Reddit mentions: The best utility hooks

First of all Kim Guzaman's Video Tutorials are indispensable. They helped me so much in the beginning. I agree with both /u/I_heart_DPP and /u/boyd121 that you should definitely work up a small swatch and start with that just to get the hang of the "simple" stitch. I then recommend making a smaller project like a scarf or dishtowels to get your tension down. You can use a regular crochet hook with a hair tie wrapped around the end as a "stopper" until you get the hang of it.

A few key points of Tunisian Crochet:

1.) Always try to start your project with the Tunisian Purl Foundation Stitch this will help alleviate the "curl" that can occur with Tunisian crochet.

2.) Use a hook at least 1 but more likely 2-3 times larger than the size recommended by the weight of the yarn you are using.

3.) The width of your project should not exceed 3 times the length of your hook. For example, if you want to make an afghan that is 3 feet wide your hook+cable needs to be at least 12 inches long.

For me, this technique is much faster. I made this Tunisian Watercolor Scarf in a couple of days. It's super fast once you get in the groove. :-D

Once you practice a bit and feel like you want to try a larger project (i.e. afghan) I recommend something like this simple (yet beautiful) Tweed Blanket as it incorporates a few techniques to challenge yourself and move beyond the simple stitch, including color changes, to keep things interesting.

I love my Denise Interchangeable Tunisian hooks. I bought a few supplemental cables from ebay for really large projects in 25", 40" and 60" lengths. They slide through the stitches like buttah' and the cables attach strongly and easily.

I hope this helps! Happy Hookin' :-D My inbox is always open if you have any questions.

EDIT: Formatting

"The past is of no consequence. It cannot be changed. The future is a blank slate." I like to keep this in mind, as another impatient individual. We really never know what's going to happen. Anything can change. Plan all you may, but all you really have is now. Enjoy it, before it goes.

As for brightening your day. Post some pictures around where you work, carry them with you. Remember why you're doing what you're doing. YOU are your own worst enemy. You are stronger than you can imagine. When you feel out of whack: Stop, breathe, think, and find something beautiful about the place your in. If that isn't possible, close your eyes for a few seconds and imagine where you want to be.

You can try to volunteer at a shelter for animals, a thrift store, soup kitchen. Go through your things and donate stuff. Find a homeless man/women/child, and ask them if there's anything you can do for them. I recently gave a homeless man that walked by my house a bag of cans to recycle, and some older blankets I don't use. He was more than grateful. Heck offer to buy them a meal, or make them a samich. Oddly enough, I've also let a homeless man use my shower. That was kind of weird, but... I felt he needed it, and I knew who he was from talking to a friend. Anything you can do to brighten someone elses day, will also brighten yours. By a LOOOONG shot.

Cleaning. I like to clean. Most people don't seem to, but I find it helps to relax, feel accomplished, and it takes my mind off of the impatience. It gets something done right then and there.

I could probably suggest more but this is getting long winded. >_>

I could use this.

Ahhhh these are my favorite things to encounter!!!!!! A few things I love as a stanky lady on playa (in case you care)

• poo-pourri. Maybe buy 10ish and just restock if they are commandeered?
  
• dry shampoo
  
• spray deodorant
  
• lavender wipes to go
  
  Another BIG one I would love to see -- why not also decorate a cool, small trash bin for people to put their wipes into? The wipes are not supposed to go into the potty hole, but time after time again I see them in there when I look into the hole. What I imagine is that someone didn't know, brought it into the porto, used it to wipe their poo-poo, & see the signs but are now like "well shit what do I do?" So maybe having a place for their wipes would help this!? It will be gross for you but just strap on those rubber gloves baby!
  
  I'm assuming you are planning to come through every once and a while to check on your gift so maybe it can be a little daily :)
  
  In terms of securing stuff, would it be kosher if you got a few of these bad boys and then tied the items to hang them?
  
  ​
  
  I have no idea if this info is helpful but hope it is!! And hope I get to experience your porto gift!

I pm'd you, and you said to go ahead and post, so here I go! (If it's too late, I understand, no worries!)

1: This delightful elephant teapot! It relates because you need a drink to toast with, and I need it for school because I'm pretty sure it's illegal to go to boarding school in England without a teapot.

2: Command Hook Refill Strips It relates because brooms are for cleaning, and organizing is related to cleaning. I need it for school because I love hanging things up in my dorm room, and I wouldn't dream of damaging the walls of Hogwarts!

3: This figure of Irvine from Final Fantasy 8 It relates because he wears a hat, and he used it in the game to flirt with one of the other characters. They're both my favorite characters from the game, and I love their understated romance. I need it for school because I like displaying my nerdy side with action figures in my dorm room.

4: TokyoMilk Dark #28: Excess Because I want an EXCESSIVE AMOUNT OF BOOKS. And I need for school because, I mean, there will be dudes and probably some ladies at Hogwarts who are in to ladies and I intend to capitalize on that at some point.

5: Cards Against Humanity: The Bigger, Blacker, Box It relates because the box is basically the size of a trunk, and you can put LOTS of cards/stuff in it. I need it for school because no friendship is complete until you see how terrible a person you each are, and I plan on making lots of friends.

6: An Appa Plush! It relates because capes allow superheroes to fly, and Appa flies, and Team Avatar are essentially superheroes so you could say that Appa is their collective, living cape. That they lose at one point. I need it for school because I need something to cuddle at night to help me not feel homesick.

Mischief Managed!

ok here we go:

I just moved and regret all the stuff i brought along! one thing that drives me crazy is I went from a large kitchen to a smaller one with less space...so these would be really useful!


.

I also love over the door hooks when bathrooms do not have enough towel rods. (they have other ones that are single hook or double hook if you need less).

.


And last but not least, i shall suggest /r/DIY a lot of the projects are bigger in nature but they have a lot of small ones too! might be good to search for something specific you need (like a garden? or dvd/game/cd holder)

.


I hope you find a home for all of your Little boxes on the hillside! And I am another day closer to going back home so I shall def enjoy my Friday!! :)

Easy way to brighten up student rooms:

• Get yourself some Command mini hooks which you can remove without damaging the walls. Place these at roughly 20-30cm intervals along the top of the wall.
  
  
• Buy yourself some awesome fabric in whatever length you need (hit up ebay and amazon for bargains, or searching in town.
  
  
• If you want to be all fancy-pants, make eyelet holes or loop tabs at the top of the fabric
  
  
• Hang fabric on wall. You can have all one colour/design; mostly plain with one bright/patterned strip; ombres or rainbows; printed/painted patterns... anything you want. You can do all of one wall, the whole room, just one feature strip... whatever your heart (and budget) wants!
  
