#14 in Home storage hooks
Use arrows to jump to the previous/next product
Reddit mentions of Command Refill Strips, Medium, White, 9-Strips
Sentiment score: 3
Reddit mentions: 17
We found 17 Reddit mentions of Command Refill Strips, Medium, White, 9-Strips. Here are the top ones.
or
- INCLUDES - 9 Indoor Small Replacement Strips
- RE-HANG HOOKS – Reorganize when inspiration strikes! Command Small Refill Strips make it easy to hang and rehang your Command indoor hooks, damage-free
- ORGANIZE DAMAGE-FREE - Say goodbye to holes, marks, or sticky residue on your walls, doors, cabinets, or closets; Command Hooks by 3M are easy to use and help keep your walls looking beautiful
- STRONG AND VERSATILE- Command indoor hooks hold strongly on a variety of surfaces including painted walls, finished wood, glass, tile, metal, and other smooth surfaces
- Not recommended for mounting or hanging frames - use specially designed Command Picture Hanging Strips or Hangers instead
Features:
Specs:
| Color | White |
| Height | 5.75 Inches |
| Length | 0.32 Inches |
| Number of items | 1 |
| Size | 9 Refill Strips |
| Weight | 0.0220462262 Pounds |
| Width | 3.88 Inches |
Hang it up with command strip refills. They work great, I use them to hang up tons of stuff!
Something like this! This have some with velcro and some with just two sticky sides. I used the sticky ones but either would work!
Command Refill Strips, Medium, White, 9-Strips - 17021P https://www.amazon.com/dp/B0014CQGW4/ref=cm_sw_r_cp_apa_i_e1VBCbFSP2G9A
Edit: I spelled velcro wrong
It sure does; it's stuck fast. Hell, I can grab it and wiggle it and my whole desk moves
I used these: https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=pd_sim_60_17?_encoding=UTF8&pd_rd_i=B0014CQGW4&pd_rd_r=SDC263Y1FQE5M2HD6KM3&pd_rd_w=Al9ST&pd_rd_wg=An4o2&psc=1&refRID=SDC263Y1FQE5M2HD6KM3
Just straight stuck on to the desk, none of that velcro-like stuff
I have done this! Home depot sells big 4x8 sheets of whiteboard like material. In the store it will be labeled as 'white panel board'. http://www.homedepot.com/p/Eucatex-32-sq-ft-MDF-White-Thrifty-Panel-Board-143973/204982659
Then buy a bunch of command strips. http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_3?ie=UTF8&qid=1418242347&sr=8-3&keywords=command+strips
Put 2-3 strips on each side of the back of the board (8-12 strips per board) leaving just the rounded tabs sticking out past the edge of the board. Then peel off all the wall side backings from the strips and place the board on the wall.
You will only have one go at this, if you miss place the board, you will probably have to replace all the command strips to try again, so be careful. Then, press down hard on the location where each command strip is. You will have to leave small ~1" gaps between the boards so that you can get at the command strip tabs in case you need to remove the boards.
Just a couple of those double-sided adhesive things with the pull tabs. Works wonderfully!
Like these: https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4
https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=sr_1_5?ie=UTF8&qid=1478219339&sr=8-5&keywords=command+strips
Command strips
Command Refill Strips, Medium, White, 9-Strips https://www.amazon.com/dp/B0014CQGW4/ref=cm_sw_r_cp_api_MX9UBb7438GR5
I used a few these type of adhesive pads.
http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_5?ie=UTF8&qid=1457997991&sr=8-5&keywords=3m+adhesive
They're holding really well so far.
Yeah. Just use those same Command Refill Strips. Each strip holds 1-2 lbs. They are safe for painted drywall and do not leave a residue when removed.
In fact, I used two of them to adhere the USB Charger behind my dresser. I'm sure 4 strips would be plenty to adhere a router to the wall.
I got my mount over the weekend but adhesive was stuck to the paper and I couldn't take it off. I ended up taking off all the foam and replaced it with Command Medium Mounting Strips and it seems to be holding up.
(sorry - thought this got eaten in a spam filter and was sad)
This is 3M magic adhesive that I have used before and doesn't cause damage when removed a year after application.
My flatmate speculates the wall is made of plaster, if that helps.
I was planning on using either:
large 3m strips
which are rated by 3M at 5 lbs/strip, and put 9 strips/board, and maybe fill in the gaps with something that comes 9 strips/pack like these medium strips (3lbs/strip)
The Planeswalker art above the TV are actually posters. You could try multiple 3M sticky strips https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4
might take a few since playmats are heavier.
3M command strips are what you want.
I mount all my door/window sensors + IR sensors with them.
http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_1?s=industrial&ie=UTF8&qid=1457396625&sr=1-1&keywords=3m+command+strips
They don't damage any surface. (thought you Americans would be pretty cluey about 3M products)
https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1497431231&sr=1-2-catcorr&keywords=3m+command
[I wondered the same thing earlier] (https://www.reddit.com/r/MechanicalKeyboards/comments/47503q/help_question_for_the_modders_and_custom_builders/). I'm inclined to take a0-c's advice and just do the command strips. They do make those strips without the hooks included.
> I'd set one of my sensors right on top of the thermostat
Don't do this. Heat rises. Heat from the thermostat will affect the sensor. Stick on the wall next to the ecobee3 using a Command Strip or something else that won't leave a mark when you remove it.
If you are looking for a temporary permanent solution Command strips work wonders. I've nailed a few USB hubs down with them. No marks when you remove them either.