Commercial drywall anchor provides a firm hold from within 5/8"- to 3/4"-thick drywall
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
- Made in USA, and includes #8 x 1-3/4" screws
- Ultimate tensile strength is 159 lb. in 5/8" drywall with a #8 x 1-3/4" screw
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Features:
Specs:
Color | Clear |
Height | 9.5 Inches |
Length | 1.2 Inches |
Width | 3.75 Inches |
Number of items | 20 |
9. TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 10)
- Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
- Made in USA, and includes 1/4"-20 UNC-threaded bolts
- Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Features:
Specs:
Color | Clear |
Height | 10 Inches |
Length | 2 Inches |
Weight | 0.7 Pounds |
Width | 4 Inches |
Number of items | 10 |
10. Anndason Heavy Duty Metal Setting Tool For Hollow Wall Metal Cavity Anchor Plasterboard Fixing
Size: Approx. 16.3cm x 12cm x 2.7cm/ 6.42" x4.7" x 1.06"The setting tool is designed to make easy work of expanding the hollow wall plugs once they are in place.Metal with non-slip rubber grips and slip guard.For setting cavity wall fixings into hollow stud walls accurately and quickly.Place Anchor ...
11. WallClaw Anchors SDWH19400DB-RC12 50Pk
- Item Weight: 0.4 lb
- Country of Origin: United States
- Brand name: WallClaw Anchors
- Item Dimensions: 2.0"L x 0.6"W x 0.2"H
Features:
Specs:
Height | 0.2 Inches |
Length | 2 Inches |
Weight | 0.35 Pounds |
Width | 0.6 Inches |
Size | Pack of 1 |
Number of items | 50 |
12. 200 lbs Drywall Anchor Mounting Kit for Wall Mounting Without Studs or Through Metal/Steel Studs to Mount TVs, Grab Bar, Etc. Includes:1/2" Drill Bit, 4 X togglebolts, 4 X Screws+Washers
METAL/STEEL STUD WALL MOUNTING KIT. Complete mounting kit to facilitate secure & easy installation of TVs/etc through metal/steel studs or just 1/2" drywall. Metal studs are common in condos, apartments and office/commercial buildingsSTUD NOT REQUIRED. Ultimate tensile pull out strength 200 lbs on 1...
13. Qualihome Anchor Assortment Kit | Anchors, Molly Bolts, Screws, Toggle Bolts, Wings for Drywall, Hollow Wall, Plaster, Tile | Heavy Duty Masonry Set
NUTS & BOLTS: Qualihome Anchor Kit meets all your mounting needs when fastening objects to drywall, hollow wall, plaster, and tile, where using ordinary fasteners just won’t do. This assortment set includes plastic ribbed anchors, pan head sheet metal screws, toggle bolt screws, wings, and hollow ...
Specs:
Weight | 0.7 Pounds |
14. TOGGLER SnapSkru SPM Mini Self-Drilling Drywall Anchor with Screws, Glass-Filled Nylon, Made in US, For #6 to #8 Fastener Sizes (Pack of 25)
- Self-drilling anchor installs into 3/8"- to 5/8"-thick drywall ceilings and walls without requiring a predrilled hole
- Glass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is inserted
- Made in USA, and includes #6 x 1-1/4" screws
- Ultimate tensile strength is 65 lb. in 1/2" drywall with a #6 x 1-1/4" screw
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Features:
Specs:
Color | Whites |
Height | 0.6 Inches |
Length | 9.5 Inches |
Weight | 0.2 Pounds |
Width | 3.8 Inches |
Number of items | 25 |
15. Oxford Anchor 10 - High Security Ground & Wall Anchor for Bike Locks
Sold secure silver ratingAttack tested, hardened steel bolt-down anchor for floors and wallsFits all Oxford chains and cable locksAll fixings supplied and free Allen keyBolts protected by ball bearing and then covered when a lock is being used
Specs:
Height | 2.28 Inches |
Length | 5.12 Inches |
Weight | 1.10231131 Pounds |
Width | 4.09 Inches |
16. Glarks 42Pcs 6 Size Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Drywall, Plaster and Tile
- ★【Product Type】: High quality heavy duty molly bolt drive hollow drive wall anchor screws kit.
- ★【Package】: In this kit, it include 6 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm total 42pcs packed in a durable plastic box, convenient for your use and storage.
- ★【Material】: They are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, strong and durable enough for you to hanging items.
- ★【Feature】: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety.
- ★【Application】: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches.
Features:
Specs:
Size | 6 size anchor |
17. HELIFOUNER Hollow Wall Anchor Screws Set, 6 Sizes Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Drywall, Plaster and Tile, 48 PCS
【Sizes】There are 6 sizes selected for you, includes: 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm. 48 pieces in total. Different sizes and enough quantities can meet your different longtime using.【Material】Our molly bolts are made of zinc plated steel, uniform coating, strong adhesion and ...