  
• Stand back and admire the awesomeness that are your walls. You can now pin up any posters with blu-tack, and it won't mark the walls, you'll have protection from knocking/scratching the paint, all of it is easily changeable, removable and customisable, and it'll easily move with you to a new place if you want it to.
  
  ProTip: I did this at Uni and fucking loved it, but my friends did tend to want to customise my wall-hangings. A couple of pen-marks seeped through the fabric onto the walls. If you fancy writing onthe walls, or think people might, hang cheap wallpaper lining paper (or even a layer or two of newspaper, nything really!) behind the fabric, just in case.
  
  Another tip: get yourself on Freecycle - I furnished my entire house from it, including all appliances, for nothing more than cost of picking stuff up.

Here's some ideas:

• Lights/garlands around walls with command hooks to get this look. If your decorations are heavier, get bigger hooks. These are temporary and very easily removed and put up.
  
• Decorating around the TV looks so cozy.
  
• Sticky Tack to put up things like snowflakes on walls or doors (also very easily put up and removed!)
  
• If you don't have space for a tree, you can try things like this or get a little tabletop one.
  
• This wreath hanger might work (depending on how thick your door is). Does no damage, I use one just like it!
  
• Window decals don't take up any space and are temporary.
  
• Hanging ornaments on cabinet handles (surprisingly hard to find pictures of this, I do this all the time, just have to make sure you don't use ornament hooks and tie things with string or they might fall off and break).
  
• Holiday decor for the rest of the house can make a big impact for how your space feels. Things like bedding or bath decor.
  
  I would focus on decorating by area to make the rest of your home feel festive, if you can't focus around a fireplace like you seem to have in the past.
  
  ​

What I love about myself is my braaain :) And people like that I have a bubbly personality, so I like that too!

This hook door hanger thing would make me happy because it's useful!

Its surprising some of the things you find out that you need after you move in.

1. Trashcan
   
   
2. Can opener... I had to get really creative one night trying to open a can
   
   
3. Flash Drive with high storage
   
   
4. Mirror
   
   
5. A nice rug
   
   
6. Shower Caddy or if you have communal bathrooms portable shower caddy
   
   
7. Command Hooks and tabs
   
   
8. Over the door hooks
   
   
9. Desk Calendar/planner
   
   
10. A few cheap dishes and flatware for microwave meals
    
    AND A FISHY TO BE YOUR FRIEND!
    
    These are just a few things. I just graduated college and I will never again underestimate the necessity of duct tape and a plunger :P
    
    EDIT: Would you like a falafel with that?

• Air Freshener - Fbreeze is best. I had a roommate that used axe body spray as air freshener. Fuck him.
  
• Microwave + Mini fridge - It's not fine dining, but super handy to have for late night snacks or when you just can't/don't want to make it to the food court
  
• Beds on lofts and a couch/loveseat - we had a couch in our room, which made us a popular hang out spot. With the beds up high there was room underneath for other stuff (couch on one side, TV, fridge, microwave and whatnot on the other)
  
• My freshman year, rope lights were very popular. They can be cheap mood lighting.
  
• Sticky Hooks - many colleges will only let you use these to hang things. Also, if you want to hang a poster you will want poster hangers
  
  EDIT: Typo

• First thing first, you can hang all of your pot and pans from the ceiling. Something like:
  
• https://www.amazon.com/Sorbus-Rack-Ceiling-Hooks-Multi-Purpose/dp/B07D4RDCMB
  
• This would free up A LOT of cabinet space for storage of items that can't be hung.
  
  
  
• Next, You could use sticky hooks to hang your various range use utensils(Gloves, Spatulas, tongs, etc) above your range. Something like:
  
• https://www.amazon.com/Command-Decorate-eCommerce-packaging-GP001-9NA/dp/B0751RPD3V
  
• This would free up some additional drawer space.
  
  
  
• It looks like you are probably doing meal prep on the left side of the second picture. If so, your spices could go on the edge of the counter there.
  
• Your appliances could go in that thing all the way to the left in the second picture OR you could put a rack over to the right of your countertops in that first pic to hold them. Something like this:
  
• https://www.amazon.com/AmazonBasics-3-Shelf-Shelving-Unit-Black/dp/B01LWP8AL2

I don't have a picture right now but I did my whole wall with these, a leveler, and a ruler. 2 hooks for the bottom of the record and one hook upside down to hold the top. Would cost you about $26 to do a big wall. It's a perfect fit and the LPs slide in and out from the hooks smoothly, so you can swap records out very easily. I can put a picture up tomorrow

Just as a heads up, there are headphone stands on amazon that are very similar to this design: http://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_1?ie=UTF8&qid=1459127066&sr=8-1&keywords=wall+headphone+stand

I don't know if you're trying to do it for the joy of DIY, but if you're doing it to save money these are $6 each (I don't know how much 3D printing cost so sorry if it's a lot cheaper than that). They have some for desks too.

Thought I'd point it out, but otherwise awesome idea, especially being able to configure it differently.

My apartment has pretty terrible lighting and with fall/winter coming on strong in the Boston area, I decided to put together a little home gardening station to help with lighting and movement of the plants for watering. I went into this with the goal of having my setup accommodate most of my small collection of plants and to allow for easy movement without having to mess with the grow lights. In the end, I decided on a cart-based design composed of the following items:

Bror Utility Cart 33 ½” X 21 ⅝” X 34 ⅝” ($99)

https://www.ikea.com/us/en/p/bror-utility-cart-black-pine-plywood-60333850/

Bror Add-on Shelf 21 ⅝” X 6 ¼” X 5 ½” ($10)

https://www.ikea.com/us/en/p/bror-add-on-shelf-black-20402001/

Koppla 3 Outlet Power Strip 19 ¾” ($4.99 for two pack)

https://www.ikea.com/us/en/p/koppla-3-outlet-power-strip-grounded-white-00086428/

2x Hemma Cord Set, Black 15’ 5” ($7.00 each)

https://www.ikea.com/us/en/p/hemma-cord-set-white-10175810/

(IKEA site only has white showing up now, black was available in-store)

2x Luftmassa Lamp Shade 10” ($17.99 each)

https://www.ikea.com/us/en/p/luftmassa-lamp-shade-rounded-70462648/

Kasa Smart WiFi Plug Mini HS105 ($21.75)

https://www.amazon.com/gp/product/B01K1JVZOE/

Relassy 20 Watt Dual Head, Gooseneck, Full Spectrum Grow Lamp ($27.39)

https://www.amazon.com/gp/product/B07C68N7PC/

2x GE 9 Watt BR30 Balanced Full Spectrum Bulbs ($9.98 each)

https://www.amazon.com/dp/B07NN6SVG6/

4x 3M Command Utility Hooks 3 lbs ($8.99 for nine)

https://www.amazon.com/gp/product/B0751RPD3V/

2x Velcro Thin Ties 8” X ½” ($9.70 for 100)

https://www.amazon.com/gp/product/B001E1Y5O6/

Total Cost (pre-tax): $234.76

I use this but to be honest, it's kind of long and sticks out a bit. This one would probably work as well.

