(Part 3) Reddit mentions: The best license plate covers & frames

Oh jeeze oh jeeze! My boyfriend just bought his first car (we live together).

He needs a license plate frame (this one doesn't have prime but is awesome, this one does and is pretty) and car mats...but car mats are too expensive so I won't link any :P

I'm unfamiliar with GPS/Tablet holders, but I can look into it. Is it 7" vertically? What are its full dimensions?

Yep, great suggestion if you want to run a front plate. I've heard you should add one of these as well to stiffen up the plate so it doesn't bend.
https://www.amazon.com/LFPartS-Stainless-backing-Reinforce-license/dp/B0764LQJSZ/

http://www.amazon.com/GTR-Red-Start-Button-2009/dp/B004D0I11S

http://www.thezstore.com/page/TZS/PROD/45-4282

http://www.amazon.com/dp/B00B4XBQPU/

Screw cap covers for license plate.

I recommend those as cosmetic upgrades, as well as white LED lights for the visor, dome, and license plate. It's incredibly simple to replace and in my opinion it makes it look much better.

A more expensive (but worth it) would be a gloss black vinyl roof wrap.

I bought this one from GrimmSpeed . It's a little pricey but held up when someone hit my bumper lol. I have a 2015 IS250 so it should fit yours

Your solution is security license plate bolts + cover. The bolts will prevent almost anyone from removing the plate, unless they carry a security torx bit set, and the cover will deter 99% of people from attempting to remove the sticker. Who's going to try cracking the cover to get to the sticker?

https://www.amazon.com/lebogner-License-Standard-Unbreakable-Included/dp/B07BN57X4W/ref=sr_1_3?keywords=security+license+plate+cover&qid=1555685709&s=gateway&sr=8-3

​

https://www.amazon.com/Stainless-Steel-License-Plate-Screws/dp/B07N67QN8K/ref=sr_1_1_sspa?crid=14PZ1788CWEDQ&keywords=security+license+plate+screw&qid=1555685732&refinements=p_72%3A2661618011&rnid=2661617011&s=gateway&sprefix=security+license+plat%2Caps%2C187&sr=8-1-spons&psc=1

Checked em all out, thanks! I think the JCR one is the winner for me, here is the link if interested

[These are cool] (http://www.amazon.com/Roadmaster-Scrolling-Digital-License-Plate/dp/B000MTSSIK)
Also, seeing as you look like a fellow [Studio Ghibli fan] (http://www.amazon.com/dp/B00CI8WX2U/ref=wl_it_dp_o_pC_nS_img?_encoding=UTF8&colid=39SNV45L41Q57&coliid=I1XN38YVYFS3VX)

Vroom Vroom!

Surprise me :)

look like I just want the license plate mount not a 'fender eliminator.'

edit: something like this would be fine, not sure if it'll fit though http://www.amazon.com/1997-2004-Eliminator-License-Aluminum-Motorcycle/dp/B004PC5FQI

all i can find for the 02 600 is the axel mount, which I am not a fan of.

Since your tow hook cover has already been removed, the Platypus License Plate Mount for BMW 3 Series (E46) 1999-2005. I got one for my E90 and it looks fantastic, though I may add some matte silver license plate frames at some point to better match my car's aesthetic.

https://www.amazon.com/dp/B07HHMD4CX/

It’s not exactly cheap but I like this one a lot. It took about a minute to install and can be taken off easily.

These are the ones I got - Ohuhu 4 Hole License Plate Frame 2 Pcs Slim Stainless Steel Polish Mirror License Frames Screws https://www.amazon.com/dp/B01M25MOB7/ref=cm_sw_r_cp_apip_Rtd1PlNvh6yYB

They were fine but I just didn't like the look of extra chrome. Maybe black frames would look better. Yea I agree, Tesla frames are unnecessary when it says tesla right above it.

https://www.amazon.com/Anti-Theft-License-Plate-Screws/dp/B07N67LTHP/ref=sr_1_9?keywords=license+plate+screws&qid=1556136209&s=gateway&sr=8-9

​

yes, these are called security screws for license plates... it doesn't make it impossible, just slows them down enough to find an easier target...

I ordered this one.

Karoad Stainless Steel Car Licence Plate Cover https://www.amazon.com/dp/B01M2628XO/ref=cm_sw_r_cp_apap_SXEcLfStgBL5E


It was already pretty matte, but I sprayed it with Plastidip to better match the badges.

Stay away from this one. Bought it a few week ago and lost my front plate yesterday on the freeway.

https://www.amazon.com/gp/product/B0776S37CR/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Thinking about getting this next; quality looks better and there are several reviews from s2000 owners.

https://www.amazon.com/2000-2003-Honda-S2000-License-Bracket/dp/B01AX9BAME/ref=sr_1_3?keywords=s2000+tow+hook+plate&qid=1565329418&s=automotive&sr=1-3

If you want a center mount, this looks like a good option if you don't mind restricting some flow to the radiator.

https://www.slybrackets.com/

I appreciate the shout out! I just got them listed for sale on Amazon as well, here's the link:
http://www.amazon.com/gp/product/B00JK5RDOC

I have the manual version of this. Its called the Sto-n-sho. Thing takes hits like a champ which I guess it should for what they are charging.

https://www.amazon.com/Premier-Quality-Products-25-341988-Detachable/dp/B06ZY4F6N9/

I found some license plate rubber "trim" at my local auto parts store to help dress up the plates.

I’ve got this,

Pilot Automotive Pilot WL170-E1 Stretchable Urethane License Frame Trim, 1 Pack https://www.amazon.com/dp/B00U1N7FMM/ref=cm_sw_r_cp_tai_RmIDCb54W483K

It’s basically a rubber bumper around the sides of the plate. Lifts the metal off the car and theoretically doesn’t scratch the clear coat.

🤷‍♂️