#6 in Thermometers
Use arrows to jump to the previous/next product

Reddit mentions of HOLDPEAK 981C Non Contact Digital Laser Infrared Thermometer Temperature Gun Instant-Read -58 to 1022℉ (-50 to 550℃) with 9V Battery and Emissivity 0.1-1.0(Adjustable)

Sentiment score: 3
Reddit mentions: 5

We found 5 Reddit mentions of HOLDPEAK 981C Non Contact Digital Laser Infrared Thermometer Temperature Gun Instant-Read -58 to 1022℉ (-50 to 550℃) with 9V Battery and Emissivity 0.1-1.0(Adjustable). Here are the top ones.

HOLDPEAK 981C Non Contact Digital Laser Infrared Thermometer Temperature Gun Instant-Read -58 to 1022℉ (-50 to 550℃) with 9V Battery and Emissivity 0.1-1.0(Adjustable)
Buying options
View on Amazon.com
or
    Features:
  • 【High Accuracy】Temperature range: -50 ~ 550℃ (-58~1022℉) / Accuracy: ±1.5% or ±1.5℃ / Emissivity: 0.1-1.0(Adjustable) / Response Time: <500ms/Distance Spot Ratio:12:1.
  • 【High Temperature Spot Positioning】Locating a hot spot aim the thermometer outside the area of interest,then scan across with up and down motions until you locate the hot spot.(please turn on the laser to for accurate measuring)
  • 【Versatile Design】Auto Power Shut Off in 7 seconds without any operation ; Low electricity .Optional Laser Target Pointer and Backlight ON/OFF, convenient to accurate targeting and operate in case of poor illumination; ℃/℉ button - switching the displayed temperature from Celsius degree to Fahrenheit degree as you need.
  • 【Safter & Faster Design】Extremely Handy, Consistent & Versatile for Instant Temp Readings in Work or Home Applications. You just need to aim at the target to measure the current temperature consumption.Laser Infrared Thermometer Keep Your Hands Safe.
  • 【What You Get?】 1*HOLDPEAK 981C Infrared Digital Thermometer,1*Instructions,1 *9V batteries ,HOLDPEAK provide 1 year warranty and lifetime technical support.If there are any product issues, please feel free to contact us!
Specs:
Color981C-12:1 Adjustable Emissivity
Height1.5 Inches
Length5.75 Inches
Number of items1
Weight0.29 Pounds
Width3.15 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 5 comments on HOLDPEAK 981C Non Contact Digital Laser Infrared Thermometer Temperature Gun Instant-Read -58 to 1022℉ (-50 to 550℃) with 9V Battery and Emissivity 0.1-1.0(Adjustable):

u/boa249 · 5 pointsr/leopardgeckos

A couple of quick questions. How is her warm side heated? Under-tank heating is pretty much required, but supplemental heat from lights or a CHE can be added as needed. Be sure to monitor the temps for a couple days after adding supplemental heat, to make sure you aren't overheating your leo. You can get a lamp dimmer from Home Depot (or maybe even Wal-mart) to dial back the heat as needed.

How are you monitoring temperatures? I strongly recommend an infrared temp gun to measure surface temps rather than air temps. Especially on the warm side, surface temps are the most important--leos absorb heat through their belly to power their digestive process. As you know, insufficient surface temps will slow or halt digestion, and your leo will not eat.

How does Luna look? Is she stick thin, or a little fat? Post a picture if you can. If her weight is good, she's fine to go a week or two without food. Perhaps she doesn't need to eat as much as you're trying to feed her, and she's rejecting food because she isn't hungry? If she looks healthy enough for it, give her a dish of mealworms (don't let crickets run loose in her enclosure--they will bite her and cause infection) and otherwise don't feed her. If everything else is good, she will eventually get hungry and eat the food available.

Remember, as cold blooded animals, reptiles don't need to burn calories to maintain their body temps. Therefore, they can eat a surprisingly small amount. Growing hatchlings and juveniles actually eat far more than adults.

u/Herherpsnderps · 4 pointsr/leopardgeckos

No worries at all, undertank heater, especially with a wooden ebclosure would want a thermostat just so it doesnt burn. What Ive done ia actually put the heat pad (you can buy these in stores buy Ill make sure to link one) and put tile over it. Tile is a lot safer and ironically more natural to them (arid rocky desert, not really sandy) and will conduct the heat well. To measure temp youll want a digital prob thermometer or what i ususlly recommend more so is a temp gun (will also link). Knowing temps is really important since all their metabolic functions depend on them. You want a 88-90 warm aidd and a 75f cool side. This allows them to regulate themselves.

https://www.amazon.com/gp/aw/s/ref=is_s?k=heat+pad+reptile

https://www.amazon.com/gp/aw/d/B019TRGYW2/ref=mp_s_a_1_3?ie=UTF8&amp;amp;qid=1503263283&amp;amp;sr=8-3&amp;amp;pi=AC_SX236_SY340_QL65&amp;amp;keywords=temp+gun+for+reptiles&amp;amp;dpPl=1&amp;amp;dpID=41Y5W8Q-7aL&amp;amp;ref=plSrch


https://www.amazon.com/gp/aw/s/ref=is_s?k=theromostat+for+reptiles

u/robobot · 3 pointsr/SCREENPRINTING

A couple things that really help with a home set-up:


  • Get one of those fancy extra-special private time Detachable Shower Heads. It will vastly improve your washouts ...especially if you're currently just relying on gravity for water pressure.

  • Get a heat gun if you need an intermediate step between your hair dryer and a proper drying unit.

  • No matter what your drying situation, you need to buy an infrared thermometer for curing.

  • Until you get a press, you could consider picking up a ~ 18" x 18" piece of laminated melamine (Home Depot will cut it down for you) and a couple of one-hand clamps. The melamine is heat resistant so you can use it to print and to cure. And with the clamps, you can secure the bottom edge of your screen to the pallet and kind of simulate proper off-contact.
u/Treereme · 2 pointsr/ballpython

I've been having good luck with these in my enclosures. I have a number of them, and they all agree to within a degree with each other and my other trusted thermometers.

I also use an IR gun style thermometer. I originally had the 981D, but it read like 6 degrees low and the seller replaced it with the 981C which is as accurate as these thermometers typically are (IR reading change by type of materials and the finish on it, which changes emissivity).