Tornado is a solid brand. They're strong enough to hold them up, and you can kind of spread them out a bit too if they don't quite fit on your trucks.

I have 4 of these. Easy to install and work great. Just follow the directions carefully - ensure the wall is clean before applying.

http://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2

Those aren't command strips. Command is a specific 3M product line that has a non-sticky pull tab that you use to remove the strip without causing any damage. They are a renter's best friend. What you want is this. Like I said, cut each one lengthwise into 2-4 skinny strips so that they fit completely within the width of the cable (and each strip will have a portion of the pull-tab), and attach a strip every 6-12 inches for your entire run.

I use standard 3M wall hooks (large size). They fit the ring on top of the wands perfectly, and the strap on the headset sits comfortably on them as well.

$50 for about $15 in materials and a tiny bit of thought, really?

Large J Hook - $8 - Can be hand bent out to fit center bar gap on the back bar

GoPro Tripod Mounts x3 - $4

I am usually not one to trash ingenuity and designing your own products to fit your needs, but $50 is a joke. I understand you're selling to a pretty niche market here, however $20 is probably more appropriate a price.

It's nowhere near as good as a wireless setup, but it's a great option if you can't go wireless.
It can be tricky to get it setup correctly so I would advise against using the adhesive hooks that come with then. Command strip hooks do the job just as well and are much easier to remove if you need to make adjustments. https://www.amazon.com/Command-Damage-Free-Small-without-Packaging/dp/B0751TRS6Y/ref=pd_aw_fbt_60_img_3/132-3517570-4357667?_encoding=UTF8&pd_rd_i=B0751TRS6Y

You also need to use the turn signal app if you use the pulley system as your cable will get tangled.

Oh wow i thought you were kidding i imagined this Command Large Utility Hooks, 7-Hooks, 12-Strips (GP003-7NA) - Easy to Open Packaging https://www.amazon.com/dp/B0753NHZVQ/ref=cm_sw_r_cp_api_fRN3AbA1514EK hahaha

Yes, go back to IKEA! Somewhere near the end, around the lamps and ceiling lights, I found these cheap cable snake sleeves:
https://m2.ikea.com/us/en/p/rabalder-cable-organizer-white-20281419/

I also use these for cables under the desk after separating out of the snake and organizing under the desk:
https://www.amazon.com/Command-Clear-Clips-Strips-CL017-13NA/dp/B076ZT3FVN/
These too:
https://www.amazon.com/Command-Damage-Free-Small-without-Packaging/dp/B0751TRS6Y/

And these are great for individual cable control:
https://www.amazon.com/Planet-Waves-Elastic-Cable-10-pack/dp/B001PGXKCS/

I've added to and removed from my setup half a dozen times since I last organized my wires so they're a mess again, so be aware that it's a constant battle.

Edit: these look pretty good too, am going to get some myself if I don't make it to IKEA soon:
https://www.amazon.com/Alex-Tech-25ft-Protector-Sleeving/dp/B07FW3MKGH/

Two command strip hooks each, in the middle on the top and bottom. They're cheap and easy to put up and take down.

they're difficult to fit a lot of 2 disks vinyls (camp's vinyl is a pain to take off the wall), and if you're super serious about not damaging the art work (some vinyls I've hung up has little scratch on them from sliding the hooks against them), go for a better option, but they're great with most.

Amazon link to buy the command hooks I used

Looks like you made your own plyo-box, nice. Next thing I’d strongly recommend are [tornado hooks]( Tornado 00515 J-Hook https://www.amazon.com/dp/B0050PKJ88/ref=cm_sw_r_cp_api_97rVAbP1KQ9Q7 ) to store you barbell on the wall.
How do you like those bumpers?

I lived in a house where the doorframes extend all the way to the roof so I had to build a custom mount for a hangboard. What I did was buy a simple door frame pull up bar like this and mounted the hangboard to a piece of plywood and then fixed some large hangers on the back of the hangboard so that it could be hung over the pull up bar (make sure you get some very sturdy hooks for this, I used these ones. It's worked very well for almost 3 years now. Highly recommend this approach!

I would avoid purchasing any accessories now that require power from the port. Right now, there are too many variables to buy any accessories that may require power from the accessory port such as headlights, etc., but you can get those once the port is revealed. To my knowledge, their are no backpacks that can carry the board. You can, however, slide your boosted board through the 2 straps on a regular backpack wheel-side facing your back and then put the backpack on to carry it around. A good option for a wall mount would be this: https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW?ie=UTF8&redirect=true If you have any more questions, feel free to ask!

Large Command Hooks

You basically just set up the command hook so that it's tilted (pointing at around 10 o'clock) and then the sensor nicely snugs itself in and conveniently points slightly downward as well

They're also pretty useful for a place to put your touch controllers (learned this one from another redditor)

For my Zstrip I used these clear holiday light clips to keep it held down, it works phenomenally and the strip perfectly fits through the hook. None of them have fallen off or anything, at least not yet, and it’s been holding it down for months now. Command 3M Clear Mini Light Clips

Love my Denise Interchangeable set, I rarely use them for Tunisian since I haven't put the time into learning anything beyond tss, but they're my go-to hooks for pretty well every project.

This is the best solution. Buy a bunch of Command Hooks and do a neat job, and your landlady probably won't mind.

Awesome! Cool to see other people have tried it. If it helps here's a link to the command strips I used. Not too expensive if you buy them without the hooks.

Here you go, friend.

These are the ones I got. Super cheap and they work great.

Headset Hooks are off Amazon. 2 pack for $12.

http://www.amazon.com/gp/product/B00P9GYUE2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

They are pretty cheap plastic and wasn't too happy when I got them. But they do their job and have been holding up fine, so I guess it's worth it considering other headset stands are big and usually $15-20+ each.