18. Drywall and Hollow-wall Anchor Assortment Kit, Screws, Wall Anchors, 100 Pack
- Most Useful Household Sizes to Meet Most Useful Repair Needs
- The ribs on the plastic anchors prevent the anchor from turning in the hole during installation
- Comes in a handy Plastic organizer case with size compartments for easy storage
- Set Includes A variety of tapping screws and wall anchors
- 25PC - 6 x 1” Screws, 15PC - 8 x 1” Screws, 2PC- 12 x 1-1/2” Screws, 25PC - E5 Wall Anchors, 8PC -10 x 1-1/4” Screws, 2PC - E10 Wall Anchors, 15PC - E6 Wall Anchors, 8PC - E8 Wall Anchors
Features:
🎓 Reddit experts on hollow-wall anchors
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where hollow-wall anchors are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Thanks for the reply! Using a studpop to locate studs.
So I can't screw anchors into that metal drywall corner correct?
And you're saying I can use toggle bolts wherever on the wall even if there isn't a stud? That's awesome. The shades are a bit heavy but I'm not going to be putting my weight on them. So if I can just put those anchors in anywhere I'd be pretty satisfied with that as a solution. Also as a sidenote, I also ordered this. There's nothing in here that can freely support the curtains and curtain rod right?
Your wall will be fine (regarding the structural integrity of your house). But will it be strong enough to old your TV? I don't have enough information. If I understand correctly, with the information you provided us, i'm pretty sure your wall isn't only concrete, this type of wall is usually made with wood, metallic meshing with a poor quality concrete.
How thick the wall is?
Something like this should be a good start to check for screws.
http://www.amazon.co.uk/NYLON-CAVITY-ANCHOR-FIXING-SCREW/dp/B006ZLL4VC/ref=sr_1_66?ie=UTF8&qid=1348165664&sr=8-66
You are using a hammer drill and are unable to penetrate the concrete? Maybe try starting at a smaller size (like 1/4") and working your way up.
Or maybe there is something wrong with your hammer drill? It sounds stupid, but make sure the hammer motion is on and you are drilling in the right direction.
The other option which should be fine, although it would be better to anchor in the concrete: Just use the plastic drywall anchors, like these guys:
http://www.amazon.com/Hillman-Group-370329-Plastic-100-Pack/dp/B000BO6NY2/ref=sr_1_22?ie=UTF8&qid=1415889643&sr=8-22&keywords=drywall+anchors
It sounds like you have about an inch and one eighth before you hit concrete. You may need to snip off a tiny bit to get them to go all the way in.
Yes, it comes with everything you'd need, but if you're going into drywall, I would suggest buying some better anchors like these, the ones they come with aren't the best.
If you plan one making it mobile, maybe look into some tripod mounts, the bases support a standard mount.
Yep, I agree with this. It's a .22, about as low pressure a round as you can find. Make sure it's not obstructed, nothing is obviously damaged, and that it isn't rusted to shit. Clean it, oil it, go shoot it.
Also you probably don't want to dry fire this gun, older rimfires like this will peen the breech face. These drywall anchors (the yellow ones you can find anywhere) work great as snap caps though.
A half inch hole seems a bit excessive for a 15lb mirror. The anchor you linked is like for hanging utility shelving. It will work, but it's pretty overkill.
For smaller stuff like this, I tend to use these sorts of anchors.
Use better drywall anchors. I had a similar thing happen with a curtain rod, and replaced the little straight nylon wall anchors with self-drilling wall anchors. The big screw threads are a lot better than tiny ridges on regular drywall anchors. I used these to secure a coat rack in my laundry room and it's been trouble free for over 4 years.
You don't really need to find studs for mounting the lighthouses, although that is the simplest installation. Since the lighthouses are fairly light, drywall anchors similar to these will be more than strong enough to hold them if the ideal location doesn't happen to be near a stud.
Howdy, new /r/HappyBuckmarkOwners member!
Some Buckmark pointers:
If you're feeling adventurous:
Just make sure you screw into studs next time, or use properly rated drywall anchors.
https://www.amazon.com/TOGGLER-SnapSkru-Self-Drilling-Glass-Filled-Fastener/dp/B0051IB6HW
Disclaimer: I work for the company that makes those, they are really awesome though.
I'm a huge fan of the Toggler brand anchors when I can't screw into a stud. You can find them at Home Depot as well.
http://www.amazon.com/gp/aw/d/B0051IBDKW/ref=pd_aw_sim_328_2?ie=UTF8&dpID=411M9VM3Z7L&dpSrc=sims&preST=_AC_UL100_SR100%2C100_&refRID=0FRF2AFFC415N447ZJGT
These are my favorite kind of snap toggles I've used so far: https://www.amazon.com/gp/product/B0051IBDKW/
Yes generally you shouldn't use a drill for it because it is so easy to overtighten. As I said I bought a tool for it, similar to this one:
https://www.amazon.com/Anndason-Setting-Hollow-Cavity-Plasterboard/dp/B0711S75N9
(just first google result)
but even with that tool you first have to do a testrun and see how hard you should pull on the handle. It is a bit fidgety but quite strong when done correctly.
Cake day!
These have been my favorite for a long time. Some Azome buyers have had a bad experience, but I would go to a regular branded hardware store and be sure you aren't getting a cheap knock off.
I like these anchors for hanging on hollow wall.