As far as the desk extensions, since Ikea removed their Galant lineup, I don't think you can anymore. But they were sold separately a few weeks/months ago. Try craigslist or searching through their online store, might get lucky.

Not sure what youre going for or have looked at. This might be way off, but i looked up 'j hook' and these are pretty nice id buy 2 of them.

Paste what you were looking at... maybe thatll help narrow it down.

Is the issue that they don't stay plugged in?

If yes, there probably isn't a good solution, however what you could try is:

• bring an alcohol wipe and clean off the area on the outlet and your charger
  
• use the 3m command strips refill pack to create a temporary bond
  
  Command Replacement Strips (17022-ES) https://www.amazon.com/dp/B000FDLFBK/ref=cm_sw_r_cp_apa_i_GMPJDbF43E89W
  
  Another option would be to get a short extension cord so that you could safely bend the prongs in or out to create tension on the socket and help it stay in
  
  Edit: clarification on the approach to a falling out problem

Mine definitely has help. I use these. :)

Looking to clean up my brewspace a bit, wondering if anyone has any idea what I can do to get my 6.5gal buckets up and off the floor. An upside down mount is preferable.

I'm hoping to find something like this, but instead of going out (away from the wall) as much, it would go up more to keep the bucket more secure. Thoughts?

I got one if these from home Depot, and it works pretty great.

https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW/ref=pd_lpo_vtph_469_bs_t_1?_encoding=UTF8&psc=1&refRID=ZWD329V4NP21HCXRAYFV

Not that I know of. Epoxy is pretty strong and whatever you use to remove it will most likely take off the paint as well. You can always repaint it.

Alternative is to use command hooks. They have the pull down tab that can be easily removed later. But since this is outdoor, heat will be a problem and these will probably fall off on their own after some time. Just buy new one and replace them if that's the case

https://www.amazon.com/Command-Small-16-Hooks-Strips-GP067-16NA/dp/B0751TRS6Y/

Not OP but these are the best type I've found!

Here ya go.

For others curious, the Headset is SteelSeries Arctis 7. They frequently go on sale--I got mine below $100. It's a fabulous headset. The only reason I wouldn't recommend it is if you happen to have a really big head--they fit my kinda-big noggin ok, but I'm right at the end of what they can handle comfortably.

Just a couple of those double-sided adhesive things with the pull tabs. Works wonderfully!

Like these: https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4

1. [These hooks would be a lifesaver] (http://www.amazon.com/Command-Large-Plastic-Hooks-3-Hook/dp/B000M3V8XI/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=1L8ON2MX2QPTV&coliid=I3F96OVA7N2O59)
   
2. Eek...its 7:23 (Seattle time) and I realized I didn't eat lunch. I had a super stressful day and didn't feel much like eating. I think there was a bag of pretzels today. whoops.
   
3. lunch money
   
   Thanks for the fun contest!

Yeah. Just use those same Command Refill Strips. Each strip holds 1-2 lbs. They are safe for painted drywall and do not leave a residue when removed.

In fact, I used two of them to adhere the USB Charger behind my dresser. I'm sure 4 strips would be plenty to adhere a router to the wall.

http://www.amazon.com/gp/aw/d/B000OEGCL8/ref=mp_s_a_1_1?qid=1464387681&sr=8-1&pi=SY200_QL40&keywords=command+hooks+small&dpPl=1&dpID=413FJ5JQFPL&ref=plSrch

Get one of those. super glue a piece of wire across the back of the pub, make sure there's not much slack. Hang it from the hook

I mean... we just installed something like this: https://www.amazon.com/dp/B0050PLCUW/

It was less than 10$ and you can even hook the final part through the two prongs and it holds it in place great. I don't know why you would need to rig something up on the ceiling and stuff. Why would you think it would be easier to use? Did you install the plug on the wrong wall or something?

If you need, I could take some photos when I get home.

I just went with the larger tornado hook. Two screws right into drywall holds a BB perfectly. Looks good.

https://www.amazon.com/gp/product/B0050PJ2PE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I agree with this meme to an extent. I feel like mouse bungees area waste of money. I've been using a single Command Hook as long as I can remember and haven't had any problems with it, and even better it's out of the way stuck on the back of my monitor. Recently switched back to the fUNC F10.s that comes with a cable "bungee" that is on the mousepad. Bungee's seem like too much of a gimmick to me

I don't know how to do links properly : https://www.amazon.com/Command-Hooks-Value-18-Hooks-17006-18ES/dp/B001KYOGJG/ref=pd_sim_60_1?_encoding=UTF8&pd_rd_i=B001KYOGJG&pd_rd_r=61dfb6c7-cf29-11e8-84cd-5d1350972647&pd_rd_w=84DUQ&pd_rd_wg=iuSsC&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=18bb0b78-4200-49b9-ac91-f141d61a1780&pf_rd_r=PPXY6N49G8BXSB8M3K7G&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=PPXY6N49G8BXSB8M3K7G

https://www.amazon.com/LeHigh-Crawford-Flip-Storage-FSR13/dp/B0000DH4NL/

i used the 2 included screws (regardless of what the reviews said), drilled directly into a stud. rock solid.

i only had to pay a really small non-refundable deposit so i have a lot of freedom in that regard. in general though, if you have access to matching paint, you could patch up any of the holes you'd need very easily.

Yes they do. I'm surprised that they aren't available in Sweden; they're a 3M product. Here they are available in almost any DIY shop and some stationers. Do you have Amazon in Sweden?

https://www.amazon.co.uk/Command-Clear-Hooks-Strips-17006CLR-VP/dp/B0084M67P8/ref=sr_1_18?ie=UTF8&qid=1501243959&sr=8-18-spons&keywords=command+clip&psc=1

Or some zip ties. Hold ém to the underside of the desk with some of these. I used this combination for cable-managing the inside of my Antec 300; they work pretty well!

Very nice since your monitor didn't come with a headphone hanger like many do, why not put one of these on the back:

https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2

actually im pretty sure this is it:

https://www.amazon.com/Tornado-00510-Extended-U-Hook/dp/B0050PJ2PE/ref=sr_1_1?s=hi&ie=UTF8&qid=1469717508&sr=1-1&keywords=orange+u+hook

It looks exactly like a Command hook. https://www.amazon.com/gp/aw/d/B0753NHZVQ

OP, If I'm right, they are easy to remove and reattach later before moving out. You would have to buy a new sticky strip for it.

Hang it up with command strip refills. They work great, I use them to hang up tons of stuff!

You’re welcome to try but I don’t think the pins would be able to support the shelf, let alone anything you put on top. You should try some of these hooks. They stick to the wall and are designed to be removable without leaving any marks.

I love my Denise Interchangeables - http://www.amazon.com/DENISE-INTERCHANGEABLE-CROCHET-HOOK-SET/dp/B001IAHNCE

Command Light Clips, Mini, Clear, 45 clips, 54 strips, Indoor Use (CL806-45NA) https://www.amazon.com/dp/B076ZRRFD4/ref=cm_sw_r_cp_tai_Jag4DbZVAPJ4F also Aldi’s sells generic brand clear ones.

1. Two of these (https://www.amazon.com/gp/aw/d/B0050PLCUW?pc_redir=T1&redirect=true)
   
   
2. The tool to change the battery comes with it, but you will need a skate tool (Search on amazon and find one you like)
   
   
3. Currently, the only option is buying Shredlights. They make you more visible, but don't help you to see. Also, many people haven't been able to mount the tail light.
   
   
4. Easy choice (https://www.flatland-3d.com)

o.O it bothers me, please change them all to the clear ones lol.

https://www.amazon.com/Command-Hooks-Value-18-Hooks-17006CLR-18ES/dp/B0084M67P8

I see. I recommend something fancier like a Utility Hook:

http://www.amazon.com/Tornado-00515-J-Hook/dp/B0050PKJ88/ref=sr_1_1?ie=UTF8&qid=1419880108&sr=8-1&keywords=utility+hook

Thanks! I got it on amazon here

They don't damage any surface. (thought you Americans would be pretty cluey about 3M products)

https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1497431231&sr=1-2-catcorr&keywords=3m+command

I wonder if you can get away with using these? Depends on how much weight you put on them but I bet it would work + be cheaper?

Command Light Clips, Mini, Clear, 45 clips, 54 strips, Indoor Use (CL806-45NA) https://www.amazon.com/dp/B076ZRRFD4/ref=cm_sw_r_cp_api_i_FRWZDb4TE5ZT5

The equipment pictured are:

The Rift S, and updated Touch Controllers.

Command mini-hooks to mount the touch controllers in grabbing position when not in use.

Saitek X45 HOTAS setup - I found a number of these used available for around $45. They no longer support Windows 10 with their drivers, but these work fine for me with the older drivers. No link because any link to a used set will be sold soon after it's posted.

Selfpro men's sweat wicking headbands. They help reduce sweat and heat in the headset, as well as hold your hair back so it can't grease up your lenses.

Koss KSC75 headphones. Take off the clips and just tuck them under the headband, over your ear. Wind the cord around the halo over your ear, so that at rest they dangle in the right palce. The clips snap-off and snap-on, so prying them off won't damage them.

Three inch googly eyes. Easily the most important part of this kit after the headset itself.

Amazon Basics rechargable batteries.

Universal battery charger with LCD display.

Powerpax storacell AA battery caddy, so I don't have to fuck about with loose batteries. Take batteries from the right, add recharged batteries on the left. If you don't pack it 100% full, the empty space can show you which batteries have the oldest recharge - first in, first out.

Cheap and shitty A-frame computer desk.

Not pictured: Shitty Essentials armless swivel chair

EDIT: There are not any custom grips. The stock straps are hitched to the ring and re-attached.

I'm not sure you would need to fix the extra board. It might just lay on top of the mantle. If not, as said, holes in the wall are less difficult to deal with. Or I wonder if you could do something clever with something like this...
Command Large Utility Hook, White, 3-Hooks, 6-Strips (17003-3ES) https://www.amazon.co.uk/dp/B000M3V8XI/ref=cm_sw_r_cp_api_i_dxBtDb1ZMKMY6

(sorry - thought this got eaten in a spam filter and was sad)
This is 3M magic adhesive that I have used before and doesn't cause damage when removed a year after application.

My flatmate speculates the wall is made of plaster, if that helps.

I was planning on using either:
large 3m strips
which are rated by 3M at 5 lbs/strip, and put 9 strips/board, and maybe fill in the gaps with something that comes 9 strips/pack like these medium strips (3lbs/strip)

Well, then that opens the door to stuff like this.

Thanks, I was worried there. The hook I'm using is tied to the leg of my desk. Easy to do that with all the holes. I'll reformat this link as soon as I'm on desktop: https://www.amazon.com/dp/B0050PJ2PE?ref=yo_pop_ma_swf

Allowed?

Are you, while showering, communicating with your broker with canned sms in pebble glance to buy/sell stock of the company you work for, based on info you get at work?

Are you using a remote camera control app to take pictures of said shower with other individual(s) without their knowledge?

Are you, during your cleansing routine, using pebble tasker and bittorrent to seed music and video files for which you are not the copyright holder and do not have express written consent?

Not allowed!

Seriously, just get these

I used this until I got mine. Not the prettiest, but it works.

Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_apa_ommryb6GKKK7C

It's a garage ladder hook lol

They are these, recommended to me by someone here on the Boosted sub.
Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW?ref=yo_pop_ma_swf

What I've done in the past is mount a cable ladder to the wall, then the other end to the top of the rack, then ran the cable up and over the ladder, so it's suspended... (something like this: https://www.tripplite.com/~SRCABLELADDER with this, I think: https://www.tripplite.com/~SRLADDERATTACH/ or maybe just some random bolts/plates from a hardware store).

Since your cabling is already completely ran/terminated, only thing that would work is what you posted or some sort of large U-hook.

$29 for hooks? Yeah, no thanks.

Half the price. Just as good.

I have my normal stock vanguard on it right there but I have a boosted board that I use on it.

I have j-hook, it’s the tornado brand I think

found them

Don't laugh. I have headphone stands that I use near my bookshelf and end-table. But, I have a smaller desk and not enough space for a full-fledged stand. So, I bought these:

https://www.amazon.com/gp/product/B00P9GYUE2/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

They stick right on to the wall using 3m tape and are solid. Plus, I like that it's wide enough to allow the headphone band plus cables.

A desk-length mousepad.

https://www.amazon.com/Corsair-Gaming-MM300-Anti-Fray-Extended/dp/B01798VS4C/

Monitor Mounts

https://www.amazon.com/gp/product/B00B21TLQU/

Cable Management knick knacks.