200 lbs Drywall Anchor Mounting Kit for Wall Mounting Without Studs or Through Metal/Steel Studs to Mount TVs, Grab Bar, Etc. Includes:1/2" Drill Bit, 4 X 200lbs SNAPTOGGLE Anchors, 4 Screws+Washers https://www.amazon.com/dp/B07P3L966N/ref=cm_sw_r_cp_tai_rhnSDbZTKKRV6
Follow the directions about what size drill bit. You won’t need masonry bit for plaster.
if you cant find studs, look into using these.
https://www.amazon.com/TOGGLER-SnapSkru-Self-Drilling-Glass-Filled-Fastener/dp/B0051IB6HW/ref=sr_1_15?ie=UTF8&qid=1468292016&sr=8-15&keywords=wall+anchor
I once had my Super Star Destroyer and an older X-wing and Tie on there.
For the size you describe (1lb) small universal wall anchors will be fine. Just the small push-in plastic anchor with matching screw. Leave the masonry bit up to the buyer. Something like the yellow ones in this kit:
Qualihome Drywall and Hollow-wall Anchor Assortment Kit, Anchors, Molly Bolts, Screws, and Toggle Bolts, 100 Piece. https://www.amazon.com/dp/B012Q2OBGI/ref=cm_sw_r_cp_tai_7sngybM7FY7Y1
OO toggle bolts :O i havent seen these before. Looks a lot less intrusive than what i was thinking of using... http://www.amazon.com/TOGGLER-SnapSkru-Self-Drilling-Glass-Filled-Fastener/dp/B0051IB6OA/ref=sr_1_3?ie=UTF8&qid=1398428057&sr=8-3&keywords=drywall+anchor
Here is the mobile version of your link
$6.56 for a pack of 100 :D
https://www.amazon.com/Hillman-370326-Ribbed-Plastic-100-Pack/dp/B000H5WVCS
DONE!
My wife recently got an ebike so both for ease of charging and security and I made her a lean to bike shelter. So now her bike is secured by a deadbolted door (albeit a pretty lightweight one) and and locked to the wall of the house with a wall anchor with her u-lock.
The store you link to would protect your bike from the weather but all that well from thieves. I doubt it would be much of a challenge to for the doors of that shelter. But if you cut a hole in the rear wall or floor so that you could fix a ground or wall anchor it should provide about as much protection as can be had in a lightweight outbuilding.
The plastic anchor will not work with plaster walls.
For that picture, I would attach a wire between the two hangers on the back of the frame, so you only need one hook in the wall.
You can use a molly bolt or toggle bolt if you are really worried about the weight.
This style anchor works wonders for hanging heavy shit in drywall. One will support the mirror, two will idiot proof it.
https://www.amazon.com/TOGGLER-SNAPTOGGLE-Zinc-Plated-Channel-Fastener/dp/B0051IBDKW/ref=pd_sim_60_5?_encoding=UTF8&pd_rd_i=B0051IBDKW&pd_rd_r=5R9HHHZNZADDRNMBB44B&pd_rd_w=fAiNu&pd_rd_wg=C3sSs&psc=1&refRID=5R9HHHZNZADDRNMBB44B
You drill a hole, stick the metal base into the wall, and pull a plastic tab tight to the wall. Then cut the plastic wings, and you have a reusable threaded piece of metal permanently hanging on the wall. When you move the mirror and want to patch it, hit it with a screwdriver and a hammer and it will fall into the wall cleanly.
It's nice because you can take the hardware out as much as you need and the anchor will remain in place and reusable.
These should be more than enough Hollow Wall Anchor Screws Set, 6 Sizes Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Drywall, Plaster and Tile, 48 PCS https://www.amazon.com/dp/B07HN4DQNF/ref=cm_sw_r_cp_apa_i_zuNpDbR2PYKBX
A couple drawwall insets. No need t anything fancy. Drywall and Hollow-wall Anchor Assortment Kit, Screws, Wall Anchors, 100 Pack https://www.amazon.com/dp/B01DCQRAZQ/ref=cm_sw_r_cp_api_i_QoFaBbBQS0W4E
If you hit homedepot they’ll have a little pack.
No worries if they are metal studs. Just find the center of the stud and go through it with a step bit, pop in some toggle bolts and secure the bracket to the wall with the provided screws
If you want something snapcap-like to stick in the chamber of a .22LR so you can dry-fire without hurting the firing pin or chamber, get a box of 4-6-8 X 7/8-Inch Plastic Screw Anchors.
It takes the same 10s of shots to ruin the rim on them as "real" .22 snapcaps that cost an order of magnitude more, it's soft enough that even if you really fuck up nothing will get hurt, and they'll usually even feed from a magazine.
I haven’t done it, but some people apparently put these in their gun to act as snap caps when dry firing.
The Hillman Group 370326 Ribbed Plastic Screw Anchor, 4-6-8 X 7/8-Inch, Yellow, 100-Pack.
The advantage to using these would be that The majority (all?) of “real” 22LR snap caps will eventually get dented from Firing pin strikes to the point that they are no longer serving the intended purpose. These screw anchors are disposable, so you just toss them when the rim becomes dented from your firing pin.