Ambient lighting behind your monitor. I just use a variable desk LED lamp.

https://www.amazon.com/gp/product/B01HOAVK0W/

Headphone wall mounts.

https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/

A decent speaker/sub combo for when you want to just sit back, relax, and watch a movie.

https://www.amazon.com/Logitech-980-000382-Z313-Speaker-System/dp/B002HWRZ2K/

A Microsoft Wireless Adapter + Couple of XB1 Controllers = local wireless multiplayer gaming (up to 8 controllers I think).

https://www.amazon.com/Microsoft-Xbox-Wireless-Adapter-Windows/dp/B00ZB7W4QU/

For what it's worth, I use these plastic sticky hooks to hold my glasses and sunglasses. I stick them to the wall, usually by the door and in a vertical line, for sunglass and in my bedroom for regular glasses. It displays them and keeps them out of the way.


You could probably get the several pound 3M stickies as well for the brushes and tubes containers and then you can stack the pallets under that.

These are the ones I used. It's also a very cheap way for not having the collection in a drawer :)

These are the lights I used

The wire is really thin, so I was able to use these command strips with a clear backing every few feet.

Command Small Refill Strips, White, 64-Strips (GP022-64NA) - Easy to Open Packaging https://www.amazon.com/dp/B0751RPC6Q/ref=cm_sw_r_cp_api_63r1Ab2VXJ83P

Display: Command by 3M Damage-Free Decorating Clips, 45 Clips, 54 Strips, Hangs up to 90 feet of lights, Easy to Open Packaging (CL806CLR-45ES) https://www.amazon.com/dp/B076ZRRFD4/ref=cm_sw_r_cp_api_ZQjZBb976G88Y

Storage: 3.75 gallon storage bin. Holds about 20–30 carded Hot Wheels. https://www.target.com/p/sterilite-174-clearview-latch-storage-bin-clear-with-purple-latch-3-75gal/-/A-13794491

I've had mine for a while now (8 months) and I can safely say they're quite durable by themselves, even dropped it a few times. If you're worried about damaging it, I advise getting some adhesive hooks and hanging off of that.

I use these hooks on an ikea storage thingy and it's been rock solid for months. Use two, one for both of the remotes and the other for the HMD. Hang by the rear of the headband (the triangle hole thingy).

http://www.amazon.com/dp/B00P9GYUE2/ I really like these things- command strip catered to headphones. I stuck them on the side of my desk. They work well.

I believe you would want these ones instead in order to fit the wheels: http://www.amazon.com/gp/product/B0050PLCUW

Found them. I guess I should have done that first.

Those are nice hooks.

I decided to hang my boards on hooks mounted to the wall. If anyone is interested, I suggest these hooks. You just need 1 per board and they cost $7: Tornado Extended U-hook

Would you recommend those over the Tornado J hooks?

https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_sms_t2_api_TYH4xb6PSSGZ0

Something like this? http://www.amazon.com/LeHigh-Crawford-Flip-Storage-FSR13/dp/B0000DH4NL/

An over the door set of hooks like this

https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_6?ie=UTF8&qid=1523573997&sr=8-6&keywords=headphone+mount

Thank you

I would think something like this would work
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2
if not just buy a controller hanger and hot glue it on

back in the stoneage, I used these in my dorm to hold up lights like that.

Does it lay flat to the TV, so that the strip faces backwards towards the wall? If so, is it just a straight strip or how did you bend around corners? I used these.... https://www.amazon.com/gp/aw/d/B0751TRS6Y/ref=sspa_mw_detail_0?ie=UTF8&psc=1

I solved this issue by using some small command strips!

I used a few these type of adhesive pads.

http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_5?ie=UTF8&qid=1457997991&sr=8-5&keywords=3m+adhesive

They're holding really well so far.

Here's a link:

https://smile.amazon.com/gp/product/B00OABXY9O/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1

I cut out 2 areas for the filters. It works great for keeping all the fish and snails in while also allowing my lights to fully hit the tank. Other people make frames out of screen window kits but I'm not handy enough to use a power saw so I secured the mesh to my tank with command strips:

https://smile.amazon.com/gp/product/B000M3YGHS/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

and just lift areas/corners of the mesh off when I need to access that part of the tank.

>I'm currently renting my house and I can't make any modifications at all...

run the wires behind the baseboard trim, or use these little clear
3M command hooks to just string the cable's up along near the ceiling.

I used one of these things with a fair degree of success

Tools used:

- Cable Clips (100 pack) - $12.49 on Amazon

- Command Hook (3 pack) - $6.29 on Amazon


- Oculus Rift Sensor Wall Mount (2 pack) - $12.99 on Amazon

I bought it in store and don't see it on their site...

The hooks are sort of like this, but dual single hooks rather than a double hook (although the double would work fine if balanced properly):

https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW/ref=sr_1_3?ie=UTF8&qid=1496154616&sr=8-3&keywords=tornado+hook

I actually have one that mounts to the side of my desk, it's a sticky pad attachment here is a link Stick-on Headphone Hooks 2 Pack https://www.amazon.com/dp/B00P9GYUE2/ref=cm_sw_r_cp_api_0ia6xbBTSYNMG
I would highly reccomend it if you have space for it. I used to use one that is just a stand on my desk and using this new one allowed me to use dual monitors

[Here's a pic of the jersey hanging up and a pic of the hook] (http://imgur.com/a/jeKXW). You can find them literally anywhere. I think I got mine at target and they're like 6 bucks for a pack of 2.

Edit: the hooks on amazon. They work like a charm and they are cheap as hell.

Got mine at home depot but first saw them on amazon. http://www.amazon.com/LeHigh-Crawford-Flip-Storage-FSR13/dp/B0000DH4NL/ref=sr_1_2?ie=UTF8&qid=1398650983&sr=8-2&keywords=bike+wall+mount

That is cute and all, but this is the exact same thing and they only cost 8 bucks.

I have done this! Home depot sells big 4x8 sheets of whiteboard like material. In the store it will be labeled as 'white panel board'. http://www.homedepot.com/p/Eucatex-32-sq-ft-MDF-White-Thrifty-Panel-Board-143973/204982659

Then buy a bunch of command strips. http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_3?ie=UTF8&qid=1418242347&sr=8-3&keywords=command+strips

Put 2-3 strips on each side of the back of the board (8-12 strips per board) leaving just the rounded tabs sticking out past the edge of the board. Then peel off all the wall side backings from the strips and place the board on the wall.

You will only have one go at this, if you miss place the board, you will probably have to replace all the command strips to try again, so be careful. Then, press down hard on the location where each command strip is. You will have to leave small ~1" gaps between the boards so that you can get at the command strip tabs in case you need to remove the boards.

> I'd set one of my sensors right on top of the thermostat

Don't do this. Heat rises. Heat from the thermostat will affect the sensor. Stick on the wall next to the ecobee3 using a Command Strip or something else that won't leave a mark when you remove it.

Move your monitor to whatever position will require the most available cable. Gather a little bit of slack at a fixed point on the mount, and zip-tie it in place. Now, when you move your monitor around, you'll know you always enough slack in the cable to avoid tugging on it.

You could also add something on the monitor side, e.g. a right-angle connector in the port, and/or something like this with a rubber band around the hook and the cable to help it stay in position and avoid movement perpendicular to the plane of the port.

These 3M's work fine for my 12.5 oz, and sometimes another pair behind them.

If you have a garage, the simplest way is a couple of these bike hooks, of course I only used them for like 2-3 sticks at a time, but I imagine there'd be larger hooks you could use.

Amazon, my man. Here it is... http://www.amazon.com/gp/product/B0000DH4NL/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I find that the small(er) type of command hooks, found here, work fairly well at holding up ethernet cables. I use these to run my 100ft ethernet from the first floor of my place up to the bedroom. They're a little expensive, but they get the job done.

> as long as your not stressing any wires i think it would be fine to just. i used this for a while for my logitech g430 headphones http://www.amazon.com/Command-Large-Plastic-Hooks-White/dp/B000M3V8XI not sure how well it would work for the hyperx

I like using the Velcro ones and just cut them in half. This way it gives me some sensors that I can move when I need to.

If I have a more permanent sensor somewhere, I use the small refill packs

Command Refill Strips, Small (GP022-64NA) https://www.amazon.com/dp/B0751RPC6Q/ref=cm_sw_r_cp_api_i_-kd3DbQ3H7EYB

3M command strips are what you want.
I mount all my door/window sensors + IR sensors with them.

http://www.amazon.com/Command-Medium-Mounting-Refill-9-Strip/dp/B0014CQGW4/ref=sr_1_1?s=industrial&ie=UTF8&qid=1457396625&sr=1-1&keywords=3m+command+strips

If you are looking for a temporary permanent solution Command strips work wonders. I've nailed a few USB hubs down with them. No marks when you remove them either.

Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_api_7ujHybMH7PA18

We hang our hoops (about 10?) on Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_api_D8jdAb4XJQ3N1

https://www.amazon.com/Tornado-00515-J-Hook/dp/B0050PKJ88

https://www.amazon.co.uk/Command-Decoration-Clips-Christmas-Fairy/dp/B0084M66QS/ref=sr_1_1?ie=UTF8&qid=1509531733&sr=8-1&keywords=damage+free+hooks

These don't, using them for the same purpose now.

I haven't tried this yet but I've seen people use these things:
http://www.amazon.com/Universal-Small-Binder-Silver-10200VP/dp/B00B9GTBYA/ref=sr_1_4?ie=UTF8&qid=1463623365&sr=8-4&keywords=binder+clip

and put a tack on the handle of it to hold it. Instead of a tack some people use this instead with the binder clips:
http://www.amazon.com/Command-Large-Plastic-Hooks-White/dp/B000M3V8XI/ref=sr_1_9?ie=UTF8&qid=1463623579&sr=8-9&keywords=utility+hook

I just use Command Hooks. These ones

Tornado 00520 Large J-Hook

https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_api_M1c1xbWZWD4PP

https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=mp_s_a_1_2?keywords=stickon+headphone+hooks&qid=1562368696&s=gateway&sr=8-2

For the boards I'm using this
Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_apa_i_lhtJDbX3ZERAT

For the helmets I'm just using large command hooks and the chargers I'm using a 3D printed charger/remote holder.

https://www.amazon.com/dp/B0000DH4NL/ref=cm_sw_r_sms_awd_GEw-wbEBD7MEK

[I wondered the same thing earlier] (https://www.reddit.com/r/MechanicalKeyboards/comments/47503q/help_question_for_the_modders_and_custom_builders/). I'm inclined to take a0-c's advice and just do the command strips. They do make those strips without the hooks included.

There are these for a little over $5
https://www.amazon.com/eBoot-Headphone-Headset-Hanger-Monitor/dp/B01M0IRLU3/ref=sr_1_4?s=electronics&ie=UTF8&qid=1487374764&sr=1-4&keywords=Stick-on+Headphone+Hooks

I personally have these
https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_2?s=electronics&ie=UTF8&qid=1487374764&sr=1-2&keywords=Stick-on+Headphone+Hooks

Command strips
Command Refill Strips, Medium, White, 9-Strips https://www.amazon.com/dp/B0014CQGW4/ref=cm_sw_r_cp_api_MX9UBb7438GR5

Buy these, 2 of them

https://www.amazon.com/dp/B0050PLCUW/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=techwewant-20&linkId=d6dffdefe1cee4f277f16d030b388f9c

Command hooks

a hook anchored to your wall next to the outlet?

https://www.amazon.com/Tornado-00515-J-Hook/dp/B0050PKJ88/ref=sr_1_79?s=home-garden&ie=UTF8&qid=1536517409&sr=1-79&keywords=hook

maybe some JB weld epoxy, rubber cement, duct tape and elbow grease to keep it on.

Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_api_p9Hbzb40PVZJT



Or these without the spacers he talked about.

Tornado 00510 Extended U-Hook https://www.amazon.com/dp/B0050PJ2PE/ref=cm_sw_r_cp_api_O8HbzbPYN25FF

There is always space in the apartment, as evidenced by our multiple bikes hanging from various walls.

One option

Another

A third hung from the ceiling

Or a pair of these hooks for only $14!

Tornado 00520 Large J-Hook https://www.amazon.com/dp/B0050PLCUW/ref=cm_sw_r_cp_api_KTdezbAG6Z184

https://www.amazon.com/dp/B0050PLCUW/ref=asc_df_B0050PLCUW4978213/?tag=hyprod-20&creative=394997&creativeASIN=B0050PLCUW&linkCode=df0&hvadid=167123415012&hvpos=1o1&hvnetw=g&hvrand=10176939228955980572&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9013074&hvtargid=pla-272717152766

http://www.amazon.com/Command-Large-Plastic-Hooks-3-Hook/dp/B000M3V8XI/ref=sr_1_2?ie=UTF8&qid=1382731502&sr=8-2&keywords=command+hooks+large

https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=sr_1_5?ie=UTF8&qid=1478219339&sr=8-5&keywords=command+strips

Command Large Utility Hook, White, 3-Hooks, 6-Strips (17003-3ES) https://www.amazon.com/dp/B000M3V8XI/ref=cm_sw_r_cp_apa_.8oPzbCRT2VF5

https://www.amazon.com/Stick-on-Headphone-Hooks-2-Pack/dp/B00P9GYUE2/ref=sr_1_4?ie=UTF8&qid=1506364685&sr=8-4&keywords=headphone+hanger

The Planeswalker art above the TV are actually posters. You could try multiple 3M sticky strips https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4
might take a few since playmats are heavier.

Use these.

Command Large Plastic Hooks, White, 3 Hooks

https://www.amazon.ca/gp/product/B000M3V8XI/ref=as_li_ss_tl?psc=1&linkCode=ll1&tag=thebigaawes06-20&linkId=f6d8e090a62e47f5ad39e51b0099c32a

https://images-na.ssl-images-amazon.com/images/I/81a5WkObjZL._SL1500_.jpg

In case you couldn't find it, this is the comment and (more importantly) this is the wall mount/rack.

Or meant for headphones. I have two, one on the case and one on the wall behind the desk.

http://www.amazon.com/gp/product/B00P9GYUE2?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s01

I got it from Amazon, but I've also seen it at Lowes.

To run ethernet cables throughout my home without wiring through the walls, I used Command Decorating Clips to attach different length Jadaol Cat6 white, flat ethernet cables (e.g., this 100 feet model) to the walls and ceilings. I separated each clip by about 2 feet. Small, simple (unmanaged) gigabit ethernet switches (I have a few of this model, which is about the size of a human hand) provide access points throughout the network while connecting each cable. Guests only notice the entire setup when I specifically mention it to them.

I do believe some people have used these:

https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW/ref=sr_1_1?ie=UTF8&qid=1466642057&sr=8-1&keywords=large+j+hook

Do note that these are the large j hooks. Tornado sells a smaller one which I don't think clears the boosted's wheels.

WARNING: The post above is full of referral links.

Here's a copy with all of OP's referral links removed:

CART

• WEN 7300 Utility Cart
  
• Tornado Hooks of Various Sizes
  
• Sun Joe SPX3000 Pressure Washer
  
• Basic Wood Screws
  
  
  PRODUCTS
  
  
• CG Best Selling Products Kit
  
• CG Honey Dew Snow Foam
  
• CG Butter Wet Wax
  
• CG Diablo Wheel Gel
  
• CG V7 Hybrid Quick Detailer
  
• CG Jet Seal
  
• CG VRP Dressing
  
• CG Bug and Tar Remover
  
• CG Glossworkx Glaze
  
• CarPro Iron X
  
• Shine Society Glass Cleaner
  
• Black Mamba Black Gloves
  
• Zwipes Waffle Weave Towel
  
• 50 Pack of Microfiber Towels
  
• Detailers Brush
  
• Wheel Brush
  
• Viking Wheel Brush
  
  EQUIPMENT
  
  
• Sun Joe SPX3000 Pressure Washer
  
• Sun Joe Pressure Washer Extension Cord
  
• MATCC Snow Foamer
  
• Extension Cord 50ft
  
• TORQ Orbital Polisher
  
  
  

Not an official purpose-built mount, but i couldn't be happier with how this hook worked out for my oculus/touch:

https://www.amazon.com/gp/product/B0050PJ2PE/

Unfortunately those hooks are £53 each here. 😔 https://www.amazon.co.uk/dp/B0050PLCUW/ref=cm_sw_r_cp_api_KdIbzbZZ0R2WS

I got my mount over the weekend but adhesive was stuck to the paper and I couldn't take it off. I ended up taking off all the foam and replaced it with Command Medium Mounting Strips and it seems to be holding up.

Depending on the lag screws you used you might be fine. I did a pair of screws in each 2x4 (1 per joist spanned) as each screw was rated for 300 lbs. The pulleys are all rated at 250lb and the rope is 280lb. The eyes that each pulley hangs from are rated for 200lbs, and the little rings between the pulley and eye are like 300lb. I made sure each point of failure could/should be able to hold the entire weight of the top.

I just bought some of these to type into the ropes, I think they might work really well:

https://www.amazon.com/Tornado-00520-Large-J-Hook/dp/B0050PLCUW

They were in stock at Home Depot. they should avoid weight on the seals and not slip out. I might still do a bungee or something between them, though.

My solution to exactly this issue:

Flat Ethernet cable, tiny 3m cable clips.

The skirting boards in our house are white and the cable is halfway down below the carpet, so most people don't even notice it until I point it out to them. Goes through a doorway without getting in the way, too.

Those flat cables may or may not be great for long distances, but I've got that 25' / 8m one running gigabit and ~11W of PoE and have no issues whatsoever.

Three of these bad boys: http://www.amazon.com/Command-Large-Plastic-Hooks-White/dp/B000M3V8XI/ref=sr_1_4?ie=UTF8&qid=1452097700&sr=8-4&keywords=Command+hooks

Two on the bottom about an inch or two from the end of the sleeve and one on the top in the center.

I use these. They're ok for $10, my only complaint is that it kinda kills the headband on my M50 due to the extra force on it. I don't have the room for headphone stands so I'm stuck with hangers until I change my living arrangements.

Something like this! This have some with velcro and some with just two sticky sides. I used the sticky ones but either would work!
Command Refill Strips, Medium, White, 9-Strips - 17021P https://www.amazon.com/dp/B0014CQGW4/ref=cm_sw_r_cp_apa_i_e1VBCbFSP2G9A

Edit: I spelled velcro wrong

You could but that’s an awful lot of Velcro. I was just going to stick mine directly to the HMD: https://www.amazon.com/Command-Hooks-Value-18-Hooks-17006CLR-18ES/dp/B0084M67P8/ref=mp_s_a_1_9?keywords=3m%2Bhooks&qid=1574521313&sprefix=3m%2B&sr=8-9&th=1&psc=1

It sure does; it's stuck fast. Hell, I can grab it and wiggle it and my whole desk moves

I used these: https://www.amazon.com/Command-Refill-Strips-Medium-9-Strips/dp/B0014CQGW4/ref=pd_sim_60_17?_encoding=UTF8&pd_rd_i=B0014CQGW4&pd_rd_r=SDC263Y1FQE5M2HD6KM3&pd_rd_w=Al9ST&pd_rd_wg=An4o2&psc=1&refRID=SDC263Y1FQE5M2HD6KM3

Just straight stuck on to the desk, none of that velcro-like stuff